CAMOUFLAGE PAINTING TO BOUNDARY WALL IN DOMESTIC AREA AT AF STN BHISIANA

Amount

M&L for complete removal of existing treatment, by using mechanical steel brushes and preparing un-decorated surface of wall or concrete surfaces including brooming down or steel wire brushing; scrapping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots complete all as specified and directed by Engineer-in-Charge.

M&L for applying two coats of Exterior emulsion paint on old surfaces of wall or concrete in camouflaging pattern @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer of same make applied @ 0.90 litre/ 10 sqm as per new sigma pattern generated by the station authority and RGB values variation from 110 to 171 by using 4 to 5 colour shades as per approved pattern at a height n. exc. 25 mtr as per sample approved by GE complete all as specified and directed by Engineer-in-Charge. Note: The %age and shades of the colours may change as per pattern without any financial effect.

Taking down cement of cement lime plaster on brick or concrete surfaces, etc. including raking out joints, hacking for key, scrubbing down with water, etc. complete all as specified and directed.

M&L for 15 mm thick rendering on in CM 1:4 on fair faces of brick work or concrete surfaces of wall, SWTs with water proofing compound as per manufacturer's instructions etc complete all as specified and directed by Engineer in Charge.

Supply only Liquid water proofing compound all as specified and as directed by Engineer in Charge.

M&L for preparing new plastered surface of wall , concrete surfaces and applying two coats of exterior emulsion paint in camouflaging pattern @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer of same make applied @ 0.90 litre/ 10 sqm as generated by the station authority and RGB values variation from 110 to 171 by using 4 to 5 colour shades as per approved pattern at a height n. exc. 25 mtr as per sample approved by GE complete all as specified and directed by Engineer-in-Charge. Note: The %age and shades of the colours may change as per pattern without any financial effect. Note for Item No 01 to 6: (i) Engineer-in-Charge shall ensure complete quantity of material as per manufacturer's instruction shall be brought out by the bidder and to be deposited in MES Store Yard of AGE B/R I before commencement of work. The material shall be issued to the bidder on daily basis as per requirement at site and record of the same shall be kept by Engineer in Charge. (ii) Double Scaffolding shall be provided by the bidder for execution of work, where required, rate for the same is included in unit rate quoted by the bidder and nothing extra shall be paid to the bidder on this account (iii) All safety measures shall be provided by the bidder to the labourers and nothing extra shall be paid by the department on this account. (iv)Due to electric fence on perimeter wall, special permission is to be required for execution of work & the same is required to be obtained from the Engineer in Charge before commencement of work but note that the work is required to be completed within the stipulated time.

RAKESH KUMAR GARG & CO.

SATTYAM BUILDERS