WELCOME MAINTENANCE AND REPAIRS/REPLACEMENT OF INTERNAL ELECTRIFICATION

Amount

M&L for preparation of old decorated surfaces of walls by brooming down or steel wire brushing, scrapping down smoke soot, moulds, moss and efflorescent salts and treating oil and greasy spots and thereafter applying one coat of white wash complete all as specified and directed.

M&L for preparation of old decorated surfaces of ceiling by brooming down or steel wire brushing, scrapping down smoke soot, moulds, moss and efflorescent salts and treating oil and greasy spots and thereafter applying one coat of white wash complete all as specified and directed.

M&L for preparation of old decorated surfaces of walls by brooming down or steel wire brushing, scrapping down smoke soot, moulds, moss and efflorescent salts and treating oil and greasy spots and thereafter applying one coat of colour wash complete all as specified and directed.

M&L for preparation of old surfaces of walls including washing, rubbing down and stopping of distempered and painted surfaces of wall and applying one coat oil bound distemper with roller complete all as specified and directed.

M & L for complete removal of existing treatment by scrapping / washing down with water and applying two coats of oil bound distemper over a coat of primer, applying with roller complete all as specified and directed.

M & L white cement based Wall care putty not less than 1mm thick on wall/ceiling new or old surfaces of any description finished even and smooth complete all as specified and directed.

M&L for preparation of old decorated surfaces of walls any description not other wise described over 10 cm width or girth and applying one coat of Plastic emulsion paint on wall and ceiling etc. complete all as specified and directed.

M&L for preparation of old decorated surfaces of ceiling any description not other wise described over 10 cm width or girth and applying two coat of Plastic emulsion paint on wall and ceiling etc. complete all as specified and directed.

M&L for preparation of old decorated wooden surfaces of any description not other wise described over 10 cm width or girth and applying one coat of synthetic enamel paint. complete all as specified and directed.

M&L for preparation of old decorated steel surfaces of any description not other wise described over 10 cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed.

M&L for preparation of old surfaces of walls/slab projections by brooming down or steel wire brushing scrapping down smoke soot, moulds, moss and efflorescent salts and treating oil and greasy spots including washing down,with water and applying one coat of 100% antifungal acrylic emulsion paint in approved shade etc all as per manufacturers instructions including necessary scaffoldings etc,complete all as specified and as directed.

M & L for cutting out cracks (not exc 5mm) to V-section in existing wall/chajjas and cleaning out and filling up with Dr fixit crack seal including necessary scaffoldings complete all as specified and as directed.

M & L for complete removal of existing treatment on surfaces of walls, chajjas etc by brooming down or steel wire brushing scrapping down smoke soot, moulds, moss and efflorescent salts and treating oil and greasy spots washing down with water and freeing the surfaces from all loose dirt, chalk, grease, fungus. Flakes etc applying two coats of 100% Anti fungal acrylic emulsion paint in approved shade over a coat of primer including necessary scaffoldings complete all as specified and as directed.

Taking down cement mortar or lime plaster of any description from stone or brick wall etc including raking out joints, hacking for key scrubbing down with water and disposing off the rubbish materials out side MD and including necessary scaffoldings complete all as specified and directed

Rendering 15mm thick in (1:6) CM on fair faces of brick work or concrete surfaces of walls and finishing even and smooth without using extra cement complete all as specified and directed.

M/L for rendering 5 mm thick in CM 1:3 as in ceiling finishing even and smooth (with out using extra cement) etc complete all as specified and directed.

Rendering 20mm thick in (1:4) cm (in two coats (15+5mm) with both coats mixed with liquid water proofing compound, surface finished even and fair without using extra cement complete all as specified and directed.

M&L for for preparation of new plastered surfaces of walls, chajjas, slab projections and applying two coats of 100% Anti fungal acrylic emulsion paint in approved shade over a coat of primer and including necessary scaffolding complete all as specified and as directed.

M&L for preparation of new plastered surfaces and applying three coats of white wash on wall complete all as specified and directed

M&L for preparation of new plastered surfaces and applying three coats of white wash on ceiling etc complete all as specified and directed

M/L for preparation of new plastered surfaces of walls and applying two coats of distemper oil emulsion over a coat of alkali resistant primer using roller etc complete all as specified and directed.

M&L for applying one coat of dulux weather shield water proof or equivalent on walls etc complete all as specified and directed

M/L for french polishing on surfaces of any description width or girth and including cleaning and preparing the surfaces including a coat of wooden filler on old wooden surfaces one or more coat etc complete all as specified and directed.

Writing letter or figures (block, Roman, Italic, or Indian ) n.ex 30 cm hight complete all as specified and directed.

M&L stops, commas, short lines, dashes, hyphens, brackets,etc.

M&L for Removal of plant growth by injection with chemical glyphospate solution ( 4 % conceneration ) @ 20ml or till refuse by cutting or injection in stem of plants or roots at 30mm. The area shall then be sprayed with solution 25ml glyphosphate ( 4% concent) dulited with 1 ltr of water. All roots / plants shall be removed completely and making good the distrubed surface and painted with cement base or acrylic paint all as directed by EIC.

Day to day repairs to WHB & WC with fittings like as leaking bib taps, pillar taps, mixers, stop cocks aby tightening and providing washer, repair to float valves, repairs to internal assemble low level cistern by adjustments, etc as required at site to the satisfaction of user as assigned complete all as specified and directed.

Taking down chowkhats or frame with shutters (without taking off shutter from the frames) exceeding 1.5 sqm but n exc 4 sqm completed as specified and directed.

Taking down Chowkats or frames with shutters (without taking off shutter from the frames) not exceeding 1.5 Sq. M each

Taking down shutter of any description exc 1.00 but n exc 2.00 sqm each complete all as specified and directed.

Resecuring or easing & adjusting without taking down door shutter of any description exc 1.00 but n exc 2.00 Sqm each complete all as specified and directed.

Taking down door / window shutter of any description exc 1.00 but n exc 2.00 sqm each and refixing in the same opening after easing, adjusting & renewal of unserviceable screws etc complete all as specified and directed.

Taking down door / window shutter of any description n exc 1.00 sqm each and refixing in the same opening after easing, adjusting & renewal of unserviceable screws as required etc complete all as specified and directed.

Supply & Fixing in repairs sheet glass 4.8 mm thick in glazing n exc 0.5 sqm each with rubber and aluminium beading/packing with rubber gasket complete as specified and directed.

Supply & fixing in repairs aluminium alloy wire cloth 0.45mm nominal dia of wire and average width of aperture 1.40mm and fixed with aluminium wire staples complete all as specified and directed

S&F II nd class Hard Wood plain, solid straight chawkhats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints, completed as specified and directed.

S&F MS flat iron as in hold fast and similar work as specified Gde Fe 410-0 or Fe 310-0.

M&L Flush shutters 30mm, solid core construction, with partical board core and ply wood face panels, commercial type on both sides complete all as specified and directed.

S&F 35mm II nd class hard wood glazed and skelton shutters, open rebated and prepared to receive glass, gauge etc (without sash bars) edge of framing plain, chamfered or rounded, fitted with cut and mitred bends for securing glass etc. size of members of shutters as specified in SSR, Part I, section -8, clause 8.20(a) supplied and fixed to chowkhats.

Supply & Fixing aluminium anodised XPM Jali, 0.45mm nominal dia with 1.4mm average width of aperature complete all as specified and directed.

S&F Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing.

S&F Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, suppling & fixing in opening as per specification & drawing complete all as specified and directed

S&F Aluminium (extruded section body) Door closer hydraulically regulated, designation No. 1 universal type, suitable for door shutters up to 700 mm in width and of weight not more than 35 kg and fixed complete all as specirfied and directed.

S&F stainless steel butt hinges 100mm size complete all as specirfied and directed.

S&F 150mm long floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring. complete all as specirfied and directed.

S&F in repairs 150mm long floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring. complete all as specirfied and directed.

S/F 150mm length extruded aluminium alloy handles,fabricated type, anodised.

S/F in repairs 150mm length extruded aluminium alloy handles,fabricated type, anodised.

S&F 200mm length aluminium anodised barrel tower bolt of extruded section. complete all as specirfied and directed.

S&F in repairs 200mm length aluminium anodised barrel tower bolt of extruded section. complete all as specirfied and directed.

S&F 150mm length aluminium anodised barrel tower bolt of extruded section. complete all as specirfied and directed.

M&L 300mm, ordinary rat tail rod pattern springs including roller and roller plate mild steel complete and fixed in repairs complete all as specified and directed.

S&F aluminium alloy, anodised, sliding door of length 300mm, with hasp and staple (bolt type) and fixing clip of sheets, cast or extruded section and fixing bolt and sliding bolt of extruded section or cast aluminium alloy and fixed. complete all as specified and directed.

M&L PCC Block for hold fast and similar work etc 1 : 2 : 4 type B-1(using 20mm graded stone aggregate) complete all as specified and directed.

M&L preparing surfaces of wood or wood based materials, any description ends of posts, backs of chowkats, etc and treating with tar or coal tar black paint area tarred exc 0.1 sqm but n exc 0.5 sqm each complete all as specified and directed..

Preparing surfaces of small articles such as stop, covers, gully gratings, holdfasts, ends of posts, backs of chowkats etc area n exsc 0.1 sqm each and treating with tar or coal tar black paint complete all as specified and directed.

M&L for preparation of new wood and wood based surfaes any description, not otherwise described oer 10cm width or girth one coat of pink primer and application of two coats of synthetic enamel paint on new wooden surfaces.

Dismantling floor, hearth or wall tiling any description and thickness including cement mortar bedding (but not backing) and removing rubbish off the premises.

M&L PCC 20mm thick type B0, 1 : 2 : 4 (12.5mm graded aggregate) in sub flooring complete all as specified and directed..

M&L non-skid coloured joint free ceramic tiles 7 to 8 mm thick area of each tile exceeding 0.11 Sqm but not exceeding 0.18 sqm, in floors etc set and jointed in neat cement slurry over and including provision of bedding layer 15 mm thick in CM 1 : 4 complete all as specified and directed.

M&L glazed ceramic jointless coloured tiles in vertical surface 350x250x7mm / 450 x 350 x 7mm set and jointed in neat cement slurry over and including provision of bedding layer 10mm thick in CM 1 : 3 complete all as specified and directed.

M&L non-skid coloured joint free ceramic tiles 7 to 8 mm thick area of each tile exceeding 0.18 Sqm but not exceeding 0.38 sqm, in floors etc set and jointed in neat cement slurry over and including provision of bedding layer 15 mm thick in CM 1 : 4 complete all as specified and directed.

S&F PVC cabinet mirror in repairs of size 600X450 mm complete all as specfied and directed.

Demolition of cement concrete in ground floor / paving not exceeding 15Cm thick below or above GL unreinforced complete all as specified .

M&L for cement concrete type C-1, 1:3:6 (20 mm graded aggregate) 75 mm thick as in plinth protection finished even and smooth without using extra cement complete all as specified and directed.

M&L bitumastic filling the joint of 10mm wide and 75 mm depth comprising of one part of heated bitumen blown grade (85/25) any penetration and 2 part of sand by weight all as specified and directed.

M&L, 18 to 20 mm thick machine cut and machine polished Kota stone slab in single piece in jambs and in double piece in cills on vertical surfaces and over 15mm thick cement mortar 1:3 backing coat jointed with grey cement slurry mixed with pigment to match the shade of slab including rubbing and mirror polishing and necessary edge moulding befor fixing of kota stone complete.

S&F extruded Powder coated aluminium section as in window, ventilation,door (powder coated 50 micron in blackcolour) with movable, openable or fixed type shutter or any pattern as directed, aluminumsection medium weight of series B or size as directed by the Engr in charge cut to size , jointed toghter including rubber beading and all necessary fitting complete all as specfied and directed (Make: Jindal/Hindalco) Note :- (i) Only aluminum sections measured and paid in this item. (ii) Rate quoted by the contractor shall deemed to be inclusive of all neecssary fittings and fixture such as roller,handle,locks etc (iii) Glass pane and XPM jali measured and paid under supply only rate.

S & F aluminium grill conforming to DG- 102 of Deco Grill or equivalent , (10mm X 5.2mm) thick of approved design or equivalent as approved by Accepting Officer and fixing with and including 'F/U' channel not less than 1.5mm thick complete all as specified and directed.

Supply only sheet glass 5.00 mm thick in glazing with rubber and aluminium beading/packing with rubber gasket complete as specified and directed.

All as per above item No 71 but one side frosted.

Supply only aluminium anodised XPM Jali, 24 gauge with 1.4mm average width of aperature complete all as specified and directed.

S&F tubular towel rail / curtain rod 20mm dia Aluminium anodised & fixed in repairs complete all as specified and directed.

S&F in repairs Aluminium brackets for tubular towel rail 20mm dia complete all as specified and directed.

M&L tubular towel rail, 20mm dia, D type, 60cm long between flanges of brass chromium plated in repairs complete all as specified and directed.

Taking up or down steel tubing 15mm bore of pipe and connections including cleaning for refixing etc as required complete all as specified and directed..

All as per item no. 77 above but 20mm bore of pipe complete all as specified and directed.

M&L tubes medium grade galvanised, with all fittings and fixed complete to walls or ceiling or laid in floors 15mm bore dia.

All as per item no. 79 above but 20mm bore dia complete all as specified and directed.

M&L Brass chromium plated shower rose 125mm size including fixing to steel pipe or union in repairs complete all as specified and directed.

M&L Hat and coat hooks, solid body of aluminium, 175mm to 250mm long and fixed in repairs complete all as specified and directed.

M&L in repair Wash basin, Vitreous China white (Flat back) 630 x 450mm including brackets, pinning in ends of brackets or erecting stand including fixing of waste pipe and pillar type etc ( Suppy of pillar tap and waste pipe shall be measured separately) complete all as specified and directed.

Supply only pillar tap cast copper alloy chromium plated fancy type complete all as specified and directed.

S&F in repairs pillar tap cast copper alloy chromium plated fancy type complete all as specified and directed.

M&L in repair stop valves 15mm bore dia, cast copper alloy fancy type, chromium plated with long shank and cup concealed type, screwed down high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions in repairs complete all as specified and directed.

All as per item no. 86 above but angle cock Chromium plated 15mm bore dia complete all as specified and directed.

S&F health faucet (Hand wash for EWC) first quality including CP bracket to hold the faucet with CP pipe of suitable length in wall all as per manufacture instructions and as directed.

M&L Glass Assembly sheet glass consisting of 5.5mm thick sheet glass 12cm wide with chromium plated bracked guard and railing 60cm long in repairs complete all as specified and directed..

M&L bib tap brass 15mm bore dia chromium plated long shank fancy type with curtch or butterfly handle , screwed down, screwed for iron pipes complete in repairs complete all as specified and directed.

S&F sink with drainage board made of stainless steel 1mm thick kitchen with plugs, washers and wasters , including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915 mm x 460mm bowl size 410 mm x 330 mm x 160 mm and fixed in repairs complete all as specified and directed.

M&L Stainless steel floor trap, plain with grating removeable & refixable type including jointing with solvent cement 75mm dia of outlet complete all as specified and directed.

M&L Stainless steel floor trap, plain with grating removeable & refixable type including jointing with solvent cement 100 mm dia of outlet complete all as specified and directed.

S&F Low density polyethlene (LDPE) pipe of pressure rating 6 Kgf / Sqcm 32mm dia complete all as specified and directed.

S&F Low density polyethlene (LDPE) pipe of pressure rating 6 Kgf / Sqcm 40 mm dia complete all as specified and directed.

Cleaning of PVC water tanks at any height (on accessible / inaccessible roofs) by removing all scale, dirt, mud any foreign material and removing and removing accummulated silt, other dirty substance, algae, fungus and other bacterial material from sides / bottom of tank cleaning shall be done by draining / pumping out water / sludges from bottom from wall / floor / roof by high pressure clleaning method with jet set and again cleaning the tank with fresh water. Disinfecting by using UV radiator and approved chemical (Chloriten) after cleaning writing following letter figures on black back ground with white enamel paint of capacity not exceeding 300 ltrs :- (i) Date of cleaning (ii) Next date of cleaning. (iii) Remove of the existing lettering / figures completely.

All as per item no. 96 above but tank of capacity exc 501 ltrs but not exceeding 1000.00 ltrs

All as per item no. 96 above but tank of capacity exc 1001 ltrs but not exceeding 1500.00 ltrs

All as per item no. 96 above but tank of capacity exc 1501 ltrs but not exceeding 2000.00 ltrs

All as per item no. 96 above but tank of capacity exc 3001 ltrs but not exceeding 5000.00 ltrs

S&F gun metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed bore of 20 mm in repairs complete all as specified and directed.

S&F gun metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed bore of 25 mm in repairs complete all as specified and directed.

M&L in repairs Ball valve high pressure of PTMT with epoxy coated Aluminium rod & highdensity plastic ball screwed for iron pipe and fixed complete for 20mm dia complete all as specified and directed.

M&L in repairs Ball valve high pressure of PTMT with epoxy coated Aluminium rod & highdensity plastic ball screwed for iron pipe and fixed complete for 25mm dia complete all as specified and directed.

S&F stain less steel plate rack fixed on wall etc complete, made out of 1.00 mm thick of over all size 0.75x0.75M with shelves and racks complete as approved by GE.

Dismantling of wrought iron or mild steel work in any description and in any position

M&L rolled sections as in framing for cladding, glazing and the like fixed with angle cleats and connecting plates etc conforming to Fe 410-W (Gde-E-250) complete all as specified and directed

M&L roof trusses (framed) trussed, purlins, crange gantries, rails and fastenings and heavy bracket framing (beam, tee, angle, channel or flat sections) including distance pieces, cleats etc conforming to Fe 410-W (Gde-E-250) complete all as specified and directed.

S&F Pre-painted galvalume aluminium zinc (150micron) coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering / cladding to wall, fixed with self tapping screws as specified.

S&F Pre-painted galvalume aluminium zinc(150 micron) coating GI based Plain steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering / cladding to wall, fixed with self tapping screws as specified.

Prepration of new steel surface of any description not exc 60cm in girth and applying two coats of synthetic enamel paint over a coat of rex oxide primer complete all as specified.

M&L for post constn, antitermite treatment along internal wall, concrete masonry work, using cholropyriphos emulsion conforming to IS-3244(with 20%EC) @ 0.5 lit / hole at downward angle of 45 degree @ 300mm c/c including with cement mortar 1:2 to match the existing surface complete as specified and directed.

M&L for providing and injecting chemical chloropyrphos emulsion conforming to IS-3244(with 20% EC) for post construction antitermite treatment along external wall below concrete or masonry apron @ 2.25 litre per running meter including drilling and plugging note complete all as specified and directed.

M&L for post construction antitermite treatment at point of contact of wood work by chemical emulsion ( in oil or kerosene based solution) @ 0.5 ltr/hole by drilling 6mm dia hole at a downward angle of 45 degree at 150 mm centre to cetre and sealing the same complete all as specified and directed.

Taking down carefully copper/alumunium point wiring for light, fan, bell, socket or power complete including fittings such as switches, ceiling roses pendents regulators, sockets and tube light fittings etc, removing materials from site or for reuse refixing and making good distrubed surface of wall, floors etc all as specified and directed.

Taking down carefully copper/alumunium Sub main wiring from the position and removing materials from site or for reuse refixing and making good distrubed surface of wall, floors etc all as specified and directed.

Taking down main switches DBs with sheet metal enclosure 2/4/6/8 way SPN/TPN/DBs etc all as specified and directed.

Material and labour for point wiring complete with 1.5 sqmm PVC insulated unsheathed 1100 volts grade FRLS cable stranded copper conductor single core in PVC casing caping of 20/25 mm complete with sunk iron pressed steel terminal box for fitting mounting switch/ sockets regulators etc with laminated sheet 3 mm thick cover and with 1.5 sqmm PVC insulated copper conductor earth wire and connected to earth dolly for one light point controlled by one switch all as specified and directed.

All as per item No 109 herein above but fan point controlled by one switch complete all as specified and directed.

All as per item No 109 above but for one 3 pin switch socket 5 Amp single pole one way on same board with other switches including continuous 1.5sqmm PVC insulated copper conductor earth wire to common wire earth and connecting to earth dolly complete all as specified and directed.

All as per item No 109 herein above but for one 3 pin switch socket 5 Amp independent complete all as specified and directed.

All as per item No 109 above but for 3 pin switch socket outlet 15 Amp independent with cable 2.5 sqmm unsheathed stranded 1100 Volts grade complete with 1.5 sqmm PVC insulated earth wire and connecting to earth dolly complete all as specified and directed.

All as per item No 109 above but for one bell point controlled by 5 Amps bell Push complete all as specified and directed.

M&L for point wiring complete with 1.5 sqmm PVC insulated unsheathed 1100 volts grade FRLS cable stranded copper conductor single core partly concealed in wall through PVC conduit and concealed accessories and partly surface on ceiling, beams and cloumns through casing caping and accessories of size 20/25mm complete with modular box and plate for fitting mounting switch/sockets regulators with 1.5 sqmm PVC insulated copper conductor earth wire and connected to earth dolly for one light point controlled by one switch complete

All as per item Ser No 115 above but Fan point controlled by one switch complete

All as per item Ser No 115 above but for one 3 pin socket 5 Amp single point pole one way on same board with other switches including continuous 1.5 sqmm PVC insulated copper conductor earth wire to common wire earth and connecting to earth dolly complete.

All as per item Ser No 115 above but for one 3 pin socket 5 Amp independent complete all as specified and directed

All as per item Ser No 115 above but for 3 pin switch socket outlet 15 Amp independent with cable 2.5 sqmm unsheathed stranded 1100 Volts grade complete with 1.5 sqmm PVC insulated earth wire and connecting to earth dolly complete all as specified and directed.

All as per item Ser No 115 above but bell point controlled by 5 Amp bell push all as specified and directed

Supply and fix switch piano type 5 Amp single pole one way complete all as specified and directed.

Supply and fix in replacement of switch modular type 6 amp single pole one way 230 V all as specified and directed.

Supply and fix in replacement of switch piano type 15 Amp single pole one way complete all as specified and directed.

Supply and fix in replacement of switch modular type 16 amp single pole one way 230 V all as specified and directed.

Supply and fix in replacement of bell push 5 Amp flush type single pole 230 volts one way complete all as specified and directed.

Supply and fix in replacement of bell push 6 Amp modular type single pole 230 volts one way complete all as specified and directed.

Supply and fix in replacement of socket multi purpose 5 pin 5 Amp flush type complete all as specified and directed.

Supply and fix in replacement of socket outlet multi purpose 5 pin 6 Amp modular type complete all as specified and directed.

Supply and fix in replacement of socket outlet multipurpose 3 pin 16 Amp and 3 pin 6 amp modular type 2 in 1 complete all as specified and directed.

Supply and fixing ceiling fan regulator rotary type 120 watts all as specified and directed.

Supply and fixing in replacement of ceiling fan regulator modular type 120 watts all as specified and directed.

Supply and fix in replacement of ceiling rose surface backelite three terminal complete all as specified and directed.

Supply and fix in replacement of call bell AC, 230 Volts single pole all as specified and directed.

Supply & fixing Modular white cover plate with frame 8 Module

Supply & fixing Modular white cover plate with frame 6 Module

Supply & fixing Modular white cover plate with frame 3 Module

Supply & fixing modular Metal Flush box 6/8 Module

Supply & fixing modular Metal Flush box 3 Module

Supply and fix in replacement of MCB TP 32 Amps, 415 volts complete all as specified.

Supply and fix in replacement of MCB TP 63 Amps, 415 volts complete all as specified.

Supply and fix in replacement of MCB SPN 240 Volts 32 Amp breaking capacity 10 KA rating complete all as specified.

Supply and fix in replacement of MCB SPN 240 Volts 63 Amp breaking capacity 10 KA rating complete all as specified.

Supply and fix in replacement of MCB SP 240 Volts 6 to 32 Amps breaking capacity 10 KA rating complete all as specified and directed.

Supply and fix in replacement of MCB SP 240 Volts 40 Amps breaking capacity 10 KA rating complete all as specified and directed.

Supply and fix in replacement of MCB SP 240 Volts 63 Amps breaking capacity 10 KA rating complete all as specified and directed.

S&F LED tube light fitting integral type 1x20W, 230V, connector block etc complete with all accessories internally prewired and including connecting up with twin core twisted flexible copper conductor cable with suitable size all as specified and directed.

S&F LED tube light fitting integral type 1x10 W, 230V, connector block etc complete with all accessories internally prewired and including connecting up with twin core twisted flexible copper conductor cable with suitable size including dismantling of unserviceable tube light all as specified and directed.

Supply and fix in repairs single pole and neutral enclosure with a two pin and earth plug and socket complete with one single pole MCB 20 Amp complete all as specified.

Supply and fix sheet metal enclosure powder coated for MCB DB SPN 8 way double door type with din rail and bus bar including making good to the disturbed surface matching with the existing complete all as specified and directed.

M&L in repairs for sub main wiring two run of size 4 sqmm PVC insulated electric power FRLS cable (heavy duty) 1100 volts grade with stranded copper conductor with 4.0 sqmm PVC insulated copper conductor earth wire in casing caping of suitable size (three run of 4 sqmm cable and one run of PVC conduit / casing caping will be measured as one unit) including dismantling of existing unserviceable submain wiring complete all as specified and directed.

M&L in repairs for sub main wiring two run of size 6 sqmm PVC insulated electric power FRLS cable (heavy duty) 1100 volts grade with stranded copper conductor with 6 sqmm PVC insulated copper conductor earth wire in PVC casing caping of suitable size (three run of 6 sqmm cable and one run of PVC conduit / casing caping will be measured as one unit) including dismantling of existing unserviceable submain wiring all as specified and directed.

Supply and fix sheet metal enclosure powder coated for MCB DB SPN 12 way double door vertical type with din rail and bus bar including making good to the disturbed surface matching with the existing complete all as specified and directed.

Supply and fix in repairs sheet metal enclosure powder painted MCCB DB TPN 415 Volts 4 way double door vertical type with 200 Amps rated bus bar din rail neutral link with suitable for MCCB as incomer all as specified and directed

Supply and fix in repairs sheet metal enclosure powder painted MCB DB TPN 415 Volts 6 way double door vertical type with 200 Amps rated bus bar din rail neutral link with suitable for MCCB as incomer all as specified and directed

Supply and fix in repairs MCCB 415 volts 25 KA three pole 25 to 100 Amps fixed type complete all as specified.

Supply and fix in repairs MCCB 415 volts 36 KA four pole 160 Amps fixed type complete all as specified.

S&F LED tube light fitting integral type 1x20W, 230V, connector block etc complete with all accessories internally prewired and including connecting up with twin core twisted flexible copper conductor cable with suitable size all as specified and directed.(Note : Replacement for normal tube light 30/36 W to LED tube light 20W)

S&F LED tube light fitting integral type 1x10 W, 230V, connector block etc complete with all accessories internally prewired and including connecting up with twin core twisted flexible copper conductor cable with suitable size including dismantling of unserviceable tube light all as specified and directed.

Material and labour in repair for earthing complete with GI earth plate electrode 600x600x6 mm thick burried directly in ground (earth pit not less than 2.25 mtr deep below ground lavel) with top edge of the plate not less than 1.5mtr below normal ground lavel connected to GI earth strip 32 x 6 mm by mean of bolts, nuts, check nuts and washer of brash all as shown in electrical plate No 5 connected to earthing test point all as specified or indicated including PCC pit and CI cover fullel with watering pipe, wire mess and copper lugs etc GI protection pipe 40 mm dia medium grade including testing on completion all as specified and directed.

Deduct Credit for Demolished/ Dismantled material Rs. (-) 1,22,190.00 (Minus) as listed in Schedule of Credit Note: Tenderers will not quote against this item being a tentative amount to be considered to arrive at the 'Contract Sum'

singh construction co

M/S VISHRANTA CONSTRUCTION

M/s. Deepak Traders

R K TYAGIS