ADDN/ALTN TO ROOF WITH CONNECTED WKS IN PARKING SHED BEHIND BLDG NO. P-1, TOILET AND DUCT AREA OF BLDG NO. P-192 (NEW COMD BLDG), GF CORRIDOR AND CONNECTED SERVICES IN BLDG NO.SM-17, PROVN OF WALL TILING WITH CONNECTED WKS BASEMENT OF CORRIDOR IN NE

Amount

Demolition of cement concrete (un-reinforced) of any description and in any position not otherwise specifically provided for complete all as specified and directed.

Demolition of brick work built in cement mortar including all quoins, arches, pillars etc all as specified and as directed by the Engineer-in-Charge.

Dismantling of floor, hearth or wall tiling incl cement mortar bedding (but not backing) removing tiles from site and rubbish off the premises complete all as specified and directed.

Taking down cement plaster from brick or concrete surfaces of any description including racking out joints, hacking for key, scrubbing down with water etc complete all as directed.

Taking down, easing and adjusting aluminium shutters / partitions including rubber neoprene packing complete of in any description exc 1.00 Sqm, but n exc 2.00 Sqm each and refixing in same opening, complete all as specified and directed.

Taking down aluminium frame with shutters including rubber neoprene packing complete of in any description n exc 1.50 Sqm each, complete all as specified and directed.

M&L Brick Work with fly-ash Bricks (with Old Size Bricks), Straight or Curved on Plan exc. 6.0 Metre mean Radius, built in Cement Mortar 1:6, complete all as specified and as directed.

M&L Brick Work with fly-ash Bricks Half-Brick thick, Old Size, built in Cement Mortar 1:4, Straight or Curved on Plan to any Radius, complete all as specified and as directed.

M&L for rendering 15 mm thick built in cement mortar (1:4) on fair faces of brick work or concrete surfaces finished even & smooth (without using extra cement) and mixed with water proofing compound as per manufacturer's instruction complete all as specified and directed. (NOTE : Water proofing compound shall be measured and paid separately).

Supply only liquid water proofing compound all as specified and as directed.

M&L for 15mm thick rendering on fair faces of brick work or concrete surfaces in cement mortar 1:6 finished rendering surfaces even and smooth without using extra cement complete all as specified and directed.

M&L for PCC (1:5:10) type E-2 (using 40mm graded crushed stone aggregate) as in fillings as mass concrete, complete all as specified and directed.

M&L for providing two coats of acrylic reinforced cementitious waterproof coating to prevent leakage/ seepage through sunken floor over prepared surfaces as per manufacturer's instructions complete all as specified and directed. (MAKE: Master Seal 550 or equivalent in other makes specified in tender)

M&L for plain cement concrete (1:2:4) type B1 using 20 mm graded aggregates in lintels upto 1.5 m clear span, cills, steps, seismic and other similar bands, plinth courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones , bed plates, kerbs, water troughs and the like including weathering, slightly rounded or chamfered angles and throating including formwork complete all as specified and directed.

M&L for providing precast reinforced cement concrete 1:2:4 type B1 using 20mm graded stone aggregate for cover slab set in cement mortar 1:6 including necessary form work complete all as specified and directed.

M&L for 25 mm thick plain cement concrete (1:2:4) type B-0 (using 12.50mm graded stone aggregate) as in sub base floors, finished even and fair to receive tiles, complete all as specified and directed.

M & L for heavy duty coloured ceramic floor tiles of size 300 x 300 x10mm thick in floor etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade complete including 20mm thick screed bed in cement mortar 1:6 complete all as specified and directed. (MAKE : JOHNSON, Model : ENDURA or equivalent model in other makes listed in the tender)

S&F Non-skid ceramic coloured tiles (square/ rectangular), 7 to 8 mm thick, area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, set and jointed in neat cement slurry in floors and pointed in white or coloured cement to match the shade of tiles, laid over and including 15mm thick screed bed or bedding layer in cement mortar 1:6 complete all as specified and directed.

All as per item No 18 but here-in-before non-skid digital ceramic coloured floor tiles (square/rectangular, 7 to 8 mm thick, area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm

All as per item No.18 above, but in riser of steps, skirting, dados and pillers, laid over 10 mm thick cement plaster in cement mortar 1:4 and jointed etc complete all as specified and directed.

M&L for glazed coloured ceramic tiles in vertical surface 300 X 450 X 7 mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match the colour of tiles, laid over and including 10mm thick screed bed in cement mortar 1:3 complete all as specified and directed.

M&L granite (of any type) work, 18-20 mm thick (table rubbed and polished) in steps, jambs, pillars, window cills, cooking platforms, urinal partition and like in cement mortar 1:4 including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite and making moulds on edges laid over and including 20 mm thick screed bed in cement mortar 1:4 complete all as specified and directed.

M&L for providing edge moulding to 18-20mm thick Granite stone of any description od counter vanities etc., including machine polishing to edge to give high gloss finish, complete all as specified and directed.

S&F Cast iron work grade FG -150 unmachined in brackets, gratings, railing, frames, manhole covers and similar articles exc 5 Kg each complete all as specified and as directed.

Dismantling Asbestos cement (corrugated, semi-corrugated etc.,) roof sheets as in roof coverings including AC ridge complete all as specified and as directed.

Dismantling plain or corrugated steel sheeting, in any gauge and in any thickness roof sheets as in roof coverings including complete all as specified and as directed.

S&F 0.50 mm thick TCT (total coated thickness) pre-coloured galvalume sheets with minimum base metal thickness of 0.45 mm, single skin high rib/multi rib profile galvalume sheeting having 1000-1020 mm width and 28-30 mm high crest @ maximum 250-255 mm pitch (centre) with sheets manufactured out of 0.50 mm this TCT (total coated thickness) high tensile galvalume sheets having tensile strength 550 MPA with 18-20 micron top coat over 5 micron primer and 8-10 micron alkyld backer zinc aluminium alloy AZ-150, sheets having a dip metallic zinc (43.5%0 aluminium (55%) & silicon (1.5%) with total mass coating of 150 gms/sqm on both sides, having wide pans with minimum 3 small stiffening ribs for effective water shedding and special male/female ends with full return legs on laps for purlin support and fixed as per existing profile of roof covering / cladding to walls, complete all as specified and directed.

S&F 0.80 mm thick, Plain, Galvanised mild steel sheeting as in ridges, hips, valley gutter, drip and straight flashing (length and girth as fixed) for hangars etc., complete all as specified and directed.

S&F for Framed work such as grills, gratings etc, with ends of bars shouldered and/or riveted, or forget into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe 410-0 or Fe 310-0, and for portions framed and hung as gates, including pintle hinges, stops, hand-made sliding bolts, etc. All as specified and directed.

Dismantling wrought iron or mild steel work of any description in rafters, purlins and wind ties etc complete all as specified and directed.

M&L for structural steel work Fe 410-W (Gde-E-250) quality-A in roof trusses (framed), trussed, purlins, crane gantries, rials and fastenings and heavy bracket framing (beam, tee, angle, channel or flat sections) including distance pieces, cleats etc. complete all as specified and as directed by the Engineer-in-Charge. (NOTE: Quoted rates shall be deemed to include for cutting to dead length where required, notching, drilling, fitting, riveting and/or welding or connecting with bolts and nuts (including rivets or bolts and nuts), providing and fitting angle cleats, fish plates, gusset plates etc., also for wedging, plumbing, truing up and fixing complete)

Supply and fixing mild steel wind ties for roof including securing bolts or rivetting etc., and similar work confirming to Fe 290 Gde E-165, complete all as specified and directed. (NOTE: Measurement shall be taken for the MS flat only. Quoted rate is deemed to include for the cost of securing bolts etc)

M&L for welded steel fabric weight n exc 4 Ks per Sqm, fixed to steel members complete all as specified and directed.

M&L Preparing old decorated surfaces of Ceiling and applying two coat of white wash, complete all as specified and as directed.

M&L for preparation of new plastered surfaces of walls and applying three coats of white wash all as specified and as directed.

M&L for complete removal of existing treatment on walls and applying three coats of white wash all as specified and as directed.

M&L for applying one coat of acrylic distemper on old decorated surfaces of walls including preparation of surface (by brooming down or steel wire brushing, scrapping down smoke, soot, moulds, moss, efflorescent salts, trading oil and greasy spots) complete all as specified and directed.

M&L for preparation of new plastered surfaces of walls and applying two coats of cement base paint over a coat of alkali resistant primer, complete all as specified and directed.

M&L for complete removal of existing treatment of walls and applying two coats of cement base paint over a coat of alkali resistant primer, complete all as specified and directed.

M&L Preparing new Steel or Iron Surfaces of any description, over 10 Cm width or girth and applying Two Coats of Synthetic Enamel Paint (First quality) over a coat of Red Oxide/ Zinc Chrome Primer, complete all as specified and as directed.

M & L for applying two coats of Synthetic Enamel Paint (First quality) over a coat of red oxide primer on steel surfaces not exc 10 cm width or girth including preparation of surfaces complete all as specified and as directed.

M&L for preparation of old painted steel surfaces exc 10 cm width or girth and applying two coats of synthetic enamel paint (First quality) complete all as specified and directed.

Roughening surfaces of old concrete floor by picking, sweeping clean and washing down with water to remove dust, etc., complete all as specified and directed.

M&L False ceiling with 'E' board "Classic", reinforced, designer series, board with HPSC of size 600 mm x 600 mm x 4 mm thick fixed on aluminium snap grid to support the boards/files with aluminium anodised main 'T' section 36mm x 25mm x 1.40mm cross tee 23.50mm x 23.50mm x 1.40mm thick and aluminium angle 25mm x 25mm x 1.40mm as on edges/sides, fixed to ceiling with hangers 6mm dia GI (upto 1200mm length) adjusting level fixed to roof slabs by means of ceiling cleats made out of GI flat 40 x 3mm size 60mm long and expansion hold fasteners 12.5mm dia, 40mm long and applying two coats of oil emulsion distemper over a coat of primer on ceiling boards, with and including dismantling of old existing ceiling complete all as specified and as directed. (NOTE: Quoted rate shall be deemed to be inclusive of the cost of ceiling board)

S&F mild steel Collapsible steel gates, top hung, consisting of channel pickets, pivoted flat bars, top and bottom runners, brass handles etc., as specified, erected in position and securing runners with holdfasts and brackets, complete all as specified and directed.

M&L for mild steel TMT Bars 10 mm dia and over, cut to length, bent to shape required including cranking, bending spirally for hooping for columns, hooking ends and binding with and including Mild Steel Wire (annealed) not less than 0.90 mm or securing with clips, etc., complete all as specified and as directed.

M&L for preparation of new plastered surfaces of walls and applying 3 mm thick wall putty over plastered surfaces, finishing surfaces even and smooth and applying two coats of oil emulsion distemper over a coat of alkali resistant primer as per manufacturer's instructions complete all as specified and directed.

M&L for preparation of new plastered surfaces of walls and applying 2 mm thick wall putty over plastered surfaces, finishing surfaces even and smooth and applying two coats of oil emulsion distemper over a coat of alkali resistant primer as per manufacturer's instructions complete all as specified and directed.

All as per item No.48 above, but on Ceilings

M&L for preparation of old decorated surfaces of walls and applying one coat of oil emulsion distemper over a coat of alkali resistant primer as per manufacturer's instructions complete all as specified and directed.

All as per item No.50 above, but on Ceilings

M&L for preparation of old decorated surfaces and applying one coat of exterior acrylic emulsion weather proof paint to old decorated surfaces of walls of any description, over 10cm width or girth not otherwise described (as per manufacturer's instructions) complete all as specified and as directed.

S&F rolled mild steel Plates (plain or chequered) channels, square cut or notched (ordinary and counter sunk) forming holes, without any attachment confirming to FE-410-W (Gde E-250) complete all as specified and directed.

M&L 75 mm thick PCC (1:3:6) type C-2 (using 40mm graded crushed stone aggregate) as in plinth protection, finished even and smooth without using extra cement as directed by the Engr-in-Charge.

M&L for Anodized aluminium frame for doors, windows, ventilators and partition with one or more rebate including joining cleat for fixing etc complete all as specified and directed.

M&L for anodised aluminium door shutters, aluminium section weighing 0.55 Kg/m including necessary joining cleats, glazing clips, rubber neoprene packing, handles 2 Nos in each door, hinges, anodised aluminium snap beading, screws etc complete all as specified and directed. (NOTE: Glass shall be measured and paid separately)

S&F 4.8 mm thick sheet glass frosted on one side, area in squares exc 0.5 sqm in each pane and glazing with rubber gasket fixed to aluminium frame work / snap beading complete all as specified and as directed by the Engineer-in-Charge

Taking up or down steel water tubing 15 mm bore incl connection, cleaning etc., for refixing or removal to store, complete all as specified and directed.

All as per item No 58 here-in-before, but 20 mm bore

S&F tubes 15mm bore "medium grade" galvanised with all fittings such as union, angle, tee, socket etc., and fixed complete to wall and ceiling or laid in floors.

All as per item No 60 here-in-before, but 20 mm bore

Supply and fix 20mm bore gun metal gate or globe valve, with iron wheel head, screwed both ends for iron pipe, complete all as specified and directed.

Dismantling of old 100 mm bore cast iron (sand cast) soil, waste or RCC drain pipes, jointed in cement mortar and taking out from trenches, if required, complete all as specified and as directed.

Supply and fix 100 mm bore cast iron (sand cast) soil, waste and vent pipes, in any length with or without ears, with cement joints, fixed to walls, complete all as specified and as directed.

Supply and fix 100 mm bore cast iron (sand cast) soil, waste and vent pipes, in any length with or without ears, with cement joints, laid in trenches or in floors, complete all as specified and as directed. (Note : Earthwork to be measured and paid separately).

S&F CI bend (any radius), diminishing pieces or tapers (larger bore measured) for 100 mm bore pipe complete all as specified and directed.

S & F 100 mm bore cast iron (sand cast) bends with access door (any radius), diminishing pieces or tapers (larger bore to be measured) complete all as specified and as directed by the Engineer-in-Charge.

S&F CI (sand cast) Branch pieces, single (any radius, equal or unequal) for 100 mm bore pipe for any building height complete all as specified and directed.

S&F CI (sand cast) Branch pieces with ovel access door, single (any radius, equal or unequal) for 100 mm bore pipe for any building height complete all as specified and directed.

S&F CI (sand cast) sanitary connection socket to fit WC outlet for 100 mm bore pipe, complete all as specified and directed.

M&L for 100 mm dia cast iron floor trap with grating including jointing to waste pipe fixed in cement concrete type B1(1:2:4) complete all as specified and directed.

S&F mild steel stack clamps, fabricated out of 50 x 5 mm flat iron and 16 mm dia round iron stay, including suitable size bolts and nuts and securing ends of stays to wall or roof for 100 mm dia pipes including painting with two coats of synthetic enamel paint over coat of red oxide primer, complete all as specified and directed.

S&F Vitreous China (coloured) wash down water closet pan (pedestal pattern) with 'P' or 'S' trap front or back inlet, fixing bolts (except flushing cistern and flush pipe) incl plastic water closet seat cover (white) and mild steel chromium plated or aluminium hinging device, as in repairs, complete all as specified and directed. (Make : Parryware, Model : Elite / JAQUAR, Model: Continental / CERA, Model: Conventional / HINDWARE, Model: SLICK)

S&F Plastic seat & cover, white, soft close type, for coupled water closet (of any description) incl chromium plated hinge, as in repairs, complete all as specified and directed. (Make : PARRYWARE, Cat No: E8300 or equivalent model in JAQUAR / CERA / HINDWARE / PRAYAG)

S&F White PVC Flushing Cistern 10 Litre capacity, Low Level Valve Less, Symphonic Action type with Inlet, Ball Valve, Float, flush pipe and Handle including Cutting and pinning in Ends, making good disturbed Surfaces in Cement Mortar 1:3 and fixed including taking down/out unserviceable Flushing Cistern and connected items complete all as specified and directed. (MAKE : PARRYWARE, Model : Slim line Economy / HINDWARE, Model : Sleek Plus / CERA, Model : Corona / PRAYAG, Model: SMART or equivalent model in COMMANDER )

Supply and fix Low density polyethylene pipe connection, comprising of 15 mm dia 450 mm long having PTMT union at each end of connection to each of pillar tap/cistern/stop cock/urinal etc. at one end, stop cock at other end, as in repairs, complete all as specified and directed. (MAKE : PRAYAG, Cat No. 323 / POLYTUF, Cat No. 4003 or equivalent model in SHAKTI / JEXON)

S&F Vitreous China Wash Hand Basin 550x400mm in size, White (Flat Back or Angle Back Type) and making all necessary connections, making good disturbed Surfaces in Cement Mortar 1:3, including taking down/out unserviceable Wash Hand Basin and connected Items, complete all as specified and as directed. (Make of WHB : PARRYWARE, Cat No. C0406 / HINDWARE, Cat No. 10010 / JAQUAR, Cat No. CNS-WHT-801 / CERA, Cat No: S2040141) NOTE: Waste pipe and coupling shall be measured separately

S&F Vitreous china, white, full stall urinal flat back with grating and union for discharge pipe (excl flush pipe and flushing cistern and waste pipe) complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement; fixing flush pipe, grating and Union for discharge pipe complete all as specified and directed. (Make of Urinal : CERA, Model: CAPRIANA / HINDWARE, Model: FLAT BACK LARGE / Jaquar, Cat No: URS-WHT-13261/PARRYWAYR, Model: New Magnum)

S&F Tubular towel rail (normal range), 20mm dia, 600 mm long between flanges including brass chromium plated, as in repairs, complete all as specified and directed. (MAKE : Essco, Cat No : AEC-1111 / PRAYAG, CaT No: BA-40 / ESS ESS, Cat No : AC-701 / SOMANY, Model: ETHER)

S&F Chromium plated brass self closing pillar tap (premium quality), fancy type. with aerator, fixed to wash hand basin, as in repairs, complete all as specified and directed. (Make : JAQUAR, Cat No: OPP-15001PM / CERA, Cat No: F1005101/ ASIAN PAINTS, Cat No: SRPC101 / HINDWARE, Cat No: F360001 / PRAYAG, Cat No: 8102 or equivalent model in PARRYWARE)

S&F Chromium plated brass Bib cock with wall flange, fancy type, long body, fixed to 15 mm bore of Iron pipe, as in repairs, complete all as specified and directed. (Make : JAQUAR, Cat No: CON-107KN/ PARRYWARE, Cat No: G1405A1 / CERA, Model : OCEAN / PRAYAG, Cat No: 9208 /HINDWARE, Cat No: F330041)

S&F 38/40 mm bore PVC corrugated waste pipe, 800 mm long for Urinals complete all as specified and directed. (Make: PRAYAG, Cat No: 328 or equivalent make as approved by GE)

S&F 32 mm bore PVC corrugated waste pipe, 800 mm long for wash hand basins complete all as specified and directed. (Make: PRAYAG, Cat No: 327 or equivalent make as approved by GE)

S&F 5.5mm thick looking mirror of size 450mmx600mm over AC building board or commercial ply wood and fixed with PVC/wooden plugs with CP brass screws and cup washer complete all as specified and directed.

S&F 15mm dia soap dish, chromium plated body, as in repairs, complete all as specified and directed. (Make : PRAYAG, Cat No: BA-05 / CERA, Cat No: F5003106 / ESS ESS, Cat No : AC-503B / PARRYWARE, Cat No: T6902A1)

S&F Toilet paper holder, surface type with flap incl taking down existing holder complete all as specified and directed. (Make : JAQUAR, Cat No : CAN-1153N / CERA, Cat No: F5007110 / PRAYAG, Cat No: BA-38 / ESS ESS, Cat No: AC-506 / HINDWARE, Cat No: F880003)

S&F Chromium plated brass Angular stop cock (premium quality), concealed type with wall flange fixed to 15 mm bore of Iron pipe, as in repairs, complete all as specified and directed. (Make : PARRYWARE, Cat No: G4807A1 / JAQUAR, Cat No: FUS-29053 / CERA, Cat No: F1015361 / ASIAN PAINTS, ALAC101 / HINDWARE, Cat No: F360006 / PRAYAG, Cat No: 9010)

S&F Chromium plated Hand shower (health faucet), brass body with 1.2 metre long flexible tube in chrome finish with wall hook, as in repairs, complete all as specified and directed. (MAKE : JAQUAR, Cat No : ALD-573/ PARRYWARE, Cat No : T9941A1 / ESS ESS, Cat No: C-232D / CERA, Cat No: F8030301 / HINDWARE, Cat No: F160002)

S&F Stainless steel grating of size 102 mm dia with waste hole, complete all as specified and directed. (Make : PRAYAG, Cat No: FT-04 or equivalent in other makes specified in tender)

S&F Vitreous china wall mounted coupled closet (Pedestal pattern), white, including low level vitreous china valveless symphonic action type flushing cistern with inlet ball valve float, push button, flush pipe incl bracket, P/S trap, PVC white soft close seat cover and connecting fittings, as in repairs, complete all as specified and directed. (Make :CERA, Model : CLAIR / PARRYWARE, Model: CASCADE NXT / JAQUAR, Model: FLORENTINE / HINDWARE, Model: CONSTELLATION)

S&F 15mm bore chromium plated two way bib cock with flange (premium quality), fancy type, as in repairs, complete all as specified and as directed. (Make : JAQUAR, Cat No: FUS-29041 / CERA, Cat No: F1015163/ ASIAN PAINTS, Cat No: ALBC102 / PRAYAG, Cat No: 9311-N/HINDWARE, CAT No: F360005 or equivalent model in PARRYWARE, Cat No: G4834A1)

S&F 15mm bore Swan neck pillar cock chromium plated cast copper alloy with round spout, sink mounted type, screwed for iron pipe etc., as in repairs, complete all as directed (MAKE :PARRYWARE, Cat No : G4803A1 / CERA, Cat No: F1003104 / PRAYAG, Cat No : 9014/ HINDWARE, Cat No: F280012 / ESS ESS, Cat No: PT-19 / JAQUAR, Cat No: SOL-6357)

S&F Tubular towel ring brass chromium plated (premium quality), as in repairs, complete all as specified and directed. (MAKE : JAQUAR, Cat No : ACN-1121BN / PARRYWARE, Cat No : T6002A1 / ESS ESS, Cat No: AC-502 / PRAYAG, Cat No: BA-11)

S&F 15mm bore auto closing concealed urinal flush valve with wall flange, fancy type, chromium plated including all accessories, as in repairs, complete all as specified and directed. (MAKE : JAQUAR, Cat No : PRS-073 / PARRYWARE, Cat No : G2030A1 or equivalent modal in CERA/ HINDWARE / PRAYAG)

Cutting openings, through brick walls built in cement mortar for door, window and other openings or enlarging existing openings, countering window into door openings etc., or cutting out defective brick work for under pinning including providing, fixing and removing shoring, cleaning and stacking bricks, removing surplus serviceable bricks, hard core etc., to store and rubbish out exc 50m, complete all as specified and directed.

Forming jamps etc., to openings (to foregoing item) including cutting, toothing and properly bonding into old work, also facing jointing and pointing to match existing work in cement mortar (1:4), complete all as specified and directed.

Making good under cills or over arches, lintels and bressummers, including all pinning when necessary in cement mortar (1:4), complete all as specified and directed.

Taking down shutters of any description exc 1.00 sqm but n.exc 2.00 Sqm each and removing from the site, all as directed.

M&L for pressed steel door frame of size 105 mm x 60 mm for door with one or more rebates including necessary fixing lugs, hinges, lock stick plate etc., complete all as specified and directed.

M&L for Factory made solid PVC moulded door shutter, 28 to 30 m thick(stiles) with 2,4 or 6 raised panel design with 2 mm thick moulded PVC sheet on the front face & 2 mm plain colour PVC sheet on back face with particle board core complete all as specified and directed.

Supply & fixing 100 mm mild steel butt hinges(medium weight) cold rolled complete all as specified and directed.

S&F 150 mm aluminium anodised, barrel tower bolts of extruded section and fixed complete all as specified and directed.

S&F aluminium handle, cast type anodised 150 mm size complete all as specified and directed.

S&F 250 mm aluminium, anodised sliding door bolt with hasp, staple(bolt type) and fixing clip of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded section or cast aluminium alloy complete all as specified and directed.

Supply and fixing 110mm bore PVC (SWR) pipes, single socketed, in any length, with rubber ring joints, fixed to wall all as specified and as directed by the Engineer-in-Charge.

Supply and Fixing 110 mm PVC (SWR) Bend any radius complete all as specified and as directed by the Engineer-in-charge.

ARJUN DAS VALECHA

DEB AND COMPANY

S.K. TRADERS

DEEPAK KHATTAR