Construction of Kitchen Shed and renovation of Dining Hall of Bar Association inside the premises of Old Court Complex building at Kendrapara Buildings.

Dismantling and removing doors, windows and ventilators including removal of frame, hinges, fastening and stacking the same for reuse and removing the debris within 50m lead etc. complete.

Earth work in Hard Soil or Gravelly Soil within 50m initial lead and 1.5m initial lift including rough dressing and breaking clods to maximum 5cm to 7cm and laying in layers not exceeding 0.3m in depth and as per the direction of Engineer-in-charge.

RCC work of M-20 grade including cost of Centering and shuttering using 20mm and down grade size black hard granite (Crusher Broken) chips of approved quality from approved quary including the cost of all materials, cost of all labour, conveyance, taxes, loading, unloading, T&P, royalty, labour cess, all complete as per the direction of Engineer-in-charge but excluding the cost of steel reinforcement.

Cutting, Straightening, coiled or bent up MS Rod of TOR steel using SAIL/RINL/TATA/JINDAL/SHYAM Steel including bending, binding,welding and joining if necessary and tying the grills and placing in position as required for RCC work and hoisting, lowering laying icluding cost, conveyance, taxes of MS rod or TOR steel and binding wire of 18 to 20 gauge and labour required for the work for bending,binding and tying the grills etc. complete.

Providing Fly-Ash Brick masonry work in Superstructure using Fly-Ash Bricks of size 250mm x 120mm x80mm in cement mortar (1:4) including the cost of all materials, cost of labour, conveyance, taxes, loading, unloading, royalties, labour cess, scaffolding, curing for required period, T&P, etc. all complete as per the direction of the Engineer-in-charge.

Providing 12 mm thick cement plaster in cement mortar (1:6) including the cost of all materials, labour, conveyance, taxes, loading and unloading, labour cess, royalties, scaffolding, watering and curing, T&P etc. complete as per direction of the Engineer-in-charge.

Supplying, fitting and fixing of G.I.doors/windows/grill gate made out of square bars, angle, channel, flat, plate, Hollow Pipes, etc painted with red oxide primer cost of all materials, labour, conveyance, taxes, loading, unloading, T&P, etc. all complete.

Supplying, fitting and fixing of G.I. grills in windows made out of G.I. square bars, angles, flats, etc painted with red oxide primer cost of all materials, labour, conveyance, taxes, loading, unloading, T&P, etc. all complete.

Supplying, fitting and fixing Vitrified industrial floor tiles of appoved make and size (300mm x 300mm) confirming to IS:4457 laid on 20mm thick cement mortar (1:4) (1 cement : 4 Course Sand) and filling joints with white cement of approved quality including cost, conveyance, taxes, cost of all labour, labour cess, etc. as per the direction of Engineer-in-Charge.

Supplying, fitting and fixing Glazed ceramic wall tiles on 12mm thick cement mortar (1:3) jointed with neat cement slurry mixed with colouring pigments to match the colour and shade including the cost of all materials, cost of all labour, conveyance, taxes, loading & unloading, T&P, watering and curing etc. complete.