Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹28.2 LAccepted-AOC | L1 | Accepted-AOC Being lowest | |
| 2 | L2₹30.7 L+₹2.0 L (7.10%)Rejected-Finance | L2 | Rejected-Finance Other than lowest | |
| 3 | L3₹30.9 L+₹2.2 L (7.83%)Rejected-Finance | L3 | Rejected-Finance Other than lowest | |
| 4 | L4₹31.2 L+₹2.5 L (8.61%)Rejected-Finance 205L MODEL TOWN LUDHIANA | LUDHIANA | LUDHIANA | PUNJAB | L4 | Rejected-Finance Other than lowest | |
| 5 | L5₹32.2 L+₹3.5 L (12.3%)Rejected-Finance DAULAT NAGAR SOHALLA ROAD AJIJPUR DHANOLI AGRA UP PIN 282001 | AGRA | UTTAR PRADESH | 282001 | L5 | Rejected-Finance Other than lowest |
Tender Value
₹45 L
EMD Value
₹90,000
Closing Date
23 Sept 2024, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Maj Dinoop Kumar
GE (W) Agra
COMPREHENSIVE MAINT TO MD AND OTM ACCN UNDER AGE B/R - II OF GE (W) AGRA
2024_MES_670689_1
8012/1032/E8
Open Tender
Civil Works
Item Rate
270 days
GE (West) Agra
Please refer Tender documents.
9 documents required · 9 mandatory
₹500
GE (West) Agra
₹90,000
6 Dec 2024
3 Sept 2024
25 Sept 2024
3 Sept 2024
23 Sept 2024
10 Sept 2024
Amount
Demolition of brick work or stone/boulder masonry, built in cement mortar including all quoins, arches, pillars etc but excluding ashlar ficings, dressed stone work and pre-cast concrete articles complete all as specified and directed by Engr-in-Charge.
M&L for brick work with sub class ‘B’ bricks old size, straight or curved on plan exc 6 M mean radius, built in CM 1:6 complete all as specified and directed by Engr-in-Charge.
M&L for brick work with sub class ‘B’ bricks old size, straight or curved on plan exc 6 M mean radius, built in CM 1:6 complete all as specified & directed but except brick. Note:- Bricks obtained from item No 2 shall be reused after cleaning.
Brickwork with sub-class `B' brick straight or curved on plan to any radius in half brick thick walls built in CM 1:4 complete all as specified and directed by Engr-in-Charge.
Taking down cement or cement lime plaster of any discription on brick or stone walls/ ceilings etc, including raking out joints, hacking for key, scrubbing down with water etc complete all as specified and directed by Engr-in-Charge.
M&L for 10mm thick rendering in CM 1:6 on any faces of brick or concrete surfaces of walls & finishing the surface even and fair without using extra cement complete all as specified and directed by Engr-in-Charge.
M&L for 15mm thick rendering in CM 1:4 on brick or concrete surface with water proofing compound @ 3% by weight of cement finished other than fair complete all as specified and directed by Engr-in-Charge. Note : 1. Water proofing compound will be measured and paid seperately under respective item of Sch ‘A’. Note : 2. External plaster site includes G+2 Bldgs
Supply only integral water proofing compound liquid admixture for cement mortar complete all as specified and directed by Engr-in-Charge..
M&Lwashed stone grit plaster on exterior walls in two layers under layer 12 mm thick cement plaster 1:4 (1 cement 4 coarse sand furrowing the under layer with scratching tool applying cement slurry on the layer @ 3 Kg of cement per sqm, top layer 15mm cement plaster 1:1/2:2 ( 1 cement 1/2 coarse sand :2 stone chipping 10mm nominal size ) in panels with groove all around as per approved pattern incl. scrubbing and washing the top layer with brushes and water to expose the stone chippings complete all as specified (payment for providing grooves shall be made separately ).complete all as specified and directed by Engr-in-Charge.
M&L for forming groove of uniform size 15mm wide and 15 deep in the top layer of washed stone girthplaster as per approved pattern using wooden battens ,nailed to the under layer including removal of wooden battens repair tothe edges of panes and finishing the groove complete all as specified and directed by Engr-in-Charge.
M & L for rendering 10mm thick in CM 1:4 on ceiling surface finished even and smooth without using extra cement complete all as specified and directed by Engr-in-Charge.
M&L Preparing newly plastered or un plastered surfaces of wall and applying two coats of oil bound distemper with roller application over a coat of primer over a coat of average 1mm thick wall care putty on new plastered surfaces complete all as specified and directed by Engr-in-Charge.
M&L for applying two coats of oil bound distemper with roller on old decorated wall surfaces over 1 mm thick white putty including complete removal of existing treatment with mechanical complete all as specified and directed by Engr-in-Charge.
M & L for Preparing newly plastered or un plastered surfaces of wall and applying two coat of cement base paint over a coat of primer complete all as specified and directed by Engr-in-Charge.
M&L for Preparing old plastered or un plastered surfaces of wall and applying one coat of cement base paint complete all as specified and directed by Engr-in-Charge.
M&L for applying three coats of white wash on wall including preparation of new plastered or un-plastered surfaces of walls, complete all as specified and directed by Engr-in-Charge.
M&L for applying three coats of white wash on ceiling including preparation of new plastered or un-plastered surfaces, complete all as specified and directed by Engr-in-Charge.
M&L for complete removal of extg treatment with mechanical device of old plastered surfaces of ceiling and applying two coat of white wash (match with new surface) complete all as specified and directed by Engr-in-Charge.
Demolition of cement concrete (unreinforced) in ground floors and pavings n.exc 15cm thickness (below or above ground level) complete all as specified and directed by Engr-in-Charge.
M&L 25 mm thick PCC 1:2:4 type B-1 (using 20 mm graded stone aggregate) as in sub base of flooring finished even and fair without using extra cement complete all as specified and directed by Engr-in-Charge.
Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing) complete all as specified and directed by Engr-in-Charge.
M&L for coloured glazed ceramic tiles in vertical surface 350 x 250 x 7 mm / 450 x 350 x 7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match tiles including 10mm thick rendering in CM 1:4 on brick wall complete all as specified and directed by Engr-in-Charge.
M&L coloured non skid ceramic tiles 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.11 Sqm but not exc. 0.18 Sqm as in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the colour of tiles laid over and including 15mm thick screed bed or bedding layer of CM (1:6) complete all as specified and directed by Engr-in-Charge.
M&L coloured non skid ceramic tiles 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.11 Sqm but not exc. 0.18 Sqm as in skirting etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the colour of tiles and including 10mm thick rendering in CM 1:4 on brick wall complete all as specified and directed by Engr-in-Charge.
M&L coloured non skid ceramic tiles 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.18 Sqm but not exc. 0.38 Sqm as in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the colour of tiles laid over and including 15mm thick screed bed or bedding layer of cment mortar (1:6) complete all as specified and directed by Engr-in-Charge.
M&L coloured non skid ceramic tiles 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.18 Sqm but not exc. 0.38 Sqm as in skirting etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the colour of tiles and including 10mm thick rendering in CM 1:4 on brick wall complete all as specified and directed by Engr-in-Charge.
M&L Machine cut kota stone slab flooring 20-25mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete laid over and including 20mm thick screed bed CM (1:6) complete all as specified and directed by Engr-in-Charge.
M&L Machine cut kota stone 20-25 mm thick as in riser of step, skirting,dado and pillar etc. laid and jointed with grey cement slurry mixed with pigment to match the shade of the stone including grinding and polishing laid over and including 15mm thick rendering CM (1:4) complete all as specified and directed by Engr-in-Charge.
M&L for 20mm thick Granite (of any type) work (table rubbed and polished) in marble in steps, pillars, wndow cills, pillars, window cills, cooking platforms and like in CM (1:4) incl pointing in white cement (1:2) match the shade of the slab using marble dust with admixture of pigment to match with shade of granite including rubbing and polishing incl 20mm thick screed bed in CM (1:4) complete all as specified and directed by Engr-in-Charge.
Boring holes through cooking platform lining for pipes ,etc n'exc 50mm dia and making good complete all as specified and directed by Engr-in-Charge.
Taking down chowkhats or frames with shutters (without taking off shutters from the frames) n. exc 1.5 Sqm each complete all as specified and directed by Engr-in-Charge.
Taking down chowkhats or frames with shutters (without taking off shutters from the frames) exc 1.5 Sqm but not exc 4 sqm each complete all as specified and directed by Engr-in-Charge.
Taking down shutter of any description exc 1 Sqm and not exc 2 Sqm each complete all as specified and directed by Engr-in-Charge.
Refixing the shutters of any description exc 1.00 Sqm but not exc. 2 Sqm each in the same opening or in other opening complete all as specified and directed by Engr-in-Charge.
M&L cement concrete type B-0, 1:2:4 mix ( 12.5 mm graded agg) filling in door frames, coping, window chill etc complete all as specified and directed.
M&L for Pressed steel frame size 105 x 60mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate etc complete all as specified and directed by Engr-in-Charge..
M&L for Pressed steel frame size 125 x 60mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate etc complete all as specified and directed by Engr-in-Charge.
S & F 35 mm thick flush shutters, board solid core construction, with block board core and plywood face panels, commercial type on both sides complete all as specified and directed by Engr-in-Charge.
S&F 35 mm thick 2nd class hard wood glazed skeleton door shutters open rebated and prepare to receive glass, gauge etc. divided into suares, with plain chamfered or rounded, fitted with cut including mitred beads for securing glass etc sizes of members of shutters as specified in SSR Part-I section 8, clause No 8.24 (a) complete all as specified and directed by Engr-in-Charge.
Supply & fix factory made solid panel PVC door shutter 30mm thick (style) consisting of frame, made out of MS tubes for top and bottom rails MS frame shall be covered with heat moulded wood grain printed PVC sheet used instead of plain colour PVC , ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for to rail & bottom rail, paneling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the stiles & rails with suitable PVC sheet beading and jointed to getter with solvent cement, supplying & fixing in the frame at site as per specification & drawing for Item No. 08080 on page No 149 of SSR 2020 (Part-II)
S & F Solid PVC door frame of size 50mm x 47mm made out of 5mm wood grain printed PVC sheet instead of plain colour PVC sheet reinforced with MS square tube, as shown on drawings as per manufacturers specification complete all as specified and directed by Engr-in-Charge.
S & F Steel windows with side hung shutters including projecting type hinge with hold fast, steel handle and steel peg stay, complete with glazing bars, dovetailed or welded complete all as specified and directed by Engr-in-Charge.
S & F Steel windows with side hung shutters including projecting type hinge with hold fast, steel handle and steel peg stay, complete with out glazing bars, dovetailed or welded complete all as specified and directed by Engr-in-Charge.
S & F Steel ventilators with top hung shutters including hinge with hold fast, steel handle and steel peg stay, complete with out glazing bars, dovetailed or welded complete all as specified and directed by Engr-in-Charge.
S&F for framed work such as grills, grating etc. with ends of bars shouldered and/or riveted or forged into spike, framed guard bars, barred iron doors, ladders, framed balusters, walk ways, railing framed work of water tank and similar work confirming to Fe 290 Gde E-165 complete all as specified and directed by Engr-in-Charge.
S & F Stainless steel wire cloth, 0.71 mm nominal dia of wire fixed with tinned tacks, of 20mm mesh of stainless steel wire staples complete all as specified and directed by Engr-in-Charge.
S&F 3 mm thick sheet glass ordinary quality and glazing with oil putty in squares not exceeding 0.5 Sqm in each pane complete all as specified and directed by Engr-in-Charge.
S&F 3 mm thick Figured glass, pin headed type and glazing with oil putty in squares not exceeding 0.5 Sqm in each pane complete all as specified and directed by Engr-in-Charge.
S&F 150 mm long Aluminium, anodised, barrel tower bolts of extruded section complete all as specified and directed by Engr-in-Charge.
S&F 300 mm long Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy complete all as specified and directed by Engr-in-Charge.
S&F 150 mm long aluminium alloy handles, fabricated type, anodised complete all as specified and directed by Engr-in-Charge.
S&F 100 mm long medium weight, cold rolled mild steel Butt hinges complete all as specified and directed by Engr-in-Charge.
S&F Floor door stopper 150 mm long of aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in floor complete all as specified and directed by Engr-in-Charge.
S & F mild steel 300mm, ordinary rat tail rod pattern springs including roller and roller plate complete all as specified and directed by Engr-in-Charge.
M & L for second class hardwood plain fillets exc 13Sqcm and n exc 25 Sqcm, suare, rectangular in section clean sawn secured with nails for cubboard frame work complete all as specified and directed by Engr-in-Charge.
S & F 18/19 mm thick Prelaminated particle board, interior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination, for cup board shelf fixed with screws to timber frame/welding to steel frame work incl all around wooden beading min 10mm thick with varnishing and flushing with particle board complete all as specified and directed by Engr-in-Charge.
S & F Continuous (piano) hinges, mild steel, bright finish or electrogalvanised. (40mm Width of flaps when open) complete all as specified and directed by Engr-in-Charge.
S&F 100 mm long aluminium alloy handles, fabricated type, anodised complete all as specified and directed by Engr-in-Charge..
S & F Brass magnet catcher suitable for CB/cabinet shutter complete all as specified and directed.
S & F 20mm dia stainless steel pipe for cupboard complete all as specified and directed by Engr-in-Charge.
S & F 20mm stainless steel bracket complete all as specified and directed.
S&F in repairs stainless steel drapery rods, 25mm internal diameter including decoratine type brackets including fixing arrangement with drilling holes in walls, brackets etc complete all as specified and directed.
M&L Hand rails, half round or other steel section or core for wooden hand-rail straight portion, drilled and countersunk for balusters running bars, for doors, alusters, nosing to steps including embeding in concrete and screwing etc. wind ties for roof including securing holdpast and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc.; flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc., and similar work conforming to Fe-290 Gde E-165 complete all as specified and directed by Engr-in-Charge.
M&L for applying two coats of synthetic enamel paint (Ordinary tint) over a coat of pink primer including preparation of new or previously untreated wood and wood based surfaces of any description, not otherwise described, over 10 cm width or girth complete all as specified and directed.
M & L for applying one coat of synthetic enamel paint including preparation of old wooden surface of any discription not otherwise discribed over 10 cm width or girth, complete all as specified and directed by Engr-in-Charge..
M & L for applying two coats of synthetic enamel paint over a coat of red oxide primer including preparation of new steel surface over 10 cm width or girth, not otherwise described complete all as specified and directed by Engr-in-Charge.
M & L for applying one coats of synthetic enamel paint including preparation of old steel surface over 10 cm width or girth, not otherwise described complete all as specified and directed by Engr-in-Charge.
M&L for 75mm thick PCC 1:3:6 C-2 (using 40 mm graded crushed stone aggregate) as in sub base of floor/path/paving and plinth protection finished even and smooth without using extra cement complete all as specified and directed by Engr-in-Charge..
Demolition of cement concrete (reinforced) in roofs, floors (other than ground floors), beams, staircases, landing, chajjas and similar suspended work complete all as specified and directed by Engr-in-Charge.
M & L cutting holes into or through brick wall built in cement mortar superfacial area not exc 150 Sqcm and making good in cement mortar 1:3 or cement concrete 1:2:4 Type B-1 as required complete all as specified and directed by Engr-in-Charge.
S&F mild steel joist channel angle or tee sections fixed independently with out connecting plates etcof grade Fe-410-W (Gde E-250 quality B) complete all as specified and directed by Engr-in-Charge.
S&F 5.0 cm thick sand stone slabs in sun shades, chajjas, shelves, roof slabs etc n.exc. 2m in length punched dressed on face and along exposed edges, self faced on other side and set and pointed in CM 1:4 complete all as specified and directed.
M&L Mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with cli complete all as specified and directed by Engr-in-Charge.
M&L RCC Type B0 1:2:4 Type using (12.5mm graded aggregate) in Slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and beams etc. complete all as specified and directed.
Formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick (Horizontal or sloping rough finished surfaces of concrete flat etc. complete all as specified and directed.
Formwork to edges of concrete flats, treads, breaks in floors, window cills, concrete railings, openings in concrete walls, floor and roofs n exc 20 cm wide and sides of RCC/ PCC bands in walls, horizontal or sloping and similar work exc 5cm but n exc 10cm wide rough finished surfaces of concrete. complete all as specified and directed by Engr-in-Charge.
Taking up or down 15mm bore steel tubing and connection complete all as specified and directed.
All as per item No above but 20mm bore
S&F 15mm dia bore GI tubing, medium grade, galvanised with all fittings, fixed to walls, ceiling or laid in floors complete all as specified and directed by Engr-in-Charge.
Refixing/laying only old steel tubing 15 mm dia bore and connections in new or old position (Walls, ceiling, floors, etc) complete all as specified and directed by Engr-in-Charge.
S&F 20mm dia bore GI tubing, medium grade, galvanised with all fittings, fixed to walls, ceiling or laid in floors complete all as specified and directed by Engr-in-Charge.
Refixing/laying only old steel tubing 20 mm dia bore and connections in new or old position (Walls, ceiling, floors, etc) complete all as specified & as directed.
S&F in repairs 10 ltrs capacity PVC flushing cistern low level (white) with inlet ball valve and handle including flush pipe, brackets, rubber bush, washers etc complete all as specified and directed.
S&F in repair vitreous china squatting pan Orissa pattern size 580x440mm white with 'P' or 'S' trap front or back inlet including footrest (excluding fluxing cistern and flush pipe) complete all as specified and directed by Engr-in-Charge.
S&F in repair vitreous china wash down water closet pan (Pedestal pattern), white with 'P' or 'S' trap incl seat and cover (excluding fluxing cistern and flush pipe) complete all as specified and directed by Engr-in-Charge.
S&F in repairs Vitreous china wash basin white flat back size 550 x 400mm incl waste pipe chain plug brackets complete all as specified and directed by Engr-in-Charge.
S&F in repair PVC connection 15mm size with PTMT nuts, 600 mm long complete all as specified and directed by Engr-in-Charge.
S&F in repair CP jet Spray heavy duty with PVC connection complete all as specified and directed by Engr-in-Charge.
S&F in repair CP health faucet ABS body with wall hook and 1 mtr stainless steel braided rubber hose complete all as specified and directed by Engr-in-Charge.
S & F in 15 mm bore brass chromium plated mixer hot & cold water screwed down, screwed for iron pipe complete all as specified and directed by Engr-in-Charge.
S&F in repair 15mm bore, brass chromium plated basin mixer screwed down high pressure with or without lettered Hot ot Cold with long screwed and fly nuts screwed for pipe and fixed complete all as specified and directed by Engr-in-Charge.
S & F in repairs 15 mm bore chromium plated fancy bib taps, cast copper alloy, with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule complete all as specified and directed by Engr-in-Charge.
S&F in repair 15 mm bore CP Stop valve / angle valve screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed complete all as specified and directed by Engr-in-Charge.
S&F in repair 15 mm bore CP two way angle valve screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed complete all as specified and directed by Engr-in-Charge.
S&F in repair 15 mm bore CP concealed Stop valves, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed complete all as specified and directed by Engr-in-Charge.
S&F in repair soap dish brass chromium plated of approximate size 100mmx80mm complete all as specified and directed by Engr-in-Charge.
S&F in repair Waste coupling of PTMT (half or full threaded) . (Minimum weight 32mm- 45gms/40mm-60 gms) of 32mm bore suitable for wash hand basin complete all as specified and directed by Engr-in-Charge.
S&F in repairs kitchen sink with drainage board made of stainless steel 1mm thick with plugs, washers incl bedding in CM 1:4 to dwarf wall or including cast iron cantilever brackets and connecting union to pipe, overall size 915mm x 460 mm bowl size 410mm x 330mm x 160 mm etc complete all as specified and directed by Engr-in-Charge.
S&F in repair 32mm CP Waste coupling (half or full threaded) in suitable for Sink complete all as specified and directed by Engr-in-Charge.
S&F 32 mm dia PVC flexible waste pipe 800mm long etc. complete all as specified and directed by Engr-in-Charge.
S&F in repair mirror cabinet PTMT size 350 x 445mm fixed with screws complete all as specified and directed by Engr-in-Charge.
S&F plate rack of 1mm thick stainless steel of size 750 x 900 x 230mm with three shelves fixed to wall complete all as specified and directed by Engr-in-Charge.
S & F in repair tubular towel rail 60 cm length of stainless steel 20 mm Dia with brackets type fixed with and including chromium plated brass screws and wooden/plastic cleats complete all as specified and directed by Engr-in-Charge.
S & F in repairs CP shower rose 125mm dia alongwith shower arm complete all as specified and directed.
S&F sheet glass shelf assembly consisting of 5.50mm thick sheet glass shelf 12 cm wide with chromium plated bracket guard and railing 60cm long complete all as specified and directed.
S&F in repair 150 mm square PTMT grating with openable flap (Min weight 100 gms) complete all as specified and directed by Engr-in-Charge.
S & F in repair 75mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints, fixed to wall complete all as specified and directed by Engr-in-Charge.
S & F in repair 110mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints, fixed to wall complete all as specified and directed by Engr-in-Charge.
S & F 75 mm bore PVC (SWR) bends of any radius complete all as specified and directed by Engr-in-Charge.
S & F 75 mm bore PVC (SWR) bends with access door of any radius complete all as specified & directed.
S & F 110 mm bore PVC (SWR) bends of any radiuscomplete all as specified and directed by Engr-in-Charge.
S & F 110 mm bore PVC (SWR) bends with access door of any radius complete all as specified and directed by Engr-in-Charge.
S&F 110 mm bore PVC (SWR) single T with access door of any radiuscomplete all as specified and directed by Engr-in-Charge.
S&F in 110 mm bore PVC (SWR) single Y with access door of any radius complete all as specified and directed by Engr-in-Charge.
S & F 110 mm bore PVC (SWR) cowl of any radius complete all as specified & directed.
Cutting chases, pinning in making good to facing where required and pointing in cement mortar 1:3 to ends or edges of landing, steps, cills, sunshades, shelves, lintels, etc and cutting chases for concealed water tubing or concealed conduit wiring etc and making good, cutting not exc 10 cm girth etc brick wall complete all as specified and directed by Engr-in-Charge.
S&F in repair 1000 ltrs capacity rotational moulded polyethylene water storage tank double layered, ISI engraved (cylindrical vertical with closed top) hoisted and fixed in position incl dismantling of water tank complete all as specified and directed by Engr-in-Charge.
S&F in repair 500 ltrs capacity rotational moulded polyethylene water storage tank double layered, ISI engraved (cylindrical vertical with closed top) hoisted and fixed in position incl dismantling of water tank complete all as specified and directed by Engr-in-Charge.
S&F 20mm dia ball valve high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe 20 mm dia (minimum weight - 210 gm) complete all as specified and directed by Engr-in-Charge.
S & F 20mm Gun-metal, globe or gate valves, with iron wheel head, screwed both end for iron pipe and fixed complete all as specified and directed by Engr-in-Charge.
Cleaning of roughened surface of sunken floor by brushing with wire brush to remove all dirt and applying a coat of cement slurry with 3.00 kg of cement per sqm and rendering 15mm thick in CM 1:3 using WPC finished rough (Sunken floor/Wall) and then applying two course treatment as follow:- (i) Applying bitumen primer @ 0.40 Kg/Sqm. (ii) Laying APP (Atactic polypropylene) modified membrance 3mm thick and weighting not less than 3.50 kg/Sqm with 100 GSM/Sqm non woven polyster mat as centre core reinforcement , laid with 75mm side over lap and 100mm end over lap sealed and finsihed neat. (iii) 40mm bore GI pipe for Spout pipe length 0.75m.
M & L for broken bricks loose filling with aggregates of gauge 40 to 80mm in sunken protion complete all as specified and directed by Engr-in-Charge.
S & F in repairs 75x125mm dia of PVC (SWR) floor trap, plain with grating incl jointing with solvent cement complete all as specified and directed by Engr-in-Charge.
S & F in repairs 125/110 mm dia of PVC (SWR) Gully trap, plain with grating incl jointing with solvent cement complete all as specified and directed by Engr-in-Charge..
M&L for Chequered cement concrete tiles 30cm x 30cm x 25mm thick, set, jointed in neat cement slurry and pointed in gray pigment cement and pigments neat cement to match the colour of tile laid over and including 15 mm thick screed bed or bedding layer of cement mortar 1:6 complete all as specified and directed by Engr-in-Charge.
M/S DEVENDRA KUMAR GUPTA (BID ID -3105929)
R.S BUILDERS (BID ID -3096856)
M/s S. K. Construction Co. (BID ID -3096667)
aman construction & general suppliers (BID ID -3109122)
M/S APOORVA CONSTRUCTION (BID ID -3107313)
C P Singh and Co (BID ID -3108427)
NAKSHA ENTERPRISES (BID ID -3108144)
Messars Maa Devi Construction Co. (BID ID -3108880)
saroj constructions (BID ID -3094633)
Mahendra Enterprises (BID ID -3106287)
MNR ASSOCIATES (BID ID -3097080)
Attar Singh and Sons (BID ID -3095959)
stage.html
html • 0.08 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .