GE(S) BTD 43 OF 2024-25 MAINTENANCE REPAIR OF STEEL FURNITURE ARTICLES UNDER GE(S) BATHINDA AT BATHINDA MIL STN

Amount

M&L to repair Almirah steel large/Almirah steel 1/2H 1/2shelf by replacing the following unserviceable parts with approved ones.Rest all as per the drawings and directed by Engr-in-charge. (DRG NO. FD-1031/ 67(M))/FD/E6/MAP/18)

MS lock 6 lever with duplicate key.

Chromium plated handle 150mm long.

Leg made out of 1mm thick MS sheet duly painted with one coat of red oxide primer.

Pane glass 3.5/ 4mm thick of almirah glazed large steel.

Note:- Pattern and shape of lock and handle will be determined as per actual requirement at site.

M&L to repair Almirah medium/small steel by replacing the following unserviceable parts with approved ones.Rest all as per the drawings and directed by Engr-in-charge.(DRG NO. FD-1032/243/67M))

MS lock 6 lever with duplicate key.

Chromium plated handle 150mm long.

Leg made out of 1mm thick MS sheet duly painted with one coat of red oxide primer

Pane glass 3.5/ 4mm thick of almirah small glazed steel.

Note:- Pattern and shape of lock and handle will be determined as per actual requirement at site.

M&L to repair Locker steel by replecing the following parts with approved ones.Rest all as per drawings and directed by Engr-in-charge. (DRG NO. FD-257/1029)

Chromium plated hasp and staple 75mm long.

Chromium plated handle 100mm long.

Leg made out of 1mm thick MS sheet duly painted with one coat of red oxide primer

MS hinge 75mm long.

M&L to repair Table 900mm x 600 mm with drawer by replacing the following parts with approved ones as mentioned below and as per the drawing and directed by Engr-in-charge. (DRG NO. FD-1008 )

MS lock of suitable size with duplicate key.

PVC handle of approved quality suitable for drawer.

Making the drawer functional by removing dents from MS sheet align and leveling the drawer and greasing it grooves so as to achieve smooth sliding complete.

Top (910mm x 610mm) made out of 18mm thick pre-laminated MDF board (exterior gde) one side classic walnut face and balancing white on other side duly teakwood beading 4x18/19mm all around of suitable size fixed by panel pins and adhesive with diamond cut pattern finishing at corners. Rest all as per the drawings and directed by Engr-in-charge.

S&F PVC/hard rubber toe of approved quality and suitable size.

M&L to repair Table 900mm x 600mm without drawer steel by replacing the top (910mm x 610mm) made out of 18mm thick pre-laminated exterior gde MDF board OSL (Designation PLMDF-12) one side Classic walnut face and balancing white on other side with teakwood beading 4x18mm thick all around of suitable size fixed by panel pins and adhesive with diamond cut pattern finishing at corners and polished with high gloss finish of lacquer polish. Rest all as per the drawing and directed by Engr-in-charge. (DRG NO. FD-1007 )

S&F PVC/hard rubber toe of approved quality and suitable size.

M&L to repair Table 900mm x 900mm steel by replacing the top (910mm x 910mm) made out of 18mm thick pre-laminated exterior gde MDF board OSL (Designation PLMDF-12) one side Classic walnut face and balancing white on other side with teakwood beading 4x18mm thick all around of suitable size fixed by panel pins and adhesive with diamond cut pattern finishing at corners and polished with high gloss finish of lacquer polish. Rest all as per the drawings and directed by Engr-in-charge. (DRG NO. FD-1009 )

S&F PVC/hard rubber toe of approved quality and suitable size.

M&L to repair Teapoy verandah by replacing the top (910mm x 460mm) made out of 18mm thick pre-laminated exterior gde MDF board OSL (Designation PLMDF-12) one side Classic walnut face and balancing white on other side with teakwood beading 4x18mm thick all around of suitable size fixed by panel pins and adhesive with diamond cut pattern finishing at corners and polished with high gloss finish of lacquer polish. Rest all as per the drawings and directed by Engr-in-charge. (DRG NO. FD-255 /208/ 35 )

S&F PVC toe for teapoy verandah of approved quality and suitable size.

M&L to repair Teapoy verandah (MAP) by replacing the top (760mm x 460mm) made out of 18mm thick pre-laminated exterior gde MDF board OSL (Designation PLMDF-12) one side Classic walnut face and balancing white on other side with teakwood beading 4x18mm thick all around of suitable size fixed by panel pins and adhesive with diamond cut pattern finishing at corners and polished with high gloss finish of lacquer polish. Rest all as per the drawing and directed by Engr-in-charge. (DRG NO.FD/E6/MAP/17 )

S&F PVC/Hard rubber toe for teapoy verandah (MAP) of approved quality and suitable size.

Spot welding on various items of steel furniture FD/TP

M&L to repair Table clerk (steel) by replacing the following parts with approved ones.Rest all as per the drawings and directed by Engr-in-charge. (DRG NO. FD-1004/381/307/84(M)).

MS lock of suitable size with duplicate key.

S&F PVC handle of approved quality suitable for drawer.

Making the drawer functional by removing dents from MS sheet align and leveling the drawer and greasing it grooves so as to achieve smooth sliding complete.

Top (1220mm x 610mm) made out of 18mm thick pre-laminatedexterior gde MDF board OSL (Designation PLMDF-12) one side Classic walnut face and balancing white on other side with teakwood beading 4x18mm thick all around of suitable size fixed by panel pins and adhesive with diamond cut pattern finishing at corners . Rest all as per the drawings and directed by Engr-in-charge.

S&F PVC/Hard rubber toe of suitable size.

M&L to repair Table officer (steel) by replacing the following parts with approved ones.Rest all as per drawings and directed by Engr-in-charge. (DRG NO. FD-1003/84(M)).

MS lock of suitable size with duplicate key.

S&F PVC handle of approved quality suitable for drawer.

Making the drawer functional by removing dents from MS sheet align and leveling the drawer and greasing it grooves so as to achieve smooth sliding complete.

Top made out of 18mm thick pre-laminated exterior gde MDF board OSL (Designation PLMDF-12) one side Classic walnut face and balancing white on other side with teakwood beading 4x18mm thick all around of suitable size fixed by panel pins and adhesive with diamond cut pattern finishing at corners. Rest all as per the drawings and directed by Engr-in-charge.

S&F PVC/Hard rubber toe of suitable size.

M&L to repair Table bed side (MAP) by replacing the following parts with prelaminated MDF board(exterior gde)/plywood BWR gde. Rest all as per drawings and directed by Engr-in-charge. (DRG NO. FD/E6/MAP/15, FD/E6/MAP/15(R))

Top made out of 18mm thick pre-laminated exterior gde MDF board OSL (Designation PLMDF-12) one side Naina teak/Classic walnut face and balancing white on other side duly provided with teakwood beading of suitable size.

Side made out of 18mm thick pre-laminated exterior gde MDF board OSL (Designation PLMDF-12) one side Naina teak/ Classic walnut face and balancing white on other side complete.

Back made out of plywood 6mm thick BWR Gde.

Upper drawer complete excluding handle.

Lower drawer complete excluding handle.

CP handle 100mm long of approved quality.

S&F PVC/Hard rubber toe of suitable size.

M&L to repair Bed hard (MAP) by replacing the following unserviceable parts with approved ones.Rest all as per drawings and directed by Engr-in-charge. (DRG NO. FD/E6/MAP/08,FD/E6/MAP/08(R )

Plywood 12mm(9 ply) thick BWR Gde size 1990mm x 855mm.

Nut and bolt of suitable size complete.

Pre-laminated MDFboard(exterior gde) of Head rest complete.

Pre-laminated MDFboard(exterior gde) of foot rest complete.

S & F PVC/Hard rubber toe of suitable size.

M&L to repair Table computer by replcing the following parts with prelaminated exterior gde MDF board OSL (Designation PLMDF-12).Rest all as per the drawings and as directed by Engr-in-charge. (DRG NO.FD/E6/MAP/03,TP)

Top made out of 18mm thick pre-laminated exterior gde MDF board OSL (Designation PLMDF-12) one side Naina teak/Classic walnut face and balancing white on other side duly provided with teak wood beading 4x18mm thick all around of suitable size fixed by panel pin and adhesive with diamond cut pattern finishing at corners.

Side made out of 18mm thick pre-laminated exterior gde MDF board OSL (Designation PLMDF-12) one side naina teak/Classic walnut face and balancing white on other side complete.

All as per item No 13.01 but Key board tray complete excluding telescopic channel

All as per item No 13.01 but pull out tray complete excluding telescopic channel.

All as per item No 13.01 but drawer complete excluding knob.

All as per item No 13.01 but middle shelf including vertical portion complete.

All as per item No 13.01 but bottom shelf complete.

Telescopic channel of suitable size and approved quality.

Note:- Sample and shade of materials will be determined as per actual requirement at site.

M&L to repair Table dining OR Steel by replacing the top (size 1900x685mm) made out of 18mm thick pre-laminated exterior gde MDF board OSL (Designation PLMDF-12) one side Classic walnut face and balancing white on other side with teakwood beading 4x18mm thick all around of suitable size fixed by panel pins and adhesive with diamond cut pattern finishing at corners and polished with high gloss finish of lacquer polish. Rest all as per the drawing and directed by Engr-in-charge. (DRG NO. FD-165(M) )

Removal of u/s members of lower steel frame and supply of new members of required size made out of M.S square 25mmx1.6mm thick pipe tubing . The rate of removal of u/s members by welding, cost of M S pipe, cutting of pipe into pieces of required size included in quoted rate. The cost of welding of end of pipe will be quoted separately.

M&L for gas welding of broken ends/new members lower frame of Table dining . The rate to be quoted for each point of M.S pipe 25mm square x1.6mm thick for welding throughout each point.

S&F PVC/Hard rubber toe of approved quality and suitable size.

Removing of unserviceable plywood from Charpoy plywood top (MAP) (FD/MAP-II/01) and providing 12mm thick (9 ply) plywood BWR Gde with suitable size (1990mm x 910mm) of nut and bolt including welding of loose joints if any, and painting by brush or by spray machine with one coat of Ist quality synthetic enamel paint of approved shade complete.Rest all as per the drawing & directed by Engr-in-charge.

Removing of unserviceable plywood from Charpoy folding (FD-388(R) and providing 8/9mm thick plywood BWR Gde with suitable size of nut and bolt including welding of loose jointsif any, and painting by brush or by spray machine with one coat of Ist quality synthetic enamel paint of approved shade complete.Rest all as per the drawing & directed by Engr-in-charge.

Note:- Net contract sum shall be calculated after deduction of Sch of credit.

M/S KARTIK BUILDERS

B K CONTRACTORS

M/S SUNIL TRADERS