SPECIAL REPAIR TO BLDG NO T-80 (OTM ACCN) OF THE GRENADIERS RC AND SPL REPAIR TO BLDG NO T-32 (COOK HOUSE), 54 COY ASC SUP AND CERTAIN MINOR WORKS IN THE AREA OF AGE B/R-II UNDER GE (W) JABALPUR

Amount

Demolition of concrete in ground floors and paving n.exc 15 cm thickness(below or above ground level) complete all as specified and as directed.

Dismantling floor hearth or wall tiling including cement mortar bedding (but not backing) remaining serviceable tiles to stores and rubish off the premises complete all as specified and as directed.

Dismantling of Stone slabs and tiles of any description or thickness in floors, aprons etc complete all as specified and as directed.

M & L Machine cut Kota stone slab flooring 20-25 mm thick over and including cement screed base 20-25mm thick in cm 1:4 laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and mirror polishing complete all as specified and as directed.

M & L Kota stone slab 20-25 mm thick in riser of steps, skirting, dado and pillar laid over cement screed and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and mirror polishing over and including 10mm thick rendering in cement mortar 1:4 , on fair faces of brick work or concrete surfaces as backing complete all as specified and as directed.

M & L Non Skid ceramic joint free tiles 7 to 8 mm thick ( square / rectangular) area of each tile exceeding 0.11 Sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over 15 mm thick screed bed or bedding layer of mortar with CM 1:4 complete all as specified and directed.

M & L Non skid ceramic coloured tiles 7 to 8mm thick (square/rectangular) area of each tile exc 0.11 Sqm but not exc. 0.18 Sqm ,as in skirting, dados etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 10mm thick plastering with CM 1:4 complete all as specified and as directed.

M&L for glazed ceramic tiles colour 350x250x7mm / 450x350x7mm thick in vertical surfaces such as skirting, dado and risers to steps set and jointed in neat cement slurry and pointed in coloured cement to match over 10mm thick cement mortar 1:4 on fair faces of brick work or concrete surfaces as backing for tiles complete all as specified and as directed.

M & L providing, cement concrete type B1 1:2:4 (20 mm graded aggregatet)t in roof kerbs or mud stops, rounded or chamfered on edges complete all as specified and as directed.

M & L 75mm th PCC 1:3:6 type C-1 using 20mm graded stone aggregate as in plinth protection finished even and smooth without using extra cement complete all as specified.

Taking down cement or cement lime plaster, any description on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water, etc complete all as specified and as directed.

M&L for applying 2mm thick wall care Putty in two layers with two coats of oil bound distemper including primer on old surfaces including complete removal of existing wall finish of any type with wire brush, brooming, dusting and finally washing with water to clean the surface absolutely free from any kind of foreign materials and making good minor cracks etc. and surfaces absolutely even and smooth, rubbing with sand paper complete all as specified and as directed.

M & L preparation of walls old plastered surfaces & applying two coats of cement based paint complete all as specified and as directed.

Demolition of brick work or stone builder masonry built in cement mortar complete all as specified and as directed.

M&L for Brick work with sub class 'B' bircks straight or curved on plan exc 6mtr mean radius in CM 1:6 complete all as specified and as directed.

Ditto as per item above but except brick work.

M & L preparation of new steel surfaces of any description over 10 cm width or girth & applying two coats of synthetic enamel paint over a coat of primer complete all as specified and as directed.

M & L preparation of old steel surfaces of any description over 10 cm width or girth & applying two coats of synthetic enamel paint complete all as specified and as directed.

M & L preparation of old wooden surfacesof any description over 10 cm width or girth & applying two coat of synthetic enamel paint complete all as specified and as directed.

Taking down Chowkats or frames not exc. 1.5 sq. m each with shutters (without taking off shutters from the frame) complete all as specified and as directed.

Taking down Chowkats or frames exc. 1.5 sq. m but n exc 4 Sqm each with shutters (without taking off shutters from the frame) complete all as specified and as directed.

S&F steel windows with side hung shutters incl box type hinges with steel handle, and steel peg stay complete with glazing bars, dovetailed or welded including making good to the disturbed surfaces complete all as specified and directed

S&F steel windows with side hung shutters factory made incl box type hinges with steel handle, and steel peg stay complete without glazing bars, dovetailed or welded including making good to the disturbed surfaces complete all as specified and as directed.

S&F steel ventilator with top hung shutter including hinges steel peg stay complete all as specified and as directed.

S&F galvanised MS wire cloth, 0.56mm nominal dia of wire average width of aperture 1.18mm and fixed with tinned tacks, or galvanised wire staples complete all as specified and as directed.

S&F 3mm thick sheet glass ordinary quality and galzing with oil putty or wooden beads in squares of any size complete all as specified and directed by Engr-in-charge.

M&L 20 mm thick granite stone slab of any type with table rubbed and polished in cooking platforms,window sill and like set in cement mortar 1:4 including pointing in white cement (1:2) using marble dust with admixture of pigment to match the shade of granite slab complete all as specified and directed.

M&L Cudappah stone slab on cooking platform/shelf 20-25mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match over and including 20mm thick screed bed in CM 1:6, the shade of the slab including rubbing and polishing and cutting of holes for gas pipe complete all as specified and as directed.

S & F Framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165 complete all as specified and as directed.

Dismantling of walll and ceilling boards (fibre,pulp,insulation,etc) or insulation boards/slabs/bblankets, any thickness including cover fillets complete all as specified and as directed.

M&L for suspended false ceiling system using chicago metallic (E grid)exposed supended system, grid section size 600mm X 600mm comprising of GI powder coated Main Runner of dimensions 39 mm X 24mm X 0.8mm thick (thickness comprising of GI/0.4+ PPPCGS/0.3mm & weight of runner 1.35 kg for 3600mm length) Cross Tee of dimensions 29mm X24mmX0.8mm thick and thick wall angle 22.2mmX22.2mmX 0.65 mm thick ( thickness comprising of GI/0.35+ PPPCGS/0.3mm & weight of angle 0.70 kg for 3050mm length)with and including 4mm thick HPSC(High pressure steam cured) pre-primed , self embossed . textured designer board, water resistant termite resistant , fire resistant for insulation and acoustic purpose to be placed in the grid system duly suspended with 4mm dia GI bar hangers fixed with steel dash through fasteners from purlins of the roof with butterfly clips(Wt-0.007 Kg/clip)hold down clips (Wt-0.0035 Kg/clip) with Provn of light fixture complete all as directed. Make :- EVEREST or other equivalent as approved.

S & F in repair for Pillar taps, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered ‘Hot' or ‘Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed, 15 mm fancy type fixed complete all as specified and as directed.

S & F for Wash basins, Vitreous China (flat back type) any size, including cutting for and pinning in ends of brackets or erecting stand etc. complete with all accessories complete all as specified and as directed.

S&F in repair for vitreous china full stall urinals,white, complete including providing and fixing plugs, securing urinals to plugs with and including 60mm long brass screws, fixing flush pipe, grating and union for discharge pipe complete all as specified and as directed.

Urinal spreader of PTMT any colour for fixing with 15 mm dia pipe. (Minimum weight 60 gms) complete all as specified and as directed.

S & F Factory made solid PVC door frame of size 50 mm x 47 mm made out of 5 mm plain colour PVC sheet reinforced with MS square tube manufactured as per SSR Part I specifications and drawing.

S & F Factory made solid panel PVC door shutter 30 mm thick (style) manufactured as per SSR Part I specifications and drawing. consisting of frame made out of MS tubes for top & Bottom rails. MS frames shall be covered with heat moulded plain colour PVC "C" channel having a PVC sheet strip of 20 mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail. Paneling of plain colour PVC sheet to be fitted in the MS frame welded/ sealed to the stiles & rails with suitable PVC sheet beading and joined together with solvent cement manufactured as per SSR Part I specifications and drawings.

M&L for pressed steel door frame size 125 mm x 60 mm and 1.25 mm thick including necessary fixing lugs, hinges, lock strike platee etc., including making good to the disturbed surfaces and matching existing treatment (cemnt base paint/distemper/white wash/plastic paint) etc complete all as specified and as directed.

S & F 35 mm thick 2nd class hardwood glazed and skeleton shutters, open rebated and prepared to receive glass, gauze etc (without sash bars) edges of framing plain chamfered or rounded fitted with cut and mitred beads for securing glass etc fitted to chowkhats for doors etc complete all as specified and as directed.

S & F factory made 35 mm thick plain, framed, panelled shutters (Two panels) with lock rail and panel of 9 mm thick BWP commercial ply or 12 mm thick veneered particle board with commercial veneering on both faces and size of the members of shutter are as per IS – 1003 (Part – I) made of kiln seasoned & chemically pressure treated 2nd class hardwood rail and style complete all as specified and directed.

S&F 100mm long aluminium butt hinges alloy with galvanised ms hinge pin, anofised and fixed type C-21 complete all as specified and as directed.

S&F 150mm long aluminium anodised barrel tower bolt and fixed complete all as specified and as directed.

S&F 125mm long aluminium anodised handle cast type and fixed complete all as specified and as directed.

S&F 300mm long Aluminium alloy, anodised,sliding door bolt with hasp,staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed

S&F, PVC (SWR) pipes 110mm bore single socketed, in any length with rubber ring joints, laid in trenches or in walls complete all as specified and as directed.

S&F, PVC (SWR) pipes 75mm bore single socketed, in any length with rubber ring joints, laid in trenches or in walls complete all as specified and as directed.

S&F PVC (SWR) bends ISI marked any radius of 110 mm bore with access door complete all as specified and directed.

S & F PVC (SWR) bends any radius, 75 mm bore complete all as specified and as directed.

PVC (SWR) 110mm bore 'T' equal or unequal complete all as specified and directed.

PVC (SWR) vent cowl for 110 mm bore pipe complete all as specified and as directed.

PVC (SWR) floor trap with grating 75 mm dia incl jointing with solvent cement complete all as specified and as directed.

Supply & laying of CPVC pipes 16 mm Outer dia, SDR 11 & Plain CPVC SDR 11 fitting on wall/ceiling or laying in floors complete all as specified and as directed.

Taking up or down steel tubing and connections, including cleaning for re-fixing of 15 mm dia complete all as specified and as directed.

Supply & laying of CPVC pipes 20 mm Outer dia, SDR 11 & Plain CPVC SDR 11 fitting on wall/ceiling or laying in floors complete complete all as specified and as directed.

Taking up or down steel tubing and connections, including cleaning for re-fixing or removal to store of 20 mm dia complete all as specified and as directed.

S&F PVC low level flushing cistern of capacity 10 litres complete with siphon handle lever float valve and PVC bend including connecting to ITWC/ ETWC and fixing on wall bracket complete all as specified and directed by Engr-in-charge complete all as specified and as directed.

S & F for vitreous China squatting pan, ‘Orissa’ pattern, size 580 x 440 mm white, with integral foot rests (excluding flushing cistern and flush pipe) fixed in repairs complete all as specified and as directed.

S&F in repair chromium plated shower rose fancy type fixed to 15mm bore pipe all as specified and directed by Engr-in-charge.

S&F rolled sections as in main and cross beams, hip and jack rafters; purlins where connected to a common rafters, fixed with angle cleats or other connecting plates of Gde fe 410-0 or fe 250-0 complete all as specified and as directed.

S&F PVC waste pipe size 32 mm flexible with coupling for WHB/Sink/Urinal etc complete all as specified and as directed.

S&F in repair 15mm bore bib tap cast copper alloy chromium plated with fancy type crutch or butterfly handels screwed down for iron pipes or for brass ferrule all as specified and directed by Engr-in-charge.

S & F in repair for Stop valves, cast copper alloy, chromium plated concealed type screwed down, high pre-ssure, with crutch or but-terfly handle, screwed both ends for iron pipe or for unions and fixed , 20 mm fixed complete all as specified and as directed.

S & F in repair for Sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long fixed complete all as specified and as directed.

S & F for PVC connections 15 mm size with PTMT nuts of length 600mm fixed complete all as specified.

Towel Rail 600mm long of PTMT/SS fixed with and including Chromium plated brass screws and wooden/plastic cleats .(Minimum weight 190gms) fixed complete all as specified and as directed.

S&F rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) capacity 1000 Ltr hoisted and fixed in position all as specified and directed by Engr-in-charge.

S & F in repair for Grating doom 100 mm dia of chromium plated (Minimum weight 25gms) fixed complete all as specified and as directed.

S & F in repair for Soap dish, any type, fixed to plugs with chromium plated brass screws fixed complete all as specified and directed.

S&F in repair Gun metal, globe or gate valve with iron wheel head, 20 mm bore, screwed both ends for iron pipe complete all as specified and as directed.

Excavation in trenches not exceeding 1.5m wide and not exceeding 1.5m depth for foundation etc or for shafts, wells cesspits manholes pier holes etc not exceeding 10 sqm on plan and not exceeding 1.5m depth in any type of soil etc complete all as specified and directed

M&L for PCC 1:4:8 type D2 using 20mm graded stone aggregate as in foundation filling and mass concrete complete all as specified and directed.

M&L for Cutting into existing manholes for connecting new drains, making good to pipe and rendering, cutting out existing benching for and forming branch channel (½ round or ¾ section) in cement concrete 1:2:4 type B-1 smooth finished ,and reforming benching as required for 150 mm internal dia of pipe complete all as specified and directed.

Demolition and breaking up drain pipes (Salt glazed ware, AC or Reinforced concrete) set in cement mortar complete all as specified and as directed.

M & L solid wall DWCP socketed drain pipes class SN-8, conforming to IS 16098 (Part-2) with 150 mm bore dia in 6m length including laying and jointing complete all as specified and as directed

M&L for cement concrete bed to drain pipes including packing under and haunching against the sides of pipe after they are laid & tested for 150 mm bore of pipe with cement concrete 1:4:8 type D-2 using 40mm graded stone aggregate complete all as specified and directed.

Supply only Expanaded metal in required size , weight n. exc 4 Kg /Sqm complete all as specified and as directed .

M&L for 75 mm thick as in sub base in CM 1:4:8 type D2(using 20 mm graded stone aggregate) complete all as specified and as directed.

M&L for Sand cushion under floors complete all as specified and as directed.

M&L for Machine pressed precast concrete interlocking paver block any shape and size with grey cement and pigment, confirming to IS 15658-2006of 60mm thickness M 35 Grade complete all as specified and as directed.

25 mm thick PCC 1:2:4 type B-1 (using 20 mm graded granite stone aggregate) in sub base of floorings to receive top finish complete all as specified and as directed.

M & L Non skid ceramic coloured tiles 7 to 8mm thick (square/rectangular) area of each tile exc 0.18 Sqm but not exc. 0.38 Sqm , in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15mm thick screed bed or bedding layer with CM 1:4 complete all as specified and as directed.

All as per above item but as in skirting with rendering 10mm thick CM 1:4 complete all as specified and as directed.

Supply only Integral Water proofing compound complete all as specified and as directed.

M & L preparation of walls old plastered surfaces & applying two coats of white wash complete all as specified and as directed.

M & L preparation of new wooden surfacesof any description over 10 cm width or girth & applying two coat of synthetic enamel paint over a coat of pink primer complete all as specified and as directed.

S&F Butt hinges medium weight cold rolled mild steel 125mm long complete all as specified and as directed.

S&F 3 mm thick figured glass, pin head type and glazing with oil putty in squares n exc 0.5 sqm in each pane complete all as specified and as directed.

M&L for complete removal of existing water proofing treatment from top of roof and canopies / chajjas of building including removal of debris out side MD land all as directed.

M&L Water proofing treatment on roof surface (Horizontal & Vertical surfaces) in following sequence through manufacturer / authorized applicator of the manufacturer including taking down of existing roof treatment, properly cleaning & drying the concrete surfaces complete complete all as specified and as directed.

a) M&L 10 mm thick rendering on roof surfaces/concrete surface in CM 1:3 complete.

b) Applying evenly a tack coat of industrial bitumen 85/25 grade @ 1.2 kg/ Sqm incl cleaning surfaces.

c) Laying unrolled over the bitumen coated surface,3 mm thick polymeric water proofing membrane Hyperplas standard wt not less than 3kg /Sqm with 100 mm over laps shall be sealed by flame as per manufacturers instruction.

d) Applying two coats on old surfaces of bituminous base aluminium paint including preparation complete

M & L excavation in post holes (or similar holes) each n. exc 0.5 cum, getting out in soft/loose, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm complete all as specified and as directed.

M & L hardcore of broken stone of gauge n.exc.63mm,deposited,spread and levelled in layers n exc. 15 cm thick, watered and well rammed to a true surface complete all as specified and as directed.

M&L for PCC 1:2:4 type B-2 using 40mm graded stone aggregate as in coloumns, pillars and posts complete all as specified and as directed.

S&F roof trusses (framed) trussed, purlins, crane gantries, rails and fastenings and heavy brackets framing (Beam, tee angle, channel or flatsections) including distance pieces cleats etc conforming to Fe 410W (Gde 250) quality A complete all as specified and as directed.

S&F Plates (plain or chequered) channels, square cut or notched (ordinary and counter sunk) forming holes, without any attachment Fe- 290 (Gde E-165) complete all as specified and as directed.

S & F mild steel bolt exc 20 & n, exc 25mm dia, purpose made with hexagonal or square head one end and screwed the other, or screwed both ends; each screwed end to be fitted with washers and one hexagonal or square nut. Exc 30cm long complete all as specified and as directed.

S& F Pre- painted galvatume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified complete all as specified and as directed.

Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified complete all as specified and as directed.

M&L MS work as in wind ties for roof including securing bolts, drilling holes, notching for wire etc complete all as directed.

M&L for Outdoor Parking tiles 12 mm thick ( square / rectangular) area of each tile exceeding 0.06 Sqm but not exceeding 0.16 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match ( in patches to match the existing colour /shed) over and including screed bed 15mm thick rendering in CM 1:6 all as directed.

Surface excavation n.exc. 30 cm deep and averaging 15 cm deep and getting out in soft and loose soil complete all as specfied and directed.

S&F 300mm long MS sliding door bolts, plate type, stove enamelled black with bright bolt not less than 12mm dia with and including a min of 6 bolts and nuts, four on bolt plate and two on staple plate and fixed complete all as specfied and directed.

M & L rendering in CM 1:4 , 10 mm thick on ceiling surfaces finished even and smooth without using extra cement complete all as specified and directed

M&L for applying two coat of distemper Oil emulsion white or tinted on new putty surfaces of wall complete all as specified and directed.

M & L for cutting chases, pinning in brick walls/ stone concrete block or slab walls , making good to facing where required and pointing in cement mortar 1:3 to ends or edges of landings , steps, cills, sunshades, shelves, lintels etc; and cutting chases for concealed water tubing or cocealed conduit wiring, etc and making good , cutting not exceed 10 cm girth complete all as specified and as directed.

S & F for Pillar taps, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered ‘Hot' or ‘Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed, 15 mm fancy type fixed complete. Make :- Prayag/Plumber/ JAQUAR

S & F for Stop valves, cast copper alloy, chromium plated concealed type screwed down, high pre-ssure, with crutch or but-terfly handle, screwed both ends for iron pipe or for unions and fixed , 15 mm fixed complete all as specfied and directed.

S & F for Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed , 20 mm fixed complete all as specfied and directed.

S & F for Grating doom 100 mm dia of PTMT (Minimum weight 25gms) fixed complete all as specfied and directed.

S & F for Soap dish, any type, fixed to plugs with chromium plated brass screws fixed complete all as specified and directed.

S & F for PVC connections 15 mm size with PTMT nuts of length 450mm fixed complete all as specified.

S&F vitreous china water closet Padestal pattern( white ) excluding fixing bolts, flushing cistern and flush pipe complete all as directed.

S&F chromium plated health fauset,teliphonic type,with CP flexible arms and Jet,of approved make, suitable to fixed to 15mm bore CP angle valves, complete all as directed.

S&F 15 mm dia bib tap cast copper alloy (fency type), chromium plated ,'with crutch or butterfly handle, screwed down for iron pipe or for brass ferrule all as directed.

S&F 15 mm dia Push tap cast copper alloy chromium plated ,'with push button screwed down for iron pipe or for brass ferrule all as directed.

Providing precast cement concrete 1:2:4 type B-1 (using 20mm graded stone agg)as in manhole covers set in cement motar 1:6 all as specified and directed including necessary formwork and moulds all as specified.

M&L Extra for forming fair finished drain or channel 30 cm inner girth in cement concrete, using extra cement, including forms, moulds, mitred / stopped ends etc complete all as specified and directed.

M&Lfor loose filling with(broken bricks) aggregate ofgauge 80-150 mm in soakage well complete all as specfied and directed.

Excavating over areas, n exc 1.5 m deep and getting out in soft/loose soil complete all as specfied and directed.

Excavating over areas, exc 1.5 m deep and n exc 3 m getting out in soft/loose soil complete all as specfied and directed.

Returning filling in, including spreading, levelling, watering and well ramming in layers n. exc. 25 cm in soft/loose soil complete all as specfied and directed.

Removing excavated material n exc 50 m and depositing where directed at a level not exc 1.5 mtr above the starting point complete all as specfied and directed.

M&L salt Glazed stone ware drain pipe 150 mm bore grade 'A' laid in trenches and jointed and testing complete all as specified & directed.

M&L for 20mm thick Screed bed or bedding layer of cement mortar 1:4 complete all as specfied and directed.

S&F cement chequered tiles size 30cmx30cmx22mm thick machine cut pressed set jointed and pointed in neat cement slurry with grey cement and pigments in floors and cut and polished complete all as specified and directed

M&L for RCC M-25 (Design mix ) in foundations, including, rafts, footings, foundation beams, bases for columns, etc , basement slab, under reamed piles and mass concrete complete all as specfied and directed.

M&L for RCC M-25 (Design mix ) as in columns , pillars, piers, posts and struts etc complete all as specfied and directed.

M&L for RCC M-25 (Design mix ) in beams, cantilevers, bressumers, lintels over 1.50 m span complete all as specfied and directed.

M&L for RCC M-25 (Design mix ) in slab supported on walls,beams and coloumns in floors,roof, lamding,balconies,canopies, deck slab complete all as specfied and directed.

M&L for form work to sides of concrete foundations, footings, bases of columns, raft and raft beams sides and soffits (if any) of foundation and plinth beams and similar works; vertical or to batter complete all as specfied and directed.

M&L for form work to sides of pillars, posts, struts, piers, columns and stanchions complete all as specfied and directed.

M & L for Formwork to sides and soffits of floor or roof beams, beam haunchings,girders, bressummers,lintels, cantilevers, shelves including sup- ports, overhangs,etc. also splays between floors and beams, etc complete all as specfied and directed.

M & L for formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick (Horizontal or sloping), work in rough finished flat surfaces of concrete for flat rough surface of finish complete all as specfied and directed.

M & L for mild steel TMT bars of 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips quality conforming to Gd I, IS-432 Part I complete all as specfied and directed.

S&F TMT bars 5mm and over upto and including 10mm dia in stirrups, spacers and binders bent to shape required,including binding with mild steel wire (annealed) not less than .9mm dia complete all as specfied and directed.

M&L for brick work with fly ash modular bricks, straight or curved on plan exc 6m mean radius, built in CM 1:6 complete all as specfied and directed.

M & L rendering 15mm thick on brick wall or concrete surface in cement mortar 1:6 finished even and smooth without using extra cement complete all as specified.

M&L 15mm thick rendering on fair faces of concrete/brick surfaces in CM 1:4 mixed with water proofing compound as per manufactures instruction finished even and smooth without using extra cement complete all as specified and as directed. Note:- WPC shall be measured and paid sperately.

M & L rendering 5mm thick on ceiling in cement mortar 1:3 finished fair and even smooth without using extra cement complete all as specified

M & L applying two coats of cement based paint on newly plastered or unplastered wall surface including preparation of surfaces, complete all as specified.

M & L applying three coat of white wash on newly plastered or unplastered wall surface including preparation of surfaces, complete all as specified.

M & L applying two coat of white wash on newly plastered or unplastered ceiling surfaces including preperation of surfaces, complete all as specified.

M & L Moorum / red bajari filling in floor or pavings, laid in layers n. exc 15 cm thick, spreade, levelled and rammed including watering as required.

M&L for 40 mm thick PCC 1:2:4 type B-0 using 12.50 mm graded aggregate as in flooring with finishes cement concrete surface even & smooth without using extra cement.

M & L Damp proof course 40 mm th. In PCC 1:2:4 type B-0 to horizontal or vertical surface complete all as specified and directed

S & F vitreous china half stall urinal white incl. connection to flushing pipes and out going pipes & brackets etc complete all as specified and directed

S&F in angle cock 15 mm bore fancy type chromium plated, with capstan head, high pressure, screwed down, screwed for iron pipe or for brass ferrule fixed to iron pipe complete all as specified and directed

M&L for two coats of cement baised paint on walls including preparation of surfaces on old plaster surfaces complete all as specified and directed.

M&L Brick work with sub class 'B' bricks in one brick thick honey comb walling ,built in cement mortar 1:4 complete all as specified and directed

M&L for broken bricks or brick bat loose filligs with aggregate of gauge 80 to 150mm in soakage pits,soakage well complete all as specified and directed

Taking down carefully any type of old unserviceable point wiring (light, fan, socket bell or power) , complete with fittings such as switches ceiling roses, lamp holders sockets, regulators with PVC conduit surface /concealed or wooden patterns including sunken cast iron /pressed steel terminal boxes etc and making good the disturbed surfaces of walls, roof, floors etc to match with the existing surfaces complete all as specified and directed.

Taking down carefully Main switch and Distribution boards any make and size complete all as specified and as directed .

Taking down carefully Old unserviceable any type sub main wiring with wooden batten/ PVC surface conduit of any size and making good the disturbed surfaces of walls, roof, floors etc to match with the existing surfaces complete all as specified and directed.

Taking down the ceiling fan in situ and refixing after servicing, repairing and painting to ceiling fan including scratching old paint and preparation of surface for painting with one coat of white/grey enameled paint complete all as specified and directed.

M&L of Sub main wiring with two single core PVC Insulated cable two run of size 6.0 Sqmm multi-strand copper conductor FRLSH cable 1100 volts grade drawing in and including PVC conduit, medium grade not less than 25 mm dia with all conduit accessories and one run of 6.0 Sqmm multi-strand copper conductor FRLSH cable as continuous earth wire complete all as specified and directed. Note : - Two run of 6 Sqmm & one run of 6 Sqmm cable shall be measured as one unit run.

M/L for Sub Main Wiring with two single core PVC insulated cable of size 4.0 Sqmm multistranded copper conductor drawing into and including concealed rigid non-metallic PVC conduit, medium grade not less than 20mm dia with all conduit fitting,fixing accessories and 4.00 Sqmm multistrand copper conductor cable as continuous earth wire complete all as specified and directed by Engineer in charge Note :- Two Nos of 4.00 Sqmm Wire and One No of 4.00 Sqmm Earth wire in One RM length Measured as one unit length.

M&L for Point wiring with PVC insulated 1.5 sq mm multi stranded copper conductor cable 1100 volts grade drawn into and including concealed PVC conduit not less than 20mm (ISI marked) including all fitting and fixing accessories including sunk in cast iron/pressed steel terminal boxes duly painted with two coats of antirorrrosive paint outside and two coats of aluminium paint inside, 2.8mm thick hylam brand laminated white bakelite sheet cover for mounting of switches, sockets, fan regulators etc and PVC insulated 1.5 Sqmm multistranded copper conductor cable as earth wire and making good the disturbed surfaces to match with the existing surfaces complete all as specified and directed by Engineer in charge.

(a) One light/Bell point controlled by one switch.

(b) One fan point controlled by one switch.

(c) One socket point controlled by one switch on same board.

(d) One socket point controlled by one switch on Independent board.

Description all as per item No 175 here in befor but with 1100 volts grade copper standard conductor cable of size 2.5 Sqmm with 2.5 Sqmm solid copper conductor PVC for 3 pin switch socket outlet15 Amp independent board complete all as specified and directed by Engineer in charge .

S & F for Socket outlet 3 pin, 5 Amps and AC 230 volts flush type complete all as specified and directed by Engineer in charge

S & F for Ceiling rose surface bakelite 65 mm x50 mm three terminal AC 230 volts flush type complete all as specified and directed by Engineer in charge

S&F in repair fan regulator step type of polycarbonate complete all as specified and directed by Engineer in charge

S&F in repair sheet metal enclosure DBs singlep pole and Neutral 4 way with 200 amps rated bus bar 240 volts single pole and neutral complete double door complete all as specified and directed by Engineer in charge

S&F in repair sheet metal enclosure DBs singlep pole and Neutral 8 way with 200 amps rated bus bar 240 volts single pole and neutral complete double door complete all as specified and directed by Engineer in charge

S&F sheet metal enclosure MCB distribution board including 200 Amps bus bar triple pole and neutral vertical 415 V, 4 Way, double door type complete all as specified and directed by Engineer in charge with incoming MCCB of 63 Amps capacity

S & F in repair MCB TPN 415 volts 63 Amps, C Series complete all as specified and directed by Engineer in charge .

S & F for switch socket combination 3 pin 5 and 16 Amps AC 230 volts flush type complete all as specified and directed by Engineer in charge

Supply and fixing Single phase ceiling fan 1200 mm permanent magnet brushless DC Motor 230 v 50 Hz single phase 26-30watt rated current 0.16 amp,pf 0.98 370/360 rpm air delivery 220m3 rated service value 629m3/min/watt no of blades three type of blade leaf 1.05 mm thick aluminium sheet remote control radio frequency 5 speed +off timer option speed regulation class of insulation two nos bearings including connecting wire complete with all as required and directed at site by eng in charge Make : Havells/ CG/ Bajaj

S & F in repair Smart bright Batten Series, LED luminaire using LEDs 20 watt 110 LM/watt with diffuser which ensures uniform distribution and comfort batten series features latest LEDs and delivers consistent light output, stable color start Extruded Aluminum housing, Energy efficient, Flicker free start Inbuilt driver unit Suitable for wall and ceiling mounting using brackets complete all as specified and as directed.

Supply & Fixing Smart bright Batten Series, LED luminaire using LED 22 watt 110 Lumens/watt with diffuser which ensures uniform distribution and comfort, batten series features latest LEDs and delivers consistent light output, stable color start Extruded Aluminium housing, Energy efficient, Flicker free start Inbuilt driver unit, Suitable for wall and ceiling mounting using brackets with and including the luminaire testing on completion as per Standard Specification IEC 60598-2-1 / IS: 10322(Parts/Secl), (Make : Philips Cat part No BN 021 LED 22S 6500/4000 PSU GR S1/GE /Oshram

Supply & Fixing in repair single pole and netural sheet metal enclosure with a two pin and earth plug and socket complete with 01 number single pole MCB 20 Amps complete all as specified & directed. Make:- Legrand/ ABB/GE

Supply and fixing MCB single pole and neutral 240 volts 40 Amps, B Series complete all as specified and directed by Engineer in charge

Supply and fixing MCB/Isolators single pole 240 volts upto 40 Amps, B Series complete all as specified and directed by Engineer in charge

Earthing complete with galvanised steel earth plate electrode 60 cm x60 cm x 6 mm thick buried directly in ground ,(Earth pit not less than 2.25 meter deep below ground level) with top edge of plate not less than 1.5 meter below normal ground level ,connected to and including galvanised iron earth wire 4 mm dia by means of nut, bolts, check nuts and washers of galvanised iron or steel complete all as specified and directed including testing on completion including the material and labour of the following : - (a) Excavation and earth work for drilling hole for electrode in any type of Soil. -1, reinforced with welded steel wire fabric weighing not less than1.87 Kg/ Sq meter. (c) Funnel with watering pipe of GI 20 mm nominal bore light grade and lugs etc complete all as specified and directed (d) 15 mm nominal bore medium grade GI protection pipe 5 meter long for protection of earthing lead complete all as specified and directed. (e) Requisite quantity of common salt and charcoal. (f) Testing of earthing.

Supply and fixing Single phase propeller type ventilating ( Exhaust fan) heavy duty AC 230 volts 300 mm sweep, metallic body complete with Metalic louvers including making holes of suitable size and making good the disturbed surface and shutters including electric connection with pvc flexible twin core copper wire from ceiling rose to Exhaust fan, nut & bolt complete all as specified and as directed. Make:Bajaj,havells or equivalent.

Supply and fixing Single phase propeller type ventilating ( Exhaust fan) heavy duty AC 230 volts 450 mm sweep, metallic body complete with Metalic louvers including making holes of suitable size and making good the disturbed surface and shutters including electric connection with pvc flexible twin core copper wire from ceiling rose to Exhaust fan, nut & bolt complete all as specified and as directed. Make:Bajaj,havells or equivalent.

Supply & fix in replacement of LED Security Light Luminaire 25 watt with 2500 or more lumen warm white, surge protection device upto 4KV, IP65 or more, IK07 or more, potted driver suitable for 180 to 270 V, 50 Hz, light engine driver base.pole adapter, powder coated pressure die cast aluminium with heat resistant toughened glass with lens type,GI pipe 40 mm dia medium Grade not less than with 1.2 m.long in any shape with 2 nos of pole fitting clamps made out of MS flat , nuts and bolts and painting with aluminium paint. complete all as specified and as directed.Make: Havells Cat Part No : LHDAUU7PA7J025 or equivalent in philips or bajaj

Supply & fix of LED Security Light Luminaire 35 watt 6000K with .high power LED cool white,CRI 75,+/- 5% supply voltage 220/240/50 Hz, light engine driver base.pole adapter,powder coated pressure die cast aluminium with heat resistant toughened glass with lens type,GI pipe 40 mm dia medium Grade not less than with 1.2 m.long in any shape with 2 nos of pole fitting clamps made out of MS flat , nuts and bolts and painting with aluminium paint. complete all as specified and as directed. Make:Havells/Philips/Wipro

S & F in repair of LED Decorative /mirror light fitting 10 watt along with fixture Surface mounted suitable for indoor aplication , connector block, etc . Complete with all accessories internally pre-wired and including round wood block, connecting up with three core flexible flexible copper conductor cable suitable size complete all as specified and directed by Engineer in charge. Make- Havells LUMILINEPLUSSBS10WLED865SPCSS or equivalent in PHILIPS ,BAJAJ

S&F in repair Bulk head endura LED light fitting complete with10 watt LED and making necessary electric connection to ceiling rose with copper conductor of suitable size & length complete all as specified & directed. Make :Havells Cat Part No.HEXAFT10WLED857SSYMBOPC or Equivalent make Philips / BAJAJ

S&F lamp holder PVC/Polycarbonate type body, with back plate along with 9 watt LED lamp for batten fitting complete all as specified and directed by Engineer in charge.

S & F for Switch piano flush type AC 230 volts 5 Amps single pole one way complete all as specified and directed by Engineer in charge.

Supply , laying and testing cable XLPE insulated , screened, PVC bedded , galvanized , steel strip or wire armoured, electric power cables ( Heavy duty ) 1100 volts grade with stranded aluminium conductor of size 2 core 16 Sqmm complete all as specified and directed by Engineer in charge

Supply , laying and testing cable XLPE insulated , screened, PVC bedded , galvanized , steel strip or wire armoured, electric power cables ( Heavy duty ) 1100 volts grade with stranded aluminium conductor of size 4 core 16 Sqmm complete all as specified and directed by Engineer in charge

Supply , laying and testing cable XLPE insulated , screened, PVC bedded , galvanized , steel strip or wire armoured, electric power cables ( Heavy duty ) 1100 volts grade with stranded aluminium conductor of size 3.5 core 35 Sqmm complete all as specified and directed by Engineer in charge

M&L GI tubes of size 40mm dia light grade, galvanised with all fiting laid in tranches for protection of cable in road /drain crossing complete all as specified and directed by Engineer in charge

Supply,laying & fixing double wall corrugated (DWC) pipes made of high density polythyline (HDPE) with all accessories i.e. all type of joints,Sockets,Elbows,bends and End caps etc.. all as specified and directed by Engr in Charge.of size 50 mm outer dia and 38 mm inner dia of Make;-Telerex/Tirupati or E-in-C approved Make

kamakshi construction

upadhyay Builders

charanjeet singh

M/S RAJ BUILDERS

DEEPAK CONSTRUCTION