Strengthening and Widening of Road from Ambafala Titradi (Gupteshwar Mahadev Temple Gate) to Kaladwas RICCO Industrial Area Road Via Six Lane. 5701

Item Code [ PWD BSR 2025 2.2]:Item Type [road] :: Sub Item Code [ PWD BSR 2025 2.2 + 2.2 (II)]: Clearing and grubbing road land including up rooting wild vegetation, grass, bushes, shrubs, saplings and trees of girth upto 300mm, removal of stumps of such trees cut earlier and disposal of unserviceable materials and stacking of serviceable material to be used or auctioned,upto a lead of 1000 m including removal and disposal of toporganic soil not exceeding 150mm in thickness as per MoRTH Specification Clause 201. By Mechanical Means In area of non-thorny jungle

Item Code [ Rd 2025 3.9.2 Excavation in Hard Rock ]:Item Type [road] :: Sub Item Code [ Rd 2025 3.9.2 Excavation in Hard Rock + 3.9.2-B]: Excavation for roadway in hard rock (blasting prohibited) with rock breakers including breaking rock, loading in tippers and disposal with a lift upto 1.5 m and lead upto 1000 metres, trimming bottom and side slopes in accordance with requirements of lines, grades and cross sections as per MoRTH Specification Clause 301.3. Mechanical Means

Item Code [ Rd-2025 scarifying 3.2]:Item Type [road] :: Scarifying Existing Bituminous Surface to a Depth of 150 mm by Mechanical Means Scarifying the existing bituminous road surface to a depth of 150 mm and disposal of scarified material with a lift upto 3 m and lead upto 1000 m as per MoRTH Specification Clause 305.4.

Item Code [2023 17.29.4]:Item Type [RUIDP] :: Providing, lowering, laying, aligning, fixing in position and jointing at all level/ depths full round HDPE DWC (double wall corrugated) pipes of SN8 grade as per IS 16098 (Part 2) amended upto date in trenches in complete including all material, labour, sectional hydro testing (including the cost and conveyance of water to site for testing) and commissioning as per Technical Specifications, drawings and as per direction of Engineer. Note : E/w to be measured and paid separately. Length of pipe shall be measured in between the outer wall of two manholes / Inspection chambers. Pipe in the manhole/inspection chamber’s wall shall deemed to be included in the item of manhole/inspection chamber shall not be payable. 300 mm ID

Item Code [2025 10.2 A]:Item Type [road] :: Sub Item Code [2025 10.2 A + (i)]: Providing and fixing of retro-reflectorised cautionary , mandatory and informatory sign as per IRC:67 made of encapsulated lens type reflective sheeting vide Clause 801.3.1fixed over aluminium sheeting, 1.5mm thick supported on a mild steel angle iron post 75 mm x 75 mm x 6mm firmly fixed to the ground by means of properly designed foundation with M15 grade cement concrete 450 mmx 450 mmx 600mm, 600mm below ground level as per drawings and MoRTH Specification Clause 801 900 mm equilateral triangle

Item Code [2025 11.4]:Item Type [road] :: Sub Item Code [2025 11.4 + I(i)]: Providing concrete for plain/reinforced concrete in open foundations complete as per drawings and MoRTH specifications Clause 1702, 1703, 2102 & 2104 P.C.C grade M 10 Nominal mix 1:3:6

Item Code [2025 3.3]:Item Type [road] :: Construction of embankment with approved materials deposited at site obtained from roadway cutting and excavation from drain and foundation or other structures graded and compacted to meet requirement of Tables 300-1 and 300-2 as per MoRTH Specification Clause 305.3

Item Code [2025 3.8 (iii)]:Item Type [road] :: Excavation for roadway in ordinary rock with hydraulic excavator of 0.9 cum bucket capacity including cutting and loading in tippers, transporting to embankment site with a lift upto 1.5 m and lead upto 1000 m, trimming bottom and side slopes in accordance with requirements of lines, grades and cross-sections as per MoRTH Specification Clause 301.3.5

Item Code [2025 4.2 ]:Item Type [road] :: Sub Item Code [2025 4.2 + (iii)]: Granular Sub-Base with Close Graded Material (Table:- 400-1) Plant Mix Method Providing laying spreading and compacting specified graded sand, gravel (crushed stone) as per Table 400-1, 400-2 or any other course material as per design mix, as per CBR in subbase course including premixing the material at OMC in wet mix plant, carriage of mixed material spreading in uniform layers with motor grader F. E loader on a prepared base and compacting with vibratory roller to achieve desired density (as per I.S.2720) including all material, labor, machinery, lighting guarding, barricading and maintenance of diversion complete. [MoRTH specification : Clause 401]. By mechanical means. For Grading-III Material

Item Code [2025 5.2 i]:Item Type [road] :: Providing and applying tack coat with Bitumen emulsion (RS-1) using emulsion distributor at the rate of 0.20 to 0.30 kg per sqm on the prepared bituminous surface cleaned with Hydraulic broom as per MoRTH Specification Clause 503.