Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Tender Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹16.9 LAccepted-AOC | L1 | Accepted-AOC L1 | |
| 2 | L2₹20.5 L+₹3.5 L (21.0%)Rejected-AOC | L2 | Rejected-AOC L2 | |
| 3 | L3₹21.2 L+₹4.3 L (25.3%)Rejected-AOC 29688 GADI NO 0 NEAR DUGAL RESORT POPAL NAGAR BATHINDA | BATHINDA | BATHINDA | PUNJAB | L3 | Rejected-AOC L3 | |
| 4 | Rejected-Technical 30 HOME LAND ENCLAVE BATHINDA | BATHINDA | PUNJAB | 151001 | - | Rejected-Technical Non-Resposive | |
| 5 | Rejected-Technical | - | Rejected-Technical As per Notification No 75/52/79-C1(5)8856 dated 04.11.2019 |
Tender Value
₹20.0 L
EMD Value
₹39,998
Closing Date
8 Jun 2023, 11:00 amClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Executive Engineer WSS Div No 3 Bathinda
Executive Engineer, Water Supply and Sanitation Div No 3, Bhagu Road, Bathinda
Repair Of He, She and Handicapped Toilet In all floors of North-East Corner and Ground Floor, First Floor, Second Floor in South- East Corner In District Administrative Complex, Bathinda (Punjab)
2023_WSS_103368_1
2637-46 dated 01.06.2023
Open Tender
Civil Works - Others
Item Rate
90 days
Bathinda
Please refer Tender documents.
2 documents required · 2 mandatory
₹1,000
Yes
₹39,998
Yes
21 Jul 2023
1 Jun 2023
8 Jun 2023
1 Jun 2023
8 Jun 2023
1 Jun 2023
Amount
30.74(iii)A) Providing and fixing in position singel socket SWR UPVC soil waste or antisyphonage pipes as per IS 13592 of E.D.C manufacture or of any other reputed firm including cutting, jointing, wastage, but excluding cost of jointing. Single Socket Type A b) 110mm o/d single socket SWR UPVC pipe lines laid complete
d) 90 mm o/d single socket SWR UPVC pipe lines laid complete
30.81(iii) Providing and fixing in position SWR UPVC special for soil waste vent or anti syphonage pipes as per as per IS - 14735 including cutting and wastage etc. cutting holes in walls roofs or floors etc. and making good to its original condition but excluding cost of lead joining. (b) For 110mm o/d pipes ii) Single Tee
v) Elbow 90 Degree (All side socketed)
vi) Vent Cowls
viii) Coupler
i) Single Tee With Door
ix) P Trap/Floor Trap 110mm x 110mm
NS) Offset 110mmx110mm
C) For 90mm o/d pipes v) Elbow 90 degree (all side socket)
vi) Vent Cowls
viii) Coupler
i) Single Tee With Door
iii) Single Tee
30.80) Providing and fixing in position SS Grating with frame of approved make (to the approval of engineer in charge) complete in all respects.
30.77C) Providing PVC solvent cement joints to SWR Pipes and specials including cost of PVC solvent cement and tools etc of approved make (to the approval of Engineer-in-charge ) b) 110mm o/d
c) 90mm o/d
28.19) CONCEALED IN WALL: Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes as per IS 15778 (ISI marked with the prior approval of Engineer-in- Charge), having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings i/c fixing the pipe with clamps at 1.00 m spacing including jointing of pipes & fittings, with one step CPVC solvent cement and testing of pipes complete as per direction of Engineer-in-Charge. b) SDR 11 CPVC pipes & fittings 20mm o/d
c) CPVC SDR 11 Pipe & fitting 25mm o/d
30.85a) Cutting chase in brick walls in cement or in floor for embedding G.I. or C.I pipes lines and making good the same to its original condition. Size 75mm x 75mm
28.56) Cutting holes upto 23cm square through B.B. in cement walls or stone masonary wall in cement for pipes, and making good the same & finishing according to existing finish where required. a) Through wall 11.43 cm thick
b) Through wall 22.86 cm thick
NS) Providing, fixing and jointing CPVC Union Couplings in CPVC Pipe lines complete in all respect. c) 25mm i/d CPVC Union
28.44) Providing, fixing and jointing Brass Ball valves screwed with SS/BRASS ball & spindle & Teflon seats, on G.I. Pipe lines including all carriages complete. d) 25mm i/d Brass Ball valves
28.35) Providing ,laying, jointing, fixing and testing ISI Marked G.I. Pipe (as per IS 1239) B- Class including cost of specials (such as tees, bends, sockets, elbows etc.) ,painting with anti corrosive bitumastic paint, testing, cutting, threading Inside building complete. 32 mm i/d
28.45) Making connection with the existing G.I. branch main up to 40mm size pipe including cutting of existing pipe line, threading of pipe lines from both ends and fixing of G.I Tee etc. in the pipe line (including cost of G.I Tee) complete in all respects.
30.4) Providing and fixing in position Chinaware European type water closet P trap or S trap of approved make (to the approval of the Engineer-in-charge) consisting of 10 ltr. PVC flushing cistern ISI marked, PVC short bend 32 mm dia including cost of seat cover complete in all respect and to the entire satisfaction of Engineer-in-charge.
30.8b) Providing and fixing jet spray with 2'-6" long PVC pipe.With PTMT nut
30.64C) Providing & Fixing in position C.P. Brass Hexa Nipple 15mm of approved make (to the approval of Engineer-in-charge ) complete in all respect.
30.16) Providing and fixing in position vitreous Chinaware white lIndian make large flat back or angular lipped front urinal 375 x 390 x 590 mm of approved make (to the approval of the Engineer-in-charge) consisting of C.P. brass Urinal waste Coupling dome type 32mm outer length 75 mm , C.P. brass Urinal Spreader Ocular-Regular and C.P. brass tube connection 300 mm long complete
30.32) Providing and fixing in position vitreous chinaware white lavatory suites of approved make (to the approval of Engineer-in-charge) consisting of C.P. brass waste 32mm dia with one C.P. brass pillar tap including Rack Bolt Screw Pair 115mm long complete in all respect. vii) Size 49 cm dia (above counter round) Labour Rate
30.60) Providing and fixing in position C.P. brass soap dish of approved make (to the approval of Engineer-in-charge ) fixed into wall with rawl plugs and C.P brass screws complete in all respect.
30.61a) Providing & Fixing in position 5mm thick bevelled edge mirror of superior glass (of approved make) complete with 4mm thick hard board backing fixed in with rawl plugs 50mm, C.P. brass screws and washers and S/S Studs on top complete in all respect (as required by the Engineer-in- Charge) Size 600mmx450mm
30.65A) Providing & Fixing in postion 15 mm i/d bib cock of approved make (to the approval of Engineer-in-charge )complete in all respect. vi) PTMT Tap/Bib cock
NS) PTMT Swan Neck
30.66) Providing & Fixing in postion stop cock / Angle valve of approved make (to the approval of Engineer-in-charge ) complete in all respect. b) C.P.brass 15mm Concealed stop cock with flange
e) PTMT 15mm stop cock Male and female end
30.64A) Providing & Fixing in position C.P. Brass flange Dome of approved make (to the approval of Engineer-in-charge ) under various fixtures complete in all respect.
30.64B) Providing & Fixing in position C.P. Brass extension piece 25mm long to 100mm long of approved make (to the approval of Engineer-incharge )with various fixtures complete in all respect. C.P. Brass extension piece, 25mm long to 50mm long
30.72) Providing & fixing in position PVC flexible tube connection of approved make (to the approval of Engineer-in-charge ) complete in all respect. e) PVC tube connection of size 15 mm x 450 mm with PTMT nut
30.21B) Providing and fixing partition for different type of urinals ii) Large partition size 75 x 16.5 x36.5cm
30.20) Providing and fixing P.V.C Waste Pipe Collapsiable 32mm complete in all respect
14.123) Providing and laying Rectified Porcelin floor tiles 400x400mm or more (thickness to be specified by the manufacturer) of premium quality conforming to IS:15622 of approved make in all colours laid on 20mm thick bed of Cement Mortar 1:4 ( 1 Cement : 4 Fine sand) for new flooring or laid with cement based high polymer modified quick set tile adhesive (water based) of approved make IS 15477 marked using 5 Kg adhesive per Sqm of tile area in average 3mm thickness over existing floor, including pointing the joints with white cement and matching pigments etc., complete
Extra rate for First Floor
Extra rate for Second Floor
Extra rate for Third Floor
14.127) Providing and fixing 1st quality ceramic glazed wall tiles Matt/Semi Matt/Glosy/Highly Gloss finish/Highlighter/emboss conforming to IS : 15622 (thickness to be specified by the manufacture of approved make in all colours, shades except burgundy, bottle green, black of size 450 x 310 mm as approved by Engineer-in- Charge in skirting, risers of steps and dados over 12 mm thick bed of cement Mortar 1:4 (1 cement:4 fine sand) and jointing with grey cement slurry @ 3.3kg per sqm including pointing in white cement mixed with pigment of matching shade complete.
Extra rate for First Floor
Extra rate for Second Floor
Extra rate for Third Floor
13.57) Supplying and filling cinder on roof (1st Story) including light ramming (Labour Rate)
(Through Rate)
Extra rate for First Floor
Extra rate for Second Floor
Extra rate for Third Floor
10.13a(i) Cement concrete 1:2:4 With stone ballast or shingle mixing by manual means
NS) Providing & fixing 10mm to 12mm thick marble strips in joints 25mm wide
NS) Providing labour for cleaning old wall tiles with acid/cleaner and refilling white cement complete in all respects.
14.125) Providing and fixing 1st quality ceramic glazed wall tiles Matt/Semi Matt/Glosy/Highly Gloss finish/Highlighter/emboss conforming to IS : 15622 (thickness to be specified by the manufacture of approved make in all colours, shades except burgundy, bottle green, black of size 200 x 300 mm, 100x200mm, 200x200mm as approved by Engineer-in-Charge in skirting, risers of steps and dados over 12 mm thick bed of cement Mortar 1:4 (1 cement: 4 fine sand) and jointing with grey cement slurry @ 3.3kg per sqm including pointing in white cement mixed with pigment of matching shade complete
30.94) Dismantling of wall tiles at any floor of the building, laid in cement mortar including scraping of cement plaster and disposal of malba at a suitable place within a distance of 100 Mtrs of the complex complete in all respect.
30.86) Dismantling H.C.I Soil pipes including disposal as desired by the Engineer-in-Charge. a) 100mm i/d H.C.I. pipe(Qty same as 110 mm o/d SWR pipe)
b) 75mm i/d H.C.I. pipe e(Qty same as 90 mm o/d SWR pipe)
30.87) Dismantling H.C.I specials including dismantalling of lead joints including cartage / disposal within 5 Km. a) 100mm i/d H.C.I. specials
b) 75mm i/d H.C.I. specials
30.88) Dismantling Sanitary fixtures such as Eurpoean/Indian/Orissa W.C., PVC / China ware cistern, Wash Hand Basin, Urinal Pot, Sinks and CP Fittings and disposal of dismantled material within a distance of 100 Mtr. complete in all respect as required by Engineer-in-Charge. a) Eurpoean/Indian/Orissa W.C.,
b) PVC / China Ware Cistern
c) Wash Hand Basin / Urinal Pot
e) CP Bib Cock/Angle Cock/Stop Cock/Shower/Bottle Trap
NS) Dismantling of Marble/Kota Stone/ Terrazo floor including remaining Conc.Base/Sand/Cinder up to 0.60m depth including loading & unloding at GF from any floor (Qty as per Floor tile)
8.26) Removing Doors and Windows (Steel or wood) with chowkhats by making recesses in walls when the wall is not to be dismantled. a) Doors of area 3 sqm and below.
8.6(d) Dismantling concrete Cement concrete plain1:2:4 mix
NS) Labour for carrying dismantled material
5.2(i) Carriage of Surkhi, sand, bajri, ballast, stone, boulders, kankar, building rubbish Carriage of material excluding initial lead of 5 Km a) Jalalabad Sand (Av. Lead 80 km)
b) Ghaggar Sand (Av. Lead 300 km)
c) Bajri (Av. Lead 300 km)
11.6) First class burnt brick work laid in cement sand mortar 1:5 in first storey upto 4 metres above plinth level
Credit of old dismantelled such as HCI, GI Pipes, Taps, Nipples etc.
THE SATNAM CO-OP L AND C SOCIETY LTD
THE BHAGU ROAD CO-OP L AND C SOCIETY LTD
stage.html
html • 0.05 MB
tech_eval.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .