Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹44.0 LAccepted-AOC VILL PO BUNGWAN KALAN TALBEHAT LALITPUR UTTAR PRADESH 284136 | TALBEHAT | LALITPUR | UTTAR PRADESH | 284136 | L1 | Accepted-AOC LOWEST BIDDER | |
| 2 | L2₹47.5 L+₹3.5 L (8.00%)Rejected-AOC | L2 | Rejected-AOC NOT LOWEST BIDDER | |
| 3 | L3₹47.5 L+₹3.6 L (8.13%)Rejected-AOC NEAR PUMP HOUSE ROAD NEAR RED ROSE SCHOOL BABINA CANTT JHANSI DISTT UP 284401 | JHANSI | UTTAR PRADESH | 284001 | L3 | Rejected-AOC NOT LOWEST BIDDER |
| Sl No | Description | Qty | Unit | M/S A.R BUILDERS L1 | M/S Ritu Tandon L3 | MS SHUBHAM SANTOSH JAIN L2 |
|---|---|---|---|---|---|---|
| 1.00 | Excavation in trenches not exceeding 1.5 m wide and not exceeding 1.5 m in depth and getting out in soft/loose soil etc. including trimming bottom and sides of trenches, leveling/ grading and ramming bottom of excavation complete all as specified and directed. | 20 | Cum | 300 ₹6,000 Lowest | 350 ₹7,000 | 500 ₹10,000 |
| 2.00 | S&F Hand rails, half round or other steel section or core for wooden hand-rail straight portion, drilled and countersunk for balusters running bars, for doors, balusters, nosing to steps including embeding in concrete and screwing etc. wind ties for roof including securing bolts; posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc.; flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc.,
and similar work conforming to Fe-290 Gde E-165, complete all as specified and directed by Engineer-in-Charge. | 400 | Kg | 126 ₹50,400 | 125 ₹50,000 | 110 ₹44,000 Lowest |
| 3.00 | Fixing only chain link fencing incl line wires, any mesh, size and type to any type of standards, rails, straining bolts etc including provn of binding wire complete all as specified and directed. | 100 | Sqm | 40 ₹4,000 | 25 ₹2,500 Lowest | 80 ₹8,000 |
| 4.00 | Supply only chain link MS galvanised medium coated confirming to as per IS-2721-1979 fencing any size and type. complete all as specified and directed. | 160 | Kg | 145 ₹23,200 | 155 ₹24,800 | 110 ₹17,600 Lowest |
| 5.00 | S&F 10mm dia of shank Mild steel screw bolts (machine made) with hexagonal or square heads at one end and screwed the other, each screwed end to be fitted with washers and one hexagonal or square nut, exc 5 cm but n.cex 10cm long complete all as specified and directed. | 10 | Kg | 190 ₹1,900 | 200 ₹2,000 | 130 ₹1,300 Lowest |
| 6.00 | S&F Mild steel round bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for Chain link fencing confirming to Fe 410-w (Gde E-250) complete. | 200 | Kg | 110 ₹22,000 | 115 ₹23,000 | 100 ₹20,000 Lowest |
| 7.00 | M & L for preparation of new steel surfaces of any description not otherwise described n.exc10 cm width or girth and applying two coats of synthetic enamel paint over one coat of red oxide zinc crome primer all as specified | 20 | 10RM | 80 ₹1,600 Lowest | 100 ₹2,000 | 140 ₹2,800 |
| 8.00 | S&F Framed/ Unframed work as in doors or gates of angle or other section with gusset plates,rails,braces,also small article for old gates etc complete,all small articles including drilled for fixing of steel sheeting or other covering etc to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings and hanging also fastening and fixing complete all as specified and directed. | 120 | Kg | 125 ₹15,000 Lowest | 125 ₹15,000 Lowest | 130 ₹15,600 |
| 9.00 | S&F MS sheets1.25mm plain black sheet cut to size,holes punched including rounded headed scarews, clout nails or rivets and fixed to steel framing with plain 40mm lap joints with riveted or welded seams including bending or as in covering to door shutters complete all as specified and directed. | 2 | Sqm | 900 ₹1,800 Lowest | 1,000 ₹2,000 | 1,000 ₹2,000 |
| 10.00 | S&F Galvanised. 2 strand, steel barbed wire 2.24mm dia barbed with 2mm dia barbs at 75mm spacings and straining and fixing to any type of standard rails strain- ing bolts, including, securing or tying at crossings with and provision of galvanised mild steel wire, staples or steel pins, etc. as directed (each line wire to be measured) | 5 | 100 RM | 1,300 ₹6,500 Lowest | 1,340 ₹6,700 | 4,000 ₹20,000 |
Tender Value
₹44.6 L
EMD Value
₹89,200
Closing Date
11 Aug 2025, 6:00 pmClosed
BRIJ BIHARI
LAKEVIEW CAMP MIL STN TALBEHAT 284125
PROVN OF SOLID WASTE PROCESSING MACHINERY FOR ORGANIC WASTE DISPOSAL UNDER AGE (I) TALBEHAT AT TALBEHAT MIL STN
2025_MES_719875_1
AGE(I)/TBT/TOK-47 OF 2025-26
Open Tender
Solid Waste Management
Item Rate
180 days
AGE (I) TALBEHAT
9 documents required · 9 mandatory
₹5
AGE (I) TALBEHAT
₹89,200
Yes
19 Nov 2025
11 Jul 2025
13 Aug 2025
15 Jul 2025
11 Aug 2025
22 Jul 2025
stage.html
html • 0.05 MB
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .