SPECIAL REPAIR TO BLDG NO. 98 OF SINGLE OFFRS ACCN UNDER GE (W) COLABA

M&L for carefully chipping and removing existing external plaster, up to 25 mm thick for all heights of building, using a low-impact, high-frequency hammer/chipper, without damaging the original sound brickwork or concrete, including raking out of joints, daily cleaning and stacking of debris, removal and disposal of debris from the site of work, complete in all respects, as specified and as directed. Note: For all the Height of Bldg.

M&L for carefully chipping and removing existing internal plaster, up to 12 to 15 mm thick, using a low-impact, high-frequency hammer/chipper, without damaging the original sound brickwork or concrete, including removal of POP/Gypsum plaster, if any, from walls of any thickness, raking out of joints, daily cleaning and stacking of debris at the prescribed location in polypropylene/paper bags, and disposal of the debris so generated on a weekly basis outside the premises of MD Land, complete in all respects and as directed. Note: For all the Height of Bldg.

M&L for Providing and applying average 25 mm thick plaster on external surfaces of wall, in two coats (15mm + 10mm) using ready-mix, pre-packed and proportioned dry-mix mortar, blended with polypropylene (PP) fibers and mixed with liquid waterproofing compound, on external surfaces of non-fair-faced brick masonry or concrete surfaces, including surface preparation, transportation of materials, mixing, application, finishing, curing, scaffolding, tools and equipment, and all incidental works, complete in all respects as per the specifications and directions of the Engineer-in-Charge. Note :- (i) Liquid water proofing compound will be measured and paid seperately as supply only (ii) For all the Height of Bldg

Supply only liquid waterproofing compound in Cement Mortar while plastering the external and internal faces of the Building.

M&L for providing and applying average 15 mm thick plaster on internal surfaces of wall, using ready-mix, pre-packed and proportioned dry-mix mortar, blended with polypropylene (PP) fibers and waterproofing additives, on external surfaces, including surface preparation, transportation and handling of materials, mixing, application, finishing, curing, scaffolding, tools and equipment, and all incidental works, complete as per the specifications and directions of the Engineer-in-Charge.

M&L for providing and applying average 5 mm thick plaster in two coats on ceiling surfaces using ready-mix, pre-packed and proportioned dry-mix mortar, blended with polypropylene (PP) fibers and waterproofing additives, including surface preparation, transportation and handling of materials, mixing, application, finishing, curing, tools and equipment, and all incidental works, complete as per the specifications and directions of the Engineer-in-Charge.

Material & Labour for applying two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new plastered surfaces complete all as specified and directed.

M & L for preparing old plastered surfaces of external walls by scrapping / rubbing and applying two coats of weather proof acrylic exterior paint (100% Acrylic) over a coat of primer including use of scaffoldings complete all as specified and directed

M&L for applying two coats of oil bound distemper over a coat of primer for the new plastered sufrace of wall and plaster of paris putty of 1 mm thickness over plastered surface to prepare the surface even and smooth complete all as specified and directed.

M&L for complete removal of existing treatment of internal surfaces of wall and applying two coats of oil bound distemper over a coat of primer and plaster of paris putty of 1 mm thickness over plastered surface to prepare the surface even and smooth complete all as specified and directed.