PROVN OF TOILET BLOCK AT TCP AND CERTAIN CONNECTING ROADS WITH ANCILLARIES AT CHANDPURI ENCLAVE AT NIWARU MIL STATION

Amount

Excavating over areas, n exc1.5 m deep and getting out in soft/loose soil , complete all as specified and as directed by Engr-in-Charge.

Surface excavation n exc 30cm deep and average 15cm deep in soft/loose soil, complete all as specified and as directed by Engr-in-Charge.

M & L for Excavation in trenches n.exc 1.5 mtr wide and n.exc 1.5 mtr in depth foundation, or not exc 10 Sqm on plan & getting out in soft/loose soil ,complete all as specified and as directed by Engr-in-Charge.

Returning , filling in, including spreading, levelling, watering and well ramming in layers not exc 25cm thick in hard/dense soil, complete all as specified and as directed by Engr-in-Charge.

Removing excavation material/soil n .exc. 50 m and depositing where directed at a level n. exc 1.5 m above the starting point, complete all as specified and as directed by Engr-in-Charge.

Rolling and consolidating formation surfaces in cutting & rolled by 8 to 12 Tonne power Roller complete all as specified & as directed

Forming embankments including raising (or lowering) earth, spreading in layers n exc. 30 cm thick; watering, ramming/rolling and finishing to required size, shape, etc., n exc. 1.5m high from base (Note approved earth taken from adjacent /near by site)

M & L for solling (or sub base) 200mm spread thickness with broken boulder or quarried stone interstices filled surfaces formed and rolled and consolidated to required gradient and camber with 8 &to 12 tonne power roller complete all as specified & all as directed

M&L, 150mm thick (compacted thickness) water bound macadam in two layers each of 75 mm thick (each layer to be rolled and consolidated separately) with coarse aggregate of granite / black trap / basalt stone of grading 2 (ranging from 63mm to 40mm, hollows made up to form true surface, spread, surface binding with and including screening and moorum, watered, consolidated and rolled with 8 to 12 tonne power roller to gradient and camber required.

M & L for preparing surfaces by brushing with wire brushes for removing caked mud etc, sweeping with broom and finally fanning the cleared surface with gunny bags to remove all loose dirt etc on unsurfaced water bound macadam complete all as specified & as directed

M & L for applying evenly a priming/tack coat with paving bitumen primer at 10 Kg per 10 Sqm complete all as specified & as directed.

M&L for Premix bituminous macadam binder content of paving bitumen any penetration laid/rolled and compacted to required gradient and camber (consolidated thickness 75mm or less) complete all as specified and directed.

M & L for preparing surfaces by brushing with wire brushes for removing caked mud etc, sweeping with broom and finally fanning the cleared surface with gunny bags to remove all loose dirt etc on black top surface complete all as specified & as directed

M & L for applying evenly a priming/tack coat with paving bitumen primer at 5 Kg per 10 Sqm complete all as specified & as directed.

M & L for paving bituminous premixed Semi dense asphaltic dense concrete 40mm consolidated thickness but with 5.5% binder content concrete of total mix, rolled and compacted to required camber and gradient complete all as specified & as directed.

M&L for preparation of new or old black top surface Painting lines, dashes, arrows, letters, etc. on roads, pavements and the like exc 10cm wide with road marking paint, white or golden yellow all as per manufactureers instructions and all as specified and directed.

M&L Cement concrete 1:4:8 (40mm graded stone aggregate) as in foundationn, filling and mass concrete, complete all as specified and as directed by Engr-in-Charge.

M&L for walling of RR Stone Masanary, uncoarsed, well bonded bedded & solidly hearted built in cement mortar 1:6, complete all as specified and as directed by Engr-in-Charge.

M&l for Brick work with sub class 'B' bricks straight or curved on plan exc.6 metre mean radius built in Cement Mortar 1:4 in walls,complete all as specified and as directed by Engr-in-Charge.

M&l for brick work with subclass `B' bricks, straight or curved on plan exc 6m mean radius, built in CM 1:6 , complete all as specified and as directed by Engr-in-Charge.

M&L of RCC M-25 (Design Mix) as in Slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like, complete all as specified and as directed by Engr-in-Charge.

M&L for Reinforced cement concrete (design mix) M -25 ( using 20mm graded stone aggregate) as in columns, pillars, piers, posts & struts etc complete all as specified and directed by Engineer-in-Charge.

M&L for Reinforced cement concrete (design mix) M -25 ( using 20mm graded stone aggregate) as in lintels up to -1.5m clear span, seismic and other similar bands, lintel bands, plinth bands, roof bands and the like, complete all as specified and as directed by Engr-in-Charge.

M&L for Reinforced cement concrete (design mix) M -25 ( using 20mm graded stone aggregate) as in chajjas, complete all as specified and as directed by Engr-in-Charge.

M&L of use and waste of formwork for Formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; exceeding 200mm thick for rough finished, complete all as specified and as directed by Engr-in-Charge.

M&L of use and waste of formwork for sides of Beam etc for rough finished, complete all as specified and as directed by Engr-in-Charge.

Formwork to sides of concrete foundations, footings, base of columns, rafts and raft beams sides & soffits (if any) of foundation and plinth beams and similar work, vertical or to batter rough finished surfaces of concrete, complete all as specified and as directed by Engr-in-Charge.

Forwork to edges of roofs n. exc 20cm wide with rough finished surface of concrete, complete all as specified and as directed by Engr-in-Charge.

S&F deformed or twisted mild steel bars 10mm dia and over,cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mmdia or securing with clips, complete all as specified and as directed by Engr-in-Charge.

M & L Providing cement concrete in copings type C1 built in 1:3:6, complete all as specified and as directed by Engr-in-Charge.

M&L 40mm thick PCC (1:2:4) type B0 as in DPC to horizontal or vertical surfaces including necessary formwork, complete all as specified and directed by Engineer-in-Charge.

S&F deformed or twisted mild steel bars 6 to 8 mm dia and over,cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mmdia or securing with clips, complete all as specified and as directed by Engr-in-Charge.

M&L Rendering 15mm thick in CM 1:4 on stone masnory surface or surface other than fair face of brick work wall, finished fair and even, complete all as specified and as directed by Engr-in-Charge.

M&L for Rendering 10 mm thick on brick wall surfaces, in CM (1:6) and finished even and smooth surface without using extra cement, complete all as specified and as directed by Engr-in-Charge.

M&L Rendering 5mm thick in CM 1:3 on ceilings surface finished fair and even, complete all as specified and as directed by Engr-in-Charge.

Material and labour for three coats of white lime wash newly plastered surfaces of ceiling including preparation of surfaces etc, complete all as specified and as directed by Engr-in-Charge.

Material and labour for three coats of white lime wash newly plastered surfaces of walls including preparation of surfaces etc, complete all as specified and as directed by Engr-in-Charge.

Material and labour for preparation of newly plasterd surface of wall and applying two coats of cement base paint of approved shade/tint etc, complete all as specified and as directed by Engr-in-Charge.

M & L for hardcore(broken stones & boulders) of gauge n exc. 63mm, deposited, spread and levelled in layers n exc. 15 cm thick, watered and rammed to a true surface, complete all as specified and as directed by Engr-in-Charge.

M&L for 75mm thick PCC (1:4:8) type D-2 using 40 mm graded stone aggregate as in sub-floors, sub-bases, floors and pavings etc, complete all as specified and as directed by Engr-in-Charge.

M&L for40mm thick PCC 1:2:4 type B-2 using 40mm mechanical crushed stone aggrgate Cement concrete as in floor, complete all as spd.

M&L for coloured Non Skid ceramic coloured tiles joint free 7 to 8mm thick (squares/rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match, complete all as specified and as directed by Engr-in-Charge.

M&L for coloured Glazed ceramic colored tiles size 300x450x7 to 8mm thick edge cut/joint free, on wall etc in the combination of light and dark shed concept. Set & jointed in neat cement slurry and pointed in white or coloured cement to match over 10mm thick plaster in CM (1:4), complete all as specified and as directed by Engr-in-Charge.

Material and labour, applying Two coat of synthetic enamel paint on wooden surface including preparation ofnew wooden surfaces of any description over 10cm width or girth, complete all as specified and as directed.

Material and labour, applying Two coat of synthetic enamel paint on steel surface including preparation ofnew steel surfaces of any description over 10cm width or girth, complete all as specified and as directed.

S&F Figured glass, 3.0mm thick pin head type and glazing with oil putty in squares n exc 0.5 sq.m in each pane, complete all as specified and as directed by Engr-in-Charge.

S&F steel ventilators with top hung shutters including hinges, steel peg stay, complete with glazing bars etc complete all as specified and directed.

S&F Factory made solid panel pvc door shutter 30mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails, M.S. frame shall be covered with heat moulded palin colour PVC `C' channel heaving a PVC sheert strip of 20mm width suck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bbottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S frame wedded/ sealed to the stiles, & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing.

Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S Square tube, suppling & fixing in opening as per specification & drawing

S&F 100 mm butt hinges medium weight cold rolled mild steel, ISI marked, fixed to angle iron chowkats including welding, complete all as specified and directed by Engineer-in-Charge.

Supply and fixing aluminum anodised pressed handle, cast type ,150mm long, complete all as specified and as directed by Engr-in-Charge.

S&F Aluminium, anodised, barrel tower bolts 200mm long of extruded section, complete all as specified and directed by Engineer-in-Charge.

Supply and fixing 300 mm long Aluminum alloy , anodised, sliding door bolt ,with hasp staple( bolt type) and fixing clips of sheet , cast or extruded section and fixing bolt and sliding bolts of extruded section or cast aluminum alloy, complete all as specified and as directed by Engr-in-Charge.

M&L 2nd class hard wood as in 35mm thick made Plain framed, panelled shutter (two panel) with lock rail and panel of 9 mm B.W.P commercial ply or 12 mm veneered particle board with commercial venneering on both faces. The size of rail and stile as per IS: 1003 (Part I), kiln seasoned and chemically pressure treated (2nd Class HW rail & style), complete all as specified and as directed by Engr-in-Charge.

S&F MS Framed work Fe 410-W (Gde-E-250) quality A as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering, Doors etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive or steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing, complete all as specified and as directed by Engr-in-Charge.

Supply and fixing , 15 mm bore galvanised steel tubes, medium grade with all fittings for water supply pipes etc fixed to walls and ceilings or laid in floors including chase cutting, complete all as specified and as directed by Engr-in-Charge.

Supply and fixing , 20 mm bore galvanised steel tubes, medium grade with all fittings for water supply pipes etc fixed to walls and ceilings or laid in floors including chase cutting, complete all as specified and as directed by Engr-in-Charge.

Material and labour for 75 mm thick cement concrete type C-2, 1:3:6 ( using 20 mm graded aggregate) as in plinth protection/path , complete all as specified and as directed by Engr-in-Charge.

Supply and fixing white flate back wash hand basin, size 630x450 mm including brackets, waste pipe 32mm, coupling etc fixed as in counter slab etc, complete all as specified and as directed by Engr-in-Charge.

Supply and fixing s fancy type stop valve/angle valve cast copper alloy screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipes of 15mm bore, complete all as specified and as directed by Engr-in-Charge.

Supply and fixing , 15 mm bore pillar taps, fancy type, cast copper alloy, chromium plated with capstan heads, screwed down high pressure with or without lettered Hot or Cold with long screwed shanks and fly nuts, screwed for iron pipe, complete all as specified and as directed by Engr-in-Charge.

Supply and fixing 15 mm bore two way Bib taps, fancy type, cast copper alloy, chromium plated with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule, complete all as specified and as directed by Engr-in-Charge.

Supply and fixing PVC valveless, syphonic action type, flushing cistern (ISI marked) of 10 litres capacity, low level (white) with inlet, ball valve, float and handle including bracket and flush pipe, complete all as specified and as directed by Engr-in-Charge.

Supply and fixing brass chromium plated fancy type towel rail 600mm long, complete all as specified and as directed by Engr-in-Charge.

Supply and fixing PVC connections 15mm bore, 450 mm length with PTMT nuts, complete all as specified and as directed by Engr-in-Charge.

Supply and fixing for PVC (SWR) pipes, 110 mm ISI mark, single socketed, in any length with rubber ring joints, laid in trenches or in floors or fixed to wall, complete all as specified and as directed by Engr-in-Charge.

Supply and fixing for PVC (SWR) pipes, 75 mm ISI mark, single socketed, in any length with rubber ring joints, laid in trenches or in floors or fixed to wall , complete all as specified and as directed by Engr-in-Charge.

S&F PVC (SWR) bends of radius 110 mm, complete all as specified and as directed by Engr-in-Charge.

S&F PVC (SWR) bendsof radius 75 mm, complete all as specified and as directed by Engr-in-Charge.

S&F 110 mm dia PVC (SWR) junction single, (Single T) equal or unequa, complete all as specified and as directed by Engr-in-Charge.

S&F PVC (SWR) vent cowl of radius 75 mm , complete all as specified and as directed by Engr-in-Charge.

S&F PVC water tank of capacity 500 ltrs cpacity including supply and fixing PVC water storage tank of 500 ltrs capacity HDPE double layered , cylindrical type fixed and hoisted in position on roof at any height complete with inlet/outlet of 20mm GI pipe connection including locking arrangement with ball valves high pressure with epoxy coated aluminium rod and high density plastic ball fixed, complete all as specified and as directed by Engr-in-Charge.

S&F Toilet paper holder, vitreous China,box type, complete all as specified and as directed by Engr-in-Charge.

S&FCast iron floor trap, with grating including jointing to waste pipe fixed in cement concrete type B1 (1:2:4), complete all as specified and as directed by Engr-in-Charge.

Supply and fixing , vitreous china urinal , half stall type white with gratings, union for discharge pipe , flush pipe and waste pipe , CP urinal spreader fixed to water supply pipe etc, complete all as specified and as directed by Engr-in-Charge.

Supply and fixing PVC (SWR) gully trap 125/110 mm, setting and jointing with solvent cement for 110 mm external dia, type-B pipes, complete all as specified and as directed by Engr-in-Charge.

M&L Machine cut kota stone slab 20mm thick as in urinal parition jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing , complete all as specified and as directed by Engr-in-Charge.

S&F Viterous China wash down water closet pan (pedestal pattern), white (excluding fixing bolts, flushing cistern and flush pipe), complete all as specified and as directed by Engr-in-Charge.

Health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position,complete all as specified and as directed by Engr-in-Charge.

150 mm dia SRCC NP3 150 mm diameter Pipes laid on 150 mm thick bed with excavation in any type of soil, including manholes/drop manhole of standard size made of Brick masonry/RCC/Precast RCC with SFRC ventilatingcover and frame. Includes all items and activities to execute and amke sewer line functionl, complete all as specified and as directed by Engr-in-Charge.

Septic tank for 25 users capacity :- M&L on site LLDPE septic tank designed to carry sewage and sullage water, excavation in any type of soil, PCC 1:4:8 below foundation, Vent shaft, connection etc, complete all as specified and as directed by Engr-in-Charge.

Soakage Well:- M&L soakage wells excavation, in any type of soil, foundation in pCC 1:3:6, walls of honey combed masonry with top ring of M25 concrete inluding intercepting chamber and screen chamber made of Brick bats of size, complete all as specified and as directed by Engr-in-Charge.

Supply, spreading, leveling well ramming including watering and consoildration sand cushioning under ground cable for protection 8 cm before laying and 15 cm after laying with dry fine river sand, complete all as specified and directed by Engineer-in-Charge.

Supply and laying well burnt sub class 'B' bricks (designated 75) locally available best quality, laid dry in trenches for protection of underground cable, complete all as specified and as directed by Engr-in-Charge.

Supply, laying and testing cable XLPE insulated, screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 6.0 sqmm 2 core, complete all as specified and as directed by Engr-in-Charge.

S&F galvanised steel tubing light grade 25 mm dia for protection of under ground cable on poles / walls under road crossing, complete all as specified and as directed by Engr-in-Charge.

M&L for new galvanised steel water tubing medium grade with all fittings and fixed complete to trenches of 25 mm bore of pipe, complete all as specified and as directed by Engr-in-Charge.

M&L for cutting of GI pipe 25 mm dia in position for reducting to required length for insertion of new tees, branches etc, complete all as specified and as directed by Engr-in-Charge.

S&F gun metal gate valve with iron wheel head screwed both ends for iron pipe and fixed bore of pipe of 25 mm dia, complete all as specified & directed by Engr-in-Charge.

M&L for point wiring with 1100 volts grade PVC insulated FRLS multistranded copper conductor cable 1.5 Sqmm (Phase - Red, Neutral - Black) and earth continuity conductor 1.5 SQmm (Green) drawn into and including concealed rigid non metallic PVC conduit medium grade not less than 25 mm dia ISI marked ivory colour with all conduit fittings / fixing accessories and unwelded sunken galvanized pressed steel terminal boxes covered with 3mm thick hylam/phenolic laminate while sheet cover for mounting switches, sockets, fan regulators as required for the following (a) One light point controlled by one, one way switch

(b) One socket outlet 5 Amps, 3 Pin on independent board

(c) One socket outlet 5 Amps, 5 Pin on same Board

S&F Switch piano flush single pole one way 5/6 Amp, complete all as specified & directed by Engr-in-Charge.

S&F socket outlet flush type 5/6 pin 5/6 Amp, complete all as specified and directed by Engineer-in-Charge

S&F Lamp holder, PVC/Polycarbonate type with cord grip cap suitable for pendent/Angle type including taking down, complete all as specified and directed by Engineer-in-Charge. (Make:- Anchor /Legrand/ Havells, Lamp- Bajaj/ Philips /Havells)

S&F exhaust fan, steel body AC Single phase 230 V of size 300m sweep with, blades, and frame and louvers, complete all as specified and directed by Engineer-in-Charge.

S&F LED bulb 10 watt, 5 Star rating in Cool white/Warm white/Natural white, complete all as specified and directed by Engineer-in-Charge. (Make:- Phillps/ Surya Havells)

S & F LED buk head ligh 7/9 W high light luminair comprises of extruded channel in thermally conductive material glare and smooth lightwith, complete all as specified and directed by Engineer-in-Charge.

S & F sheet metal enclosure for MCB's distribution board, 240 Volts, 4 ways single pole and neutral including 200 Amps rated busbar, neutral link, din rail double door for breaking capacity 10 KA, complete all as specified and directed by Engineer-in-Charge. (Make:- Phillps/Surya/Havells)

S & F MCB single pole and Neutral 32 Amps, 240 Volts, breaking capacity 10 KA, complete all as specified and directed by Engineer-in-Charge.

S&F MCB single pole 6-32 Amps, 240 Volts, breaking capacity 10 KA, complete all as specified and directed by Engineer-in-Charge.

Earthing complete with galvanised steel earth plate electrode 60 CM x 60 CM x 6 mm thick buried directly in ground (earth pit not less than 2.25 mtr deep below normal ground level) with top edge of earth plate not less than 1.5m below normal ground level connected to galvanised earth lead wire 4.00 mm dia by means of bolts, nuts, check nuts and washers of galvanised iron/steel all as shown in electric plate No 3 connected to earth test point/MCB DBs all as specified and indicated compete with funnel, charcoal, dust, salt etc and GI protection pipe, medium grade 15mm bore and GI watering pipe 20mm bore light grade, 40mm thick precast RCC M-15 (nomial mix) cover reinforced with XPM weight not less than 4 Kg/Sqm with suitable handle of 6mm dia MS bar and angle iron 40x40x3mm frame for cover, PCC M-15 (Nominal mix) pit, excavation and earth work in any type of soil and connected all as specified .Note:-soil used for filling should be free from stones.

Shiv Construction Company (BID ID -3167043)