Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Tender Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Status |
|---|---|---|
| 1 | Admitted-Fee/PreQual/Technical AT MOUZA BALTABARI JN NO 88 PO PS BAGDOGRA NAXAIBA DE DARJEELING PIN 734009 | DARJEELING | WEST BENGAL | 734009 | Admitted-Fee/PreQual/Technical |
| 2 | Admitted-Fee/PreQual/Technical | Admitted-Fee/PreQual/Technical |
| 3 | Admitted-Fee/PreQual/Technical | Admitted-Fee/PreQual/Technical |
| 4 | Admitted-Fee/PreQual/Technical AGRAWAL COLONY KHADIA BAZAR KHADIA YOGICHAURA SHAKTINAGAR SONBHADRA UTTAR PRADESH 231222 | SONBHADRA | UTTAR PRADESH | 231222 | Admitted-Fee/PreQual/Technical |
Tender Value
₹2.9 Cr
EMD Value
₹6 L
Closing Date
18 Feb 2026, 5:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
SE, CMC-II, Obra
Office of the SE, CMC-II, Obra (Sonebhadra)
Biennial work of O and M of filtration plant Sector-10, STP, RO, operation of ETP, R and M of water supply at BTPS, CISF and Township, sprinkling of Fogging and antilarva OTPS, Obra
2026_RVUNL_1107595_1
13/SE(CMC-II)/CMD-V/25-26
Open Tender
Civil Works - Others
Fixed-rate
730 days
Obra Project Colony and Plant Area, Obra
As per PQC
3 documents required · 3 mandatory
₹5,900
Dy. CAO, CFA and BO, BTPS
₹6 L
17 Apr 2026
20 Jan 2026
20 Feb 2026
20 Jan 2026
18 Feb 2026
20 Jan 2026
20 Jan 2026 - 18 Feb 2026
Earth work in excavation by mechanical means (Hydraulic excavator) / manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m.All kinds of soil.
Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20cm in depth,consolidating each deposited layer by ramming and watering, lead upto 50 m and lift upto 1.5 m.
Cutting road and making good the same including supply of extra quantities of materials i.e. aggregate, moorum screening, red bajri and labour required.Water bound macadam
Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level :"1:2:4 (1 cement : 2 coarse sand (zone-III) : 4 graded stone aggregate 20 mm nominal size).
Providing &fixing of following GI.fittings / valve as per ISI. wherever required in distribution net work of water supply system for completion of work.G.I.TEE IS: 1879 / 1987 15x15x15mm.Wt. not less than 130 gm.
Same as Item no 4.1 but for 20x20x20mm. Wt. not less than 187 gm.
Same as Item no 4.1 but for 20x20x15mm. Wt. not less than 172 gm.
Same as Item no 4.1 but for 25x25x25mm. Wt. not less than 210gm.
Providing &fixing of following GI.fittings / valve as per ISI. wherever required in distribution net work of water supply system for completion of work. GI. SOCKET IS: 1879 / 1987 15mm.Wt. not less than61 gm.
Same as Item no 5.1 but for 20mm.Wt. not less than93 gm.
Same as Item no 5.1 but for 25mm.Wt. not less than140gm.
Providing &fixing of following GI.fittings / valve as per ISI. wherever required in distribution net work of water supply system for completion of work. G.I.ELBOW IS: 1879 / 1987 15mm.Wt. not less than 91 gm.
Same as Item no 6.1 but for 20mm.Wt. not less than 137 gm.
Same as Item no 6.1 but for 25mm.Wt. not less than209 gm.
Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) :20 mm nominal bore
Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) :25 mm nominal bore
Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) :40 mm nominal bore
GI./ CI Plug of approved quality. 15mm.dia.not less than 20 gm.
Providing connection of GI. /CI. Pipes after making hole cutting, threading in the pipe and putting nipple. 15mm dia.
Same as Item no 9.1 but for 20mm dia
Same as Item no 9.1 but for 25mm dia
Providing and making lead connection of following dia pipes including cost of lead, labour and T&P as required. 80mm dia.
Same as Item no 10.1 but for 100mm dia.
Same as Item no 10.1 but for 150mm dia.
Same as Item no 10.1 but for 200mm dia.
Same as Item no 10.1 but for 250mm dia.
Same as Item no 10.1 but for 300mm dia.
Same as Item no 10.1 but for 450mm dia.
Dismantling the following size pipe line including dismantling of the fittings. 15mm dia.
Same as item No 11.1 but for 20mm dia.
Same as item No 11.1 but for 25mm dia.
Same as item No 11.1 but for 40mm dia.
Same as item No 11.1 but for50mm dia.
Same as item No 11.1 but for 65mm dia.
Same as item No 11.1 but for 80mm dia.
Same as item No 11.1 but for100mm dia.
Cutting GI. Pipeline of following dia. At two points and placing the special such as socket, bend etc. 80mm dia.
Same as item No. 12.1 but for 100mm dia.
Same as item No. 12.1 but for 150mm dia.
Same as item No. 12.1 but for 200mm dia.
Same as item No. 12.1 but for 250mm dia.
Cleaning of chocked pipe lines including its dismantling and relaying the same after proper cleaning with all labour and T&P etc. 15mm dia.
Same as item no. 13.1 but for 20mm dia.
Same as item no. 13.1 but for 25mm dia.
Same as item no. 13.1 but for 40mm dia.
Same as item no. 13.1 but for 50mm dia.
Same as item no. 13.1 but for 65mm dia.
Same as item no. 13.1 but for 80mm dia.
Cleaning of chocked pipe lines, plumbing arrangement of residential quarter 15/20/25mm dia. Pipe line cleaning and fixing the same in proper position.
Fixing of brass Bibcock or Stopcock including fixing of GI. Pipe pieces as required.15 mm
Modification of existing water connection for from ground floor and first floor quarter and two quarter of ground floor shall be connected with one point and two quarters of first floor shall be connected with other point including fixing laying and jointing pipeline (one job means providing connection in one house.
Repairing of leaking lead joints of following size in GI./ CI. Pipeline including cutting the road, excavation up to average depth of 1.0m to expose off pipeline and taking out old lead and providing lead in joints.80mm dia.
Same as item no. 17.1 but for 100mm dia.
Same as item no. 17.1 but for 150mm dia.
Same as item no. 17.1 but for 200mm dia.
Same as item no. 17.1 but for 250mm dia.
Same as item no. 17.1 but for 300mm dia.
Same as item no. 17.1 but for 450mm dia.
proving & fixing of TEE in existing pipe line of following dia. Including cutting ,taking out the Pipeline making thread &relaying of special like nipple, bend socket etc. 40mm dia.
Same as item no. 18.1 but for 50mm dia.
Same as item no. 18.1 but for 65mm dia.
Cleaning of terrace/loft water storage tank (inside surface area) 500 litre capacity at all heights with coconut brushes, duster etc., removal of silt, rubbish from the tank and cleaning the tank with fresh water disinfecting with bleaching powder @ 0.5gm per litre capacity of tank, including marking the date of cleaning on the side of tank body with the help of stencil and paint and disposing of malba, all complete as per direction of Engineer-in-Charge. (The old date already written on tank should be removed with paint remover or black paint and if date is not written with the stencil or old date is not removed deduction will be made @ Rs. 0.10 per litre if during cleaning any GI fittings or ball cock is damaged that is to be repaired by contractor at his own cost and nothing extra will be paid on this account)
Removing leakage of MS./GI. Pipeline of following dia. Pipe, by way of cutting & welding of joints including all arrangements for welding including all material, labour T&Petc.(welding M/C, electrods, gas cutter, DA./Oxygen gas etc.shall be arrange by the contractor at his own cost.) 80mm dia.
Same as item no. 20.1 but for 100mm dia.
Same as item no. 20.1 but for 150mm dia.
Same as item no. 20.1 but for 250mm dia.
Same as item no. 20.1 but for 300mm dia.
Same as item no. 20.1 but for 450mm dia.
Random rubble masonry with hard stone in foundation and plinth including levelling up with cement concrete 1:6:12 (1 cement : 6 coarse sand : 12 graded stone aggregate 20 mm nominal size) upto plinth level with :
Clearing jungle including uprooting of rank vegetation, grass, brush wood, trees and saplings of girth up to 30 cm measured at a height of 1 m above ground level and removal of rubbish up to a distance of 50 m outside the periphery of the area cleared.
Supply and laying of following size GI. (medium quality) pipe including all types of fitting such as TEE, socket, bend, elbow, elbow reducer nipple etc. but excluding union and including all material, labour T&P etc. 15mm dia.
same as item no 23.1 but for 20mm dia.
same as item no 23.1 but for 25mm dia.
same as item no 23.1 but for 40mm dia.
same as item no 23.1 but for 50mm dia.
same as item no 23.1 but for 100mm dia.
Laying of following size GI. pipe including all types of fitting such as TEE, socket, bend, elbow, reducer, nipple, union etc. for completion of pipe line including all labour ,T&P etc. Pipe will be issued departmentally on free of cost. 15mm dia.
Same as item no. 24.1 but for 20mm dia.
Same as item no. 24.1 but for 25mm dia.
Same as item no. 24.1 but for 40mm dia.
Same as item no. 24.1 but for 50mm dia.
Same as item no. 24.1 but for 80mm dia.
Supply and fixing of following size GI. union and including all material, labour T&P etc. 15 mm nominal bore
Same as item no. 25.1 but for 20 mm nominal bore
Same as item no. 24.1 but for 25 mm nominal bore
Same as item no. 24.1 but for 40 mm nominal bore
Same as item no. 24.1 but for 50 mm nominal bore
Excavation in hard rock cutting for repairing pipeline including cost of all labour,T&P, etc. required for proper completion of the work.
Structural steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position like making flange, welding of equipment at site and applying a priming coat of approved steel primer all complete
Supply & fixing of C.P. lift cock of 125gm 15mm dia. Pipe including its welding with pipe/ socket with all material, labour T&P etc. required for completion of work.
Providing casual labour to attend Water distribution& during summer season with cost all labour, T&P etc. complete .The work shall be done as per direction of engineer in charge.
Making announcement regarding the water supply in all the sector of Obra colony so as to communicate the residents of colony regarding the problem/information about water supply with cost of T&P, complete.
Welding by gas or electric plant including transportation of plant at site etc. complete.
Providing & fixing gun metal gate valve with CI. Wheel of approved quality (screwed end). 15mm Nominal bore.
Same as item no. 32.1 but for 20mm Nominal bore.
Same as item no. 32.1 but for 25mm Nominal bore.
Same as item no. 32.1 but for 40mm Nominal bore.
Providing & fixing ball valve (brass) of approved quality, high or low pressure with plastic float complete. 15mm Nominal bore.
same as item no 33.1 but for 20mm Nominal bore.
Providing and fixing Polyethelene-Aluminium- Polyethelene (PE-AL-PE) Composite Pressure Pipes conforming to IS - 15450, U.V. stabilized with carbon black having thermal stability for hot & cold water supply, capable to withstand temperature up to 80°C, including all special fittings of composite material (engineering plastic blend and brass inserts wherever required) e.g. elbows, tees, reducers, couplers & connectors etc., with trenching, refilling and testing of joints complete as per direction of the engineer in charge.1216 (16 mm OD) pipe
Same as 34.1 but for 1620 ( 20 mm OD) pipe
Same as 34.1 but for 2025 ( 25 mm OD) pipe
Same as 34.1 but for 4050 ( 50 mm OD) pipe
Supply and fixing of brass bib cock or stop cock 15mm Ø wt. not less than 280 gm. Including fixing of G.I. pipe pieces as required .
Same as above 35.1 but for PVC / Plastic bib cock of approved quality.
Supply and fixing of cast iron turn cock 15mm Ø wt. not less than 150gm.
Same as item no. 5 .1 but only for fixing of bib cock / turn cock.
Overhauling the not working cistern including changing and adjustment of the parts.
Replacing of damaged rubber washer of bib cock / stop cock including cost of all material labour and T&P etc. for completion of the work.
Supply and fixing of G.I. bend of 15mm dia wt. not less than 103 gm.
.Same as item no.39.1 but for 20 mm dia wt . not less than 176 gm.
Supply and fixing of G.I. reducer of size 20 x 15 mm wt. not less than 102 gm.
Supply and fixing of G.I. plug 15 mm dia wt. not less than 20 gm.
Same as item no. 41.1 but for 20 mm dia wt. not less than 25gm
Supply and fixing of G.I. Nipple15x75 mm dia wt. not less than 75 gm.
Same as item no. 42 .1 but for 15x100 mm dia wt. not less than 110 gm.
Same as item no. 42.1 but for 15x125 mm dia wt. not less than 135gm.
Same as item no. 42.1 but for 20x80 mm dia wt. not less than 210gm.
Lettering with black Japan paint of approved brand and manufacture including cost of all material , labour ,T&P etc. required for proper completion of work.
Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes,having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge.15 mm nominal outer dia Pipes.
Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes,having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge.20 mm nominal outer dia Pipes.
Potable water Distribution in obra colony door to door by tractor driven water tanker as per requirement during major fault/breakdown in filtration plants.
Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in foundation and plinth in:Cement mortar 1:6 (1 cement : 6 coarse sand)
Running operation of following as per below- (a) water treatment plant of 25 lac gallon per day capacity situated in sector no. 10 including dosing tank and bleaching powder (dosing of chemicals shall be fixed by. Deptt. Depending upon the raw water quality) including transportatoin of chemical from store shed located near W.T.P. Area to dosing point including beck wasing. The filters once or twice in a day will be backwashed, operation of sluice valve of plant and other required arrangement for smooth running of plant including watch and ward and supervision work of the plant. (ii) 150 H.P. Pumping sets installed in pump house on the bank of Obra lack near Railway bridge, one or two pump shall be operated as per requiremsent including watch and ward of the pump house including all other arrangement for smooth running of pumps
(a) sweeping Cleanning, and removing undisered plant in the area of entire W.T.P. and lack area, pump house including all the drains, cleaning the plant and pump house equipment removing dust and disposal of garbage and waste material including all other cleaning works as and when requied for keeping the plant and pump house neat and clean.(minimum 1 No Labour shall be engaged) (b) Patrolling along main feeding pipe line from Obra lake pump house to filtration plant sec no. 10 including cleaning of buses grass etc. I meter both sides along pipeline reporting to J.E./A.E. About any type of leakage/ damaged to the pipeline, keeping proper watch and ward of feeding pipeline with cost of all labour, T&P etc. required for proper completion of work(mininmum 1 No labour shall be engaged)
Overhauling of the follwing size sluice valve after opening including greasing and changing the M.S. Spindle eith C.I. nut & Bolts, Neoprene rubber packing etc. including cost of all material, labour T&P etc. complete ( for 100 mm dia)
Overhauling of the follwing size sluice valve after opening including greasing and changing the M.S. Spindle eith C.I. nut & Bolts, Neoprene rubber packing etc. including cost of all material, labour T&P etc. complete (for 150 mm dia)
Overhauling of the follwing size sluice valve after opening including greasing and changing the M.S. Spindle eith C.I. nut & Bolts, Neoprene rubber packing etc. including cost of all material, labour T&P etc. complete (for 250 mm dia)
Overhauling of the follwing size sluice valve after opening including greasing and changing the M.S. Spindle eith C.I. nut & Bolts, Neoprene rubber packing etc. including cost of all material, labour T&P etc. complete (for 300 mm dia)
Overhauling of the follwing size sluice valve after opening including greasing and changing the M.S. Spindle eith C.I. nut & Bolts, Neoprene rubber packing etc. including cost of all material, labour T&P etc. complete (for 450 mm dia)
Overhauling of the follwing size sluice valve after opening including greasing and changing the Nut & bolts Neoprene rubber cost of all material, labour T&P etc. complete for the proper completion of the work. (for 100 mm dia)
Overhauling of the follwing size sluice valve after opening including greasing and changing the Nut & bolts Neoprene rubber cost of all material, labour T&P etc. complete for the proper completion of the work. For 150 mm dia
Overhauling of the follwing size sluice valve after opening including greasing and changing the Nut & bolts Neoprene rubber cost of all material, labour T&P etc. complete for the proper completion of the work. For 250 mm dia
Overhauling of the follwing size sluice valve after opening including greasing and changing the Nut & bolts Neoprene rubber cost of all material, labour T&P etc. complete for the proper completion of the work. For 300 mm dia
Overhauling of the follwing size sluice valve after opening including greasing and changing the Nut & bolts Neoprene rubber cost of all material, labour T&P etc. complete for the proper completion of the work. For 450 mm dia
Supply and fixing of copper lungs of 400 Amp. In cable incluing all materials i.e. soldering stick, flux cotton blck and P.V.C. tape etc. labour and T&P etc. required for the proper completion of work
Overhauling of 150 H.P. Starter including opening the system. Cleaning sand papring required part replacing any damaged part, all labour, T&P etc. (the new parts of replacing any damage part will be issued free cost.)
Overhauling of 60 H.P. Starter including opening parts replacing any damaged part replacing any damaged part , all labour, T&P etc. ( The new part will be issued free of cost)
Repairing of reflux valve (NRV) dia fitted with pipe in river including taking out for repairing its and making the gate water tight changing the packing, nuts & bolts, ressembling the valve and lowering the system in river including cost of all material, labour and T&P complete required for proper completion of work.
Overhauling , greasing , oiling the chain and gears of floucculator and re- fixing the chain after repairing cost of all material labour T&P etc, requierd for the proper completion of work.
Supply and fixing C.I. block ib 50 mm dia dhaft of floculator Mechanism for bearing no. 6211-K including cost of all material , labour T&P etc. required for prof copper lungs of 400 Amp. In cable incluing all materials proper completion of work.
Opening the gear box of floculator mechanism taking out damaged parts and re-assembling the same after fabricating any of the following part incorrect alignment including cost of all material, labour T&P etc. required for proper completion of work.
M.S. Worm shaft gear
250 mm dia M.S. gear as per sample
Replacing of 6206 SKF bearing in gear box
Replacing of GM Bush over worn shaft with oil seal.
G.M. gear ring on gear
Taking out the broken pedestal repairing the same by welding new clamps and bots & nuts and re-fixing the same after fabricating any of the following part incorrect alignment including cost of all material, labour , T&P etc. required for proper completion of work
Overhauling of 150 H.P. pump including, greasing the part , bearing etc. and repairing and changing the defective parts if required and repairing of bearing housing/shaft by welding, turning etc. changing the gland packing nut, bolts including cost of all materials , labours T&P etc. complete (bearing will be issue free cost by the department.)
Overhauling of 60 H.P. pump including, greasing the part , bearing etc. and repairing and changing the defective parts if required and repairing of bearing housing/shaft by welding, turning etc. cchanging the gland packing nut, bolts including cost of all materials , labours T&P etc. complete (bearing will be issue free cost by the department)
Replacing the 150H.P. Motor in case of defect by the other motor available at site filetration plant sec mo. 03/Electrical workshop in power house as per instruction taking out the defective motor for rewinding and fixing other motor on its place with proper alignment and fitting including cartage of both motors by department tractor trolley including cost of labour, T&P etc. required for proper completion of work.
Replacing the 60 H.P. Motor in case of defect by the other motor available at site filetration plant sec mo. 03/Electrical workshop in power house as per instruction taking out the defective motor for rewinding and fixing other motor on its place with proper alignment and fitting including cartage of both motors by department tractor trolley including cost of labour, T&P etc. required for proper completion of work.
Repairing of the leakage of 450 mm dia M.S. pipe line by welding etc. including draining the pipe , earth excation and frfilling the same including all material, labour. T&P etc. required for proper completion of work
Opening the bearing housing of floculator and changing the bearing no. 6211-K socket and water seal etc. reassembling of the complete required for proper completion of work.
Fabrication and fixing of 50mm dua M.S. Shaft (Approx) 5 mtr. Long in flouculator including cutting slots farkey etc. and mashining the same proper algnment, fixing the G.M. Bush with CI housing on M.S. Shaft including taking out the damaged shaked including cost of all matarial, labour T&P etc. required for proper completion of work
Supply and fixing G.M. bush with rubber in 50mm dia shaft in R.C.C. wall flocultar inlcuding all materials T&P etc. required for the proper completion of work
Replacing defective bearing/coupling etc. greasing alingment the 150H.P. Motor including cost of grese , bolts, nuts labour , T&P etc. Complete (bearing/coupling will be free of cost, if necessary)
Replacing defective bearing/coupling etc. greasing alingment the 60H.P. Motor in case of defected by the other spare motor available at site filetration plant sec mo. 03/Electrical workshop in power house taking out the defective motor for rewinding fixing other motor in its place with proper alignment and fitting including carriage of both motors by department tractor trolley including cost of labour, T&P etc. required for the proper completion of work.
Clearing jungle including uprooting of rank vegetation, grass, brush wood, trees and saplings of girth up to 30 cm measured at a height of 1 m above ground level and removal of rubbish up to a distance of 50 m outside the periphery of the area cleared.
Providing casual labour to attend Water distribution& during summer season with cost all labour, T&P etc.complete .The work shall be done as per direction of engineer in charge.
Opening & Closing of valves of following overhead/hilock situated water tanks of obra colony at supply time as per schedule (two/three times in a day as needed) after complete filling of tank. Keeping proper watch during supply hours , supervision as per direction of engineer in charge including providing of T&P e.g. Torch,gloves,raincoat and Valve opening wrench etc complete. (i)water tank no -1,2,3& 4 situated at hillock of sector-3 (ii) water tank no -5 and backwash tank situated on hillock near filtration plant sector-3. (iii)Water tank no -11 situated at hillock of sector-2 (iv)Water overhead tank no-12 situated in sector -8 (v) Water overhead tank no-13&14 situated in sector -9. (vi)-Water tank no-8,9 & 10 situated at hillock near Obra Inter College
Desilting and cleaning of walls and floors including removing mud properly of following places of filtration plant sector-3 with labour,T&P and disposal of waste materal outside boundrywall of plant as below. (i) 2 Nos. flocculator tank with aerator and its channels upto flocculator and tube settler zone including cleaning mud from A.C. Tube 660 Nos. in each zone, (ii)Round flocculator and connecting channels from flocculator to filter, radial channels and its holes. (iii)under ground reservoir 0.5 lakh Gallons capacity
Desilting and cleaning of the water Tank No. 1,2,3,4,5,8,9,10,11 and back wash tank each of about 1.0 lakh Gallon capacity including scraping of walls, floor and disposal of waste mud etc, out side of tank area including labour, T&P etc. with lead and lift. The tank are situated over the top of hills. (Rate is for each tank)
Desilting and cleaning of the water overhead Tank No. 12,13 and tank No 14 situated at sector N0. 8 and 9 including scraping of walls and floors and its disposal of sludge, mud etc. outside tank area including cost of all labour,T&P etc, required for proper completion of work.(rate is for each tank)
Sweeping and cleaning daily of the Filtration plant sector No.3 and jharia nala pump house including pump area, ground floor, first floor entire store including roads etc...removal of dust and webs from electrical switches starters, motors, wall of pump house including cleaning of waste material alum, lime, bleaching powder, functioning systems for keeping the complete plant area neat and clean including disposal of waste material and garbage with the help of trolley/ Truck up to lead of 1 km. including all labour T&P etc. required for proper completion of work.(minimum two labour shall be engaged daily) including cost of material labour T&P etc.
Beldar for misc. work as per direction of Engineer in charge.
Operator for operating the machine as per direction of Engineer in charge.
Technician for attending the fault of machine as per direction of Engineer in charge.
Provinding services for Welding and machining of spindle and support of 4"- 10" gate valves.
Provinding services for reparing and machining of body ( hole for spindle base) of 4"- 10" gate valves installed.
Providing & fitting of foundation bolt of 60 /150 H.P. pump
supply & fitting body stud of 60/150 H.P. pump
Provinding services for reparing of 50/60/150 H.P. bearing housing by welding & machining of bearing portion complete.
Provinding services for reparing of rotor 50/60/150 H.P. bearing general portion housing complete.
Provinding services for dismantaling & Fixing of cold/ sized bearing housing rotor of 50/60/150 H.P. motor
Provinding services for dismantaling & Fitting of complete rotating unit of 150 H.P. DSM 6 Pump and its balancing.
Provinding services for fabrication and machining of coupling bolt, nut and bush.
Provinding services for repairing of shaft bearing general portion by welding and machining of 60/150 H.P. DSM 6pump installed at filtration plant.
Provinding services for repairing of 150 H.P. Motor bearing general portion by welding and machining of bearing portion
Providing and fitting of SS sleeve of 60 H.P. pump.
Provinding services for fabrication, Machining and Fixing of coupling set of 60 H.P. pump moter side.
Fogging outdoor by specified chemical and diesel in project colony area (sector No. 1, 2, 3, 4, 8, 9 & 10) on entire Nigam’s land as directed by Engineer in Charge or his representative including cost of all materials, labours, T&P etc. required for proper completion of work. (7 Sectors X 8 Times)
Anti Larva Treatment by spreading specified chemicals and diesel oil at all stagnant water body in sector No. 1, 2, 3, 4, 8, 9 & 10 colony area, Temporary Colony nearby 1 Km as per schedule or as directed by Engineer in charge or his representative. (7 Sectors X 8 Times)
Running, operation, cleaning of eqipments,oiling/greasing, sampling & testing, TPI, housekeeping, cleaning and washing of apparatus involved (As per attached scope of work) of sewage treatment plant of capacity 3000m3 (av) per day
Supplying and applying of following required consumables chemicals for testing of sewage at different location treated effluent per day at STP as per parameters of UP pollution Control Board such as PH, BOD, COD, TSS, MLSS etc. The chemical should be purchased from standard traders and should be approved by the Engineer In charge(Measurement shall be done on consumption basis)
KH2PO4 containing 500 G bottle
K2HPO4 containing 500 G bottle
NH4Cl containing 500 G bottle
MgSO4 7H2O Exceed 500 gm packed
CaCl2 500gm. packed
FeCL36H2O 500gm. packed
MnSO4 4H2O 500 gm packed
NaOH 500 gm packed
KI 500 gm packed
NaN3(Sodium acid) 100 gm packed
Na2S2O3 5H2O 500gm packed exclor.
Lab graded solouble starch 500 gm packed
dry K2Cr2O7 500gm exclor packed
H2SO4 conc. 500 ml packed
AgSO4 25 gm packed
Fe(NH4 SO4 6H2O 500 gm packed
PH tablet 4,7,9N
Ferrion indicator solution 100ml
AgSO4 crystals 250gm packed
Universal indicator
Filter paper (TSS) 4Nos. 11cms dia
Filter Paper (M.L.S.S.)
Sulpuric acid 100 gm packed
Sodium Sulphate 500gm packed
Providing and mixing of Sodium Hypo-Chlorite (NaOCl) to the required concentration (10-12 %) or as per the direction of Engineer in charge
Rewinding of following capacity burnt electrical induction motors of 220V/440Volt, single/three phase including dismantling of motors ,brush wire cleaning, brushing, drying and providing same gauge super enamel copper wire of standard make along with testing and commissioning and same positioning of motor including of all labours materials and T&P etc. required for proper completion of work.
Motor up to 1.0KW for IPS screen,decanter
Motor above 1.0KW up to 05 KW
Motor above 05KW up to 10KW
Motor above 10KW up to 30 KW
Providing & fixing following new SKF, TATA, NBC make bearing of replacement of damaged /defective bearing including oiling & greasing of motor or pump damage or defective bearing shall be property of the contractor.
For electric motor 1.0HP capacity, 1400 RPM
DE and NDE bearing NO. 6204Z or equivlent
DE and NDE bearing NO. 6205 or equivlent
For Aqua make electric motor 10HP capacity, 1400RPM, DE and bearing No.
DE and NDE bearing No.6308Z/C3 or equivlent
DE and NDE bearing No.63072/C3 or equivlent
Aqua make electric motor 20HP capacity 1400 RPM DD,NDE bearing no. 6309 or equivlent
Aqua make electric motor 5 HP,2830 RPM DE & NDE bearing No. 6306 or equivlent
Aqua make 22.5 HP electric motor bearing No.6310 or equivlent
Aqua make 25HP electric motor bearing No.7215 or equivlent
Kirloskar make 15HP electric motor bearing No.7020-B or equivlent
Crompton greaves make 45 HP electric motor bearing
Periodical cleaning of sump by dewatering it by diesel/electric pump set including out of night soil from sump and disposal of it a specified place at ground level beyond 500M. distance including cost of all material labour & T&P required for proper completion of work. Approximate 20M3 dry sludge shall be disposal for one job in case of less quantity proportionate payment shall be made.
Periodical cleaning of SBR Tank and CCT tankof size approx 800 M2 area and surrounding by dewatering by pump set including jungle and grass cutting & also including taken out sludge earth, debris, brick stone ballast etc. and other material and disposal of the same at a specified place at ground level beyond 500 M. distance including cost of all material labour & T&P required for proper completion of work. Approximate 50 M3 sludge /debris shall be disposed for one job in case of less quantity proportionate payment shall be made.
Servicing and maintenance of sluice valve as and when required the change of damaged spindle replacement of rubber gasket, nuts and bolts, checkout etc, including greasing and refixing including cost of all labour and T&P etc.
80mm to 100mm dia
150mm to 250mm dia
Making 75 mm long thread in 100mm to 400mm dia D.I. pipe for fixing of flange by lathe machine including dismantling from pipe line and decommissioning in pipe line complete.
Repair of small size gear box lying in decanter including replacement of rubber wheel
Providing & fixing of approved make or replacement of damaged/defective spares including oiling, greasing etc. complete.
V-belt A-25 Hindon or approved make
V-belt PIX-Xset SPB 1700 or approved make
Coupling set L-110 UNIMAC or approved make
Coupling set L-225 UNIMAC or approved make
Gate valve spindle brass size ‘8’ to’8’ Upadhaya or approved make
MCB switch DTH-200,VI-600 for main control panels L&T or approved make
Relay of starter 1HP capacity L&T or approved make
Relay of starter 5HP capacity L&T or approved make
Relay of starter 10HP capacity L&T or approved make
Relay of starter 15HP capacity L&T or approved make
Relay of starter 25HP capacity L&T or approved make
Relay of starter 20-33 A capacity L&T or approved make for Blower
Rubber oil seal for gear box
Fuse cell with cut out 415V/63amp
Amp. meter for 25HP motor
N.R.V. shaft 10” to 12” size
Bush for secondary sludge pump (SP-4L)
Bush for secondary sludge pump (SP-3L)
Bush for 25HP pump sludge pump (SPL-SH)
Impellor (SP-4L)
Impellor (SP-3L)
M.S.chain250x85cm
Supply of decorative annual plants such as English rose, croton, caladium etc.
Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade one or more coats on old work.
White washing with lime to give an even shade for old work (two or more coats).
Distempering with 1st quality acrylic distember (Ready mix) having VOC content less than 50 grams/ litre of approved brand and manufacture to give an even shade old work (one or more coats).
Finishing wall with water proofing cement paint of required shade for old work (one or more coat applied @ 2.20 kg/10 qmt.)over priming coat of primer applied @ of 0.80 Litters/10sqm applied in cludiing coast of priming coat.
Earth work in excavation for all kinds of soil over areas (exceeding 30cm in depth. 1.5m in width as well as 10 sqm on plan) including disposal of excavated earth, lead upto 50m and lift upto 1.5m; disposed earth to be levelled and neatly dressed
Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20cm in depth: consolidating each deposited layer by ramming .
Providing and laying in position cement concrete of specified grade (1 Cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size) excluding the cost of centring and shuttering all work upto plinth level
Brick work with Cement mortar 1:4 (1 cement : 4 course sand) F.P.S. bricks of class designation 75 in foundation and plinth.
12 mm cement plaster of mix 1:6 (1 cement : 6 fine sand).
Clearing grass and removal of the rubbish up to a distance of 50 m outside the periphery of the area cleared.
Supply & stacking compost/cow dung/sludge manure at site including cartage up to 02 Km (manure measured in stack will be reduced by 8% for payment).
Brick edging with F.P.S. bricks of class designation 75 in full brick width and half brick depth including excavation, refilling and disposal of surplus earth lead upto 50 meters.
Brick edging with F.P.S. bricks of class designation 75 in laid lengthwise with and half brick depth including excavation, refilling and disposal of surplus earth lead upto 50 meters.
Running operation of 11 Nos. RO plant situated at different location in Obra town which includes operation of gate valve, tube well RO system, cleaning of tanks at interval of 7 days with bleaching powder, cleaning of room, RO plant, Tap point area, back wash of RO system at regular interval along with watch and ward of entire plant and ensure to provide safe drinking water to all the consumers.
Overhauling of the submerciable pump with all winding with copper wire along with proper sealing of pump, complete with taking out from well and refix in position along with all T&P material, Labour etc. complete for system.
Maintenance of any electrical fault at RO with all labour, T&P etc. required for proper completion of work. (Consumable shall be issued by the department free of cost).
Maintenance of any water supply along with repair of gate valve, water tap and discharge pipe from RO plant with all T&P and labour etc. complete for proper completion of work.(Consumable shall be issued by the department free of cost).
Suplly and fixing of new electrical fittings part for starter of 1 HP pump with all T&P, material and labour etc. complete as per direction of Engiineer in charge. :Contactor 30-40 Amp
Suplly and fixing of new electrical fittings part for starter of 1 HP pump with all T&P, material and labour etc. complete as per direction of Engiineer in charge.:Condenser 50 mfd
Suplly and fixing of new electrical fittings part for starter of 1 HP pump with all T&P, material and labour etc. complete as per direction of Engiineer in charge.:Starting condenser
Suplly and fixing of new electrical fittings part for starter of 1 HP pump with all T&P, material and labour etc. complete as per direction of Engiineer in charge.:Push Botton
Suplly and fixing of new electrical fittings part for starter of 1 HP pump with all T&P, material and labour etc. complete as per direction of Engiineer in charge.:Indicating lamp
Suplly and fixing of new electrical fittings part for starter of 1 HP pump with all T&P, material and labour etc. complete as per direction of Engiineer in charge.:Volt meter
Suplly and fixing of new electrical fittings part for starter of 1 HP pump with all T&P, material and labour etc. complete as per direction of Engiineer in charge.:Amp. Meter
Suplly and fixing of new electrical fittings part for starter of 1 HP pump with all T&P, material and labour etc. complete as per direction of Engiineer in charge. :Overload Relay
Suplly and fixing of new electrical fittings part for starter of 1 HP pump with all T&P, material and labour etc. complete as per direction of Engiineer in charge.:MCB
Providing and fixing PTMT, push cock of approved quality and colour. 15 mm nominal bore, 80mm long, weinghing not less than 46 gms.
Providing and fixing chlorinated polyvinyl chloride (CPVC) pipes, having thermal stability for hot and cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with claimps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in charge. Internal work- Exposed on wall 25 mm nominal outer dia pipes.
Demolishing cement concrete manually/ by mechanical means including disposal of material within 50 metres lead as per direction of Engineer - in - charge.Nominal concrete 1:3:6 or richer mix (i/c equivalent design mix).
Dismantling old plaster or skirting raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 metres lead.
Removing white or colour wash by scrapping and sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete.
Finishing walls with water proofing cement paint of required shade : applied @ 3.84 kg/10 sqm)
Lettering with black Japan paint of approved brand and manufacture
Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade : Two or more coats on new work over an under coat of suitable shade with ordinary paint of pproved brand and manufacture.
Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade : New work (two or more coats) over and including water thinnable priming coat with cement primer.
Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level :1:2:4 (1 cement : 2 coarse sand (zone-III) : 4 graded stone aggregate 20 mm nominal size).
Annual Maintenance of 11 Nos. R.O.s of 1000 LPH capicity.(Details scope of work (4 visits in one year with the gap of 03 months in between the visit of each R.O. i.e. total nos of visit equal to 11X4= Total 44 Job)
Deplyoment of 01 Nos. Project Co-ordinator
Deplyoment of 12 Nos. Unskilled Manpower
Operation and Management of Collected MSW at site icluding segregation, spreading, sprinkling bacteria culture, and collecting manure in plastic bags all inclusive of T&P/ chemicals required for proper operation as per direction of Engiineer in charge.
Transportation of manure/ sludge /waste materials from OTPS Obra to Dala Cement Factory.(5km+5km beyond)
Suplly and stallation of incineration Heater Power :3KVA single/ Three Phase capacity:10-25 kg/Hour
Deplyoment of 01 Nos. Project Co-ordinator_ETP operation
Deplyoment of 02 Nos. Unskilled Manpower_ETP operation
Supply and fixing of PVC pipe having 110mm outer dia and 100 mm inner dia ISI mark good to resist a pressure of 6 Kg./sq. cm including fixing of new or old end bend clamps nails if required and issued by department.
Supply and fixing of PVC pipe having 160mm outer dia and 150mm inner dia ISI mark good to resist a pressure of 6 Kg./sq. cm including fixing of new or old end bend clamps nails if required and issued by department.
Providing and fixing white vitreous china water closet squatting pan (Indian type) : Long pattern W.C. pan of size 580 mm
Dismantling of leaky W.C pan with foot rest including its all fittings and re-fixing the serviceable W.C.pan (New W.C.pan shall be issued by the department free of cost) in proper position including provision of lead, lock joint, and also repairing of damaged plaster of wall & relaying C.C. 1:2:4 floor with base concrete including cost of all materials, labour, T&P etc. required for proper completion of work.
Providing and fixing white vitreous china pedestal type water closet (European type W .C. pan) with seat and lid, 10 litre low level white P .V .C. flushing cistern, including flush pipe, with manually controlled device (handle lever), conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required W.C. pan with ISI marked white solid plastic seat and lid.
Providing and fixing G .I. inlet connection for flush pipe connecting with W.C. pan.
Providing and fixing 15mm nominal bore C.P . brass angle valve for basin mixer and geyser points of approved quality conforming to IS:893.
Providing and fixing on wall face unplasticised Rigid Single socketed PVC rain water pipes/gas pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion:75 mm diameter.
Providing and fixing on wall face unplasticised Rigid Single socketed PVC rain water pipes/gas pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion:110 mm diameter.
Providing and fixing on wall face unplasticised - PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion:Single tee with door 75x75x75 mm.
Providing and fixing on wall face unplasticised - PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion:Single tee with door 110x110x110 mm.
Providing and fixing on wall face unplasticised - PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion:Single tee without door 75x75x75 mm.
Providing and fixing on wall face unplasticised - PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion:Single tee without door 110x110x110 mm.
Providing and fixing on wall face unplasticised - PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion:Bend 87.5° 110 mm bend.
Providing and fixing 100 mm S.W. P trap/intercepting trap with stiff mixture of cement mortar 1:1 (1 cement : 1 fine sand) including testing of joints etc. complete.
Providing and fixing a pair of white vitreous china foot rests of standard pattern size 250X125X25 mm for squatting pan water closet.
Providing and fixing white vitreous china pedestal type (European type/ wash down type) water closet pan including zet, lid, half turn/u turn valve etc. including cost of all materials, labour, T&P etc. required for proper completion of work.
Providing and fixing 8 mm dia C.P . / S.S. Jet with flexible tube upto 1 metre long with S.S. triangular plate to Eureopean type W .C. of quality and make as approved by Engineer - in -charge.
Providing and fixing solid plastic seat with lid for pedestal type W.C. pan complete.
Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink without drain board of size 610x460 mm bowl depth 200 mm as per IS: 13983 with C.I. brackets and stainless steel plug 40 mm, including all fittings such as waste jali, waste pipe etc. cutting and making good the walls wherever required.
Providing and fixing flexible 32 mm dia P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete.
Providing and fixing white vitreous china flat back wash basin of size 550x400 mm including making all connections but excluding the cost of fittings.
Providing and fixing 15 mm nominal bore, 125 mm long foam flow, weighing not less than 120 gms PTMT pillar cock of approved quality and colour.
Providing and fixing 10 litre capacity - White P.V.C. low level flushing cistern with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete.
Providing and fixing 15mm nominal bore, 165 mm long, weighing not less than 110 gms PTMT bib cock of approved quality and colour.
Providing and fixing 15 mm nominal bore, 86 mm long, weighing not less than 88 gms PTMT stop cock of approved quality and colour.
Providing and fixing 15 mm nominal bore, 98 mm long, weighing not less than 75 gms PTMT push cock of approved quality and colour.
Providing and fixing 15 mm nominal bore with 30cm length unplasticised P.V.C. connection pipe with PTMT Nuts, collar and bush of approved quality and colour.
Providing and fixing PTMT swivelling shower, 15 mm nominal bore, weighing not less than 40 gms.
Providing and fixing on wall face 110 mm dia unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion, (i) Single socketed pipes.
Replacement of Nylon/leather washer in bib cock, stop cock, wheel value, pillar cock etc. of all sizes including opening and re-fixing with jute packing complete job.
Providing and fixing the following size G.I. fittings of approved quality after taking out old & damaged fittings if required including suppl of all materials, Labour T&P etc.
E. Bend 15mm to 25mm dia.
F. Bend 40mm to 50mm dia.
G. Plug 15mm to 25mm dia.
H. Plug 40 mm to 50 mm dia
I. Nipple 15mm to 25mm dia.
J. Nipple 40 mm to 50 mm dia
M. Reducer up to 50mm.
Taking out damaged w.c. seat from lavator at different elevations including clipping the cement concrete an the side of seat with chisel and disposal of the debris in dust bin including all labour, T&P etc required.
Providing & fixing 32 mm dia G.I. Telescopic flush pipe of 18 gauge with brass coupling including supply of all materials, labour, T&P etc. required.
Supply & fixing C.I. Chain with G.I. pull for C.I. flushing cistern including cost of all materials, labours, T&P etc required.
Providing & fixing the following size fittings for C.I. cistern with supply of materials, labours, T&P etc.
a. Float value of approved quality.
b. Brass chuck nut inside.
Providing & fixing C.I. bracket in walls for wash basin, cistern etc. including its grouting with C. conc 1:2:4 including cost of all materials, labour, T&P etc.
Providing & fixing white glazed earthen ware large size division plate of size 810X500mm (Hindustan Vitreous makes) including cutting of walls, making good the same after grouting bolts, supply of all materials labours, T&P etc required.
Providing & fixing 100mm dia floor trop of heavy quality with C.I. grating, cutting floor, grouting in C.C. 1:2:4 including supply of all material, labour, material, T&P etc. required.
Providing & fixing 100mm dia H.C.I. ‘P’ trap or ‘S’ trap of heavy quality including cost of all labour, material, T&P etc complete.
Taking out following sizes chocked H.C.I. pipes fixed with toilet along vertical wall on clamps & re-fixing the same properly with clamps after cleaning the chocked pipe including cost of all labour, material, T&P etc. (Damaged & unserviceable pipes shall be stacked in scrap yard in power house).
a. 100mm dia H.C.I. pipe
b. 150mm dia H.C.I. pipe
Providing & fixing H.C.I. pipe of following size with complete rose door bend etc. and other fittings including supply & fixing M.S. clamps, nut, bolts, cutting and making good the wall including supply of all material T&P etc complete.
a. H.C.I. pipe of 50mm dia
b. H.C.I. pipe of 100mm dia
c. H.C.I. pipe of 150mm dia
Attending the leakage in 100mm dia to 150mm dia G.I. pipe line including excavation of pit, fixing 400mm long M.S. collar of suitable dia mater in the damaged pipe line with load filling and testing the pipe line at full pressure, including supply of nut, bolts etc. refilling the pits with earth and level surface of the ground/road etc. complete job
Supply & fixing 15mm dia plastic bib cock including removing old/damaged bib cock if required.
Repairing and adjustment of flushing cistern for proper flushing cistern for proper functioning of the cistern.
Providing and fixing gun metal wheel value with C.I. wheel of approved quality (Screwed wnd)
a. 25mm Nominal bore
b. 40mm Nominal bore
c. 50mm Nominal bore
Providing and fixing PT/MT pillar cock of approved quality and colour-15mm Nominal bore, 125mm long bore foam flow, weighing not less then 120 gms.
Providing and fixing brass bib cock of approved quality following size-a. 15mm Nominal bore
Providing and fixing brass stop cock of approved quality.
a. 15mm Nominal bore
b. 20mm Nominal bore
Providing and fixing a pair of white vitreous china footrests of standard pattern for squatting pan water closet 250X130 X30mm
Providing and fixing P.V.C. low level flushing cistern with manually controlled device (Handle lever) confirming to IS 7231 with all fittings and fixtures complete (1041 Ltr. Capacity white)
Providing and fixing wash basin with C.I. Brackets, 15mm c.p. brass pillar taps, 32mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever required.White vitreous china flat back wash basin of size 550X440mm with single 15mm C.P. brass pillar tap.
Providing and fixing white vitreous china pedestal for wash basin completely recessed at the back for the reception of pipe and fitting.
Providing and fixing c.p. brass waste 32mm.
Providing and fixing P.V.C. waste pipe for sink of wash basin including P.V.C. waste fittings 32mm dia.
Providing and fixing plasticized PVC connection pipe with brass union 15mm nominal bore.
Providing and fixing white vitreous china laboratory sink with C.I. Bracket, C.P. brass chain with rubber plug 40mm c.p. brass waste and 40mm C.P. brass trap with necessary c.p. brass unions complete including painting of fittings and brackets, cutting and making good the wall wherever requireda. Size 600X450X200mm
Providing and fixing white vitreous china flat back or wall corner type lipped front urinal basin 439X260X350mm and 340X410X264mm sizes respectively.
Providing and fixing 600X450mm beveled edge mirror superior glass (of approved quality) complete with 6mm thick hard board ground fixed to wooden cleats with c.p. brass screws and washers complete.
Providing, laying and jointing glazed stone ware pipes grade ‘A’ with stiff mixture or cement, mortar in the proportion of 1:1 (1cement : 1 fine sand) including testing of joints etc. complete.
a. 100mm dia.
b. 150mm dia.
Dismantling of old SW pipes including breaking of joints and bed concrete stacking of useful materials near the site within 50m lead and disposal of unserviceable materials into municipal dumps/other dumping yards.
Providing and fixing G.I. pipe complete with G.I. fitting and damps, including cutting and making good the wall etc.
a. 15mm dia nominal bore
b. 20mm dia nominal bore
c. 25mm dia nominal bore
d. 40mm dia nominal bore
e. 50mm dia nominal bore
Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge.
25 mm nominal outer dia Pipes
Providing and fixing 15mm dia, 86mm long PTMT Bib cock of approved quality and colour weighing not less than 88gm. Including removing old/damaged bib cock if required.
Providing and fixing brass bib cock of approved quality size 15mm normal bore.
Supply & fixing 15mm dia plastic bib cock if required.
Providing and fixing PTMT bib cock of approved quality and colour. 15mm nominal bore, 86 mm long, weighing not less than 88 gm.
Providing and fixing brass stop cock of approved quality 15mm normal bore.
Providing and fixing brass stop cock of approved quality 20mm normal bore .
Providing and fixing G.I Socket 40mm to 50mm dia size approved quality after taking out old & damaged fittings if required including supply of all materials, labour, T&P etc.
Providing and fixing the following size G.I. fitting of approved quality after taking out old & damaged fittings if required including supply of all materials, labour, T&P etcf. Bend 40mm to 50mm dia.
Making connection of 15mm to 20mm dia from G.I./M.S. pipe and by means of cutting and making hole of required diameter providing ferrule including supply of all labour, material, T&P etc. complete.
Providing and fixing white vitreous china water closet of squatting pan (Indian type) Orissa pattern W.C. pan of size 580X440.
Providing and fixing a pair of white vitreous china foot rests of standard pattern for squatting pan water closet : 250X130X30mm
Providing & fixing c.p. brass waste 32mm for wash basin.
Providing & fixing P.V.C. connection pipe with brass union 15mm nominal bore.
Providing & fixing P.V.C waste pipe for sink of wash basin including P.V.C. waste fitting 32mm dia.
Providing and fixing 600x450 mm beveled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete.
Providing and fixing white vitreous china flat back or wall corner type lipped front urinal basin of 430x260x350 mm or 340x410x265 mm sizes respectively.
Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) :25 mm nominal bore
Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) :50 mm nominal bore
Providing and fixing 20mm dia 450mm long Aluminium towel of approved quality including all labour, material, T&P etc. required for proper completion of work.
Taking out damaged w.c. seal from lavatory at different elevation including clipping the cement concrete on the sides debris in dust bin including all labours, T&P etc. required.
Providing and fixing P.V.C. low level flushing cistern with manually controlled device (Handle level) confirming to IS 7231 with all fittings and fixture complete (1041 Ltr. Capacity white)
Cleaning of existing overhead tank partly filled with sand/silt etc. after taking shut down including cleaning the walls and base manually, disposal of silt, slush etc. in nearest dust bin or all other low lying as per direction of Engineer-in-charge, including supply of labour materials, T&P required for proper completion of work.
Providing and fixing 500mm W.C. seat of Hindustan/ Parry/ Nicer as approved by Engineer-in-charge including dismantling and removal of damaged w.c. seat including fixing new seat with P-trap properly including cost of all labour, materials, T&P etc.
Supply and fixing float-value with complete quality.:15mm dia
Cutting damaged P.V.C. pipe for removing leakages including S/T new P.V.C. pipe with socket including cost of all material, labour,T&P etc:15mm dia
Cutting damaged P.V.C. pipe for removing leakages including S/T new P.V.C. pipe with socket including cost of all material, labour,T&P etc: 20mm dia
Opening and cleaning of chocked bid cock and re fixing the same.
Removing chocking kitchen trap and bend C.I./A.C. down pipe including all labour, T&P etc.
Supply and fixing 50mm dia C.I. door bend
stage.html
html • 0.03 MB
tech_bid_open.pdf
cancelled_1.pdf
pdf • 0.38 MB
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 0.74 MB
edoc13.pdf
Tender Documents • 1.52 MB
BOQ_2044187.xls
BOQ • 0.56 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .