Loading
Loading…
Loading…
Tender Value
₹1.9 L
EMD Value
₹3,884
Closing Date
5 Aug 2026, 6:00 pmClosed
Executive Engineer REW Doda
Executive Engineer REW Doda
Shed at Shamshanghat Ward 1 Pyt Dandi Kansar Block Bhaderwah (PRIs Grant)
2026_RDPR_317673_4
e-NIT No 42 of REW Doda 2026-27 Dated.24.07.2026
Open Tender
Civil Works
Percentage
30 days
Doda
Please refer Tender documents.
2 documents required · 2 mandatory
₹600
Rural Development and Panchayati Raj
₹3,884
24 Jul 2026
24 Jul 2026
6 Aug 2026
24 Jul 2026
5 Aug 2026
24 Jul 2026
This is a percentage-rate BOQ. The schedule below shows estimated quantities and rates. Bidders quote a single percentage above or below the total estimated cost.
| Sl No | Description | Qty | Unit | Est. Rate | Est. Amount |
|---|---|---|---|---|---|
| 0.0 | Earth work in excavation by manual means in All Kinds of Soil | 8.04 | Cum | 592.9 | ₹4,766.92 |
| 0.0 | Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with:1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) | 2.21 | Cum | 5,733.6 | ₹12,671.26 |
| 0.0 | Centering and shuttering including strutting, propping etc. and removal of form for: Foundations, footings, bases of columns etc. for mass concrete. | 8.55 | Cum | 286.35 | ₹2,448.29 |
| 0.0 | Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with: 1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size) | 3.64 | Cum | 5,202.9 | ₹18,938.56 |
| 0.0 | Cement concrete flooring 1:2:4 (1cement: 2 coarse sand: 4 graded stone aggregate) finished with a floating coat of neat cement including cement slurry and curing complete, but excluding the cost of nosing of steps etc. complete.11.3.2 40mm thick with 20 mm nominal size stone aggregate. | 26.8 | Sqm | 510.25 | ₹13,674.7 |
| 0.0 | Structural steel work in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete.Welded | 695.39 | kg | 138.2 | ₹96,102.9 |
| 0.0 | Providing and fixing precoated galvanized iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.50 mm (+ 0.05 %) total coated thickness with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by Engineer-in-charge. The sheet shall be fixed using self drilling /self tappingscrews of size (5.5x 55 mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. | 39.56 | Sqm | 706.5 | ₹27,949.14 |
| 0.0 | Providing ridges or hips of width 60cm overall width plain G.S. sheets fixed with polymer coated J. or L hooks, bolts and nuts 8mm dia G.I. limpet and bitumen washers complete. 0.50 mm thick with zinc coating not less than 275 gram/m2 | 8.6 | Mtr | 690.85 | ₹5,941.31 |
| 0.0 | Carriage of Sand | 3.19 | Cum | 907.28 | ₹2,894.22 |
| 0.0 | Carriage of Agg | 6.18 | mtr | 907.28 | ₹5,606.99 |
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 1.33 MB
BOQ_1042301.xls
BOQ • 0.24 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .