CERTAIN SPECIAL REPAIR AND LBW WORKS AT SUNJUWAN UNDER GE JAMMU

Amount

B/R Portion: - Taking down shutters of any description exc. 1 Sqm but n.exc. 2 Sqm each and removing from site complete all as specified and directed.

Taking down chowkats or frames with shutters exc. 1.5 Sqm and n.exc 4 Sqm each (without taking off shutters from the frame) including cutting holes in brick walls of appropriate size for insertion of cement concrete blocks for hold fasts and and removing from site complete all as specified and directed.

Taking down chowkats or frames with shutters not exc. 1.5 Sqm each (without taking off shutters from the frame) including cutting holes in brick walls of appropriate size for insertion of cement concrete blocks for hold fasts and and removing from site complete all as specified and directed.

Taking down door and Refixing shutters after making necessary repair of any description exc.1 Sqm but n.exc. 2 Sqm each complete all as specified and directed.

S & F Pressed steel frames made of 1.25 mm thick MS sheet of profile 125X 60 mm for doors with one or more rebates including necessary lock strike plate, shock absorber, 20mm dia 60mm long MS conduit for housing of a drop bolt, treating of internal surfaces of chowkhats with coal tar or black paint including hinges, holdfasts/lugs etc complete all as specified and directed.

S & F Pressed steel frames made of 1.25 mm thick MS sheet of profile 105X 60 mm for doors with one or more rebates including necessary lock strike plate, shock absorber, 20mm dia 60mm long MS conduit for housing of a drop bolt, treating of internal surfaces of chowkhats with coal tar or black paint including hinges, holdfasts/lugs etc complete all as specified and directed.

S & F Cement concrete (1:3:6), type C-0 using 12.5 mm graded stone aggregate as in filling of chowkhats, hold fast blocks etc including necessary form work complete all as specified and directed.

S&F 35mm thick 2nd class hardwood plain framed panneled factory made shutters ( two panels) with lock rail & panel of 9mm BWP commercial ply or 12mm veneered particle board with commercial veeneering on both faces fitted to cowkhats complete all as specified and directed.

S&F 35mm thick factory made second class hard wood glazed and skeleton shutters, open rebated and prepared to receive glass, gauze etc (without sash bars), edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass etc, sizes of members of shutters as specified in SSR part-I section 8, clause 8.24(a) complete all as specified and directed.

S&F 30 mm thick PVC factory made panel door shutter(style) consisting of frame made out of MS tubes for top & bottom rail, MS Frame shall be covered with heat moulded wood grain printed PVC channel and 5 mm thickX15 mm wide PVC Sheet beading used inside style and rails and decorative PVC beading of 10x10 mm used instead of exposed portion of PVC sheeet beading as in toilet/kitchen cabinate Shutters Make Rajshree/Sintex or equivelent complete all as specified and directed.

S & F Solid PVC door frame of size 50mmx47mm made out of 5mm plain colour PVC sheet rainforced with MS square tube ccomplete all as specified and directed.

S&F Box type steel windows/ventilator comprised of tubular frame and shutters made out of 1.25 mm thick MS sheet tube factory made with double side shutters wire gauged shutter & glass glazed shutter (wire cloth and glass panes will be measured and paid seperately)with side hung shutters with MS handles and MS peg stay dovetailed or welded incl 02 Nos MS Tower bolts 150 mm long for each leaf and 08 mm square bar grill/guard bars at spacing as shown on Drg welded MS flat iron frame work ,including other fittings ,hinges ,MS handles , tarred hold fasts , PCC blocks for hold fasts , and AC opening if required incl two coat of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed. .

S & F Mild Steel powder coated colour decorative type drapery rod of 20mm dia approved pattern & design including decorative knobs (02xNo for each opening) & powder coated mild steel flat iron brackets fixed with steel screws & PVC rawl plugs/grips complete all as specified and directed.

S&F Galvanised mild steel wire cloth, 0.56 mm nominal dia of wire and average width of aperture 1.18 mm and fixed with tinned tacks,or galvanised wire staples complete all as specified and directed.

S&F 3mm thick sheet glass ordinary quality and glazing with oil putty in square pane complete all as specified and directed.

Description all as per ser item No 15 here in before but figured, pin head type and glazing with oil putty or wooden beads, in squares each pane complete all as specified and directed.

S&F 250mm long aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type), not less than 12mm dia and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy including necessary nuts and bolts complete all as specified and directed.

S&F 200mm long aluminium anodised barrel tower bolts of extruded section (ISI Marked) complete all as specified and directed.

S&F 100mm long butt hinges, medium weight cold rolled mild steel (ISI Marked) all as specified complete all as specified and directed.

S&F 140mm size (overall length of cover plate) floor door stopper of aluminum alloy body and tongue, anodized, with hard drawn steel spring, fixed in floor complete all as specified and directed.

S&F Mild steel 300mm rat rail spring including roller plate complete all as specified and directed.

S&F 150mm long aluminium handle extruded alloy, fabricated 'D' type anodised (ISI Marked) complete all as specified and directed.

M&L for preparation of new wooden surfaces of any description not otherwise described over 10cm in width or girth and applying two coats of synthetic enamel paint over one coat of pink wood primer complete all as specified and directed.

Preparation of old wooden or wood based surfaces of any description over 10cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed.

Preparation of new steel surfaces of any description over 10cm in width or girth not otherwise described and applying two coat of synthetic enamel paint complete all as specified and directed.

Preparation of old painted steel surfaces of any description exc 10cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed.

Dismantling boarding, any description, fixed in any position with nails etc complete all as specified and directed.

Supply and fixing prelaminated particle board, 18/19mm thick, exterior grade, prelaminated one side with decorative choice lamination and other side balancing white lamination incl fixing of TW beading on open edges of particle board complete all as specified and directed.

S & F hasp and staple 100mm long, safety type, aluminium anodised with mild steel hinge pin including bolt to hinge plate and fixed with screws complete all as specified and directed.

Taking down cement plaster/wall tiles from concrete/stone surfaces including raking out joints, hacking for key, scrubbing down with water etc and its removal from site complete all as specified and directed.

M&L for rendering 15 mm thick in CM 1:6 finished even and smooth without using extra cement (internal plaster) complete all as specified and directed.

M&L for rendering 15 mm thick in CM 1:4, finished even and smooth without using extra cement (external plaster) with WPC complete all as specified and directed. Note : WPC shall be paid separately.

M&L for 10 mm thick plaster on ceiling in cement mortar (1:4) finished even and smooth without using extra cement complete all as specified and directed.

M&L two coats of oil bound distemper on new surfaces including preparation of surfaces of walls including one coat of chalk whiting complete all as specified and directed.

Preparation of old decorated surfaces of wall by brooming down and scrapping wherever necessary and applying one coat of oil bound distemper over a coat of wall putty whereever necessary complete all as specified and directed.

M&L for preparation of newly plastered surfaces and applying two coats of white wash on ceillings complete all as specified and directed.

Preparation of old decorated surfaces of ceiling and applying two coats of white wash complete all as specified and directed.

M&L preparation of newly plaster surfaces of wall, soffits/facia etc and applying two coat of exterior emulsion paint over a coat of wall care putty complete all as specified and directed.

Preparation of old decorated surfaces of walls, soffits/facia of chajja/roof slab etc and applying one coat of exterior emulsion paint over a coat of wall care putty complete all as specified and directed.

M&L Preparing plastered or unplastered new surfaces of walls and applying three coats of white wash complete all as specified and directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed.

S & F coloured non skid ceramic tiles 7 to 8 mm thick (Square/rectangular) area of each tiles exceeding 0.11 sqm but n.exc 0.18 sqm, in floors, etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over 15mm thick screed in CM (1:6) complete all as specified and directed.

S & F coloured Glazed ceramic tiles in vertical surface 350x 250x 7mm/450x 350x 7mm thick set and jointed in neat cement slurry and pointed in white or colour cement ot match over & including10mm thick rendering in cement mortar 1:4 complete all as specified and directed.

M&L Vitrified tiles light shade 10mm thick (square/rectangular) polished,area of each tiles not exceeding 0.36 sqm, as in floors etc.set and jointed in neat cement slurry and pointed in white or coloured cement to match shade over and including screed bed 15mm thick in CM 1:4 complete all as specified and directed.

Taking down 15 mm bore galvanized steel water tubing with all fittings fixed complete to walls and ceilings or laid in floors complete all as specified and directed.

Taking down 20 mm bore galvanized steel water tubing with all fittings fixed complete to walls and ceilings or laid in floors complete all as specified and directed.

S & F 15 mm bore medium grade galvanized steel water tubing with all fittings fixed complete to walls and ceilings or laid on floors complete all as specified and directed.

S & F 20 mm bore medium grade galvanized steel water tubing with all fittings fixed complete to walls and ceilings or laid on floors complete all as specified and directed.

Re-fixing old steel tubing and connections in new or old position of 15 mm bore of pipe (walls, ceiling or floor etc) complete all as specified and directed.

Re-fixing old steel tubing and connections in new or old position of 20 mm bore of pipe (walls, ceiling or floor etc) complete all as specified and directed.

S&F in repair 15mm bore stop valves, cast copper alloy (ISI marked) screwed down, high pressure with crutch or butterfly handle, screwed both ends (externally threaded) for iron pipe or for unions complete all as specified and directed.

S&F in repair 20mm bore stop valves, cast copper alloy (ISI marked) screwed down, high pressure with crutch or butterfly handle, screwed both ends (externally threaded) for iron pipe or for unions complete all as specified and directed.

S&F in repair angle valves CP screwed both ends for 15mm bore of iron pipe or for union and fixed complete all as specified and directed

S&F in repairs vitreous china squatting pan, 'Orrissa ' pattern, size 580 x 440 mm white , with integral foot rests complete including provision of lime concrete beding, including connection to P or S trap, and to flushing pipe, anti-syphonage pipe, etc including maing good to floors complete all as specified and directed

S&F in repair PVC low level flushing cistern, 10 litre capacity, symphonic action type, white inlet valve, float, handle, incl brackets, 15mm PVC connection 600mm long, and 32mm dia PVC flushing pipe including fixing of long screw chromium plated complete all as specified and directed

S&F in repairs Vitreous china wash down water closet pan (pedestal pattern), white including fixing bolts,flush pipe and joints complete all as specified and directed by Engr-in-Charge.

S & F in repair wash hand basin 550x400mm vitreous china (white) with cantilever CI/Angle iron brackets embedded in concrete block including brass chromium plated waste coupling 32mm bore, waste pipe PVC 32mm bore, complete all as specified and directed

S&F in repairs 15mm bore pillar cocks chromium plated ,screwed for 15 mm bore of iron pipe or brass ferrule and fixed complete all as specified and directed

S&F in repair stop valves CP with long shank and cup ( concealed type ), screwed both ends for 15mm bore of iron pipe or for union and fixed complete all as specified and directed

S&F in repair CP shower rose wih swivel joints brass chromium plated 125 mm size, including fixing to steel pipe or union complete all as specified and directed

S & F in repairs CP brass towel rail fancy type 600mm long fixed with CP brass screw complete all as specified and directed

S&F in repair Rotational moulded polyethlene water storage tanks of capacity 500 litres, (cylindrical vertical with closed top) hoisted and fixed in position including necessary checknuts & washer and 20 mm dia PTMT ball valve complete all as specified and directed

S & F in repairs sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long complete all as specified and directed

S&F in repair bib taps, long body, fancy type CP, screwed for 15mm bore of iron pipe or for brass ferrule and fixed complete all as specified and directed

Dismantling of 75 mm and100mm dia PVC/cast iron pipes, jointed in cement mortar or lead joints and taking out of trenches if required complete all as specified and directed

S&F PVC (SWR) pipe 100mm dia and vent pipe in any length with or without ears with cement joints laid in trenches or in floor or fixed to walls complete all as specified and directed

S&F PVC (SWR) pipe 75mm dia and vent pipe in any length with or without ears with cement joints laid in trenches or in floor or fixed to walls complete all as specified and directed

S&F PVC (SWR) pipe 50mm dia and vent pipe in any length with or without ears with cement joints laid in trenches or in floor or fixed to walls complete all as specified and directed

S&F 100mm bore sand cast iron pipe, waste and vent pipe in length with or without ears , with cement joints complete all as specified and directed

S&F 75mm bore sand cast iron pipe, waste and vent pipe in length with or without ears , with cement joints complete all as specified and directed

M&L cast iron bends (any radius) ,diminishing pieces or tappers of pipe 100mm bore complete all as specified and directed

M&L cast iron bends (any radius) ,diminishing pieces or tappers of pipe 75mm bore complete all as specified and directed

M&L PVC (SWR) bends (any radius), diminishing pieces or tappers of pipe 100mm bore complete all as specified and directed

M&L PVC (SWR) bends (any radius), diminishing pieces or tappers of pipe 75mm bore complete all as specified and directed

S & F in repair 100mm PVC (SWR) bends with access door, with (ordinary or inverted) spigot with parallel branches with single (Y) laid in trenches or fixed to walls complete all as specified and directed

Demolition brickwork built in cement mortar or cement lime mortar complete all as specified and directed

Brick work with sub class 'B' bricks using old size bricks straight or curved on plan exceeding 6m mean radious built in cement mortar 1:4 complete all as specified and directed.

M&L for 100 mm thick PCC 1:3:6 type C1 using 20mm graded stone aggregate as in plinth protection, concrete shall be laid in alternate bays n.exc. 3m in length, finished fair and even complete all as specified and directed

Demolition of cement concrete (unreinforced) in ground floors and pavings n.exc. 15cm thickness (below or above ground level) and removing from site complete all as specified and directed

M& L PVC (SWR) floor floor trap with steel grating including jointing to waste pipe fixed in cement concrete type BI (1:2:4) dia of outlet in 100mm complete all as specified and directed

M&L for PVC cowls for 75 mm bore of pipe complete all as specified and directed

M & L for PVC (SWR) floor trap 63mm dia for WHB, including 40mm dia HDPE pipe upto the trap of bath room and jointing with solvent with outlet pipes, stainless steel grating etc fixed in repairs complete all as specified and directed

S & F PVC (SWR ) pipes,110 mm bore, single socketed,in any length, with rubber joints, fixed to walls complete including fixing clamps etc with nut & bolts incl taking down of pipe complete all as specified and directed

S & F PVC (SWR ) bend/shoe,110 mm bore, fixed to pipes complete including fixing clamps etc with nut & bolts complete all as specified and directed

Supply only integral water proofing compound.

M & L Cement concrete 1:5:10 (40 mm size coarse agg) as in mass filling in sunken floor of toilets complete all as specified and directed

Rendering 15mm thick in cement sand mortar 1:4 mixed with & including liquid integral water proofing compound 0.20 Ltr per 50 kg bag of cement both on floor and wall after proper curing and drying and apply Epoxy resins coating polymer modified cementation coating like brush bond of Fosroc Pedilite and Bostic as per manufacturer's instructions both on floor as well as on walls of sunken floors complete all as specified and directed

Removing existing treatment from roof surfaces such as tiling, fungs moss, dust etc cleaning the RCC roof surface wire brushing complete all as specified and directed

M&L for Rendering 20 mm thick in CM 1:4 on concrete surfaces (on roof slab) finished even and smooth without using extra cement, mixing liquid water proofing compound complete all as specified and directed ( Note- liquid water proofing compound shall be measured and paid seperately.)

Cleaning and removing loose / dirt materials from the roof surfaces and applying bitumen primer @ 0.30 lit/sqm, providing and laying 3mm thick APP modified water proofing membrane weighing not less than 3.5 kg/sqm reinforced with non woven polyster mat weighing not less than 160 gm/sqm, having softening point not less than 800 N /Sq cm, tearing strength of 180N, with minimum of 10 cm side laps and 15cm end laps, laying by application of torch, and applying two coat of aluminium paint, complete all as specified and directed.

S&F in repair Chromium Plated Peg Set 175mm to 250mm fixing with wall complete all as specified and directed

S&F in repairs soap shelf, PVC white/colour appx size 450x125x40 mm as per sample complete all as specified and directed

S&F in repairs brass CP Mixer of bore dia of pipe 15mm for mixing hot & cold water screwed down for iron pipe and fixed complete all as specified and directed

S&F kitchen plate rack of stainless steel of size 900x800x230mm made out of 1mm thick stainless steel complete all as specified and directed

E/M Portion: - Taking down old unsv copper/aluminium point wiring concealed / batten (light, fan, socket or power) complete, including fixture and fittings such as switches,sockets, ceiling roses,bell push,bell electric,lamp holder,bulk head fitting, pendants, regulators, sockets, light fitting and any type switch board wooden/iron,round block etc removing materials to store for keeping in safe custody or for taking credit (credit for above items should be made as per conditions separately) and making good disturbed surfaces of walls, floors, etc complete all as specified and directed

M&L in replacement for Sub main wiring with proper colour coding , insulated , unsheathed , multistranded ,copper conductor FRLS, cable of 3 run 6 Sqrmm for phase and neutral and one run of 4.0 Sqrmm for earth wire unsheathed , miltistranded , copper conductor FRLS, drawn through the existing rigid PVC concealed conduit fixed on wall. Two runs of cable for phase/neutral and one run of cable for earth will be measured and paid as one unit length incl taking down old wiring complete all as specified and directed Note : Wiring shall be done in proper colour coding.

M&L for Point wiring One light point or One fan point controlled by one switch complete with 1.50 sqmm copper conductor multistrand pvc insulated FRLS and unsheathed cable in existing pvc rigid concealed conduit with New cast iron/pressed steel sunk terminal box covered with 3 mm thick laminated sheet hylam brand IS-2036 marked with continous pvc insulated multistrand copper wire 1.50 sqmm dia FRLS PVC insulated complete all as specified and directed

Description all as per serial item No 98 above but for multi 5 pin 5 amp socket outlet on same board complete all as specified and directed

Description all as per serial item No 98 above but for multi 3 pin socket outlet 5 amp socket on independent board complete all as specified and directed

Description all as per serial item No 98 above but for One light point controlled by two 2 way switches, with cable 1.5 sq. mm complete all as specified and directed

Description all as per serial item No 98 above but for One bell/buzzer point controlled by one push button on the same board with other switches or independent with cable 1.5 Sq. mm size complete all as specified and directed

Description all as per serial item No 98 above but for multi 3 pin 15 Amp socket outlet independent controlled by 15 Amp switch with 2.5 sqmm copper conductor multistrand cable pvc insulated FRLS and unsheathed cable in and including PVC rigid concealed conduit 20/25 mm dia and unsteathed copper conductor multistrand cable 2.5 sqmm as earth wire FRLS pvc insulated in green color all as directed by engr-in-charge.complete with new CI/pressed steel sunken black with Modular plate top shee cover complete all as specified and directed

S&F in replacement for Modular switch 1 way 6A,1 module , 240 volts ISI marked complete all as specified and directed

S&F in replacement for Modular switch 2 way 6A,1 module , 240 volts ISI marked complete all as specified and directed

S&F in replacement for Modular bell push 6A, 1 module , 240 volts ISI marked complete all as specified and directed

S&F in replacement for ceiling rose, 3 Phase/PVC/polycarbonate isolated body complete all as specified and directed

S&F in replacement for Modular switch 1 way 16A, 1 module , 240 volts ISI marked complete all as specified and directed

S&F in replacement for Modular Socket 6A/16A - 6 pin combined 2 module, , 240 volts ISI marked complete all as specified and directed

S&F in replacement Calling bell Ding Dong/buzzer AC 230 Volts, single pole complete all as specified and directed

S&F in replacement for Modular Fan step regulator, 120W 1 module , 240 volts ISI marked complete all as specified and directed

M& L in replacement for Lamp holder, PVC/Polycarbonate type with back plate suitable for batten fittings complete all as specified and directed

M& L in replacement Self ballast LED retrofit Lamp with PVC body and PC Diffuser 9 watt 230 Volt 6500K complete all as specified and directed

S&F in replacement LED lights fitting 1x 20W, 220V, AC decorative box type complete with LED tube rod 20 watts driver, holder and power factor >0.95 , 100 Lumen/Watt, 6500 K cool day type conforming to ISI including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete. (4' ft long ) with LED rod 20 watt, 230 Volts 50 Hz. complete all as specified and directed

S&F in replacement of Vertical Distribution Board (V.TP&N) 12 way double door suitable for and including MCCB 125 Amp 16 KA four pole as incomer and out going 12 Nos MCBs and should be IP 43 protected with Copper BusBars, Neutral Links, Earthing bar complete all as specified and directed.Note:- (i) Rate includes MCCB four pole 125 Amp, 16 KA, 415 volts with adjustable thermal settings. (ii) Rate includes MCB SP 40 Amps 12 Nos 10 KA. DB 63/32 Amps (iii) V TPN DB,MCB and MCCB should be of same make.

M&L for replacement distribution board sheet steel powder coated for MCB with copper bus bar and neutral link earthing stud SPN 8 way 240 volts double door complete all as specified and directed Note:- Distribution board and MCBs should be same make.

Supply and fixing in replacement SPN 40 to 63 Amp rating 240V, 10KA 'B' curve miniature circuit breaker (MCB) of following poles and current carrying capacity in the MCB DB complete with connection testing and commissioning complete all as specified and directed

S&F in replacement 240V, 10 KA 'B' curve miniature circuit breaker (MCB) of single poles and current carrying capacity 5 to 32 AMP, in the MCB DB Complete with connection testing and commissioning complete all as specified and directed

M&L in replacement for Earthing complete with galvanised mild steel earth plate electrode of size 600x600x6mm thick burried directly in ground earth (in vertical) earth pit not less than 2.25 mtr deep below normal ground level with top edge of the earth plate not less than 1.5 mtr below ground level connected to galvanised iron or earth lead wire 4mm dia (8 SWG) by means of nut, bolt, check nuts and washer of galvanised ironl including PCC pit in PCC 1:2:4 type B-1 pre-cast RCC cover slab using reinfocement with suitable handle made of round bar, including necessary excavation and earth work in any type of soil, 20mm dia medium grade galvanised steel tube flor watering with one end fixed with cast iron funnel and wire mesh 15mm dia bore light grade galvanised steel tubing upto 5 m length for drawing earth lead wire protection, common salt, charcoal, etc complete all as shown in electrical plate No 3 of SSR Part-I and testing on completion complete all as specified and directed

S & F Energy saving , environment friendly,long life , exclusive innovative die cast aluminium IP66 flood light 70 watt suitable for highlighting architectural facade and general purpose lighting complete all as specified and directed

Supply,Laying,Testing incuding replacement of cable XLPE insulated,screened,PVC bedded,galvanized steel strip wire armoured,electric power cables (heavy duty) 1100 volts graded with stranded aluminium conductor of size 16sqmm 4 core complete all as specified and directed

S & F in replacement of PVC insulated and sheathed cable of size 1.5 Sqmm 3 core alluminium conductor multi stranded 1100 volt grade 230 volt complete all as specified and directed

Excavating in trenches, n exc1.5 m wide and n exc 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sq m on plan and n exc 1.5 m in depth and getting out in any type of soil complete all as specified and directed

Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cm complete all as specified and directed

Removal of excavated surplus material to a distance not exceeding 50m and depositing where directed at a level not exceeding 1.5m above the starting point complete all as specified and directed

M&L in replacement of terminal box outdoor type, confirming to relevent IS made out of CRCA sheet of 3 mm thick of suitable size front openable hinged type cover with locking arrangement including composing of 4way internal connection/ insulator heavy duy of rating 32 amps and MCB SP 6 Amp, 10 KA -01 no with necessary fixing arrangement to pole with MS clamp of size 25X4 mm duly welded and painted with two coats of senthetic anamel paint over a coat of red oxide primer complete all as specified and as directed.

Taking down existing flood light any capacity including disconnecting complete all as specified and directed

Supply & laying dry river sand as cable cushioning 15cm thick layer before laying and 8cm thick over cable after laying the cable in trench complete all as specified and directed

Supply & laying incuding replacement of dry bricks over cable as mechanical protection layed flat with width equal to length of brick with sub class 'B' bricks complete all as specified and directed

Material and labour in repair for GI pipe ''light grade'' for road crossing / on wall / on pole with fixed clamps, nuts, bolts for cable protection of size 25 mm dia complete all as specified and directed

Supply and fix electric water heater Geyser , storage type steel body with copper inner tank and heating element upto 2 KW capacity 25 litre, BEE 5 Star rated complete with all accessories such as safety valve, thermostate, NRV, connection piece etc complete all as specified and directed

M&L for fixing of 4 Nos rawl plug of suitable size (4"-6") nuts & bolts for hanging of geysers on wall complete all as specified and directed

M&L for Sub main wiring with proper colour coding , insulated , unsheathed , multistranded ,copper conductor FRLSH, cable of 2 run 4 Sqmm for phase and neutral and one run of 4.0 Sqrmm for earth wire unsheathed , miltistranded , copper conductor FRLSH, drawn through rigid PVC conduit fixed on wall. Two runs of cable for phase/neutral and one run of cable for earth will be measured and paid as one unit length complete all as specified and directed

S&F Industrial Plug ,MCB DB 3 Pin With eartg plug CRCA body with MCB 32 Amp complete all as specified and directed

M & L for tubing GI "MG" with all fittings laid in floor/Wall or trenches of size 15 mm dia complete all as specified and directed

S&F Stop valves, cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed for 15 mm dia of pipe complete all as specified and directed

S&F PVC connection of size 15 mm dia with PTMT nuts of length 450 mm long (hot series braded, threaded and cold series) complete all as specified and directed

S&F Bib tap cast copper alloy (CP) with crutch or butterfly handle screwed down , screwed for iron pipe for brass ferrule of size 15 mm bore complete all as specified and directed

M&L for cutting to existing GI pipe of size 25/20/15 mm dia in position for addition/alteration or insertion of TEE for branch connection complete with cutting, threading and jointing/fixing including GI fitting as per site requirement complete all as specified and directed

Supply and fix exhaust fan, steel body AC single Phase. 230V of size 300m sweep with, blades, and frame and louvers complete with louver shutter including fixing rawl plug/nut & bolts complete all as specified and directed

Making holes for 300 mm dia exhaust fan of suitable shape & size into or through brick walls at groung/First floor including plastering for making good to the original surfaces of any description disturbed including painting /distemper matching with the existing colour complete all as specified and directed Note : Rates are deems to be including charges of any type of T&P, Insurance of staff deployed at site.

M&L switch piano flush type single pole oneway 5 Amp complete all as specified and directed

M&L ceiling rose surface bakelite white with three terminal incl connecting and testing complete all as specified and directed

M&L for point wiring for one light/fan point/call bell point controlled by one 5 Amp switch with 1.5 Sqmm single core multistranded copper conductor FRLSH, PVC insulated (unsheathed) heavy duty cable including continuous earth wire of size 1.5 sqmm copper conductor multistrand FRLSH, PVC insulated (unsheathed) drawn into and including new concealed PVC rigid/non metallic conduit and connecting with existing CI/pressed steel terminal boxes including 3.00mm thick hylam brand IS-2036 marked, laminated top sheet cover for mounting switches, sockets, fan regulators etc complete all as specified and directed Note : (a) wiring shall be done by using proper colour coding (b) Earth wire shall be of green colour

NOTE NO 1: - Samples of materials as approved will be kept in GE's sample room. NOTE NO 2: - All fittings and fixtures mentioned above will be fixed to the satisfaction of Engr-in-Charge and GE. NOTE NO 3: - Warranty certificate to the Engineer-in-Charge where ever applicable shall be submitted by the Contractor at the time of fittings.

M/S Sukhmani Construction Co.