PROPOSED CONSTRUCTION OF CHHATRAPATI SHAHU MAHARAJ RESEARCH, TRAINING and HUMAN DEVELOPMENT INSTITUTE (SARTHI) SUB CENTRE, KOLHAPUR (INCLUDING ELECTRICAL WORK)

Amount

Removing grass, gazer grass and disposing off out of building premises including making clean the ground by shovel and phavaras excetra. complete.

Excavation for foundation in earth, soil of all types, sand, gravel and soft murum, including removing the excavated material up to a distance of 50 meter. beyond the building area and stacking and spreading as directed, dewatering, preparing the bed for the foundation and necessary back filling, ramillimetering, watering including shoring and strutting excetra. complete. (Lift upto 1.5 meter.) By Mechanical Means

Excavation for foundation in earth, soils of all types, sand,gravel and soft murum, including removing the excavated material upto a distance of 50 metres beyond the building area and stacking and spreading as directed, dewatering, preparing the bed for the foundation and necessary back filling, ramillimetering, watering including shoring and strutting excetra. complete. (Lift from 1.5meter to 3.0meter) By Mechanical Means

Excavation for foundation in hard murum including removing the excavated material upto distance of 50 metres beyond the building area and stacking and spreading as directed, dewatering, preparing the bed for the foundation and necessary back filling, ramillimetering, watering including shoring and strutting excetra. complete. (Lift upto 1.50 meter) By Mechanical Means

Excavation for foundation in Hard murum and boulders including removing the excavated material upto a distance of 50 metres, beyond the building area and stacking and spreading as directed, dewatering, preparing the bed for the foundation and necessary back filling, ramillimetering, watering including shoring and strutting excetra. complete. (Lift from 1.5 meter to 3.0 meter.) By Mechanical Means

Excavation for foundation in Soft rock and old cement or lime masonry foundations including removing the excavated material upto a distance of 50 metres beyond the building area and stacking as directed, including dewatering, preparing the bed for the foundation and necessary back filling with available earth/murum, ramillimetering ,watering including shoring and strutting excetra. complete. (Lift from 1.5meter To 3.0 meter.) By Mechanical Means

Excavation for foundation in Soft rock and old cement or lime masonry foundations including removing the excavated material upto a distance of 50 metres beyond the building area and stacking as directed, including dewatering, preparing the bed for the foundation and necessary back filling with available earth/murum, ramillimetering ,watering including shoring and strutting excetra. complete. (Lift from 3.0meter To 4.5 meter.) By Mechanical Means

Excavation for foundation in Hard-rock by blasting including trimillimetering and leveling the bed by chiselling where necessary and removing the excavated material and stacking it in measurable heaps within a distance of 50 metres from the building area including dewatering and back filling with available earth/murum watering, ramillimetering excetra. complete. (Lift from 1.5meter To 3.0 meter) By Mechanical Means

Excavation for foundation in Hard-rock by blasting including trimillimetering and leveling the bed by chiselling where necessary and removing the excavated material and stacking it in measurable heaps within a distance of 50 metres from the building area including dewatering and back filling with available earth/murum watering, ramillimetering excetra. complete. (Lift from 3 meter To 4.5meter) By Mechanical Means

Excavation for foundation in Hard-rock by blasting including trimillimetering and leveling the bed by chiselling where necessary and removing the excavated material and stacking it in measurable heaps within a distance of 50 metres from the building area including dewatering and back filling with available earth/murum watering, ramillimetering excetra. complete. (Lift from 4.5 meter To 6 meter) By Mechanical Means

Providing preconstructional antitermite treatment as per Indian Standards 6313 (Part-II) by treating the bottom surface and sides of excavation at the rate of 5 litres of emulsion concentrate of 1.0 percent of chlorophyrifos per square meter of surface area covering 10 years guarantee on bond paper.

Providing preconstructional antitermite treatment as per Indian Standards 6313 (Part-II) treatment by treating the backfill in imillimeterediate contact with foundation at the rate of 5 litres of emulsion concentrate of 1.0 percent of clorophyrifos per square metre of vertical surface area covering 10 years guarantee on bond paper.

Providing preconstructional antitermite treatment as per Indian Standards 6313 (Part-II) by treating the top surface of plinth filling at the rate of 5 litres of emulsion concentrate at 1.0 percent of clorophyrifos per squaremetre of surface area covering ten years guarantee on bond paper.

Filling in plinth and floors with approved excavated material in 15centimeter. to 20centimeter. Layers including watering and compacting excetra. complete.

Filling in plinth and floors with contractors material/brought from outside and approved by Engineer incharge in layers of 15 centimeter to 20 centimeter including watering and compaction excetra.complete.

Providing dry/ trap/ granite/ quartzite/ gneiss rubble stone soling 15 centimeter to 20 centimeter thick including hand packing and compacting excetra. complete.

Providing soling using 80 milimeter size trap metal in 15 cm. layer including filling voids with Crushed sand/grit, ramillimetering, watering excetra. complete.

Providing and laying Cast in situ/Ready Mix cement concrete in M-10 of trap/ granite/ quartzite/ gneiss metal for foundation and bedding including bailing out water, Steel centering, formwork, laying/pumping, compacting, roughening them if special finish is to be provided, finishing if required and curing complete, with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/concrete Batch mix plant (Pan mixer) excetra. complete. With fine aggregate (Crushed sand VSI Grade)

Providing and laying Cast in situ/Ready Mix cement concrete in M15 of trap/ granite/quartzite/gneiss metal for steps including steel centering, formwork, laying/pumping, compacting, roughening them if special finish is to be provided, finishing uneven and honeycombed surface and curing excetra. complete. The Cement Mortar 1:3 plaster is considered for rendering uneven and honeycombed surface, only. Newly laid concrete shall be covered by gunny bag, plastic, tarpaulin excetra. (Wooden centering will not be allowed.),with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/concrete Batch mix plant (Pan mixer) excetra. complete. With fine aggregate (Crushed sand VSI Grade)

Providing and laying Cast in situ/Ready Mix cement concrete M-25 of trap / granite/quartzite/ gneiss metal for Reinforced Cement Concrete work in foundations like raft, strip foundations, grillage and footings of Reinforced Cement Concrete columns and steel stanchions excetra. including bailing out water, Steel centering, formwork ,cover blocks, laying/pumping, compaction and curing roughening the surface if special finish is to be provided (Excluding reinforcement and structural steel) excetra. complete, with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) excetra. complete. With fine aggregate (Crushed sand VSI Grade)

Providing and laying Cast in situ/Ready Mix cement concrete M-30 of trap / granite/quartzite/ gneiss metal for Reinforced Cement Concrete work in foundations like raft, strip foundations, grillage and footings of Reinforced Cement Concrete columns and steel stanchions excetra. columns as per detailed designs and drawing or as directed including Steel centering formwork, cover blocks laying/pumping, compaction finishing the formed surfaces with cement mortar 1:3 of sufficient minimum thickness to give a smooth and even surface or roughening if special finish is to be provided and curing excetra. complete. (Excluding reinforcement and structural steel). with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) excetra. complete. With fine aggregate (Crushed sand VSI Grade) Basement floor

Ground floor

Providing and laying Cast in situ/Ready Mix cement concrete M-30 of trap / granite /quartzite/ gneiss metal for R.C.C. columns as per detailed designs and drawing or as directed including steel centering, formwork,cover blocks, laying/pumping, compaction finishing the formed surfaces with cement mortar 1:3 of sufficient minimum thickness to give a smooth and even surface or roughening if special finish is to be provided and curing etc. complete,(Excluding reinforcement and structural steel). with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand VSI Grade) Ground floor

First floor

Second floor

Third floor

Fifth floor

Sixth floor

Seventh floor

Eighth floor

Nineth floor

Tenth floor

Eleventh floor

Twelth floor

Terrace floor

Providing and laying Cast in situ/Ready Mix cement concrete M-35 of trap / granite/quartzite/ gneiss metal for Reinforced Cement Concrete columns as per detailed designs and drawing or as directed including steel centering, formwork, cover blocks, laying/pumping, compaction finishing the formed surfaces with cement mortar 1:3 of sufficient minimum thickness to give a smooth and even surface or roughening if special finish is to be provided and curing excetra. complete,(Excluding reinforcement and structural steel).with fully automatic micro processor based PLC without SCAD Aenabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) excetra. complete. With fine aggregate (Crushed sand VSI Grade) Basement floor

Ground floor

First floor

Second floor

Third floor

Fourth floor

Providing and laying Cast in situ/Ready Mix cement concrete M-40 of trap / granite/quartzite/ gneiss metal for Reinforced Cement Concrete columns as per detailed designs and drawing or as directed including steel centering, formwork, cover blocks, laying/pumping, compaction finishing the formed surfaces with cement mortar 1:3 of sufficient minimum thickness to give a smooth and even surface or roughening if special finish is to be provided and curing excetra. complete,(Excluding reinforcement and structural steel).with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) excetra. complete. With fine aggregate (Crushed sand VSI Grade) Ground floor

First floor

Second floor

Third floor

Fourth floor

Fifth floor

Providing and laying Cast in situ/Ready Mix cement concrete M-20 of trap / granite/quartzite/ gneiss metal for Reinforced Cement Concrete beams and lintels as per detailed designs and drawings or as directed including steel centering, formwork, cover blocks, laying/pumping, compactionand roughening the surface if special finish is to be provided and curing excetra. complete. (Excluding reinforcement and structural steel). with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) excetra. complete. With fine aggregate (Crushed sand VSI Grade) Basement Floor

Ground floor

First floor

Second floor

Third floor

Fourth floor

Fifth floor

Sixth floor

Seventh floor

Eighth floor

Nineth floor

Tenth floor

Eleventh floor

Twelveth floor

Terrace floor

Providing and laying Cast in situ/Ready Mix cement concrete M-30 of trap / granite/quartzite/ gneiss metal for Reinforced Cement Concrete beams and lintels as per detailed designs and drawings or as directed including steel centering, formwork, cover blocks, laying/pumping, compactionand roughening the surface if special finish is to be provided and curing excetra. complete. (Excluding reinforcement and structural steel).with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) excetra. complete. With fine aggregate (Crushed sand VSI Grade) Ground floor

First floor

Second floor

Third floor

Fifth floor

Sixth floor

Seventh floor

Eighth floor

Nineth floor

Tenth floor

Eleventh floor

Twelveth floor

Terrace floor

Providing and laying Cast in situ/Ready Mixcement concrete M-35 of trap / granite /quartzite/ gneiss metal for Reinforced Cement Concrete beams and lintels as per detailed designs and drawings or as directed including steel centering, formwork, cover blocks, laying/pumping, compactionand roughening the surface if special finish is to be provided and curing excetra. complete. (Excluding reinforcement and structural steel).with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) excetra. complete. With fine aggregate (Crushed sand VSI Grade) Basement Floor

Ground floor

First floor

Second floor

Third floor

Fourth floor

Providing and laying Cast in situ/Ready Mix cement concrete M-40 of trap / granite /quartzite/ gneiss metal for Reinforced Cement Concrete beams and lintels as per detailed designs and drawings or as directed including steel centering, formwork, cover blocks, laying/pumping, compactionand roughening the surface if special finish is to be provided and curing excetra. complete. (Excluding reinforcement and structural steel). with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) excetra. complete. With fine aggregate (Crushed sand VSI Grade) Ground floor

First floor

Second floor

Third floor

Fourth floor

Fifth floor

Providing and laying Cast in situ/Ready Mix cement concrete M-30 of trap/ granite / quartzite/ gneiss metal for Reinforced Cement Concrete slabs and landings as per detailed designs and drawings including steel centering, formwork, cover blocks, laying/pumping, compaction finishing the formed surfaces with cement mortar 1:3 of sufficient minimum thickness to give a smooth and even surface or roughening if special finish is to be provided and curing excetra. complete,(Excluding reinforcement and structural steel).with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) excetra. complete. With fine aggregate (Crushed sand VSI Grade) Ground floor

First floor

Second floor

Third floor

Fifth floor

Sixth floor

Seventh floor

Eighth floor

Nineth floor

Tenth floor

Eleventh floor

Twelevth floor

Terrace floor

Providing and laying Cast in situ/Ready Mix cement concrete M-35 of trap/ granite / quartzite/ gneiss metal for Reinforced Cement Concrete slabs and landings as per detailed designs and drawings including steel centering, formwork, cover blocks, laying/pumping, compaction finishing the formed surfaces with cement mortar 1:3 of sufficient minimum thickness to give a smooth and even surface or roughening if special finish is to be provided and curing excetra. complete,(Excluding reinforcement and structural steel). with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) excetra. complete. With fine aggregate (Crushed sand VSI Grade) Basement Floor

Ground floor

First floor

Second floor

Third floor

Fourth floor

Providing and laying Cast in situ/Ready Mix cement concrete in M-40 of trap / quartzite /granite /gneiss metal for Reinforced Cement Concrete Waist slab, and steps of staircases as per detailed design and drawings or as directed including steel centering, plywood/ steel formwork, steel props, laying/pumping, compaction, finishing uneven and honeycombed surface with cement morta1:3 of sufficient minimum thickness to give a smooth and even surface or roughening the surface if special finish is to be provided and curing excetra. complete. (Excluding einforcement, including cover block).(Newly laid concrete shall be covered by gunny bag, plastic, tarpaulin excetra.) with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) excetra. complete. With fine aggregate (Crushed sand VSI Grade) Ground floor

First floor

Second floor

Third floor

Fourth floor

Fifth floor

Providing and laying Cast in situ/Ready Mix cement concrete in M-30 of trap / quartzite /granite /gneiss metal for Reinforced Cement Concrete Waist slab, and steps of staircases as per detailed design and drawings or as directed including steel centering, plywood/ steel formwork, steel props, laying/pumping, compaction, finishing uneven and honeycombed surface with cement morta 1:3 of sufficient minimum thickness to give a smooth and even surface or roughening the surface if special finish is to be provided and curing excetra. complete. (Excluding einforcement, including cover block).(Newly laid concrete shall be covered by gunny bag, plastic, tarpaulin excetra.) with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) excetra. complete. With fine aggregate (Crushed sand VSI Grade) Basement floor

Ground floor

First floor

Second floor

Third floor

Fourth floor

Fifth floor

Sixth floor

Seventh floor

Eighth floor

Nineth floor

Tenth floor

Eleventh floor

Twelveth floor

Providing and laying Cast in situ/Ready Mix cement concrete in M-40 of trap/ granite/ quartzite/ gneiss metal for Reinforced Cement Concrete pardi of required thickness including steel centering, formwork, cover blocks, laying/pumping, compacting and roughening them if special finish is to be provided and curing complete. (Excluding reinforcement and structural steel).with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) excetra. complete. With fine aggregate (Crushed sand VSI Grade) Ground floor

First floor

Second floor

Third floor

Fourth floor

Fifth floor

Providing and laying Cast in situ/Ready Mix cement concrete in M-30 of trap/ granite/ quartzite/ gneiss metal for Reinforced Cement Concrete pardi of required thickness including steel centering, formwork, cover blocks, laying/pumping, compacting and roughening them if special finish is to be provided and curing complete. (Excluding reinforcement and structural steel).with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) excetra. complete. With fine aggregate (Crushed sand VSI Grade) Basement floor

Ground floor

First floor

Second floor

Third floor

Fourth floor

Fifth floor

Sixth floor

Seventh floor

Eighth floor

Nineth floor

Tenth floor

Eleventh floor

Twelveth floor

Terrace floor

Providing and laying Cast in situ/Ready Mix cement concrete M-40 of trap/ granite / quartzite/ gneiss metal for Reinforced Cement Concrete slabs and landings as per detailed designs and drawings including steel centering, formwork, cover blocks, laying/pumping, compaction finishing the formed surfaces with cement mortar 1:3 of sufficient minimum thickness to give a smooth and even surface or roughening if special finish is to be provided and curing excetra. complete,(Excluding reinforcement and structural steel).with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) excetra. complete. With fine aggregate (Crushed sand VSI Grade) Ground floor

First floor

Second floor

Third floor

Fourth floor

Fifth floor

Providing and laying Cast in situ/Ready Mix cement concrete in M-25 of trap/ granite/ quartzite/ gneiss metal for Reinforced Cement Concrete pardi of required thickness including steel centering, formwork, cover blocks, laying/pumping, compacting and roughening them if special finish is to be provided and curing complete. (Excluding reinforcement and structural steel).with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) excetra. complete. With fine aggregate (Crushed sand VSI Grade) Ground floor

Providing and laying Cast in situ/Ready Mix cement concrete in M-20 of trap/ granite/ quartzite/ gneiss metal for Reinforced Cement Concretecoping to plinth or parapet and sill of doors and windows moulded as per detailed drawings or chamfered as approved by the Engineer including steel centering, formwork, cover blocks, laying/pumping, compacting , curing , finishing and roughening them if special finish is to be provided and curing complete. (Excluding reinforcement and structural steel).with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) excetra. complete. With fine aggregate (Crushed sand VSI Grade) Basement Floor

Ground floor

First floor

Second floor

Third floor

Fourth floor

Fifth floor

Sixth floor

Seventh floor

Eighth floor

Nineth floor

Tenth floor

Eleventh floor

Twelveth floor

Terrace floor

Providing and laying Cast in situ/Ready Mixcement concrete M-25 of trap/ granite/ quartzite/ gneiss metal for Reinforced Cement Concrete chajja as per detailed design and drawings including steel centering, formwork, cover blocks, laying/pumping, compacting and roughening the surface if special finish is to be provided and curing complete. (Excluding reinforcement and structural steel). with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) excetra. complete. With fine aggregate (Crushed sand VSI Grade) Ground floor

First floor

Second floor

Third floor

Fourth floor

Fifth floor

Sixth floor

Seventh floor

Eighth floor

Nineth floor

Tenth floor

Eleventh floor

Twelveth floor

Terrace floor

Providing and fixing in position Thermo Mechanically Twisted - FE - 500 bar reinforcement of various diameters for Reinforced Cement Concrete pile caps, footings, foundations, slabs, beams columns, canopies, staircase, newels, chajjas, lintels pardis, copings, fins, arches excetra. as per detailed designs, drawings and schedules. including cutting, bending, hooking the bars, binding with wires or tack welding and supporting as required complete. Basement Floor

Ground floor

First floor

Second floor

Third floor

Fourth floor

Fifth floor

Sixth floor

Seventh floor

Eighth floor

Nineth floor

Tenth floor

Eleventh floor

Twelveth floor

Terrace floor

Providing fly ash brick masonry with conventional / India Standard type fly ash bricks in Cement mortar 1:6 in foundation and plinth including bailing out water manually striking joints, racking out joints watering and scaffolding excetra. complete. Basement Floor

Ground floor

Providing Autoclaved Aerated Concrete Block masonary of conforming to India Standard :2185 (Part 3) - 1984 in extra fine jointing mortar of fixoblock of UltraTech or equivalent in superstructure including striking joints, raking out joints and scaffolding excetra. Complete. (The test shall be carried out conforming to IS:6441 (Part I) - 1972) Basement Floor

Ground floor

First floor

Second floor

Third floor

Fourth floor

Fifth floor

Sixth floor

Seventh floor

Eighth floor

Nineth floor

Tenth floor

Eleventh floor

Twelveth floor

Terrace floor

Providing Autoclaved Aerated Concrete Block masonary of conforming to Indian Standard :2185 (Part 3) - 1984 in extra fine jointing mortar of fixoblock of UltraTech or equivalent in Half brick thick wall including striking joints, raking out joints and scaffolding excetra. Complete. (The test shall be carried out conforming to IS:6441 (Part I) - 1972) Ground floor

First floor

Second floor

Third floor

Fourth floor

Fifth floor

Sixth floor

Seventh floor

Eighth floor

Nineth floor

Tenth floor

Eleventh floor

Twelveth floor

Providing sand faced plaster externally in cement mortar using approved screened sand, in all positions including base coat of 15 milimeter thick in cement mortar 1:4 using waterproofing compound at 1Kilogramper cement bag curing the same for not less than 2 days and keeping the surface of the base coat rough to receive the sand faced treatment 6 to 8 millimeter thick in cement mortar 1:4 finishing the surface by taking out grains and curing for fourteen days scaffolding excetra.complete. Basement Floor

Ground floor

Providing and applying gypsum plaster ( with Gypsum material ) with finishing with gypsum material in 10 to 13 millimeter thickness to previously plastered surface / or on newly brick surface ( Excluding rough cast plaster ) in all position including preparing and Finishing the surface scaffolding excetra.complete. Basement Floor

Ground floor

First floor

Second floor

Third floor

Fourth floor

Fifth floor

Sixth floor

Seventh floor

Eighth floor

Nineth floor

Tenth floor

Eleventh floor

Twelveth floor

Terrace floor

Providing waterproof plaster in W.C. and bath 12 millimeter thick for dado in cement mortar 1:3 with neat finishing, floating using waterproofing compound at the rate of 1 Kilogram. per bag of cement of approved make and manufacturer and curing excetra. complete. (Excluding Tiles) (As directed by Engineer in Charge) Ground floor

First floor

Second floor

Third floor

Fourth floor

Fifth floor

Sixth floor

Seventh floor

Eighth floor

Nineth floor

Tenth floor

Eleventh floor

Twelveth floor

Providing internal cement plaster 12millimeter thick in single coat in cement mortar 1:3 without neeru finish to concrete or brick surfaces, in all position including scaffolding and curing excetra. complete. Ground floor

First floor

Second floor

Third floor

Fourth floor

Fifth floor

Sixth floor

Seventh floor

Eighth floor

Nineth floor

Tenth floor

Eleventh floor

Twelveth floor

Terrace floor

Providing internal / external 20 millimeter thick Ready Mix plaster confirming to Indian Standard :4031(Part-4) 1988 and IS 383- 1970 in a single coat using Cement mortar of proportion 1:4 containing special type of polymer additives about 0.4%, to all type of surfaces in all positions including scaffolding and curing complete Basement Floor

Ground floor

First floor

Second floor

Third floor

Fourth floor

Fifth floor

Sixth floor

Seventh floor

Eighth floor

Nineth floor

Tenth floor

Eleventh floor

Twelveth floor

Terrace floor

Providing and fixing chicken mesh of 22 gauge, with about 30 centimeter. width at the junction of Reinforced Cement Concrete members and brick work, of approved quality including fixing mesh in position by necessary drilling in concrete /Burn.Brick.masonry and or tying by binding wire excetra. complete. Basement Floor

Ground floor

First floor

Second floor

Third floor

Fourth floor

Fifth floor

Sixth floor

Seventh floor

Eighth floor

Nineth floor

Tenth floor

Eleventh floor

Twelveth floor

Terrace floor

Providing and applying Royale Luxury Emulsion of approved make on internal wall surface as detailed below Scrapping for surface with emery paper and wipe clean for area. wall primer with brush by adding mineral turpentine oil by 8 to 10 % or water by 15 to 20% allowing to dry for 6 to 8 hoursAfter applying acrylic wall putty with appropriate prpportion of water of allow to dry for period of 4 to 6 hours of activity. Scrapping with emery paper and wipe clean Applying paints Royale Luxury emulsion 1st coat with brush water content water 40 to 45% or 65 to 70% by role Applying paints Royale luxury emulsion 2nd coat with brush with water content 40 to 45% or 65 to 70 % by roller. (With prior approval of S.E.) Basement Floor

Ground floor

First floor

Second floor

Third floor

Fourth floor

Fifth floor

Sixth floor

Seventh floor

Eighth floor

Nineth floor

Tenth floor

Eleventh floor

Twelveth floor

Terrace floor

Providing and applying two coats Apex Ultima Puranature Anti-Pollution Or equivalent approved brand, paint should decomposes organic substances and inorganic gases(NOx, VOC‘s, CO, SOx, formaldehydes, excetra.) in presence of natural or artificial light. It contains Graphene and nanoparticles of titanium oxide. and Absorbs CO2 (4.8 Kilogram/15 l). plaster crack should be filled by Acrylic base Crack seal/Textured Crack filler, Paint has to applied on one coat of Apex Ultima Puranature Anti-Pollution Primer or Equivalent. Warranty Should be given by the Manufaturer The work should be done by the Manufacturer Recomillimeterended applicator and he should be able to furnish stage wise onsite technical reports from the concerned company technologist. Basement Floor

Ground floor

First floor

Second floor

Third floor

Fourth floor

Fifth floor

Sixth floor

Seventh floor

Eighth floor

Nineth floor

Tenth floor

Eleventh floor

Twelveth floor

Terrace floor

Providing and applying two coats of High Albedo paint having minimum Solar Reflective Index (SRI) 108 (with solar reflectance & thermal emittance tested as per ASTM) C 1549 and ASTM C 1371 respectively, VOC less than 10 cc/gm. The coating thickness and the methodology of application shall strctly as per manufacturer's specifitions and as approved by engineer in charge. Surface preparation includes cleaning with metal wire brush to remove all dust, fungus excetra, washing with water all complete.The contractor shall give guarantee for the performance of SRI and also the durabitity of coating, all complete as per direction of Engineer - in- incharge. First floor

Third floor

Fourth floor

Terrace floor

Providing cement based water proofing treatment to terraces (Indian water proofing or alike) with brick bats laid in required slope to drain the water for any span after cleaning the base surface. Applying a coat of cement slurry admixed with approved water proofing compound and laying the brick bats on bottom layer in Cement Mortar1:5 admixed with approved water proofing compound filling up to half depth of brick bats, curing this layer for 3 days, applying cement slurry over this layer joints of brick bats with Cement Mortar1:3 admixed with approved water proofing compound and finally top finishing with average 20 millimeter. thick layers of same mortar added with jute fiber at 1Kilogramper bag including finishing the surface smooth with cement slurry admixed with approved water proofing compound. Marking finished surface with false squares of 300millimeter x 300 millimeter. making the junctions at the parapet rounded and tapered top for required height, with drip mould at the junction of plaster and parapet and curing and covering 10 years Guarantee against leakproofness on Court fee stamp paper of Rs. 500/- including ponding test excetra. complete. First floor

Third floor

Fourth floor

Terrace floor

Providing waterproofing in W.C. and bath including brick bat coba in all position including providing and laying 12millimeter bedding in cement mortor 1:3 on vergin concrete slab with waterproofing compound @ 1Kilogram/per bag of cement laying brick bat coba of required thickness in centimeter 1:5 with waterproofing compound 1 Kilogram/bag of cement grouting and finishing the top layer with 20millimeter thick brick bedding in cm mortor 1:3 with waterproofing compound 1 Kilogram/per bag of cement and testing the treated portion for 48 hours by pond test and covering ten years' guarantee on requisite stamp paper including curing excetra.complete. Ground floor

First floor

Second floor

Third floor

Fourth floor

Fifth floor

Sixth floor

Seventh floor

Eighth floor

Nineth floor

Tenth floor

Eleventh floor

Twelveth floor

Providing and applying water proofing treatment using acrylic polymer modified cement based water proofing coating with fibre glass mesh mixing at the rate of powder to liquid (2:1) by weight covering 9 to 10 Square Metre /Kilogram with two coat using approved chemicals for masonry and concrete surface by brush covering 7 years guarantee on Stamp Papers excetra. complete. Basement Floor

Ground floor

First floor

Second floor

Third floor

Fourth floor

Fifth floor

Sixth floor

Seventh floor

Eighth floor

Nineth floor

Tenth floor

Eleventh floor

Twelveth floor

Terrace floor

Providing and fixing 20 to 25 millimeter thick rough shahabad box type waterproofing for basement or underground floor on a base of Cement concrete 1:3:6, including sub base of 2.50 centimeter thick Cement mortar 1:3 with conceal, secrete (RMW), Algae proof or other alike waterproofing liquids, raking of joints upto 35 millimeter depth, filling the joints with 6 millimeter size crushed metal, hand grouting with cement slurry, curing and cleaning, with 7 years guarantee on court fee stamp of Rs. 100/- with ponding test excetra complete. (excluding Cement concrete 1:3:6 base concrete ) Ground floor

Providing and fixing 20 to 25 millimeter thick rough shahabad box type waterproofing treatment to vertical outside faces of Reinforced Cement concrete walls of basement or underground floor including filling the gap of 25 millimeter between rough shahabad and Reinforced Cement Concrete walls with cement grout mixed with water proofing liquid Algae proof or other alike with one tile lift method, brushing the joints horizontally with cement slurry mixed with water proofing liquid for width 30 to 35 millimeter and sloping coping over topmost tile with cement mortar 1:3, butting the bottom most with Cement concrete 1:2:4 mixed with water proofing liquid, curing, with 7 years guarantee on court fee stamp of Rs.100/- with ponding test excetra complete. (excluding Cement concrete 1:3:6 base concrete) Ground floor

Providing and laying vitrified matt/antiskid fininsh tiles having size 590 millimeter to 605 millimeter x to 605 millimeter of 8 to 10 millimeter thickness and confirming IS. 15622-2006 (Group Bla) of approved make, shade and pattern for flooring in required position laid on a bed of 1:4 cement morar including neat cement float, filling joints, curing and cleaning excetra. complete. Ground floor

First floor

Second floor

Third floor

Fourth floor

Fifth floor

Sixth floor

Seventh floor

Eighth floor

Nineth floor

Tenth floor

Eleventh floor

Twelveth floor

Providing and laying vitrified matt/antiskid finish tiles having size 590 millimeter to 605 millimeter x to 605 millimeter of 8 to 10 millimeter thickness and confirming IS. 15622-2006 (Group Bla) of approved make, shade and pattern for dado and skirting in required position fixed in 1:4 cement mortar including neat cement float, filling joints,curing and cleaning excetra. complete Ground floor

First floor

Second floor

Third floor

Fourth floor

Fifth floor

Sixth floor

Seventh floor

Eighth floor

Nineth floor

Tenth floor

Eleventh floor

Twelveth floor

Providing and laying in position flooring of telephone black / Amba White / Cat bary brown / Ruby red / Ocean Brown granite stone of approved shade and size 18 millimeter to 20 millimeter thick on bed 1:6 cement mortar including cement floats striking joints, pointing in Cement Mortar 1:3 curing and cleaning excetra. complete. Basement Floor

Ground floor

First floor

Second floor

Third floor

Fourth floor

Fifth floor

Sixth floor

Seventh floor

Eighth floor

Nineth floor

Tenth floor

Eleventh floor

Twelveth floor

Providing and fixing machine cut machine polished 18 millimeter to 20millimeter thick telephone black / Amba White / Cat bary brown / RBI red / Ocean Brown granite stone for treads and risers of steps and staircases of approved colour and shade with full moulding and three grooved line for the treads on bed of 1:4 Cement mortar including float filling joints with neat cement slurry curing polishing and cleaning excetra. complete. Basement Floor

Ground floor

First floor

Second floor

Third floor

Fourth floor

Fifth floor

Sixth floor

Seventh floor

Eighth floor

Nineth floor

Tenth floor

Eleventh floor

Twelveth floor

Terrace floor

Providing leather finished polishing to Granite Stone slab by continuous grinding in 4 coats of different bits to receive rough and matt finish including buffing process before laying and fixing of stone as per drawing and design, including cleaning, washing and finishing excetra. complete. Basement Floor

Ground floor

First floor

Second floor

Third floor

Fourth floor

Fifth floor

Sixth floor

Seventh floor

Eighth floor

Nineth floor

Tenth floor

Eleventh floor

Twelveth floor

Providing and laying telephone black / Amba White / Cadburybrown / Ruby red / Ocean Brown granite stone of 18 to 20 millimeter thick for door frame/ dado/ window boxing excetra. On Cement Mortar 1:6 including filling joints with polymer base filler nosing/moulding the sharp edges wherever necessary, curing, excetra. complete. Basement Floor

Ground floor

First floor

Second floor

Third floor

Fourth floor

Fifth floor

Sixth floor

Seventh floor

Eighth floor

Nineth floor

Tenth floor

Eleventh floor

Twelveth floor

Providing and fixing machine cut mirror polished 18 millimeterto 20 millimeter thick telephone black granite / Amba White / Cat bary brown / RBI red / Ocean Brown granite stone partition with full moulding the edges excetra. complete . Both side polish Ground floor

First floor

Second floor

Third floor

Fourth floor

Providing and laying machine cut machine Polished Kota stone flooring 25millimeter to 30millimeter thick and required width in plain/ diamond pattern on bed of 1:6 Cement Mortar. including cement float, filling joints with neat cement slurry, curing, polishing and cleaning excetra. complete. Basement Floor

Ground floor

First floor

Second floor

Third floor

Fourth floor

Providing and fixing in required position skirting or dado of polished Kotah Stone slab 25 millimeter to 30 millimeter thick fixed on base on plaster of cement mortar 1:4 including cement float, filling joints with cement slurry, curing rubbing, polishing and cleaning complete. Basement Floor

Ground floor

First floor

Second floor

Third floor

Fourth floor

Providing and laying matt finish ceramic tiles of having size 30 centimeter x 30 centimeter confirming to Indian Standard15622/2006 (group D II-A) and 7 millimeter to 8 millimeter thick for flooring in required position laid on a bed of 1:4 cement mortar including cement float, filling joint with white/colour cement slurry cleaning curing excetra. complete. Ground floor

Third floor

Fourth floor

Providing and laying ceramic tiles of having size 30 centimeter. x 30 centimeter. and confirming to corresponding Indian Standard for dado and skirting in required position with readymade adhesive mortar of approved quality on plaster of 1:2 cement mortar including joint filling with white/ colour cement slurry cleaning curing excetra. complete. Ground floor

Third floor

Fourth floor

Providing & Fixing in position, Carpet more than 800+ gsm, made with100% stain proof fibres of approved make along with 5millimeter underlay as per Architectural & Acoustical Design & Instructions & Complete in all aspects including all materials labour,finishing excetra complete Ground floor

Third floor

Fourth floor

Providing and fixing heavy duty inter locking concrete Coloured paving blocks of 80 millimeter thickness of having a strength of 300 Kilogram/Sq.cm. of approved quality and shape on a bed of crushed sand of 25 to 30 millimeter thick including skirting joints and cleaning excetra. complete

Providing and constructing granite kitchen platform with fixing of stainless steel sink 600millimeter x 450 millimeter size as per detailed drawing including vertical both side polished kadappah stone 25 to 30 millimeter thick supports with kadappah top 35 to 40 millimeter thick and polished granite 16 to 20 millimeter top with side strips of granite at front and both sides of platform raised with two vertical granite supports 15 cm height and top granite of 75 x 40 centimeter including cutting, opening for sink of required size in kadappah as well as granite excetra. complete. (Platform top size 5.00 meter x 0.60 meter and height is 0.75 meter) Ground floor

First floor

Second floor

Third floor

Fourth floor

Bamboowood 14millimeter thick Tile Flooring including quarter round & door reducer - Providing & fixing in position Phenol bonded Epitome Bamboowood flooring with planks of sizes 14millimeter thick, 1800millimeter length (minimum) and 130millimeter wide (minimum), in approved colour, texture and finish, having Performance Appraisal Certificate (PAC) issued by Building materials & Technology Promotion Council (BMTPC). The flooring shall be fixed with tongue and groove interlocaking system, with 2millimeter underlay as sound abrobing and moisture barrier and underlayment of 4millimeter thick expanded poly ethylene foam sheets having density 40Kilogram/cum, over prepared surface with necessary quarter round planks of size 1900millimeterx 18millimeter and dorr reducer of size 1900millimeter x 44millimeter, wherever required. The Epitome Bamboowood planks shall have minimum density of 1000 Kilogram/cum & minimum Hardness 1000 Kilogramf. with Eco friendly UV coating, all complete as per direction of Engineer in-charge Fourth floor

Bamboowood 14millimeter thick wall Skirting - Providing & fixing in position Phenol bonded Epitome Bamboowood in wall skirting with planks of sizes 14millimeter thick, 1900millimeter length (minimum) and 85millimeter wide (minimum), in approved colour, texture and finish, having Performance Appraisal Certificate (PAC) issued by Building materials & Technology Promotion Council (BMTPC). The skirting shall be fixed SS screws & rawl plugs, over underlayment of 4millimeter thick expanded poly ethylene foam sheets having density 40Kilogram/cum, over prepared surface. The Epitome Bamboowood planks shall have minimum density 1000 Kilogram/cum & minimum Hardness 1000 Kilogramf. with Eco friendly UV coating, all complete as per direction of Engineer in-charge Fourth floor

Providing and fixing 30millimeter thick SOLID PANEL Poly vinyl Chloride INTERNAL DOOR SHUTTER consisting of frame made out of M.S. tubes of 19 gauge thickness and size of 40millimeter x 20millimeter for stiles ,top, lock and bottom rails. M.S. frame shall have a coat of steel primers of approved make and manufacture. M.S. frame shall be covered with 5millimeter thick heat molded Poly vinyl Chloride channel of size 30 x 100millimeter forming stiles, and 5millimeter thick, 125millimeter wide Poly vinyl Chloride sheets for top rail, lock rail and bottom rail on either side, and 15millimeter (5millimeter x 3) thick, 20millimeter wide cross Poly vinyl Chloride sheet as gap insert for top rail and bottom rail. Paneling of 10 millimeter thick prelam Poly vinyl Chloride sheet to be fitted in the M.S. frame welded / sealed to the stiles and rails with 30millimeter wide x 5millimeter thick Poly vinyl Chloride sheet beading on either side, and joined together with solvent cement adhesive excetra. An additional 5millimeter thick Poly vinyl Chloride strip of 20millimeterwidth is to be stuck on the interior side of the C Channel using Poly vinyl Chloride solvent cement adhesive. including stainless steel fixtures and fastening Complete as per direction of Engineerincharge,manufacturer'sspecification and drawing. Ground floor

First floor

Second floor

Third floor

Fourth floor

Fifth floor

Sixth floor

Seventh floor

Eighth floor

Nineth floor

Tenth floor

Eleveth floor

Twelevth floor

Solid Core Flush door Single leaf Providing and fixing factory made solid core flush door in single leaf 35 millimeter thick, decorative types, of exterior grade, as per detailed drawings, conforming to Indian Standard :2202 - 1962 (Revised) with approved face veneers on both faces with/without glazing and venetians in the positions shown on the drawings or as directed, all necessary beads, moulding and lipping, holdfasts, mat finish stainless steel fixtures fastenings , finishing with french-polish/ waxing complete. (without door frame).(Sample to be got approved from Ex.Engineer before use) Comillimeterercial Hard Wood shutter Basement floor

Ground floor

First floor

Second floor

Third floor

Fourth floor

Solid Core Flush door Double leaf Providing and fixing factory made solid core flush door shutters in double leaves 35millimeter thick,decorative type of exterior grade, as per detailed drawings, conforming to Indian Standard.: 2202 – 1966 (Revised) including approved face veneers on both sides, without glazing and venetians including mat finish stainless steel fixtures and fastening, stoppers and finishing with french polishing excetra. (Excluding door frame)(Sample to be got approved from Ex. Engineer before use) Comillimeterercial Hard Wood shutter Ground floor

First floor

Second floor

Third floor

Fourth floor

Providing and fixing frame with / without ventilator of size as specified with Country cut teak wood for doors and windows including chamfering, rounding, rebating, iron holdfast of size 300millimeter x 40millimeterx 5millimeter with oil painting, Basement floor

Ground floor

First floor

Second floor

Third floor

Fourth floor

Providing and applying melamine polish of required finish to the wood work by spray machine including knotting and preparing the even surface by scraping, applying French polish , scaffolding if required excetra. complete. Note:The work to be executed on prior approval of Superintending Engineer will be necessary. Basement floor

Ground floor

First floor

Second floor

Third floor

Fourth floor

Providing of 120 min Fire rated lead lined doors system duly tested for 3 criteria - Integrity, Insulation and Stability Criteria as per the IS: 3614 Part 2 and BS: 476 part 22 with standard heating conditions as specified in IS:3614 Part II 1992 and BS: 476 part 20 & 22 1987 to achieve the required integrity, insulation and stability (i.e. to restrict the heat radiation, temperature rise on the non fire side to the maximum of 140° C above the ambient temperature on the exposed surface of the shutter. The fire doors are tested with NCBN technology ("Non Combustible by Nature"). Lead lined to check radiation. Code No; 2 Hour Insulated, Flame, Smoke Radiation check Lead Lined Fire Door 57millimeter 2HR FRL (120/120) 3 Criteria - INTEGRITY / INSULATION/ STABILITY WOODEN DOOR - Fire Door Tested in accordance to IS: 3614 Part 2. a) Door Frame: Providing Frames for Lead Lined Fire resistant door shutters 1st class Malaysian Hardwood Frame densified and pressure treated with fire retardant chemicals in vacuum impregnation vessel under 160 PSI pressure as per IS:401and kiln seasoned to moisture below 15% as per IS:1141 of section 140 X 70 millimeter with 45millimeter thick two layered 3millimeter Lead Line Sheets with 10millimeter overlap from either side & spray quoted with 2 coats of In tumescent paint of minimum 200 micron, with 1 row of Brush- Type Astroflame® intumescent strip (imported) of size 10millimeterx4millimeter concealed in the groove of the Frame for fire and hot and cold smoke sealing, excetra. complete as per direction of Engineer in Charge Ground floor

First floor

Second floor

Third floor

Fourth floor

Fifth floor

Sixth floor

Seventh floor

Eighth floor

Nineth floor

Tenth floor

Eleveth floor

Twelevth floor

Terrace floor

b) Shutter: Providing of 57millimeter thick asbestos free composite, 'TUFWUD' brand - 3 criteria - fire, heat and smoke check Lead Lined Door Shutter with flame guard of 120 minutes IS3614 part -II comprising of 2x9millimeter Calcium Silicate boards, Chemical treated internal timber with Fire retardant chemicals in pressure impregnation vessels under 160 PSI pressure as per IS:401and kiln seasoned to moisture below 15% as per IS:1141 frame work of 100x30 millimeter with 30millimeter thick infill of ceramic fibre (density 128 Kilograms/CMT) vermiculite mix, 3millimeter thick Lead Sheet on one side faced & 3millimeter Fire retardant High Density Fibreboard, internally lipped with hardwood beading, and pasted in Hydraulic Press under 50 tonnes pressure, spray quoted with 2 coats of Intumescent paint of minimum 300 micron, and with 1 row of Brush- Type Astroflame® intumescent strip (imported) of size 10millimeterx4millimeter concealed for fire and smoke sealing in the grooves in the shutter on all edges except bottom, without any external lipping. Ground floor

First floor

Second floor

Third floor

Fourth floor

Fifth floor

Sixth floor

Seventh floor

Eighth floor

Nineth floor

Tenth floor

Eleveth floor

Twelevth floor

Terrace floor

c) Vision Panel: 2 HR rated E Class clear high stress fire rated glass is pre fabricated strategically inside the shutter structure with 10 millimeter inside the shutter on all sides with U- glazing. An additional insulated powdercoated 'Z' channel of 16 swg MS sheet to be fixed for reinforcement of the joints. Ground floor

First floor

Second floor

Third floor

Fourth floor

Fifth floor

Sixth floor

Seventh floor

Eighth floor

Nineth floor

Tenth floor

Eleveth floor

Twelevth floor

Terrace floor

Panic Bar: (For 2 Hr fire Rated single Panic bar) Supplying, fitting & fixing Surface mounted Crash Bar/ panic Bar of touch pad style ,made of heavy duty cast iron/ steel body & latches with SS ,BHMA certified & conforming to ANSI A 156.3 for grade-1 ( 3 hours fire rated ) and suitable for surface mounting to wooden/hollow metal/ Al framed door,with maximum operating force 8Kilogram for unlocking easily & outwardly during emergency,complete in all respect as per direction & satisfaction of Engineer-in charge including all taxes & incidental charges. (Note: To be installed at "FIRE EXIT"only under location specific instruction of Eingineer-in -Charge.) Ground floor

First floor

Second floor

Third floor

Fourth floor

Fifth floor

Sixth floor

Seventh floor

Eighth floor

Nineth floor

Tenth floor

Eleveth floor

Twelevth floor

Terrace floor

Providing and fixing in position powder coated aluminium louvered windows / ventilator of various sizes with powder coating as per detailed drawing and specifications including aluminium frames 80 x 38 millimeter x 1.22 millimeter box type, 5 millimeter thick sheet glass louvers, of approved quality excetra. complete. Ground floor

First floor

Second floor

Third floor

Fourth floor

Fifth floor

Sixth floor

Seventh floor

Eighth floor

Nineth floor

Tenth floor

Eleveth floor

Twelevth floor

Kitchen Trolley Providing and Fixing stainless steel kitchen trolley of overall 26 " height and 22" depth,supported on aluminium pipes ,trolley basket made out of 5 millimeter stainless steel rod fitted on telescopic channel of size 1.5 " x 20 " x 22 " on both sides of trolley of 12 " or above size, panel having 40Kilogramload bearing capacity of trolley made out of 20 millimeter PUC coated plywood and colour combination as directed by E-I-C.Inner side of panel covered by white mica ,100 millimeter s.s. decorative handle.(The width and height of individual compartments shall be kept as directed by Engineer-in-charge) Ground floor

First floor

Providing and Fixing of GI Lay in Plain metal ceiling consisting of 600x600millimeter Lay in tiles of pre coated galvanized steel in 0.5 millimeter thickness in Global white color tile to be laid on grid systems with 15millimeter wide T - section flanges color white having rotary stitching on the Main Runner, 1200 millimeter and 600 millimeterCross Tees.Providing and Fixing of GI Lay in Plain metal ceiling consisting of 600x600millimeter Lay in tiles of pre coated galvanized steel in 0.5 millimeter thickness in Global white color tile to be laid on grid systems with 15millimeter wide T - section flanges color white having rotary stitching on the Main Runner, 1200 millimeter and 600millimeter Cross Tees.products approved as per GRIHA and BS 476 excetra. complete. Ground floor

First floor

Second floor

Third floor

Fourth floor

Fifth floor

Sixth floor

Seventh floor

Eighth floor

Nineth floor

Tenth floor

Eleveth floor

Twelevth floor

Providing and fixing Modular false ceiling of 600 x 600 millimetercenter to center and 13 millimeter thick square mineral fiber board to be fixed on frame work of alluminium sections for suspended false ceiling consisting of alluminium T 2‖x1 ½‖ (50 millimeter x 40 millimeter) weighing 0.39 Kilogram/m at 60 cms center center and fixed with ½‖ x ½‖ (15 x 15millimeter) flanges weighing 0.19 Kilogram/m suspended on 6 millimeter dia mild steel rod weighing 0.22 Kilogram/m, fixed on wall and beams including rounding of the edges with alluinium T of 2‖ x 1 ½‖ (50 millimeterx 40millimeter) weighing 0.39 Kilogram/m excetra. (all alluminium sections shall be anodized) including all labour, material, lifts excetra. complete. First floor

Second floor

Third floor

ACOUSTICAL GLASS FIBRE FALSE CEILING BLADES : Providing and Fixing Acoustical blade which are 40 millimeter thick, flat glass fibre panels with Humidity Resistance RH 90%, with factory fitted embedded metal insert with ¼” – 20 threading for fixing cable adjuster for hanging application. Acoustical blades shall have sizes of 200x1200 millimeter, 200x1600 millimeter, 400x1200millimeter, 400x1600millimeter 400x1800millimeter 500x1200millimeter or 500x1600millimeterwith both side laminated scrim finished with uniform water based paint on all surface (including edges). Acoustical performance of 0.65 NRC(for 400millimeter high x 40millimeterthick baffles with 400millimeter on centre distance and overall depth of construction 1000millimeter) as per ASTM C-423 (Average value of Absorption Co-efficient readings taken at 250 Hz, 500 Hz, 1000 Hz and 2000 Hz) in standard White color with Light reflectance 87% or in the color specified by the Architect (Shell / Tangerine / Cranberry / Moss / Kiwi / Reef / Lagoon), Fire Performance Class B2 – s1, d0 as per EN 13501-1 .The blade shall be made of Glass fibre panel with density of 110-120 kilogram/ m3. SUSPENSION: The panel shall be hung using hanging kit comprising of griper structure anchor & cap of dia 20millimeter, spring loaded bottom end cable adjuster of dia. 9millimeter and 2.4m long aircraft cable of 1/16” dia. The Blade along with suspension system shall carry a 1 year warranty against manufacturing defect and manufacturer shall provide a warranty certificate. The supply shall be backed by a Manufacturing Test Certificate. Suspension System Details Components 1) Griper structure anchor 2) Gripper anchor cap 3) Cable adjuster 4) Aircraft Cable Cable adjuster Spring loaded bottom end cable adjuster of dia. 9millimeter and 45millimeter long Aircraft cable Material Galvanized Steel Aircraft cable dimension 1/16” Ø x 2.4meter Tolerance ±1millimeter. INSTALLATION: Hanger Wire Attachment to Structure: Attach the gripper structure anchor to the structure with an appropriate fastener (1/4"-20 Threading) that will carry the full weight of the blades. Insert the end of the cable into the gripper anchor cap. Screw the gripper anchor cap completely into the gripper structure anchor. Insert Suspension Cables: The panel is to be suspended using the aircraft cables which are suspended from the soffit using the gripper structure anchors and its other end passing through the bottom end cable adjuster. The height & level of the panels can be adjusted using the bottom end cable adjusters. Suspension of Blade: Locate the two factory fitted female inserts on the blades. Suspend the Blades by screwing the bottom end of the cable adjuster into the female inserts. Installation should be carried out as per Manufacturer recomillimeterended procedure. Ground floor

Providing and fixing in position Gypsum board false ceiling with 12.5 millimeter thick Gypsum boards, screwed/fixed to the under structure of suspended G.I. Grid constructed and suspended from the main ceiling consisting of ceiling sections of size 25 x 50 millimeter maximum center to center distance of 600 milimetre perimeter channel and intermediate channels at maximum center to center distance 1200 milimetre galvanized grid should be fixed to reinforced cement concrete slab. The gypsum board should be fixed to galvanized iron grid with necessary screws. The boards should be taped and filled from underside to give smooth, seamless ceiling. The rate should include necessary additional ceiling sections and intermediate channels. Additional intermediate channels should be fixed to strap hangers for additional support to prevent strapping at every 1200 milimetre item to be completed in all respect including necessary sleeves for ducts finishing of joints cut outs, painting including labour, material, lifts excetra. all complete. Ground floor

First floor

Second floor

Third floor

Fourth floor

Fifth floor

Sixth floor

Seventh floor

Eighth floor

Nineth floor

Tenth floor

Eleveth floor

Twelevth floor

Double Faced Mobile Unit for Compactor 2150millimeterH x 2745millimeterW x 900millimeterD Providing and fixing Double Faced Mobile Unit for Compactor 2150millimeterH x 2745millimeterW x 900millimeterD - BASE FRAME : Base Frame shall be fabricated in channel Type from minimum 2.5 millimeter thick MS Sheet Size of Channel 25millimeter x 100millimeter x 45millimeter. GUIDE RAILS : The guide rails shall be made out of 28millimeter Bright bar placed on 1.2 millimeter thick M.S. Plate which will be above the floor and are as per the international standard of safety. SUPER STRUCTURE : Super structure of the Mobile storage system will consist of knock down type panels. All the components such as shelves, front panel, end panel, vertical rear panel, central partition excetra. Will act as an integral member of the Unit. SHELVES : Shelves made of 22SWG thick Prime Quality C.R.C.A. having 10 folds each will be provided each designed to carry a U.D.L. of 70 Kilograms. VERTICAL PANEL : Vertical panel consists of the front, Centre & rear panel shall be made out of 20SWG thick C.R.C.A. Prime quality Mild Steel & designed to take the load of shelves. DRIVE COVER PANEL : Made out of 22SWG thick C. R.C. A. prime quality Steel to cover the entire drive mechanism. CENTRE PARTITION : The Centre partition will comprise of a full C.R.C.A. prime quality Mild Steel 22SWG Sheet. LOCKING : System will be provided with individual rack locking as well as centralised locking arrangement on the last unit when all units are brought together, central lock when operated gets locked with the floor & does not allow access to the units. DRIVE MECHANISM : Driving Mechanism will be provided externally supported on special grade anti-friction bearing to have smooth & effortless movement. Entire mechanism or gear & sprockets shall be incorporated within the front panel provided in the front of the unit within an area of 1000millimeter x 200millimeter x 60millimeter. DRIVING WHEEL : Fully Powder Coated three pronged drive wheel for better torque & free movement of the rack over the guide rail. INDEXING ARRANGEMENT : Acrylic card holders provided on the front panel for easy identification & retrieval. FINAL FINISH : Powder Coating (8 tanks process with 70 microns). First floor

Single Faced Mobile Unit for Compactor 2150millimeterH x 2745millimeterW x 457millimeterD Providing and fixing Single Faced Mobile Unit for Compactor 2150millimeterH x 2745millimeterW x 457millimeterD - BASE FRAME : Base Frame shall be fabricated in channel Type from minimum 2.5 millimeter thick MS Sheet Size of Channel 25millimeter x 100millimeter x 45millimeter.GUIDE RAILS : The guide rails shall be made out of 28millimeter Bright bar placed on 1.2 millimeter thick M.S. Plate which will be above the floor and are as per the international standard of safety.SUPER STRUCTURE : Super structure of the Mobile storage system will consist of knock down type panels. All the components such as shelves, front panel, end panel, vertical rear panel, central partition excetra. Will act as an integral member of the Unit. SHELVES : Shelves made of 22SWG thick C.R.C.A. Prime quality Mild Steel & designed to take the load of shelves. DRIVE COVER PANEL : Made out of 22SWG thick C. R.C. A. prime quality Steel to cover the entire drive mechanism. CENTRE PARTITION : The Centre partition will comprise of a full C.R.C.A. prime quality Mild Steel 22SWG Sheet. LOCKING : System will be provided with individual rack locking as well as centralised locking arrangement on the last unit when all units are brought together, central lock when operated gets locked with the floor & does not allow access to the units. DRIVE MECHANISM : Driving Mechanism will be provided externally supported on special grade anti-friction bearing to have smooth & effortless movement. Entire mechanism or gear & sprockets shall be incorporated within the front panel provided in the front of the unit within an area of 1000millimeter x 200millimeter x 60millimeter. DRIVING WHEEL : Fully Powder Coated three pronged drive wheel for better torque & free movement of the rack over the guide rail. INDEXING ARRANGEMENTPrime Quality C.R.C.A. having 10 folds each will be provided each designed to carry a U.D.L. of 70 Kilograms. VERTICAL PANEL : Vertical panel consists of the front, Centre & rear panel shall be made out of 20SWG thick : Acrylic card holders provided on the front panel for easy identification & retrieval. FINAL FINISH : Powder Coating (8 tanks process with 70 microns). First floor

Single Faced Mobile Unit for Compactor 2150millimeterH x 1830millimeterW x 457millimeterD Providing and fixing Single Faced Mobile Unit for Compactor 2150millimeterH x 1830millimeterW x 457millimeterD - BASE FRAME : Base Frame shall be fabricated in channel Type from minimum 2.5 millimeter thick MS Sheet Size of Channel 25millimeter x 100millimeter x 45millimeter.GUIDE RAILS : The guide rails shall be made out of 28millimeter Bright bar placed on 1.2 millimeter thick M.S. Plate which will be above the floor and are as per the international standard of safety. SUPER STRUCTURE : Super structure of the Mobile storage system will consist of knock down type panels. All the components such as shelves, front panel, end panel, vertical rear panel, central partition excetra. Will act as an integral member of the Unit. SHELVES : Shelves made of 22SWG thick Prime Quality C.R.C.A. having 10 folds each will be provided each designed to carry a U.D.L. of 70 Kilograms. VERTICAL PANEL : Vertical panel consists of the front, Centre & rear panel shall be made out of 20SWG thick C.R.C.A. Prime quality Mild Steel & designed to take the load of shelves. DRIVE COVER PANEL : Made out of 22SWG thick C. R.C. A. prime quality Steel to cover the entire drive mechanism. CENTRE PARTITION : The Centre partition will comprise of a full C.R.C.A. prime quality Mild Steel 22SWG Sheet. LOCKING : System will be provided with individual rack locking as well as centralised locking arrangement on the last unit when all units are brought together, central lock when operated gets locked with the floor & does not allow access to the units. DRIVE MECHANISM : Driving Mechanism will be provided externally supported on special grade anti-friction bearing to have smooth & effortless movement. Entire mechanism or gear & sprockets shall be incorporated within the front panel provided in the front of the unit within an area of 1000millimeter x 200millimeter x 60millimeter. DRIVING WHEEL : Fully Powder Coated three pronged drive wheel for better torque & free movement of the rack over the guide rail. INDEXING ARRANGEMENT : Acrylic card holders provided on the front panel for easy identification & retrieval. FINAL FINISH : Powder Coating (8 tanks process with 70 microns). First floor

Second Floor

Third floor

Providing and fabricating structural steel work in rolled sections like joists, channels, angles, tees excetra. as per detailed design and drawings or as directed including cutting, fabricating, hoisting, erecting, fixing in position making riveted / bolted /welded connections without connecting plates, braces excetra. and including one coat of anticorrosive paint and over it two coats of oil painting of approved quality and shade excetra.complete. Ground floor

Providing structural steel work of rectangular hollow steel section for steel trusses, other similar trussed items like purlin and members with all bracing, gusset plates excetra. as per detailed designs and drawings or as directed including cutting, fabricating, hoisting, erecting, fixing in position making riveted/bolted/ welded connections and one coat of anticorrosive paint and over it two coats of oil painting of approved quality and shade complete. Ground floor

Providing structural steel work in hollow section of various thickness and sizes in square, rectanular and round shape from 25millimeter to 450millimeter section as per Indian StandardS4923 YST 310 Grade produced from iron ore and blast furnace route excetra. as per detailed designs and drawing or as directed including cutting, fabricating, hoisting, erecting, fixing in position, making riveted/bolted/ welded connections and painting complete. Second floor

Third floor

Providing and fixing 900millimeter high S.S.304 Grade Stainless steel railing with 40millimeter diameter and 1.5millimeter thick at top,40millimeter diameter and 1.5millimeter thick vertical supports spaced at 1.5meter center to center and 8millimeter thick toughened glass including fabricating ,fixtures, errecting , necessary welding , grinding ,finishing, buffing to stainless steel pipe excetra. complete First floor

Second floor

Third floor

Fourth floor

Providing and fixing mild steel grill work for windows, ventilators, excetra. 15 Kilogram/Square Metre as per drawing including fixtures necessary welding and painting with one coat of anticorrosive paint and two coats of oil painting complete. Ground floor

First floor

Second floor

Third floor

Fourth floor

Fifth floor

Sixth Floor

Seventh floor

Eighth floor

Nineth floor

Tenth floor

Eleveth floor

Twelevth floor

Providing and laying in situ cement concrete M20 with tremix treatment for 100 millimeter thickness for flooring with groove cutting of 4millimeter wide and 20millimeter deep with necessary refilling with bitumen excetra. complete. Basement floor

Ground floor

Providing & Fixing in position Acoustical Doors along with 150 x 150 millimeter teak wood frame, doors made from 50millimeter Teak wood frame 600 x600 c to c filled with 1000 Gsm synthetic wool 50millimeter thick and 3millimeter Tecsound from both sides, 12millimeter waterproof ply & veneer from both sides , including 150millimeter heavy duty SS hinges (Geze / Dorma or eq.) 4 no each leaf, with Door-closer (Dorma / Geze or eq.) including cost of required Cut-Outs, decorative mouldings / finishing-items / melamine polish & Scaffolding as per Architectural & Acoustical Design & Instructions & Complete in all aspects .including all materials labour,finishing excetra complete Ground floor

Providing and Fixing Soft Fibre Acoustical Suspended Ceiling System with Optra (Bevelled Tegular) Edge Tiles of size 15millimeter Exposed Grid. The tiles should have Humidity Resistance (RH) of 95%, NRC 0.9 - 1.0, Light Reflectance ?85%, Colour White, Fire Performance UK Class 0 / Class 1 (BS 476 pt - 6 &7) in module size of 600 x 600 x 15millimeter , suitable for Green Building application, with Recycled content of 66% GW and 74% RW. The tile shall be laid on precoated G.I channel 32 with 15 millimeter wide T - section flanges colour white having rotary stitching on all T sections i.e. the Main Runner, 1200 millimeter and 600 millimeter Cross Tees with a web height of 32 millimeter and a load carrying capacity of 7 Kilograms/M2 with a minimum pull out strength of 100 Kilograms. The T Sections have a Galvanizing of 90 grams per M2 and need to be installed with Suspension system The Tile and Grid system used together should carry a 10 year warranty. products approved as per GRIHA and BS 476 excetra. complete. Ground floor

ACOUSTICAL WALL PANELLING – FABRIC WRAPPED OF SIZE: 600X600/1200X25millimeter Providing and Fixing of Acoustical Wall Panel with square edges made of fibre glass substrate 25millimeter thick, wrapped on the front side with an acoustically transparent fabric as per the approved shade (Husk, Copper, Sangria, Sesame, Coffee, Charcoal, Titanium, Flame, Peanut and Shell). The panel shall be classified for Fire Class A, as per ASTM E-84. The Acoustical Wall Panel shall be of sizes 600x600millimeter (Nominal) or 600x1200millimeter (Nominal) and shall achieve an NRC of 0.85 (Average value of Absorption Co-efficient readings taken at 250 Hz, 500 Hz, 1000 Hz and 2000 Hz) with 50millimeter airgap as per ASTM C423 to be fixed to wall on a framework of wooden battens and using Wall panel Impalers (supplied by the manufacturer) or by using construction adhesives (as per the instructions laid down by the manufacturer). The fibre glass substrate shall have a recycle content of 85%.Installation:An appropriate vapour barrier (by others) shall be applied/installed on the vertical surface before the installation to properly seal against entry of any moisture. Vapour barrier (by others) shall be installed as per Manufacturer‘s recomillimeterendation. Install wooden batten grid (provided by others) of section 50x50millimeter or as approved by the Architect on the solid wall/partition to provide level and plumb surface. The Impalers shall be fixed to the battens using self-tapping screws, 3 nos. in case of 600x600millimeter and 4 nos. in case of 600x1200millimeter. Silica based construction adhesive (by others) to be dabbed on to the projecting elements (spikes) of the Impalers. Wall Panels shall be pierced through the spikes of the Impalers ensuring the line and level of the panels are maintained Ground floor

First floor

Providing & fixing in position Stage flooring Made from 18millimeter plywood 1200 x 2400 & 18millimeter Teakwood planks 100 x 800 having tongue & grove on Sal-wood frame of 50 x 100 at 600millimeter c to c on stage surface including cost of required Cut-Outs, decorative mouldings / finishing-items / polish excetra., as per Architectural & Acoustical Design & Instructions & Complete in all aspects. .including all materials labour,finishing excetra complete Ground floor

Providing, laying, spreading and compacting stone aggregates of specific sizes to water bound macadam specification including spreading in uniform thickness, hand packing to proper grade and camber, applying and brooming requisite type of screening/ binding Materials to fill up the interstices of coarse aggregate, watering and compacting with Vibratory roller. to the required density. By Mechanical Means - Grading I (Using Screening Type A (13.2) millimeter Aggregate)

Providing, laying, spreading and compacting stone aggregates of specific sizes to water bound macadam specification including spreading in uniform thickness, hand packing to proper grade and camber, applying and brooming requisite type of screening/ binding Materials to fill up the interstices of coarse aggregate, watering and compacting with vibratory roller to the required density. By Mechanical Means - Grading II (Using Screening Type B (11.2 millimeter) Aggregate)

Providing and constructing 75 millimeter. thick Modified Penetration Macadam (MPM) road surface including all materials, preparing the existing road surface, spreading 40 millimeter. stone metal layers 100% crusher broken metal with conical crusher plant heating and spraying the bitumen of specified grade @ 2 kilogram/sqm, spreading 12 millimeter.size chips compacting with three wheel static roller having weight 8 to 10 MT. to achive the desired degree of compaction as per Technical Specification Clause 506 excetra. complete. Including picking of existing WBM surface. (VG-30 bulk bitumen rates are considered to arrive at rates)

Providing bituminous Type A liquid seal coat on bituminous surface including supplying all materials and bitumen of specified grade preparing existing road surface, heating and applying bitumen @ 0.98 kilogramSqm. by mechanical means, spreading chips and rolling, by static roller having weight 8 to 10 Metric Tonne. excetra. complete. (VG- 30 bulk bitumen rates are considered to arrive at rates)

Providing and applying tack coat on the prepared surface heating by fames in Boiler and spraying bitumen set footed in bitumen boller on B.T. surface 2.5 kilogram/10 sqm.(VG-30 bulk bitumen rates are considered to arrive at rates)

Providing and fixing rolling shutter fabricated from steel laths of minimum thickness 0.9 millimeter with lock plate of 3.15 millimeter thickness reinforced with 35 x 35 x 5 millimeter angle section fitted with sliding bolts and handles for both sides, deep M.S. channel section of depth and thickness not less than 65 millimeter and 3.15 millimeter respectively with hold fast arrangements, M.S. Bracket plate 300 x 300 x 3.15 millimeter minimum size and shape with square bar, suspension shaft of minimum 32 millimeter diameter, hood cover of M.S. sheet not less than 0.9 millimeter thickness and of any size at top and safety devices including mechanical gear operation arrangement consisting of worm gear wheels and worms of high grade cast iron or mild steel and one coat of red lead primer excetra. complete. (Indian Standard 62481979) (With mechanical gear) Ground floor

Providing,aupplying,fabricating and fixing panel of aluminium composite panel cladding in approved shape made out of 4 millimeter thick ACP sheet material consisting of 3millimeter thick FR grade mineral core following NBC part IV Fire and life safety (having 2 hours fire resistance in accordance to ASTM E119-12 and BS476 part 6 and 7 class O) sandwitched between two aluminium sheets (each 0.5 millimeter thick of AA 5005/AA3105 grade) The aluminium composite panel cladding sheet shall be coil coated with kynar 500 based PVDF/Lumiflon based fluropolymer resin (having 70:30 ratio of PVDF and acrylic) coating of approved colour and sg=hade on top face and polymer (service) coating of bottom face as specified using stainless steel screws,nuts,bolts,washers, cleats,weather silicon sealent,backer rods excetra .overall weight of the ACP shall not be less than 7.5 Kilogram/Square Metre) Ground floor

Providing and casting in situ or precast tapering Reinforced Cement Concrete M-20 Barrier type Kerb with gutter ( as per IRC 86 1983) embedded 125millimeter below ground level over M-10 PCC finished neatly with Cement Mortar 1:2, setting the same in Cement Mortar 1:2, including the required excavation in any strata and removing the excavated stuff any where in city and redoing the surface as specified and directed by Engineering In-charge. Using Concrete Batching and Mixing Plant

Dewatering on BHP basis by using water pump including diversion of stream, providing cofferdams, earthern bunds excetra. as may be necessary for foundation and other parts of the the works and pumping out water during and after excavation as may be required by using 3.0 BHP pump excetra. complete. (prior approval of Superintending Engineer will be necessary)

Supply and Installation of translucent roof with DPI Flux standing seam multicell polycarbonate panel system. The system with complete assembly of co extruded UV protected multicell panels incorporated into a complete system. Co-extruded UV protected polycarbonate panel system of min 12 millimeter thick of 900 millimeter (min.) width with angular daylighting concept. Panels shall have minimum six layers with truss bridge design for higher flexibility & strength. Panels with all fixing accessories to ensure best performance for wind uplift, vibration, oil canning and visual appearance. Panels shall be manufactured with vertical standing seam at both sides of the panel. Panels shall be fixed on Purlin with snap on connectors with double tooth grip lock locking mechanism and will be secured on MS structure (will be paid Separately) with 3 numbers self-drilling screws & trapezoid SS fasteners holding the base of the standing seam offering best stability having a pull-out load of min. 7000N (7KN) tested as per ISO 6892:1998 and IS 1608: 2005, as per design requirement. Panels must satisfy Dart drop impact test as per IS 14443-97 shall show no sign of breakage on Polycarbonate sheets which have been exposed to UV for a min. of 500 Hours as per ASTM G 155. Panels shall not have Yellowness Index as per ASTM D 1925 of 15 units when tested on a sample exposed to UV for 500 Hours as per ASTM G 155. U value shall not be more than 1.6 W/m2K as per EN ISO 10077-2:2018. Panel shall be with additional End cap/Aluminium U/F profile/ Glazing Bar for ends as required. Panel shall be fixed over MS structural steel/MS purlin (paid separately) conforming to the detail technical specifications as per approved architectural drawings. Trained and factory authorized labour with supervision to complete the entire panel installation as per drawing & direction of the engineering in charge. Colour: As per Approval. Approved Make: FLUX by DPI Daylighting or approved equivalent The 12millimeter thick panels shall be used for a roofing height of upto 15 mtrs. Third floor

Fourth floor

Terrace floor

Providing and fixing 45 cm wide mild steel ladder of 40millimeter x 6 millimeter mild steel flat stringers and steps of 18 millimeter dia. mild steel bar for water tank including fixing it in (1:2:4) M-15 cement concrete block 60cm x 30cm x 30cm and painting the ladder complete. (Anti Corossive Paint) Third floor

Fourth floor

Terrace floor

Providing structural steel work in trusses, other similar trussed purlins and members with all bracing, gusset plates excetra. as per detailed designs and drawings or as directed including cutting, fabricating, hoisting, erecting fixing in position, Making riveted/ bolted/ welded connection and one coat of anticorrosive paint and over it 2 coats of oil painting approved quality and shade excetra. complete. Third floor

Fourth floor

Terrace floor

METAL FALSE CEILING WITHOUT SUSPENSION SUPPORT FROM TRUE CEILING: Providing & fixing horizontal level suspended metal ceilings comprising of Metalworks F-H 600 Hook-on corridor system manufactured by Armstrong Ceiling Solutions with Rectangular panels made of 0.7millimeter thick Galvanised Steel (GI) of 120gsm, post coated to Global White colour, suitable for Interior applications and architectural finishes, double grid concealed system and butt joint panels. The panel width shall be 300millimeter, length ranging from 1500millimeter to 2660millimeter. General Specifications:Entire system to be designed for Interior applications, and concealed Grid, Butt joint panels. Panel Specifications: Material: The F-H 600 rectangular Hook-on panels to be made of galvanized steel (GI) of minimum 120gsm hot dipped galvanization (both sides included) as per IS 277 (2003), zero or minimum spangled, in minimum base material thickness of 0.7millimeter as per in IS:513 (1994). Dimensions: The panel Length varies between 1500millimeter to 2660millimeter, panel Width shall be 300millimeter. The dimensional tolerances for length shall be ±1.0m up to 1000millimeter L; ±1.5millimeter between 1001 to 2000millimeter L;±2.0millimeter between 2001 to 3000millimeter L. The dimensional tolerances for width shall be ±0.5m up to 300millimeter W. Dimensional Tolerances for panel Thickness / panel width / panel length - to be measured in accordance with TAIM standards. Edge detail: the panels shall ha+A3ve Square Edge, with a 3millimeter(W) x 8millimeter(H) black foam gasket glued at the edges, typically on one long and one short side. All adjacent panels shall touch each other forming a butt joint and concealed grid visuals. Upturns: The short side of the panel shall have vertical upturns of minimum 30millimeter (H) and shall be bent appropriately bent as per the manufacturer‘s specifications for providing hook-on ends. The long side shall have inside horizontal bends of 5-15millimeter for rigidity and vertical upturns of 40millimeter (for length ranging from 1251-2660millimeter). Surface Finish: Plain: The panels shall be in plain unperforated finish (without any acoustical backing / felt). Colour and finishes: The panel surface shall be electrostatically powder coated (post coat) on visible side after mechanical production, using RoHS compliant powder, to achieve coating thickness ranging from 60-80µ and architectural quality finish. The powder coating shall pass Salt Spray Test for 750 Hours as per ASTM B117, QUV –A Test for 1000hours as per ASTM G-154 – (Cycle – 1) and Humidity test for 1000hours as per DIN 50017, 250 hours of condensation test (as per DIN 50017 or DIN EN ISO 6270-1 Norms), UV resistance of 500 hours and 50% gloss retention (as per ASTM G 154 UVB-313 Norms). The powder coating shall have an adhesion of GT0 as per EN ISO 2409. The shade variation across batches shall be delta E (∆e) <1 measured using Excite/BYK Gardner instrument and gloss level of 25±5% at 60˚ as per ASTM D523.The colour / shade to be Global White (Polyester for Interior) as approved by the Architect or Engineer-in-charge. Surface Protection: The visible panel surface shall be protected using a guard film made of LDPE of 50µ thickness, having appropriate surface adhesion (or tackiness) corresponding to surface gloss level. Light reflectance: The panel shall have a Light Reflectance of ≥ 63% in accordance to ASTM 1477-98. Flatness and Sag limit: Panels shall be flattened by precision leveller to minimize sag to less than Length/400millimeter. The difference between the two diagonal dimensions of the panel to be less than 1millimeter. The sag to be measured at the center in accordance with TAIM standards. Access and Plenum space: The panels to be Fully Accessible, with system height of 98millimeter, and would require a plenum height of a minimum 450millimeter clear space from bare ceiling / rigid structure for installation. Packaging: The Panels shall be packed in wooden crates of appropriate dimensions based on panel sizes. The wooden planks for rates shall have thickness of approx.15millimeter, width of around 4‖ and gap between two planks around 3‖. Crates to have layer separators of 1‖ x 2‖ dimensions to prohibit load transfer on bottom panels, and the crates lifting to be 2way or 4way. The bottom of crates shall be completely closed, and the panels kept inside shall have cushioning of corrugated sheets or other appropriate material. Installation Specifications: Primary and secondary runners Installation: U-Profiles, spaced at 1200millimeter, to be suspended from ceiling using clamping brackets and threaded rods OR hanger wires. Hanger wires must be wrapped tightly with 3 full wraps. The J-Bars (directional) shall intersect the U-profile at 90° at every module dictated by the panel length. The J-Bar is connected to the U- Ground floor

First floor

Second floor

Third floor

Fourth floor

Providing and fixing Indian teak wood plank ceiling 20 millimeter thick plain underside tongued and grooved including iron screws, scaffolding, if necessary, including one primer coat on under side and one coat of coal tar on upper side excetra. complete. Third floor

Fourth floor

Providing earth work in embankment with approved materials obtained from departmental land upto lead of 50m. including all lifts, laying in layers of 20centimeter. to 30centimeter. thickness breaking clods, dressing to the required lines, curves, grades & section, watering and compaction with vibratory roller to achieve not less than 97 % of standard proctor density excetra. complete ( Material obtained from departmental Land)

Providing and laying cement concrete pipe of Indian Standards 458:2003 NP-2 class of 600millimeter diameter in proper line, level and slope including providing and fixing collars in cement mortar 1:2 and curing excetra. complete.

Providing and laying cement concrete pipe of Indian Standards 458:2003 NP-2 class of 900millimeter diameter in proper line, level and slope including providing and fixing collars in cement mortar 1:2 and curing excetra. complete.

Providing and applying Two coats of wall care Putty on plastered surface and Ceiling and Walls to prepare surface even and smooth of approved make, excetra complete. Ground floor

First floor

Second floor

Third floor

Fourth floor

Fifth floor

Sixth Floor

Seventh floor

Eighth floor

Nineth floor

Tenth floor

Eleveth floor

Twelevth floor

Terrace floor

Providing and fixing mild steel grill railing weighing 15Kilogram/ One Square Metre. with Poly vinyl Chloride handrail cover and newel post for staircases, including fabricating, fixtures, drilling holes in concrete / other surface, erecting the grill work, necessary welding, fixing by nuts and bolts, fixing Poly vinyl Chloride handrail cover, with one coat of anticorrosive paint and two coats of oil painting with approved colour and shade, remaking the damaged surface, cleaning, excetra. complete. Spec. One Number : As directed by Engineer in charge. Ground Floor

Construction of granular sub-base by providing close graded material, spreading in uniform layers with motor grader/ Paver on prepared surface, mixing by mix in place method with rotavator at Optimum Moisture Content, and compacting with vibratory roller to achieve the desired density, complete as per clause 401 -- By Mix in Place Method and Grading - III Material

BITUMINOUS MACADAM:--Providing and laying bituminous macadam using crushed aggregate of Grading 1, premixed with bituminous binder, transported at site with VTS, laid over a previously prepared surface , finished to the required grade ,level, alignment,and rolling to achieve the desired density for 80/100 millimeter compacted thickness with drum mix type hot mix plant with SCADA having complying essential features of Hot mix plant as per IRC-27 2009 specified conditions and attachments such as electronic load sensor based belt conveyers,automatic synchronization of bitumen and aggregate fedder,built in dust controller system and PLC for Drum Mix plant ,Sensor paver,and Vibratory roller excluding prime/Tack coat excetra. complete --Bitumen 3.30% of specified grade (VG-30 bulk bitumen rates are considered to arrive at rates)

BITUMINOUS CONCRETE:--Providing and laying bituminous concrete using crushed aggregate of grading 1, premixed with bituminous binder @5.40% by weight of total mix and filler, transported at site with VTS, laid over a previously prepared surface, finished to the required grade ,level, alignment, and rolling to achieve the desired density for 50millimeter compacted thickness with drum mix plant with SCADA, Sensor paver and Vibratory roller excluding prime/Tack coat excetra. complete --Bitumen of specified grade with stone dust filler. (VG-30 bulk bitumen rates are considered to arrive at rates)

Two Track Two Glass Shutter Window : Providing and fixing aluminium color anodized system sliding window of various sizes. Window will be made from Geeta / Malwin/Lexil/Brandson, 25 to 27 millimeter slim series or equivalent System. Windows will be of specially extruded aluminium 2 Track - 2 Glass shutter window/ ventilator, track joints will be of 45 degree joints, joints will be fixed with specially developed clits. Track frame will be fixed to the masonry opening of windows with S S 202 screws. Glass shutter will be made from specially extruded aluminium section, glass considered is 5 millimeter clear toughened glass. All shutter will be having 45 degree joints, joints will be fixed with specially developed clits to form uniform hairline joint. All shutter will be fixed to the main frame with necessary double roller to have smooth and easy movement of the shutter. Shutters will have single point self pressing lock. All fixing screws will be of S S 202. Windows will be sealed with weather sealant from outer periphery, excetra. all complete as per architectural drawings and the directions of the engineers-in-charge with all necessary fasteners and accessories complete Basement floor

Ground floor

First floor

Four Track Three Glass + One Net Shutter Window: Providing & Fixing Aluminium System anodized sliding windows of various sizes. Sliding will be made from Geeta / Malwin/Lexil/Brandson, 27 millimeter Slim series or equivalent system. Windows will be of specially extruded aluminium 4 Track -3 Glass + 1 net shutter with Bottom Fixed. Fixed Glass at Bottom as per drawings would be fixed on 40millimeter Casement Series Frame section & Single glass Glazing clip both having 45° Joints with special cleats & fixed to missionary by SS 202 wood screws. The Sliding Window Track mounted on Special Square Aluminium section, The track fra me will be fixed to the masonry opening of windows with SS 202 wood screws. Glass shutter will be made from specially extruded aluminium section, glass considered is 6 millimeter clear Toughened Glass. All shutters will be having 45° joints, joints will be fixed with specially developed clits to form uniform hairline joint. All Shutter will be fixed to the main frame with necessary double roller to have smooth & easy movement of the shutter. Shutters will have single point self pressing lock. Windows will be sealed with weather sealant from outer periphery,excetra. all complete as per architectural drawings and the directions of the engineers-in-charge with all necessary fasteners and accessories complete Ground floor

First floor

Second floor

Third floor

Fourth floor

Fifth floor

Sixth Floor

Seventh floor

Eighth floor

Nineth floor

Tenth floor

Eleveth floor

Twelevth floor

Aluminium System Color Anodized Partly Fixed partly Openable Window : Providing and fixing aluminium system color anodized Partly Fixed partly Openable window of various sizes. Casement will be made from Geeta / Malwin/Lexil/Brandson, 40 millimeter series or equivalent System. Windows will be of specially extruded aluminium section, joints will be of 45 degree joints, joints will be fixed with specially developed clits. Track frame will be fixed to the masonry opening of windows with S S 202 wood screws. Fixed glass casement will be made from specially extruded aluminum section, glass considered is 5 millimeter clear toughened glass. All shutter will be having 45 degree joints, joints will be fixed with specially developed clits to form uniform hairline joint. All fixing screws will be of S S 202. Windows will be sealed with weather sealant from outer periphery, excetra. all complete as per architectural drawings and the directions of the engineers-in-charge with all necessary fasteners and accessories complete Ground floor

First floor

Second floor

Third floor

Fourth floor

Fifth floor

Seventh floor

Nineth floor

Eleveth floor

Openable Shutters/Windows in Structural/Curtain Glazing : Providing and fixing openable shutter in structural glazing work of 5millimetertk tented toughened glass with frame work made of aluminum RHS of size 64millimeter x 58millimeter color anodized as per design and drawing, aluminum sections should be confirming IS 63400 , glass pasted to frame work with 3M VHB tape and DOW CORNING 995 silicon sealant and gaps between glass panels should be filled by clear Dow CORNING 789 silicon weather proofing sealant , with good quality SS friction hinges, rubber gaskets handles all necessary fasteners and accessories complete including With 24” Heavy S.S. Friction Hinges, Heavy Handles & 1" window Handle Section of approved make, shade all complete as per architectural drawings and the directions of the engineers-in-charge with all necessary fasteners and accessories complete Ground floor

First floor

Second floor

Third floor

Three Track Three Glass Shutter Window :Providing and fixing aluminium system color anodized sliding window of various sizes. Window will be made from Geeta / Malwin/Lexil/Brandson, 25 to 27 millimeter slim series or equivalent System. Windows will be of specially extruded aluminium 3Track - 3 Glass shutter, track joints will be of 45 degree joints, joints will be fixed with specially developed clits. Track frame will be fixed to the masonry opening of windows with S S 202 screws. Glass shutter will be made from specially extruded aluminium section, glass considered is 5 millimeter clear toughened glass. All shutter will be having 45 degree joints, joints will be fixed with specially developed clits to form uniform hairline joint. All shutter will be fixed to the main frame with necessary double roller to have smooth and easy movement of the shutter. Shutters will have single point self pressing lock. All fixing screws will be of S S 202. Windows will be sealed with weather sealant from outer periphery, excetra. complete. First floor

Three Track Two Glass + One Net Shutter Window :Providing and fixing aluminium system color anodized sliding window of various sizes. Window will be made from Geeta / Malwin/Lexil/Brandson, 25 to 27 millimeter slim series or equivalent System. Window will be of specially extruded aluminium 3Track - 2 Glass + 1 net shutter, track joints will be of 45 degree joints, joints will be fixed with specially developed clits. Track frame will be fixed to the masonry opening of windows with S S 202 screws. Glass shutter will be made from specially extruded aluminium section, glass considered is 5 millimeter clear toughened glass. All shutter will be having 45 degree joints, joints will be fixed with specially developed clits to form uniform hairline joint. All shutter will be fixed to the main frame with necessary double roller to have smooth and easy movement of the shutter. Shutters will have single point self pressing lock. All fixing screws will be of S S 202. Windows will be sealed with weather sealant from outer periphery, excetra. all complete as per architectural drawings and the directions of the engineers-in-charge with all necessary fasteners and accessories complete First floor

Second floor

Third floor

Fourth floor

Fifth floor

Sixth Floor

Seventh floor

Eighth floor

Nineth floor

Tenth floor

Eleveth floor

Twelevth floor

Solid Core Flush door Single leaf Providing and fixing factory made solid core flush door in single leaf 35 millimeter thick, decorative types, of exterior grade, as per detailed drawings, conforming to Indian Standard:2202 - 1962 (Revised) with approved face Laminate on both faces with/without glazing and venetians in the positions shown on the drawings or as directed, all necessary beads, moulding and lipping, holdfasts, mat finish stainless steel fixtures fastenings , finishing with french-polish/ waxing complete. (without door frame).(Sample to be got approved from Ex.Engineer before use) Comillimeterercial Hard Wood shutter Second floor

Third floor

Fourth floor

Fifth floor

Sixth Floor

Seventh floor

Eighth floor

Nineth floor

Tenth floor

Eleveth floor

Twelevth floor

Providing and laying Vitrified tiles (Matt and Antiskid Finish) in floor in 600milimeter x 1200milimeter sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS:15622, of approved brand and manufacturer, in all colours and shade, laid on 20 milimeter thick cement mortar 1:4 (1 cement: 4 coarse sand) jointing with grey cement slurry @3.3 kilogram/sqm including grouting the joints with white cement and matching pigments excetra. The tiles must be cut with the zero chipping diametermond cutter only . Laying of tiles will be done with the notch trowel, plier, wedge, clips of required thickness, leveling system and rubber mallet for placing the tiles gently and easily.as directed by engineer-in-charge. Ground floor

First floor

Second floor

Third floor

Fourth floor

Fifth floor

Sixth floor

Seventh floor

Eighth floor

Nineth floor

Tenth floor

Eleventh floor

Twelveth floor

Providing and laying Vitrified tiles (Matt and Antiskid finish) in floor in 800milimeter x 1200milimeter sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS:15622, of approved brand and manufacturer, in all colours and shade, laid on 20 milimeter thick cement mortar 1:4 (1 cement: 4 coarse sand) jointing with grey cement slurry @3.3 kilogram/sqm including grouting the joints with white cement and matching pigments excetra. The tiles must be cut with the zero chipping diametermond cutter only . Laying of tiles will be done with the notch trowel, plier, wedge, clips of required thickness, leveling system and rubber mallet for placing the tiles gently and easily.as directed by engineer-in-charge. Ground floor

Providing & laying wooden based matt finished Vitrified tiles of approved colour having size 190 to 200millimeter x 1200millimeter and 8 to 10 millimeter thick for flooring. Required sample is needs to get approved from the project Architect before execution on site. Work shall be carried our including all lead and lifts excetra as directed by Engineer-In-Charge. Ground floor

Wall cladding with Terracotta desiner jali ; Designing ,supplying and fixing of Terracotta desiner jali of Nuvocotto or Equivalent make of size having 200x200x60millimeter as per manufacturer finished with approved colour and pattern . The blocks shall be fixed by suitable system by using mortar or special ready mix mortar or adhesive per manufacturer guidelines and specifications with suitablable thickness of joining material, size and spacing to withstand the structural design criteria specified, supported or locked by beams or columns as per design height criteria of the cladding as per manufacturer technical specification, Cladding joints should be with as per design and drawings including cutting, jointing, fixing, scaffolding, cleaning, lead, lifts, handling excetra. complete as shown in design, drawings and specifications as directed by engineer & In charge.Sample needs to get approved from project architect before execution of work. Ground floor

First floor

Second floor

Third floor

Fourth floor

Fifth floor

Sixth Floor

Seventh floor

Eighth floor

Nineth floor

Tenth floor

Eleveth floor

Twelevth floor

Terrace floor

Galvanised Fins: Providing and fixing 300x75millimeter rectangular metal Fins made from 0.7millimeter GI Sheet with infill of honecombing foam, powder coated with pure polyester Matt finish exterior grade UV resistant powder coating for 10 years warranty. The fins have to withstand it's Self load and windspeed of 120kmph. The brackets 2millimeter or as required thick have to be camouflaged in the fins to give a thorough fin height from Ground to Top floor. Brackets to be fixed to the substructure or civil work using Ceramic coated or SS anchors studs. The fins to be connected to the brackets using wafer head SS Screws. Provision to be made water drainage through the fins to prevent any future rusting. The entire system has to be backed up by a structural stability report from a Chartered Engineer. Required detailed shop drawing and sample is needs to get approved from the project Architect before execution on site. Work shall be carried our including all lead and lifts excetra as directed by Engineer-In-Charge. Ground floor

First floor

Providing and installating the Statue of maximum size 2m wide x 2m long x 3m high of granite stone material as per the design and drawing provided by the Architect including all required cutting, grinding, finishing, polishing excetra. Required detailed shop drawing and sample is needs to get approved from the project Architect before execution on site. Work shall be carried our including all lead and lifts excetra complete as directed by Engineer-In-Charge.

Providing and applying Texture Plaster Of STONETEX - TRAVERTINE SERIES -ST-2002 special luxurious stone finish coating (3 product type – 6 coat system) for exteriors and interiors. Texture midcoat incorporating natural stone granules like natural Sandstone, Granite, Limestone, Ceramic chips, natural sand excetra. including grooves to be provide as per design and drawings. Apply two coats of under coat primer by roller or brush then apply masking tape to create grooves as per design and drawings. First coat of texture midcoat finish by spray gun, evenly over the entire surface. Apply second coat of texture midcoat finish by spray sprinkle method, evenly on the whole sea of the previously dried first coat. Apply two coats of top protective coat evenly on the surface including grooves with roller or brush. It should be water based and ecofriendly product including preparing the surface, scaffolding excetra. complete as directed by Engineer in-charge Basement floor

Ground floor

First floor

Second floor

Third floor

Fourth floor

Fifth floor

Sixth Floor

Seventh floor

Eighth floor

Nineth floor

Tenth floor

Eleveth floor

Twelevth floor

Terrace floor

Suppling and fixing Mural work in combination of alluminium perforated panel and sheet with powder coating or duco paint with lacquer coat for rust free and long life.Each design will be attached to a metal sheet as a backilogramround guard.The design will be in a relief work upto 75millimeter from the wall.Thickness of wall material will defer as per requrement.Job should be strictly workout as project architect guild line excetra complete as per directed by Engineer In charge. Ground floor

First floor

Providing & Fixing Aluminium colour anodized sliding & folding door 3 shutters having special patented frame & shutter profiles.Oter frame profles being fixed to the missionary with SS-202 screw shutters having 45 degree corner joints with special cleats for linear joints having 6millimeter toughned glass are installed in the frame structure with mortise lock at opening, Top & bottom pivots for sliding,but hinges for folding operation & subsidiary multi point locking & pop handle for additional security,complete. Ground floor

First floor

Providing and fixing double shutter glass door of required size of 12millimeter thick toughen glass frosting and edge polish as shown in the drawings or as directed,including all necessary fittings like hydraulic patch fittings, Top pivot,door handle,door lock,door stopper,door soft central 180 weather seal for door edges excetra all complete as per architectural drawings and directions of the Engineers-in- charge with all neccessary fastners and accessories complete . Ground floor

First floor

Second floor

Third floor

Alluminium System colour anodized Fixed window - Providing and fixng alluminium system colour anodized fixed window of various sizes.Casement will be made from Geeta,Malwin/Lexil/Brandson,40millimeter series or equivalent system window will be of specially extruded alluminium section,joints will be of 45 degree joints,joints will be fixed with specially developed clits.Track frame will be fixed to the masnory opening of windows with S S 202 wood screws.Fixed glass casement will be made from specially extruded alluminium section,glass considered is 5millimeter clear toughned glass. All shutter will be having 45 degree joints,joints will be fixed fixed with specially developed clits to form uniform hairline joints.All fixing screws will be of SS 202 windows will be sealed with weather sealant from outer periphery excetra complete. Ground floor

First floor

Second floor

Third floor

Fourth floor

Fifth floor

Sixth Floor

Seventh floor

Eighth floor

Nineth floor

Tenth floor

Eleveth floor

Twelevth floor

Providing and fixing CNC cutting MS jali having 4millimeter thick with powder coating with necessary fiitings required as per detailes provided by architect.Location of MS jali work will be as per drawing including lead ,lift excetra complete as per directed by Engineer In charge. Second floor

Third floor

Providing & fixing Luxalon SL4 84R plain panel sun louvers Of approved color consisting of panel 84millimeter wide 16millimeter deep x 0.6millimeter thick with round edges panel length up to 6 Mt coil coated on continues paint Line double baked & roll formed from enameled corrosion resistance. Aluminium Alloy AA3005 (Al. Mg.) for higher strength & good roll forming characteristics Panel shall be clipped to baked enameled aluminium SL-4 panel stringer of 33 millimeter wide & 86millimeter deep X 0.95 millimeter thick in a standard Length of 5 Mt made of double baked enameled Aluminium alloy AA5050 (Al. Mg.) black with cut-outs to hold the panel in a module of 86millimeter center to center at a distance of 1 Mt. The Carrier shall be fixed to suitable structure by means of rigid fixing details including Paint Finish : Aluminium panels shall be cromotised for maximum bond between metal & paint enameled twice under high temperature one side with full primer & luxacoat finish. The other side (Inner side) with a primer coat & skin coat on a continuous paint line excetra.complete as directed by Engineer-in-charge. Ground floor

First floor

Providing ,fixing,testing and comillimeterisioning of turbo ventilators of approved make of size 24" self propelled fans having stainless steel 430 grade body with approximate weight 4.85 kilogram., having a CFM-7KM per hours-2440 with blade length 360millimeter wings of 80millimeter. including cutting roofing sheet,making the joints water tight,including all quality fastenings,fixing with self tapping screws from Buildtex, internal butt strap inlayed gasket,metal washers and Neoprene/EPDM washers,scaffoldings excetra. complete. Location of Turbo vent as per drawing excetra. complete. (Turbo vent should be Self-lubricating bearing) Fourth floor

S.S. Railing : Providing and Fixing matt finished stainless steel (Grade 304) railing with 60milimeter x 40milimeter and 1.6milimeter thick pipe as handrail at top, 40milimeter x 8milimeter vertical patti placed at 1148 milimeter center to center, 40milimeter x 8milimeter horizontal patti placed at bottom 100 milimeter above the flooring,12milimeter diametermeter pipe placed vertically in between handrail and bottom patti at 150milimeter c/c and 75milimeter c/c alternately as shown in the drawing. including buffing, fabricating fixtures and fastening including base or cover plate of appropriate size as directed by Engineer in charge excetra. Complete. Basement floor

Ground floor

First floor

Second floor

Third floor

Fourth floor

Fifth floor

Sixth Floor

Seventh floor

Eighth floor

Nineth floor

Tenth floor

Eleveth floor

Twelevth floor

Terrace floor

Providing and fixing glass door size 1.0meter/1.2meter x 2.7meter single leaf shutter of 12 milimeter thick toughen glass frosting and edge polish as shown in the drawings or as directed , including all necessary fittings like hydraulic patch fitting, top patch fittings, Top pivot, door handle, door lock, door stopper, door soft central 180 weather seal for door edges excetra. complete as directed by Engineer -IN-Charge First floor

Second floor

Third floor

Providing and fixing 12 milimeter thick toughen glass and edge polish as shown in the drawings or as directed, including all necessary fittings like Upper glazing profile, bottom locking glazing profile, standard gasket for profile, locking Gasket 12milimeter, door soft central 180 weather seal for glass edges as per drawings having glass fixing sections at all sides concealed in partitions excetra. complete as directed by Engineer -IN-Charge. gaps between glass panels should be filled by clear silicon weather proofing sealant , EPDM gaskets, handles all necessary fasteners and accessories complete.as directed by engineer-in-charge. Ground floor

First floor

Second floor

Third floor

Providing and fixing Ivory Opal series European type wall-hung of size 400 millimeter X 370 millimeter X 575millimeter with approved make flush valve including soil pipe, vent pipe upto outside face of wall, 100millimeter dia C.I. plug bend inlet pipe all fittings, cutting & making good walls, floors excetra as directed by Engineer in charge. Ground floor

First floor

Second floor

Third floor

Fourth floor

Fifth floor

Sixth Floor

Seventh floor

Eighth floor

Nineth floor

Tenth floor

Eleveth floor

Twelevth floor

Providing and fixing Orissa Pan of size 580 X 445 X 260 millimeter with approved make flush valve including trap, C.I. soil and vent pipe upto outside face of wall including 100millimeter dia. C.I. plug, bend and necessary pipe connection, excetra complete. As directed by Engineer in charge. Ground floor

Providing and fixing Ivory wash basin with half pedestal of size 515millimeter X 615millimeter X 460 millimeter including pillar cock auto-closing system CP angular stop cock long thread of approved make continental including S.S. bottle trap of necessary pipe connection upto the outside face of the wall. Ground floor

First floor

Second floor

Third floor

Providing and fixing Oval Type Under Counter Wash Hand Basin of 420 x 590 x 195millimeter size with pillar cock, C.P.Angular stop cock, long thread of approved make continental including SS bottle trap of necessary pipe connection up to the outside face of the wall, having Telephonic Black / Colour Granite of 180 millimeter thick fixed on Black Kadappa Framework, excetra. Complete as directed by Engineer in charge. Ground floor

Second floor

Third floor

Fourth floor

Fifth floor

Sixth Floor

Seventh floor

Eighth floor

Nineth floor

Tenth floor

Eleveth floor

Twelevth floor

Providing and fixing Ivory glazed urinal with Pressmatic auto closing valve having flow rate up to 4.0 Litr/Minute of Jaquar / Cera / Hindware / Perryware or equivalent make with Poly Vinyl Chloride waste pipe with fitting arrangement excetra.complete as directed by Engineer in charge. ( Make shall conform to manufacturer's Green product and shall got approved from the Engineer In Charge.) First floor

Second floor

Third floor

Fourth floor

Providing and fixing C.P. Angular stop clock with wall flange of approved make continental including necessary sockets/union nut excetra. complete. Ground floor

First floor

Second floor

Third floor

Fourth floor

Fifth floor

Sixth Floor

Seventh floor

Eighth floor

Nineth floor

Tenth floor

Eleveth floor

Twelevth floor

Providing and fixing C.P. BIB cock with wall flange of approved make including necessary sockets/ union nut excetra. complete as directed by Engineer in charge. Ground floor

First floor

Second floor

Third floor

Fourth floor

Providing and fixing C.P. 2 Way BIB cock with wall flange of approved make including necessary sockets/ union nut excetra. complete as directed by Engineer in charge. Ground floor

First floor

Second floor

Third floor

Fourth floor

Fifth floor

Sixth Floor

Seventh floor

Eighth floor

Nineth floor

Tenth floor

Eleveth floor

Twelevth floor

Providing and fixing 15 millimeter diameter Poly vinyl Chloride Aqua kraft type of approved make super jet spray with flange 2 in 1 faucet 1.50 metre long including all accessories excetra complete Ground floor

First floor

Second floor

Third floor

Fourth floor

Fifth floor

Sixth Floor

Seventh floor

Eighth floor

Nineth floor

Tenth floor

Eleveth floor

Twelevth floor

Providing and fixing divertor with overhead shower,shower arm,spout,hand shower with wall bracket having flow rate up to 12 liters/minutes of Jaquar/Cera/Hindware /Perryware or equivalent make including all necessary pipes,fittings excetra.complete as directed by Engineer In Charge.( Make shall conform to manufacturer's Green product and shall got approved from the Engineer In Charge.) First floor

Second floor

Third floor

Fourth floor

Fifth floor

Sixth Floor

Seventh floor

Eighth floor

Nineth floor

Tenth floor

Eleveth floor

Twelevth floor

Providing and fixing sink cock with regular swinging spout (Wall / floor Mounted Model) with wall flange having flow rate up to 6.0 Litr/Minute of Jaquar / Cera / Hindware / Perryware or equivalent make incluidng other necessary fitting, excetra. complete as directed by Engineer in charge. (Make shall conform to manufacturer's Green product and shall got approved from the Engineer In Charge.) Ground floor

First floor

Second floor

Third floor

Fourth floor

Providing and fixing 450millimeter x 550millimeter size superior type Belgium mirror with 16millimeter dia. nickel plated towel rod excetra. complete. Ground floor

First floor

Second floor

Third floor

Fourth floor

Fifth floor

Sixth Floor

Seventh floor

Eighth floor

Nineth floor

Tenth floor

Eleveth floor

Twelevth floor

Grab bars-Providing SS grab bars set for accessible toilets comprising of 4 nos. Grab bars as specified below.(1 nos. wing grab bar + 1 nos. L shaped grab bar + 2 nos. straight grab bars = 1 typical set) 27a) Swing grab bar (1 NOS) Providing a S.S. 304 SWING HANDICAP GRAB BAR - 700 millimeter and of DIA: 32millimeter and thickness 1.5millimeter of the roved brand and make. 27b) L Shaped grab bar (1 NOS) Providing S.S. 304 L SHAPED DISABLED GRAB BAR of IZE-600millimeter (H) X 600millimeter (D) and 32millimeter DIA. and thickness millimeter of the approved brand and make. 27c) Straight grab bar (2 NOS) Providing S.STEEL 304 GRAB RAIL (600 millimeter),32millimeter DIA. and thickness 1.5millimeter of the approved brand and make. Ground floor

First floor

Second floor

Third floor

Fourth floor

Providing and fixing 75 millimeter dia stabiliser pipe/ Poly Vinyl Chloride soil vent/waste pipe and with necessary fixtures and fitting such as bends, tees, single junctions, slotted vent, clamps excetra. Complete Ground floor

First floor

Second floor

Third floor

Fourth floor

Fifth floor

Sixth Floor

Seventh floor

Eighth floor

Nineth floor

Tenth floor

Eleveth floor

Twelevth floor

Terrace floor

Providing and fixing 100 millimeter dia stabiliser pipe/ Poly Vinyl Chloride soil vent/waste pipe and with necessary fixtures and fitting such as bends, tees, single junctions, slotted vent, clamps excetra. complete. Ground floor

First floor

Second floor

Third floor

Fourth floor

Fifth floor

Sixth Floor

Seventh floor

Eighth floor

Nineth floor

Tenth floor

Eleveth floor

Twelevth floor

Terrace floor

Providing and fixing Poly Vinyl Chloride Rain water pipes of 160millimeter & above (Preffered 250millimeter) outer diameter and having wall thickness of 2.2 to 2.7 millimeter confirming to Indian Standard 13592-1992 including proper rainwater receiving recess with Poly Vinyl Chloride plug, bend, necessary fittings, such as, offsets, shoes, inluding fixing the pipe on wall using approved wooden cleats projecting 25millimeter to 40millimeter from face of wall a fixing with clips of approved quality and One Number ,filing the joint using rubber gasket with solvent cement and properly resting the shoe of pipes on C.C. or masonry blocks, including necessary scaffolding and maintenance for 3 yrs for any leakages or dislocations of pipes. All the Poly Vinyl Chloride fittings and additional 2 piece socket clips shall be got approved from engineer in charge excetra. complete. Ground floor

Providing and fixing Poly Vinyl Chloride Rain water pipes of 160 millimeter outer diameter and having wall thickness of 2.2 to 2.7 millimeter confirming to Indian Standard 13592-1992 including proper rainwater receiving recess with Poly Vinyl Chloride plug, bend, necessary fittings, such as, offsets, shoes, inluding fixing the pipe on wall using approved wooden cleats projecting 25millimeter to 40millimeter from face of wall a fixing with clips of approved quality and One Number ,filing the joint using rubber gasket with solvent cement and properly resting the shoe of pipes on C.C. or masonry blocks, including necessary scaffolding and maintenance for 3 yrs for any leakages or dislocations of pipes. All the Poly Vinyl Chloride fittings and additional 2 piece socket clips shall be got approved from engineer in charge excetra. complete. Ground floor

First floor

Second floor

Third floor

Fourth floor

Fifth floor

Sixth Floor

Seventh floor

Eighth floor

Nineth floor

Tenth floor

Eleveth floor

Twelevth floor

Terrace floor

Providing and fixing 15 centi meter rigid Poly vinyl Chloride Nahani trap including Poly vinyl Chloride grating ,bend,connectingpiece of Unplasticized Poly vinyl Chloride pipe up to the outside face of wall ,making the good damaged surface and testing excetra. complete ( Prior approval of sample and brand by Ex. Engr. is necessary before use) Ground floor

First floor

Second floor

Third floor

Fourth floor

Fifth floor

Sixth Floor

Seventh floor

Eighth floor

Nineth floor

Tenth floor

Eleveth floor

Twelevth floor

Providing and fixing on walls/ceiling/floor 20 millimeter dia. Chlorinated Poly vinyl Chloride pipe with necessary fittings, remaking good the demolished portion excetra. complete. Including removing existing pipe line if necessary and conveying and stacking the same in PWD chowky or as directed excetra. complete. Ground floor

First floor

Second floor

Third floor

Fourth floor

Fifth floor

Sixth Floor

Seventh floor

Eighth floor

Nineth floor

Tenth floor

Eleveth floor

Twelevth floor

Providing and fixing on walls/ ceiling/ floor 25 millimeter dia. Chlorinated Poly vinyl Chloride pipe with necessary fittings, remaking good the demolished portion excetra. complete. Including removing existing pipe line if necessary and conveying and stacking the same in PWD chowky or as directed excetra. complete. Ground floor

First floor

Second floor

Third floor

Fourth floor

Fifth floor

Sixth Floor

Seventh floor

Eighth floor

Nineth floor

Tenth floor

Eleveth floor

Twelevth floor

Terrace floor

Providing and fixing on walls/ ceiling/ floor 32 millimeter dia. Chlorinated Poly vinyl Chloride pipe with necessary fittings, remaking good the demolished portion excetra. complete. Including removing existing pipe line if necessary and conveying and stacking the same in PWD chowky or as directed excetra. complete. Ground floor

First floor

Second floor

Third floor

Fourth floor

Fifth floor

Sixth Floor

Seventh floor

Eighth floor

Nineth floor

Tenth floor

Eleveth floor

Twelevth floor

Terrace floor

Providing and fixing on walls /ceiling/ floor 40 millimeter dia. Chlorinated Poly vinyl Chloride pipe with necessary fittings, remaking good the demolished portion excetra. complete. Including removing existing pipe line if necessary and conveying and stacking the same in PWD chowky or as directed excetra. complete. Ground floor

First floor

Second floor

Third floor

Fourth floor

Fifth floor

Sixth Floor

Seventh floor

Eighth floor

Nineth floor

Tenth floor

Eleveth floor

Twelevth floor

Terrace floor

Providing and fixing on walls/ ceiling/ floor 50 millimeter dia. Chlorinated Poly vinyl Chloride pipe with necessary fittings, remaking good the demolished portion excetra. complete. Ground floor

First floor

Second floor

Third floor

Fourth floor

Fifth floor

Sixth Floor

Seventh floor

Eighth floor

Nineth floor

Tenth floor

Eleveth floor

Twelevth floor

Terrace floor

Providing and laying in trenches 50millimeter dai. Chlorinated Poly vinyl Chloride pipe including necessary excavation, fittings. Refilling trenches excetra. complete. Including removing existing pipe line if necessary and conveying and stacking the same in PWD chowky or as directed excetra. complete.

Providing and laying in trenches 50 millimeter dia. heavy grade having embossed as Indian Standard Institution Mark galvanised iron pipes of 6.33 Kilogram/metre necessary fitting remaking good the demolished portion with filling trenches and with primer of anti-corrosive oil paint , 2 coats complete. Including removing existing pipe line if necessary and conveying and stacking the same in PWD chowky or as directed excetra. complete.

Providing and laying in trenches 80 millimeter dia. heavy grade having embossed as Indian standard Institution Mark galvanised iron pipes of 10.15 Kilogram/metre necessary fitting remaking good the demolished portion with filling trenches and with primer of anti-corrosive oil paint , 2 coats complete. Including removing existing pipe line if necessary and conveying and stacking the same in PWD chowky or as directed excetra. complete.

Providing and fixing screw down for 20 millimeter dia. wheeled stop tap of brass including necessary sockets/union nut complete. Ground floor

First floor

Second floor

Third floor

Fourth floor

Fifth floor

Sixth Floor

Seventh floor

Eighth floor

Nineth floor

Tenth floor

Eleveth floor

Twelevth floor

Providing and fixing screw down for 25 millimeter dia. wheeled stop tap of brass including necessary sockets/union nut complete. Ground floor

First floor

Second floor

Third floor

Fourth floor

Fifth floor

Sixth Floor

Seventh floor

Eighth floor

Nineth floor

Tenth floor

Eleveth floor

Twelevth floor

Terrace floor

Providing and fixing screw down for 32 millimeter dia. wheeled stop tap of brass including necessary sockets/union nut complete. First floor

Second floor

Third floor

Fourth floor

Terrace floor

Providing and fixing screw down for 40 millimeter dia. wheeled stop tap of brass including necessary sockets/union nut complete. Ground floor

First floor

Second floor

Third floor

Fourth floor

Fifth floor

Sixth Floor

Seventh floor

Eighth floor

Nineth floor

Tenth floor

Eleveth floor

Twelevth floor

Terrace floor

Providing and fixing 20millimeter diameter water meter with non-return valve including strainer, sockets/ union nut including water meter box making locking arrangement and lock. (without chamber). First floor

Second floor

Third floor

Fourth floor

Fifth floor

Sixth Floor

Seventh floor

Eighth floor

Nineth floor

Tenth floor

Eleveth floor

Twelevth floor

Providing and fixing 50millimeter diameter water meter with non-return valve including strainer,sockets/ union nut and including water meter box making locking arrangement and lock. [without chamber] Ground floor

First floor

Providing and fixing 80millimeter diameter water meter with non-return valve including strainer, sockets/ union nut and including water meter box making locking arrangement and lock.[Without chamber]. Ground floor

Fourth floor

Providing and making Indian Standard Institution Mark ferrule connection of 50 millimeter dia. to water main including ferrule coupling cast iron bell mouth cover, built in non return valve and fixing including excavation and reinstatement complete. Ground floor

Providing and fixing 40 millimeter. dia Ball cock medium type with Poly vinyl Chloride float including sockets and necessary fittings and tested as per municipal requirements excetra. complete. Ground floor

First floor

Fourth floor

Terrace floor

Providing , constructing and fixing 250 millimeter dia. Inspection chamber made up of UPoly vinyl Chloride material of thickness 3.5 millimeter and height of 259 millimeter with inlet and outlet of 110 millimeter dia. with 75 millimeter dia. U Trap, Ultra shaft pipe of UPoly vinyl Chloride material having height of 470 millimeter and fixing Ultra 250 millimeter dia. Unplasticized Poly vinyl Chloride cover and frame in 150 millimeter thick in c.c.1:2:4, having crushed sand bed of 100 millimeter thick of size 550 millimeter dia. Including excavation and refilling the sides of chamber by crushed sand cushioning 150 millimeter thickness, connecting all required UPoly vinyl Chloride fittings with rubber lubricant excetra. complete.

Providing , constructing and fixing 450 millimeter dia. Inspection chamber made up of Polypropylene / polyethylene material of thickness 3.5 millimeter and height of 388 millimeter with 160 or 200 millimeter main inlet (s) outlet and 110 and / or 160 millimeter branch inlets, with 450 millimeter dia. Ultra shaft pipe of HDPE material having height of 460 millimeter, having Reinforced Cement Concrete cover and frame fixing in 150 millimeter thick in c.c.1:2:4, having crushed sand bed of 150 millimeter thick of size 750 millimeter dia. Including excavation and refilling the sides of chamber by sand crushed cushioning 150 millimeter thickness, connecting all required UPoly vinyl Chloride fittings with rubber lubricant excetra. complete.

Providing , constructing and fixing 600 millimeter dia. Inspection chamber made up of Polypropylene / polyethylene material Having 315 millimeter diameter inlet(s)/outlets and with eccentric reducers as per requirement to connect 160 millimeter and 200 millimeter pipes having thickness of 5 millimeter and 600 millimeter in height, with inbuilt shaft achieve the invert depth as per site condition of wall thickness of 5 millimeter having Reinforced Cement Concrete cover and frame fixing in 150 millimeter thick in c.c.1:2:4, having crushed sand bed of 150 millimeter thick of size 750 millimeter dia. Including excavation and refilling the sides of chamber by ?sand crushed cushioning 150 millimeter thickness, connecting all required UPoly vinyl Chloride fittings with rubber lubricant excetra.complete.

Providing and fixing 15centimeter x 10centimeter salt glazed stoneware gully trap in cement concrete 1:4:8 outside the building including cast iron grating in the sink, connecting glazed stoneware pipe, brick masonry chamber with cast iron lid and cast iron grating for the gully trap.

Providing and laying concrete pipes of Indian Standard NP. class of 150millimeter diameter in proper line, level and slope including necessary collars, excavation, laying, fixing with collars in cement mortar 1:1 and refilling the trench complete.

Providing and laying concrete pipes of Indian StandardNP. class of 225millimeter diameter in proper line, level and slope including necessary collars, excavation, laying, fixing with collars in cement mortar 1:1 and refilling the trench complete.

Providing and laying concrete pipes of Indian Standard NP. class of 300millimeter diameter in proper line, level and slope including necessary collars, excavation, laying, fixing with collars in cement mortar 1:1 and refilling the trench complete.

Providing and laying cement concrete pipe of Indian Standard 458:2003 NP-2 class of 450millimeter diameter in proper line, level and slope including providing and fixing collars in cement mortar 1:2 and curing excetra. complete.

Providing and fixing Ductile iron Man Hole Covers/ Strom Water Grating and Grating with frame of Various sizes, weight and types and load bearing capacity as per EN-124, equivalent NECO with prior approval of concerned Superitending Engineer.

RWH - Recharge Pit Providing and constructing recharge pit of 2.0meter deep and 1.0meter diameter of pre-cast Reinforced Cement Concrete rings with 6.5" dia x 25meter deep borewell at the floor of recharge pit including installation of combination of solid/perforated Poly vinyl Chloride casing pipe wrapped around with netlon mesh including 300millimeter thick sidefilling around outside of Reinforced Cement Concrete rings (annular space) with 40millimeter size boulders including filling of recharge pit up to 0.5meter depth with 25-75millimeter clean washed gravels from bottom up followed by 0.5meter depth of 10-25millimeter of clean washed stones followed by 0.5m of washed river fine aggregate (natural sand/crushed sand VSI grade finely washed excetra.) including netlon mesh between each gravel/fine aggregate (natural sand/crushed sand VSI grade finely washed excetra.) media layer including covering with Reinforced Cement Concrete slab, manhole frame & cover, Poly vinyl Chloride rungs, Poly vinyl Chloride end-caps, fittings excetra. including arrangement for inlet & outlet pipe excavation & backfilling as shown in the drawing.The rate shall be inclusive of all labour, material, wastage, scaffolding, transportation, taxes, including all leads, lifts at all levels. All material should be of approved make. All works complete as per the drawing, technical specification and direction of the Engineer in charge.

Providing and constructing on sewer, Burnt.Brick. masonry circular manhole with concentric cone 1.2 M dia. at bottom and 0.5 M dia. at top and upto a depth of 2.00 M with 23 cm brick work in CM 1:4 proportion excluding excavation including foundation concrete 250 millimeter thick and haunches and channels in C.C. 1:2:4 proportion, finishing channels in smooth rendering, providing C.I. dapuri type steps each weighing 5.5 kilogram., 1:2:4 coping and providing and fixing approved make and quality S.F.R.C. frame and cover of 56 cm dia.excetra. complete as directed by Engineerin-charge.

Providing and constructing on sewer, Burnt .Brick. masonry circular manhole concentric cone 1.5 Meter dia. at bottom and 0.5 Meter diameter. at top and upto a depth of 5.00 Meter with 23 centimeter brick work, upto depth of 2 Meter from top and 35 centimeter thick brick work for balance depth in Cement Mortar 1:4 proportion with 20 millimeter thick smooth plaster on both sides in Cement Mortar 1:2 proportion excluding excavation including foundation concrete 250 millimeter thick and haunches and channels in C.C. 1:2:4 proportion, finishing channels in smooth rendering, providing C.I. dapuri type steps each weighing 5.5 kilogram., 1:2:4 coping and providing and fixing approved make and quality S.F.R.C frame and cover of 56 cm dia. excetra. complete as directed by Engineerin-charge.

Valve chamber with cast iron manhole frame and covers Providing and constructing Burnt Brick masonry valve chamber with 15 centimeter thick 1:3:6 proportion Plain Cement Concrete bedding, excluding excavation, Burnt Brick masonry in Cement Mortar 1:5 proportion, 12 millimeter thick cement plaster in Cement Mortar 1:4 proportion on both sides with providing and fixing C.I. manhole frame and cover in Reinforced Cement Concrete 1:2:4 coping or Reinforced Cement Concrete 1:2:4 proportion x 15 centimeter thick slab, excetra. complete as directed by Engineer-in-charge. As above of 90 x 60 centimeter internal size and depth upto 1.2 Meter with 90 x 60 centimeter size Cast Iron manhole frame and cover of 50 kilogram.

Valve chamber with cast iron manhole frame and covers Providing and constructing Burnt Brick masonry valve chamber with 15 cm thick 1:3:6 proportion Plain Cement Concrete bedding, excluding excavation, Burnt Brick masonry in CM 1:5 proportion, 12 millimeter thick cement plaster in Cement Mortar 1:4 proportion on both sides with providing and fixing C.I. manhole frame and cover in Reinforced Cement Concrete 1:2:4 coping or Reinforced Cement Concrete 1:2:4 proportion x 15 cm thick slab, excetra. complete as directed by Engineer-in-charge. As above of 90 x 90 centimeter internal size and depth upto 1.2 Meter with 53 centimeter diameter Cast Iron manhole frame and cover of 90 kilogram. fixed in Reinforced Cement Concrete slab.

Providing and Fixing Chlorinated Polyvinyl Chloride (CPoly vinyl Chloride) Pipes of 62.50 millimeter nominal inner dia Pipes, having thermal stability for hot & cold water supply, including all CPoly vinyl Chloride plain & brass threaded fittings. This includes jointing of pipes & fittings with one step CPoly vinyl Chloride solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer.

Providing and Fixing Chlorinated Polyvinyl Chloride (CPoly vinyl Chloride) Pipes of 75 millimeter nominal inner dia Pipes, having thermal stability for hot & cold water supply, including all CPoly vinyl Chloride plain & brass threaded fittings. This includes jointing of pipes & fittings with one step CPoly vinyl Chloride solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer.

Providing and Fixing it in position, Alighning to correct position, testing and comillimeterissioning of CP brass Grating (Viking 41615) of Rectangular type with openable circular lid 150 millimeter nominal size square 100 millimeter diameter of the inner hinged round grating. including setting in floor with cement motor to match with floor finish as per architect requirement complete including all accessories. All work Complete as per direction of the Engineer-in-Charge.

Providing and Fixing it in position, Alighning to correct position, testing and comillimeterissioning of CP brass Grating of Close on Top type (Viking 45290) with openable circular lid 150 millimeter nominal size square 100 millimeter diameter of the inner hinged round grating. including setting in floor with cement motor to match with floor finish as per architect requirement complete including all accessories. All work Complete as per direction of the Engineer-in-Charge.

Providing and Fixing it in position, Alighning to correct position, testing and comillimeterissioning of CP brass P Trap 40millimeter Size for wash basin, Urinal & Kitchen Sinks. (Viking-5898 V6 H12) with all necessary fixtures and fitting excetra complete as directed by the Engineer-in-Charge. (Fixtures and fittings as per Approved C.P & Sanitary Product sheet). All work Complete as per direction of the Engineer-in-Charge.

Providing, fixing, testing and comillimeterissioning of Brass Housing Pressure Reduce Valve with balanced seat, standard pattern, set point scale, high quality synthetic material valve insert, SS wire mesh, NBR diaphragm, NBR seats, pressure gauge, complete as required in water supply drop pipes. To be installed inside shaft, on-line type. Pressure range Complete as per direction of the Engineer-in-Charge. ii) 25 mm dia

iii) 32 mm dia

iv) 40 mm dia

vi) 50 mm dia

vi) 65 mm dia

Providing and fixing 600 millimeter long MS hot dip galvanized Puddel Flange fabricated out of 6 millimeter thick MS plates of suitable size and pipe shall be confirming to IS:1239 heavy class pipes properly fixed in walls / top slab of tanks. The entire fittings shall be hot dipped galvanized after fabrication. Length shall be minimum 600 millimeter or wall thickness plus 200 millimeter on either side (which ever is more). Each Puddle shall be flange at outer side for connection of pipe / fittings. All work Complete as per direction of the Engineer-in-Charge. i) 25 mm dia

ii) 50 mm dia

iii) 65mm dia

iv) 80mm dia

v) 100mm dia

vi) 150mm dia

vii) 200mm dia

Royalty Charges for various building construction bonified materials which are used for government bonafied works and for which royalty charges are to be paid by the contractor. (This item is to be paid to the contractor only after he pays the royalty amount to revenue department and produces the required voucher.

Royalty Cess 2.00%

Contrubution towards district minarals foundation at the rate of 10 percent of prevlling rate of royalty for various building construction bonafied materials which are used for government bonafied works and for which royalty is to be paide by the contractor.

Laboratory Testing Charges for Various materials required for items of work, on the basis of testing frequency and charges fixed by vigilance and quality Control Circle, Pune. SOIL & MURUM - SOIL / MURUM Compaction Test (Proctor Density).

SOIL / MURUM Liquid limit & plastic Limit test.

SOIL / MURUM Field Density test by Sand Replacement Method.

SOIL / MURUM Sieve Analysis test.

CONCRETE Compressive Strength OF Cement Concrete Cube (Set of 3 cubes) test.

Concrete Mix Design (With all Tests on basic materials).

BASIC TEST OF AGGREGATE. Sieve Analysis test.

BASIC TEST OF AGGREGATE. Flakiness Index/ Elongation Index test.

FINE AGGREGATES. Fineness Modulus (Sieve Analysis),Silt & Clay Content test.

BASIC TEST OF AGGREGATE. Water Absorption, Specific Gravity,Impact Value Crushing Value test.

BASIC TEST OF AGGREGATE. Stripping Value test.

BASIC TEST OF CEMENT.Standard Consistancy Fineness, Specific Gravity, Setting Time ( Initial & Final ), Compressive Strength and Soundness test.

STEEL BAR TESTING Upto 16 mm (Set of 3 Bars)

STEEL BAR TESTING Above 16 mm (Set of 3 Bars) (Tensile strength, %, Elongation, Yield Stress,Weight-Per Meter, Bend / Rebend Test, Proof Stress).

BRICKS Water Absorption (Set of 5 Bricks), Compressive Strength ( Set of 5 Bricks), Efflorescence (Set of 5 Bricks) test.

MORTOR Compressive Strength ( Set of 3 Cubes) test.

CERAMIC TILES / VITRIFIED TILES Water Absorption, Moduls of Rapture (Set of 6 Tiles) test.

FLOORING of Natural stone (Kota/Marble/Granite/Tandur etc.) Water Absorption, Specific Gravity test.

WOOD Density, Moisture Content test.

CONCRETE PAVING BLOCKS Compressive Strength,Water Absorption test (Set of 8 Blocks).

BITUMEN Penetration, Softening Point, Flash & Fire Point and Specific Gravity test.

BITUMEN Viscosity test.

BITUMEN Extraction Test.

G.S.B. Mix Design test.

SOIL / MURUM C.B.R. Test (Lab) with compaction test.

BITUMEN B.M.Job Mix Design with all Tests on aggregate (Excluding bitumen).

Density test of Bituminous Core.

Sieve analysis of Bituminous mix (2 Samples of extraction for one sieve analysis including extraction)

STONE/ RUBBLE Crushing Value/ Compressive Strength,Water Absorption & Specific Gravity test.

diesel generating set with alternator of 250 kVA output continuous rating, 3 Phase, 415 V, 50c/s 0.8 p. f. A.C supply, a totally enclosed air cooled / liquid cooled multi-cylinder diesel engine developing suitable BHP at 1500 rpm with 10% overload for 1 hour in 12 hours, along with standard accessories, self-excited, self-regulated, screen protected alternator with static excitation system running at 1500 RPM as per IS 4722-2001 with voltage regulation +/- 5 %, with performance class G2 and maximum fuel consumption 42.30 Ltr/hr @75% loading. Both the engine and alternator direct coupled on a common fabricated steel base frame and mounted on anti-vibrating pads with standard control panel comprising meters, switchgears, indicators connected with suitable wires/cables, the complete set enclosed in composite Acoustic enclosure as fully assembled integral unit made of 16 SWG CRCA Sheet, sound absorbing material to restrict sound level up to 75 dB at 1.0 m, provided with first filling of oil, diesel not less than 425 Ltr etc. on provided M20 Grade CC Foundation and obtaining necessary approval from Electrical Inspector as per specification no. GEN-DG [11-1-18]

diesel generating set with alternator of 320 kVA output continuous rating, 3 Phase, 415 V, 50c/s 0.8 p. f. A.C supply, a totally enclosed air cooled / liquid cooled multi-cylinder diesel engine developing suitable BHP at 1500 rpm with 10% overload for 1 hour in 12 hours, along with standard accessories, self-excited, self-regulated, screen protected alternator with static excitation system running at 1500 RPM as per IS 4722-2001 with voltage regulation +/- 5 %, with performance class G2 and maximum fuel consumption 54.89 Ltr/hr @75% loading. Both the engine and alternator direct coupled on a common fabricated steel base frame and mounted on anti-vibrating pads with standard control panel comprising meters, switchgears, indicators connected with suitable wires/cables, the complete set enclosed in composite Acoustic enclosure as fully assembled integral unit made of 16 SWG CRCA Sheet, sound absorbing material to restrict sound level up to 75 dB at 1.0 m, provided with first filling of oil, diesel not less than 480 Ltr etc. on provided M20 Grade CC Foundation and obtaining necessary approval from Electrical Inspector as per specification no. GEN-DG [11-1-19]

microprocessor based AMF panel suitable for diesel generating set of above 200 kVA up to 250 kVA capacity Three phase, 415 Volts, 50Hz A.C. with all standard features, safeties etc as per specification no. GEN-AMF. [11-2-15]

microprocessor based AMF panel suitable for diesel generating set of above 250 kVA up to 320 kVA capacity Three phase, 415 Volts, 50Hz A.C. with all standard features, safeties etc as per specification no. GEN-AMF. [11-2-16]

Supplying, installing & testing Supplying, installing & testing maintenance free earthing comprising of Electrode of 17.2 mm diameter Low Carbon Steel with 250 micron molecular copper bonded earthing rod of Length 3m along with 25 kg Carbon based environment friendly back fill ground enhancing compound required to fill up the excavated earth with required quantity complete, and recording the results Specification no. EA-MOBI

Supplying and erecting Supplying and erecting copper strip of high purity required size used for earthing on wall and/or any other purpose with necessary copper clamps fixed on wall painted with bituminous paint with joints required. As per specification no. EA-EP.

Supplying and erecting Supplying and erecting GI strip of high purity required size used for earthing on wall and/or any other purpose with necessary GI clamps fixed on wall painted with bituminous paint with joints required. As per specification no EA-EP.

Supplying and erecting Supplying and erecting GI wire of high purity of required sizes used for earthing or any other purposes on wall with necessary G. I. Clamps fixed on wall/cable/ conduit with screws complete.

Supplying and erecting Supplying and erecting conventional spike type air termination suitable to carry lightning stroke made up of heavy gauge 40 mm dia copper pipe of standard length with 5 Nos. copper spikes fixed on copper ball as air terminals duly threaded in copper pipe erected on provided foundation complete.

Supplying and laying (including excavation) Supplying and laying (including excavation) reinforced cement concrete pipe of IS 458:2003 NP-2 class of 250 mm internal diameter in proper line, level and slope including providing and fixing collars in cement mortar 1:2 and curing etc. complete.

Supplying, erecting and marking Supplying, erecting and marking SPMCB 6A to 32A, C-series with rated short - circuit breaking capacity (Icn) 10kA in provided distribution board as per specification no. SW-SWR/MCB

Supplying, erecting and marking Supplying, erecting and marking SPMCB 6A to 32A, B-series with rated short - circuit breaking capacity (Icn) 10kA in provided distribution board as per specification no. SW-SWR/MCB

Supplying, erecting and marking Supplying, erecting and marking SPMCB 40A to 63A, C-series with rated short - circuit breaking capacity (Icn) 10kA in provided distribution board as per specification no. SW-SWR/MCB

Supplying, erecting and marking Supplying, erecting and marking TPMCB 6A to 32A, with rated short - circuit breaking capacity (Icn) 10kA in provided distribution board as per specification no. SW-SWR/MCB

Supplying, erecting and marking Supplying, erecting and marking TPMCB 40A to 63A, with rated short - circuit breaking capacity (Icn) 10kA in provided distribution board as per specification no. SW-SWR/MCB

Supplying, erecting and marking Supplying, erecting and marking FPMCB 6A to 32A, with rated short - circuit breaking capacity (Icn) 10kA in provided distribution board as per specification no. SW-SWR/MCB

Supplying, erecting and marking Supplying, erecting and marking FPMCB 40A to 63A, with rated short - circuit breaking capacity (Icn) 10kA in provided distribution board as per specification no. SW-SWR/MCB

Supplying and erecting Supplying and erecting triple pole and neutral distribution board (TPNDB), SPMCB of 4 ways/phase (12 poles), with door, 1.2mm thickness, surface/flush mounted, IP 43 protection on iron/GI frame (horizontal busbar type) as per specification no. SW-SWR/MCBDB

Supplying and erecting Supplying and erecting triple pole and neutral distribution board (TPNDB), SPMCB of 8 ways / phase (24 poles), with door, 1.2mm thickness surface/ flush mounted, IP 43 Protection on iron/GI frame (horizontal busbar type) as per specification no. SW-SWR/MCBDB

Supplying and erecting Supplying and erecting triple pole and neutral distribution board (TPNDB), SPMCB of 12 ways /phase (36 poles), with door, 1.2mm thickness surface/flush mounted, IP 43 Protection on iron/GI frame (horizontal busbar type) as per specification no. SW-SWR/MCBDB

Supplying and erecting Supplying and erecting triple pole and neutral distribution board (TPNDB), SP/TP MCBs total 4 ways /12 Poles, with door, 1.2mm thickness surface/flush mounted, IP 43 Protection on iron/GI frame (vertical busbar type) as per specification no. SW-SWR/MCBDB

Supplying and erecting Supplying and erecting triple pole and neutral distribution board (TPNDB), SP/TP MCBs total 12 ways /36 poles, with door, 1.2mm thickness surface/flush mounted, IP 43 Protection on iron/GI frame (vertical busbar type) as per specification no. SW-SWR/MCBDB

Supplying and erecting Supplying and erecting single pole and neutral distribution board (SPNDB), with 2 ways for incoming and 6 ways (6 poles) for outgoing SP MCBs, with door, 1.2mm thickness surface / flush mounted, IP 43 Protection on iron / GI frame as per specification no. SW-SWR/MCBDB

Supplying and erecting Supplying and erecting single pole and neutral distribution board (SPNDB), with 2 ways for incoming and 10 ways (10 poles) for outgoing SP MCBs, with door, 1.2mm thickness surface / flush mounted, IP 43 Protection on iron / GI frame as per specification no. SW-SWR/MCBDB

Supplying and erecting Supplying and erecting blanking plate of suitable size on MCBDB.

Supplying and erecting Supplying and erecting triple pole and neutral distribution board (TPNDB), 3 pole/4 pole MCCB as incomer & outgoing SP MCB (36 poles) or TP MCB of 12 ways (36 poles), with door, 1.2mm thickness, surface/flush mounted, on iron/GI frame (vertical busbar type) as per specification no. SW-SWR/MCBDB1

Providing and erecting Providing and erecting 4 Pole MCCB, 415 V, 100A, rated short-circuit breaking capacity 25 kA (Ics=100% of Icu), adjustable thermal (overload) setting and fixed magnetic setting with provided leads, provision for installation of shunt/UV/trip alarm contact. MCCB with phase barriers on both sides, insulation withstand capacity 800V, no line-load bias in provided enclosure/panel as per specification no. SW-SWR/MCCB

Supplying, Erecting and Commissioning of Supplying, Erecting and Commissioning of 2 pole RCCB 16/25A, electromagnetic type with 30/100/300 mA sensitivity with earth leakage trip indication complete as per specification no. SW-RCCB/RCCB

Supplying, Erecting and Commissioning of Supplying, Erecting and Commissioning of 2 pole RCCB 63A, electromagnetic type with 30/100/300 mA sensitivity with earth leakage trip indication complete as per specification no. SW-RCCB/RCCB

Supplying, Erecting and Commissioning of Supplying, Erecting and Commissioning of 4 pole RCCB 16/25A, electromagnetic type with 30/100/300 mA sensitivity with earth leakage trip indication complete as per specification no. SW-RCCB/RCCB

Supplying, Erecting and Commissioning of Supplying, Erecting and Commissioning of 4 pole RCCB 40A, electromagnetic type with 30/100/300 mA sensitivity with earth leakage trip indication complete as per specification no. SW-RCCB/RCCB

Supplying, Erecting and Commissioning of Supplying, Erecting and Commissioning of 4 pole RCCB 63A, electromagnetic type with 30/100/300 mA sensitivity with earth leakage trip indication complete as per specification no. SW-RCCB/RCCB

Supplying and erecting Supplying and erecting quartz electronic time switch having 24 hour dial to work on 250 V 50 cycle AC having built in rechargeable nickel cadmium batteries to run the time switch on failure of supply having switch contact rating up to 16A to use independently or in conjunction with contactor.

Supplying and erecting Supplying and erecting four pole power contactor 430 V, 16 A for time switch complete erected on provided wooden block/ box, with necessary materials.

Supplying, erecting & terminating Supplying, erecting & terminating FR XLPE insulated, galvanised steel formed wire armoured (strip) cable 1100 V, 3½ core 35 sq. mm. aluminium conductor complete erected with glands & lugs, on wall/ trusses/pole or laid in provided trench/ pipe as per specification no. CB-LT/AL

Supplying, erecting & terminating Supplying, erecting & terminating FR XLPE insulated, galvanised steel formed wire armoured (strip) cable 1100 V, 4 core 4 sq. mm. copper conductor complete erected with glands & lugs, on wall/ trusses/ pole or laid in provided trench/ pipe as per specification no. CB-LT/CU

Supplying, erecting & terminating Supplying, erecting & terminating FR XLPE insulated, galvanised steel formed wire armoured (strip) cable 1100 V, 4 core 6 sq. mm. copper conductor complete erected with glands & lugs, on wall/ trusses/ pole or laid in provided trench/ pipe as per specification no. CB-LT/CU

Supplying, erecting & terminating Supplying, erecting & terminating FR XLPE insulated, galvanised steel formed wire armoured (strip) cable 1100 V, 4 core 10 sq. mm. copper conductor complete erected with glands & lugs, on wall/ trusses/ pole or laid in provided trench/ pipe as per specification no. CB-LT/CU

Supplying, erecting & terminating Supplying, erecting & terminating FR XLPE insulated, galvanised steel formed wire armoured (strip) cable 1100 V, 4 core 16 sq. mm. copper conductor complete erected with glands & lugs, on wall/ trusses/ pole or laid in provided trench/ pipe as per specification no. CB-LT/CU

Supplying, erecting & terminating Supplying, erecting & terminating FR XLPE insulated, galvanised steel formed wire armoured (strip) cable 1100 V, 3 core 2.5 sq. mm. copper conductor complete erected with glands & lugs, on wall/ trusses/ pole or laid in provided trench/ pipe as per specification no. CB-LT/CU

Supplying, erecting & terminating Supplying, erecting & terminating FR XLPE insulated, galvanised steel formed wire armoured (strip) cable 1100 V, 3 core 4 sq. mm. copper conductor complete erected with glands & lugs, on wall/ trusses/ pole or laid in provided trench/ pipe as per specification no. CB-LT/CU

Supplying and erecting Supplying and erecting PVC box trunking of size 100x50 mm. with accessories on wall/ceiling as per specification No: WG-MA/BOX .

Supplying and erecting Supplying and erecting HMS PVC conduit FRLS grade 25 mm dia. with necessary accessories in wall/floor with chiselling appropriately as per specification No: WG-MA/CC

Supplying and laying Supplying and laying HMS PVC conduit FRLS grade 25 mm dia with necessary accessories in RCC work/false ceiling/false flooring as per specification No. WG-MA/CC

Supplying and erecting Supplying and erecting 25 mm dia. corrugated flexible polypropylene conduit

Supplying and erecting Supplying and erecting mains with 2x2.5 sq.mm FRLSH copper PVC insulated wire laid in provided conduit/trunking/inside pole/Bus bars or any other places. as per specification No: WG-MA/BW

Supplying and erecting Supplying and erecting green colour earthing with 1x 2.5 sq.mm FRLSH copper PVC insulated wire laid in provided conduit/trunking/inside pole/Bus bars or any other places. as per specification No: WG-MA/BW

Supplying and erecting Supplying and erecting mains with 2x4 sq.mm FRLSH copper PVC insulated wire laid in provided conduit/trunking/inside pole/Bus bars or any other places. as per specification No: WG-MA/BW

Supplying and erecting Supplying and erecting green colour earthing with 1x 4 sq.mm FRLSH copper PVC insulated wire laid in provided conduit/trunking/inside pole/Bus bars or any other places. as per specification No: WG-MA/BW

Supplying and erecting Supplying and erecting mains with 3x6 sq.mm FRLSH copper PVC insulated wire laid in provided conduit/trunking/inside pole/Bus bars or any other places as per specification No: WG-MA/BW

Supplying and erecting Supplying and erecting modular type switch 6A / 10A duly erected on provided plate and box with wiring connections complete.

Supplying and erecting Supplying and erecting modular type switch 16A duly erected on provided plate and box with wiring connections complete.

Supplying and erecting Supplying and erecting modular type switch 16 / 20 A with indicator, duly erected on provided plate and box with wiring connections complete.

Supplying and erecting Supplying and erecting modular type 3 pin 6A multi socket with safety shutter, duly erected on provided plate and box with wiring connections complete.

Supplying and erecting Supplying and erecting modular type 3 pin 6 / 16A multi socket with safety shutter, duly erected on provided plate and box with wiring connections complete.

Supplying and erecting Supplying and erecting modular type (two module) electronic step regulator for fan, duly erected on provided plate and box with wiring connections complete.

Supplying and erecting Supplying and erecting modular type blanking plate one module, duly erected on provided plate & box.

Supplying and erecting Supplying and erecting unbreakable concealed type modular switch box with double mounting plate for 2 module duly erected flush to wall with required chiselling and finishing with cement mortar / POP as per required to match the background.

Supplying and erecting Supplying and erecting unbreakable concealed type modular switch box with double mounting plate for 3 module duly erected flush to wall with required chiselling and finishing with cement mortar / POP as per required to match the background.

Supplying and erecting Supplying and erecting unbreakable concealed type modular switch box with double mounting plate for 4 module duly erected flush to wall with required chiselling and finishing with cement mortar / POP as per required to match the background.

Supplying and erecting Supplying and erecting unbreakable concealed type modular switch box with double mounting plate for 6 module duly erected flush to wall with required chiselling and finishing with cement mortar / POP as per required to match the background.

Supplying and erecting Supplying and erecting unbreakable concealed type modular switch box with double mounting plate for 8 module duly erected flush to wall with required chiselling and finishing with cement mortar / POP as per required to match the background.

Supplying and erecting Supplying and erecting unbreakable concealed type modular switch box with double mounting plate for 12 module duly erected flush to wall with required chiselling and finishing with cement mortar / POP as per required to match the background.

Point wiring Point wiring for light/bell hybrid type (Surface type under false ceiling and concealed type for drops & switch boards on walls) in min 20 mm PVC conduit / casing n capping with 1.5 sq.mm. (2+1E) FRLSH grade copper wires, modular type switch, earthing and required accessories as per specification No: WG-PW/HW

Point wiring Point wiring for ceiling fan (Surface type under false ceiling and concealed type for drops & switch boards on walls) in min 20 mm PVC conduit / casing n capping with 1.5 sq.mm. (2+1E) FRLSH grade copper wires, modular type switch, earthing and required accessories as per specification No: WG-PW/HW

Secondary point wiring for additional light/ bell point, concealed type in min 20 mm FRLS grade PVC conduit with 1.5 sq.mm. (2+1E) FRLSH grade copper wires with required accessories as per specification No: WG-PW/CW [1-7-22]

Supplying and erecting Supplying and erecting LED square / circular Max. 7W down lighter/ Panel Light having pressure die-cast aluminium housing, polystyrene diffuser having system lumens output of Min. 770 Lumens, min. efficacy of 110 lumen/W, CRI>80, CCT upto 6500K, Beam Angle of 120 deg., max. ripple of 5%, THD<10%, p.f. >0.95, operating range of 120-270V, surge protection of 2.5 kV, Life class of 50,000 Hrs. at L70B50, including driver, having mounting arrangement with board for surface type or spring loaded mounting clips complete with 3 years warranty.

Supplying and erecting Supplying and erecting LED square / circular Max. 11 W down lighter/Panel Light having pressure die-cast aluminium housing, polystyrene diffuser having system lumens output of Min. 1200 Lumens, min. efficacy of 110 lumen/W, CRI>80, CCT upto 6500K, Beam Angle of 120 deg., max. ripple of 5%, THD<10%, p.f. >0.95, operating range of 120-270V, surge protection of 2.5 kV, Life class of 50,000 Hrs. at L70B50, including driver, having mounting arrangement with board for surface type or spring loaded mounting clips complete with 3 years warranty.

Supplying and erecting Supplying and erecting anodized aluminium corridor / passage / mirror light LED fitting (2 feet) Max. 12W with high transitivity diffuser with min. system lumens output of 1200 lumens, min. efficacy of 100 lumen/W, CRI>80, CCT upto 6000K, Beam Angle of 110 deg., Ripple<5%, THD<10%, p.f. >0.95, operating range of 200-270V, surge protection of 2 kV, Life class of 50,000 Hrs. at L70B50, including driver with end caps on provided PVC Block / wooden board with 3 years warranty.

Supplying and erecting Supplying and erecting ready to use Retrofit T8 LED 18 / 20 tube light with polycarbonate body, heat sink, integrated HF electronic driver complete & compatible to T8 / T12 LED luminaire by disconnecting starter & ballast if necessary.

Supplying and erecting Supplying and erecting ding dong / electronic musical type call bell with heavy duty coil suitable to operate on 230V A.C. supply erected on polished double wooden block/sunmica block of suitable size.

Supplying and erecting Supplying and erecting 3W, 230V integral type LED Lamp suitable for B-22 / E-27 base.

Supplying and erecting Supplying and erecting LED square / circular Max. 25 W down lighter/ Panel Light having pressure die-cast aluminium housing, polystyrene diffuser having system lumens output of Min. 2750 Lumens, min. efficacy of 110 lumen/W, CRI>80, CCT upto 6500K, Beam Angle of 120 deg., max. ripple of 5%, THD<10%, p.f. >0.95, operating range of 120-270V, surge protection of 2.5 kV, Life class of 50,000 Hrs. at L70B50, including driver, having mounting arrangement with board for surface type or spring loaded mounting clips complete with 3 years warranty.

Supplying and erecting Supplying and erecting LED Panel Light(600mm X 600mm) Max. 35 W having CRCA powder coated housing, polystyrene diffuser having system lumens output of Min 4200 Lumens, min. efficacy of 120 lumen/W, CRI>80, CCT upto 6500K, Beam Angle of 120 deg., max. ripple of 5%, THD<10%, p.f. >0.95, operating range of 120-270V, surge protection of 2.5 kV, Life class of 50,000 Hrs. at L70B50 including driver, having mounting arrangement with board for surface type or spring loaded mounting clips complete with 3 years warranty.

Supplying and erecting Supplying and erecting LED Strip light 5m Length Max. 45 W IP20 class having minimum lumens output of 800 Lumens/m, min. efficacy of 90 lumen/W, CRI>80, CCT upto 5000K, Beam Angle of 110 deg., THD<10%, p.f. >0.95, operating range of 230-270V, Life class of 30,000 Hrs. at L70B50, including driver with 1 year warranty.

Supplying Supplying LED concealed type foot / step light with aluminium body for indoor/outdoor application suitable for 4W-6W LED including driver and erecting by making necessary arrangement / recess in wall to make it flush with surface with 1 year warranty.

Supplying and erecting Supplying and erecting inverter LED batten 20W tube light fitting with polycarbonate housing, heat sink, integrated HF electronic driver, Min. 2600 mAh Lithium ion Battery with charging time of 8-10 Hours and backup time of Min. 3 hrs. with minimum 25% of initial Watts having luminous efficacy of 100 lumen/watt, CRI>80, CCT of 6500K and THD<=20% having useful life of minimum 25000 hrs. with overheating protection with 2 years warranty.

Supplying and erecting Supplying and erecting fan hook box of 10 mm M.S. round bar bounded to the R.C.C. bars upto 50 mm length each side and pierced through a 16 S.W.G. thick aluminium/M.S. Bowl 100 mm dia. or equivalent square size and having depth upto 75 mm complete erected with duly painted by one coat of red oxide paint and two coats of paint erected in position and without any leakage of slurry of cement concrete on either side of the box and positioned to the bottom level of the slab.

Supplying and erecting Supplying and erecting ‘B’ class G.I .pipe / M.S. pipe down rod duly painted for fan complete erected with PVC three core flexible cable 1 sq. mm copper PVC wire.

Supplying and erecting Supplying and erecting Energy Saving BLDC Ceiling fan 230 V A.C. 50 cycles 1200 mm, max. energy consumption of 28W having service ratio (CMM/W) of Min. 8 , PF>0.9, THD<10% without IR remote control/compatible speed regulator, Temperature Rise of Max. 40 deg. C, having external mounted control PCB completely erected in position as per specification no. FG-FN/CF

Supplying and erecting Supplying and erecting fresh air cum exhaust fan of light duty 250 V A.C. 50 cycles 225mm. 1400 RPM rust proof body & blades, wire mesh, duly erected, complete.

Providing and erecting Providing and erecting hot dipped galvanised ladder type cable tray manufactured from 16 SWG (1.6 mm thick) GI sheet of 200 mm width & 75 mm height complete with necessary coupler plates & hardware.

Supplying, installing, testing and commissioning of Supplying, installing, testing and commissioning of 20kVA capacity online pure sine wave, with backup time of ....... hrs. PWM & IGBT based UPS with 0.9 to unity output pf, 3 phase input and 3 phase output complete with all protections as per specification no. AP-UPS

Supplying and erecting Supplying and erecting 12V/42Ah SMF battery with battery terminal wire, duly charged with 24 months warranty complete

Supplying and erecting Supplying and erecting iron work, sheet metal work consisting of CRCA sheets, various sections of iron, plates, chequered plates, rods, bars, MS pipes, etc. for panel board or any other purpose with bending, cutting, drilling and welding complete erected at the position with necessary materials duly painted with one coat of red oxide and two coats of enamel paint to match the switchgears or as per directions by the authority.

Supplying and erecting Supplying and erecting Supply Installation testing and commissioning of cubical type MV Panel conform to IEC:61439-I as per technical specifications single line diagram & approval of Drawings prior to manufacturing packed in wooden crates with PVC sheets inner packing transport to site compartmental cubicle type freestanding with appropriate cable entries front operating front maintained wherever required complete with base frame etc. erected in 14 gauge CRCA sheet and surface treated with phosphating seven tank process and duly powder coated with MSEDCl approved color feeder piller should be with supporting angles self-locks gasket and slanting top to be erected on provided foundation Panel Details :- Name - Utility Panel Girls and Boys Hostel Duty -Duty: Indoor Type (IP 42) Incomer-1 Nos of 315A FP MCCB Busbar - 315A TPN Al Busbar Outgoings - 13 Nos of 63A TP MCCB 2 Nos of 100A TP MCB 3 Nos of 16A TP MCB

Supplying and erecting Supplying and erecting Supply Installation testing and commissioning of cubical type MV Panel conform to IEC:61439-I as per technical specifications single line diagram & approval of Drawings prior to manufacturing packed in wooden crates with PVC sheets inner packing transport to site compartmental cubicle type freestanding with appropriate cable entries front operating front maintained wherever required complete with base frame etc. erected in 14 gauge CRCA sheet and surface treated with phosphating seven tank process and duly powder coated with MSEDCl approved color feeder piller should be with supporting angles self-locks gasket and slanting top to be erected on provided foundation Name - Utility Panel Office Bldg Duty -Duty: Indoor Type (IP 42) Incomer-1 Nos of 315A FP MCCB Busbar -315A TPN Al Busbar Outgoings - 8 Nos of 63A TP MCCB 13 Nos of 40A TP MCB 6 Nos of 25A TP MCB

Supplying and erecting Supplying and erecting Supply Installation testing and commissioning of cubical type MV Panel conform to IEC:61439-I as per technical specifications single line diagram & approval of Drawings prior to manufacturing packed in wooden crates with PVC sheets inner packing transport to site compartmental cubicle type freestanding with appropriate cable entries front operating front maintained wherever required complete with base frame etc. erected in 14 gauge CRCA sheet and surface treated with phosphating seven tank process and duly powder coated with MSEDCl approved color feeder piller should be with supporting angles self-locks gasket and slanting top to be erected on provided foundation Name - Utility Panel Museum Bldg Duty -Duty: Indoor Type (IP 42) Incomer-1 Nos of 20A FP MCCB Busbar -200A TPN Al Busbar Outgoings - 10 Nos of 40A TP MCB , 7 Nos of 25A TP MCB 3 Nos of 6A TP MCB 4 Nos of 10A SP MCB

Supplying and erecting Supplying and erecting Supply Installation testing and commissioning of cubical type MV Panel conform to IEC:61439-I as per technical specifications single line diagram & approval of Drawings prior to manufacturing packed in wooden crates with PVC sheets inner packing transport to site compartmental cubicle type freestanding with appropriate cable entries front operating front maintained wherever required complete with base frame etc. erected in 14 gauge CRCA sheet and surface treated with phosphating seven tank process and duly powder coated with MSEDCl approved color feeder piller should be with supporting angles self-locks gasket and slanting top to be erected on provided foundation HVAC Panel Incomer: 250A FP MCCB Busbar: 250A AL busbar. Outgoing: 3 No of 40A TP MCB 10 Nos 25A FP MCB 3 Nos 16A FT MCB

Supplying, erecting, testing and commissioning of Supplying, erecting, testing and commissioning of self contained water cooler 230/250V 50Hz nominal cooling capacity of 150 litres per hour and storage capacity 150 litres with partially stainless steel body as per specification no. AP-WCR/WC

Supplying and erecting Supplying and erecting ultra violet storage type water purifier (RO+UV+UF) with softener for safe drinking water consisting of UV germicidal tube of 8W capacity choke made of copper wire and two indicator lamps with output of purified water minimum 0.33 litre/min with activated carbon filter and softener operating on 230V, single phase A.C. supply with UV fail & filter change indication system .(for TDS more than 200)

Supplying and erecting Supplying and erecting Dewatering Monoblock pump set 415V, 3 phase, 50C/s, A.C. supply of 2.25KW/ 3 H.P., of 12 to 26 m head with 560 to 70 LPM discharge, 10.5mm Solid Handling Capacity, non clogging minimised abrasive wear, large impeller clearance & maintenance free pump set with water proof cable duly sealed with epoxy material built in protection to prevent the motor from burn out due to abnormal operation. specially designed high efficiency motor with F class insulation & the pump mechanically sealed in the oil chamber,. etc. complete as per specification no. DWP- SMP

Supplying and erecting Supplying and erecting D.O.L Starter suitable for 415 V, 3 phase 50 cycles with no volt coil and overload element with necessary materials and connected to supply up to 7.5 H.P.

Supplying and erecting Supplying and erecting pump protection relay comprising current sensing phase failure and UV+OV relay with dry run and overload protection suitable for 3 phase pumps.

Supplying and erecting Supplying and erecting Water level controller 230/415 V, A.C. , Two way under ground tank operation only.

Supplying and erecting Supplying and erecting Water level controller 230/415 V, A.C. , Four way under ground & Over head tank operation only.

Supplying and erecting Supplying and erecting PVC coated 5 mm dia. Brass sensor/ electrode duly wired with nuts & bolts complete (Set of 3 Nos)

Supplying and erecting Supplying and erecting non return valve 25 mm dia in position made of gun metal complete.

Supplying and erecting Supplying and erecting non return valve 50 mm dia in position made of gun metal complete.

Supplying and erecting Supplying and erecting non return valve 65 mm dia in position made of gun metal complete.

Supplying and erecting Supplying and erecting Providing & Fixing 40mm dia. Y Strainer (screwed / flanged) with stainless steel fin wire mesh perforated sheet basket with necessary flange / uionons nuts bolts and wahsers complete as required. All work Complete as per direction of the Engineer-in-Charge. (R.A CPWD Electrical -2018 16.7.4.8)

Supplying and erecting Supplying and erecting Providing & Fixing 50mm dia. Y Strainer (screwed / flanged) with stainless steel fin wire mesh perforated sheet basket with necessary flange / uionons nuts bolts and wahsers complete as required. All work Complete as per direction of the Engineer-in-Charge. (R.A CPWD Electrical -2018 16.7.4.7)

Supplying and erecting Supplying and erecting Providing & Fixing 65mm dia. Y Strainer (screwed / flanged) with stainless steel fin wire mesh perforated sheet basket with necessary flange / uionons nuts bolts and wahsers complete as required. All work Complete as per direction of the Engineer-in-Charge. (R.A CPWD Electrical -2018 16.7.4.6)

Supplying and erecting Supplying and erecting Supplying fixing testing and commissioning of following sizes 65mm dia Motorized Butter fly Valve with CI Body SS Disc O - ring and minimum PN-16 pressure rating conforming to BS 5155 IS 13095 with IP-55 actuator capable of accepting upto 10V DC and upto 20mA electric signal and providing similar transduced feedback output to control system as required. (R.A CPWD Electrical -2018 16.11.3.9)

Supplying and erecting Supplying and erecting Supplying fixing testing and commissioning of following sizes 50mm dia Motorized Butter fly Valve with CI Body SS Disc O - ring and minimum PN-16 pressure rating conforming to BS 5155 IS 13095 with IP-55 actuator capable of accepting upto 10V DC and upto 20mA electric signal and providing similar transduced feedback output to control system as required. (R.A CPWD Electrical -2018 16.11.3.10)

Supplying and erecting Supplying and erecting Supply installation testing and commissioning of Skid mounted Hydro-pneumatic system of Vertical in line pump set with Variable Frequency Drive . Domestic Water Supply System For Building - (Location - Pump Room) Capacity per pump - 150 lpm Head - 60 meter (Approx. 4.5hp /pump) Pump Qty - 3 (2 working +1 stand by / Duty Assist) Siemens switch gear make control panel along with PLC PID Controller with all necessary cascade system automation Power & Control MCB MPCB Over load \ Under load SPP \ RPP Dry run and all necessary pump & voltage protection Indication lamp Digital Pressure indicator cum controller. Danfoss make Pressure Transmitter & Pressure switch Gauge Pressure Tank etc. Skid for pumpset with Hot deep Galvnised Suction & Delivery Header Plumbing Accessories along with Ball Valve NRV Y type Strainer Polycab make power cable for pumpset & Control cable float switch sensor control cable for sensor etc complete as per direction of Engineer-in-charge. Pumpset & Control Pannel shall be company assembled factory fitted system with test certificate should be submitted. Vendor to submit performance curves and technical catalog of the proposed model for review & approval by consultants.

Supplying and erecting Supplying and erecting Supply installation testing and commissioning of Skid mounted Hydro-pneumatic Drinking Water Supply System For Building - (Location - Pump Room) Capacity per pump - 125 lpm Head - 60 meter (Approx. 3.7hp /pump) Pump Qty - 2 (1 working+1 stand by / Duty Assist) Siemens switch gear make control panel along with PLC PID Controller with all necessary cascade system automation Power & Control MCB MPCB Over load \ Under load SPP \ RPP Dry run and all necessary pump & voltage protection Indication lamp Digital Pressure indicator cum controller. Danfoss make Pressure Transmitter & Pressure switch Gauge Pressure Tank etc. Skid for pumpset with Hot deep Galvnised Suction & Delivery Header Plumbing Accessories along with Ball Valve NRV Y type Strainer Polycab make power cable for pumpset & Control cable float switch sensor control cable for sensor etc complete as per direction of Engineer-in-charge. Pumpset & Control Pannel shall be company assembled factory fitted system with test certificate should be submitted. Vendor to submit performance curves and technical catalog of the proposed model for review & approval by consultants.

Supplying and erecting Supplying and erecting Supply installation testing and commissioning of Skid mounted Hydro-pneumatic Flushing Water Supply System For Building - (Location - Pump Room) Capacity per pump - 125 lpm Head - 60 meter (Approx. 3.7hp /pump) Pump Qty - 3 (2 working+1 stand by / Duty Assist) Siemens switch gear make control panel along with PLC PID Controller with all necessary cascade system automation Power & Control MCB MPCB Over load \ Under load SPP \ RPP Dry run and all necessary pump & voltage protection Indication lamp Digital Pressure indicator cum controller. Danfoss make Pressure Transmitter & Pressure switch Gauge Pressure Tank etc. Skid for pumpset with Hot deep Galvnised Suction & Delivery Header Plumbing Accessories along with Ball Valve NRV Y type Strainer Polycab make power cable for pumpset & Control cable float switch sensor control cable for sensor etc complete as per direction of Engineer-in-charge. Pumpset & Control Pannel shall be company assembled factory fitted system with test certificate should be submitted. Vendor to submit performance curves and technical catalog of the proposed model for review & approval by consultants.

SITC of Electric Traction Passenger Lift with · Rated capacity :- 10 Passenger/680Kg · Floors :- G+12 floor (13 Stops/13 Landings) · Travel :- 21 to 29.4 mtrs · Location of Lift Machine:- MR/MRL · Rated speed :- 1.5mps VS · Car/Landing door clear opening of 900 mm wide x 2000 mm high · Clear Car size of 1300 mm wide x 1350 mm deep x 2250mm high · Lift shaft available having clear size of 2000 mm wide x 2000 mm deep, 1500 mm Pit depth, 4500 mm Overhead. · Doors type :- COPO/TOPO Doors with frame made from SS 304 grade solid(non-cladded) sheet of 1.5mm thick in hairline finish for car and all landing doors with SS door architraves/frames The lift doors shall have minimum 1 hour fire rating (with submission of necessary valid test certificate issued by NABL accredited or Independent test laboratory). · Lift car enclosure made from SS 304 grade solid (non-cladded) sheet of 1.5mm, thick with hairline finish with frame made from MS girders, bracing of adequate size with minimum safety factor of 5, with Toe Guard Apron, with necessary false ceiling with adequate LED lights, blower/fan for ventilation & SS chequered plate flooring, handrails, mirror, emergency light etc. The lift car interior design shall be done as per the directions of engineer in charge. · COP with SS face plate having metallic push buttons with Braille code & luminous indicator around button with FPI, scrolling UP/DN LED indicator & with / without attendant key switch, OWD with audio-visual alarm, VAS in Marathi, Hindi & English with intercom system with telephone instrument in Lift car, LMR & FCC/ground floor. · LOP with SS face plate having recess/surface push button box for all landings with scrolling UP/DN LED indicator having metallic push buttons with Braille code & luminous indicator around button with CPI, Lift car arrival & next travel direction audio-visual indication at all landings. · Lift controller of simplex full collective based on microprocessor/ PLC with VVVF Drive having closed loop control system, with IBMS compatible having necessary port. The controller shall have necessary protections such as overcurrent, overvoltage, over speed, overheat for all devices including lift motor and travel direction protection, protection for phase loss at input or output etc. ,various operation modes such as maintenance, change direction by attendant, full load bypass, VIP call operation, self levelling operation, call cancel facility, auto return to home landing, fireman evacuation operation, earthquake operation, door open/close operation from COP etc. The system can record information for minimum 30 latest faults, with real-time clock management and handheld keypad with LCD screen for view and setting of parameters, The control panel duly wired with proper size & strength, copper wire for power & control circuit, with provision for addition of floor/control card & allied accessories control panel having enclosure of 1.5mm CRCA sheet with powder coating with IP54 Protection class. · ARD complete with necessary SMF VRLA batteries. · Fireman controller having fireman switch at fire Landing. · CCTV surveillance system comprises of 2nos minimum 2.0MP FHD IP based vandal proof Dome camera in lift car & in LMR/inside lift shaft top aimed on Lift machinery & controller with NVR kept in LMR/FCC with HDR data backup for min. 90 days with min. 20" FHD TV monitor, to be kept in FCC/LMR as directed by Engineer In Charge. · Lift Machine of Gearless PMSM of suitable kW with duty cycle of minimum 120 starts/hr (with submission of necessary valid test certificate issued by NABL accredited or Independent test laboratory), with Traction pulley, OSG, electromagnetic brakes, entire assembly mounted on adequate size girders duly fixed on LMR floor/ shaft walls complete with main/diverter traction sheaves, suspension wire ropes/belts of adequate size & strength. · Other mechanical parts such as 'T' section adequate size guide rails for car & counter weight with brackets fasteners, counter weight frame with necessary blocks, buffers with necessary support arrangement, MS pit ladder etc. erected with necessary steel work. · Minor civil work such as alteration work if any necessary for erection of landing door frames and it's accessories e.g. sill, header, hole pass etc complete with plaster finish, civil work for erection buffers, erection of lift machinery, adequate size core cuts if required & scaffolding for erecting guide rails, providing and fixing steel girders/RCC work having adequate strength for mounting and hoisting lift machine etc. complete as per specification no. LFT. "· General: - Job includes entire procedure of obtaining all necessary erection permissions & ""License to Work the Lift"" from Electrical Inspector(Lifts) with submission to the Engineer In Charge. · The above rate includes Fully Comprehensive AMC for one year from the date of commissioning." Add on A1 ( 2337800 + ( 148207 x 5 ) = 3078835 ) [17-1-14]

SITC of Electric Traction Passenger Lift with · Rated capacity :- 10 Passenger/680Kg · Floors :- B+ G+4 floor (6 Stops/6 Landings) · Travel :- 22.2 mtrs · Location of Lift Machine:- MR/MRL · Rated speed :- 1.0mps VS · Car/Landing door clear opening of 900 mm wide x 2000 mm high · Clear Car size of 1300 mm wide x 1350 mm deep x 2250mm high · Lift shaft available having clear size of 2000 mm wide x 2000 mm deep, 1500 mm Pit depth 4500…mm Overhead. · Doors type :- COPO/TOPO Doors with frame made from SS 304 grade solid(non-cladded) sheet of 1.5mm thick in hairline finish for car and all landing doors with SS door architraves/frames The lift doors shall have minimum 1 hour fire rating (with submission of necessary valid test certificate issued by NABL accredited or Independent test laboratory). · Lift car enclosure made from SS 304 grade solid (non-cladded) sheet of 1.5mm, thick with hairline finish with frame made from MS girders, bracing of adequate size with minimum safety factor of 5, with Toe Guard Apron, with necessary false ceiling with adequate LED lights, blower/fan for ventilation & SS chequered plate flooring, handrails, mirror, emergency light etc. The lift car interior design shall be done as per the directions of engineer in charge. · COP with SS face plate having metallic push buttons with Braille code & luminous indicator around button with FPI, scrolling UP/DN LED indicator & with / without attendant key switch, OWD with audio-visual alarm, VAS in Marathi, Hindi & English with intercom system with telephone instrument in Lift car, LMR & FCC/ground floor. · LOP with SS face plate having recess/surface push button box for all landings with scrolling UP/DN LED indicator having metallic push buttons with Braille code & luminous indicator around button with CPI, Lift car arrival & next travel direction audio-visual indication at all landings. · Lift controller based on microprocessor/ PLC with VVVF Drive having closed loop control system, with IBMS compatible having necessary port. The controller shall have necessary protections such as overcurrent, overvoltage, over speed, overheat for all devices including lift motor and travel direction protection, protection for phase loss at input or output etc. various operation modes such as maintenance, change direction by attendant, full load bypass, VIP call operation, self levelling operation, call cancel facility, auto return to home landing, fireman evacuation operation, earthquake operation, door open/close operation from COP etc. The system can record information for minimum 30 latest faults, with real-time clock management and handheld keypad with LCD screen for view and setting of parameters. The control panel duly wired with proper size & strength, copper wire for power & control circuit, with provision for addition of floor/control card & allied accessories control panel having enclosure of 1.5mm CRCA sheet with powder coating with IP54 Protection class. · ARD complete with necessary SMF VRLA batteries. · Fireman controller having fireman switch at fire Landing. · CCTV surveillance system comprises of 2 nos minimum 2.0MP FHD IP based vandal proof Dome camera in lift car & in LMR/inside lift shaft top aimed on Lift machinery & controller with NVR kept in LMR/FCC with HDR data backup for min. 90 days with min.18” FHD TV monitor, to be kept in FCC/LMR as directed by Engineer In Charge. · Lift Machine of Gearless PMSM of suitable kW with duty cycle of minimum 120 starts/hr (with submission of necessary valid test certificate issued by NABL accredited or Independent test laboratory), with Traction pulley, OSG, electromagnetic brakes, entire assembly mounted on adequate size girders duly fixed on LMR floor/ shaft walls complete with main/diverter traction sheaves, suspension wire ropes/belts of adequate size & strength. · Other mechanical parts such as 'T' section adequate size guide rails for car & counter weight with brackets fasteners, counter weight frame with necessary blocks, buffers with necessary support arrangement, MS pit ladder etc. erected with necessary steel work. · Minor civil work such as alteration work if any necessary for erection of landing door frames and it's accessories e.g. sill, header, hole pass etc complete with plaster finish, civil work for erection buffers, erection of lift machinery, adequate size core cuts if required & scaffolding for erecting guide rails, providing and fixing steel girders/RCC work having adequate strength for mounting and hoisting lift machine etc. complete as per specification no. LFT. "· General: - Job includes entire procedure of obtaining all necessary erection permissions & ""License to Work the Lift"" from Electrical Inspector(Lifts) with submission to the Engineer In Charge. · The above rate includes Fully Comprehensive AMC for one year from the date of commissioning Add On 1 ( 1299498 + ( 141837 x 4 ) = 1866846 ) [17-1-4]

SITC of Electric Traction Passenger Lift with · Rated capacity :- 8 Passenger/544Kg · Floors :- G+3 floor (4 Stops/4 Landings) · Travel :- 13.8 mtrs · Location of Lift Machine:- MR/MRL · Rated speed :- 1.0 mps VS · Car/Landing door clear opening of 800 mm wide x 2000 mm high · Clear Car size of 1300 mm wide x 1100.mm deep x 2250mm high · Lift shaft available having clear size of 1900.mm wide x 1900 mm deep, .1500 mm Pit depth, 4500 mm Overhead. · Doors type :- COPO/TOPO Doors with frame made from SS 304 grade solid(non-cladded) sheet of 1.5mm thick in hairline finish for car and all landing doors with SS door architraves/frames The lift doors shall have minimum 1 hour fire rating (with submission of necessary valid test certificate issued by NABL accredited or Independent test laboratory). · Lift car enclosure made from SS 304 grade solid (non-cladded) sheet of 1.5mm, thick with hairline finish with frame made from MS girders, bracing of adequate size with minimum safety factor of 5, with Toe Guard Apron, with necessary false ceiling with adequate LED lights, blower/fan for ventilation & SS chequered plate flooring, handrails, mirror, emergency light etc. The lift car interior design shall be done as per the directions of engineer in charge. · COP with SS face plate having metallic push buttons with Braille code & luminous indicator around button with FPI, scrolling UP/DN LED indicator & with / without attendant key switch, OWD with audio-visual alarm, VAS in Marathi, Hindi & English with intercom system with telephone instrument in Lift car, LMR & FCC/ground floor. · LOP with SS face plate having recess/surface push button box for all landings with scrolling UP/DN LED indicator having metallic push buttons with Braille code & luminous indicator around button with CPI, Lift car arrival & next travel direction audio-visual indication at all landings. · Lift controller based on microprocessor/ PLC with VVVF Drive having closed loop control system, with IBMS compatible having necessary port. The controller shall have necessary protections such as overcurrent, overvoltage, over speed, overheat for all devices including lift motor and travel direction protection, protection for phase loss at input or output etc. various operation modes such as maintenance, change direction by attendant, full load bypass, VIP call operation, self levelling operation, call cancel facility, auto return to home landing, fireman evacuation operation, earthquake operation, door open/close operation from COP etc. The system can record information for minimum 30 latest faults, with real-time clock management and handheld keypad with LCD screen for view and setting of parameters. The control panel duly wired with proper size & strength, copper wire for power & control circuit, with provision for addition of floor/control card & allied accessories control panel having enclosure of 1.5mm CRCA sheet with powder coating with IP54 Protection class. · ARD complete with necessary SMF VRLA batteries. · Fireman controller having fireman switch at fire Landing. · CCTV surveillance system comprises of 2 nos minimum 2.0 MP FHD IP based vandal proof Dome camera in lift car & in LMR/inside lift shaft top aimed on Lift machinery & controller with NVR kept in LMR/FCC with HDR data backup min. 90 days with min. 18” FHD TV monitor, to be kept in FCC/LMR as directed by Engineer In Charge. · Lift Machine of Gearless PMSM of suitable kW with duty cycle of minimum 120 starts/hr (with submission of necessary valid test certificate issued by NABL accredited or Independent test laboratory), with Traction pulley, OSG, electromagnetic brakes, entire assembly mounted on adequate size girders duly fixed on LMR floor/ shaft walls complete with main/diverter traction sheaves, suspension wire ropes/belts of adequate size & strength. · Other mechanical parts such as 'T' section adequate size guide rails for car & counter weight with brackets fasteners, counter weight frame with necessary blocks, buffers with necessary support arrangement, MS pit ladder etc. erected with necessary steel work. · Minor civil work such as alteration work if any necessary for erection of landing door frames and it's accessories e.g. sill, header, hole pass etc complete with plaster finish, civil work for erection buffers, erection of lift machinery, adequate size core cuts if required & scaffolding for erecting guide rails, providing and fixing steel girders/RCC work having adequate strength for mounting and hoisting lift machine etc. complete as per specification no. LFT. "· General: - Job includes entire procedure of obtaining all necessary erection permissions & ""License to Work the Lift"" from Electrical Inspector(Lifts) with submission to the Engineer In Charge. · The above rate includes Fully Comprehensive AMC for one year from the date of commissioning." Add On 1 1087600 +( 137031 x 2 ) -=1361662 ) [17-1-3]

Supplying and erecting Supplying and erecting mains with 2x1.5 sq.mm FRLSH copper PVC insulated wire laid in provided conduit/trunking/inside pole/Bus bars or any other places as per specification No: WG-MA/BW

Supplying and erecting Supplying and erecting mains with 2x2.5 sq.mm FRLSH copper PVC insulated wire laid in provided conduit/trunking/inside pole/Bus bars or any other places. as per specification No: WG-MA/BW

Supplying and erecting Supplying and erecting mains with 1x1.5 sq.mm FRLSH copper PVC insulated wire laid in provided conduit/trunking/inside pole/Bus bars or any other places as per specification No: WG-MA/BW

Supplying and erecting Supplying and erecting green colour earthing with 1x 2.5 sq.mm FRLSH copper PVC insulated wire laid in provided conduit/trunking/inside pole/Bus bars or any other places. as per specification No: WG-MA/BW

Supplying and erecting Supplying and erecting modular type switch 6A / 10A duly erected on provided plate and box with wiring connections complete.

Supplying and erecting Supplying and erecting modular type switch 16A duly erected on provided plate and box with wiring connections complete.

Supplying and erecting Supplying and erecting modular type 3 pin 6A multi socket with safety shutter, duly erected on provided plate and box with wiring connections complete.

Supplying and erecting Supplying and erecting modular type 3 pin 6 / 16A multi socket with safety shutter, duly erected on provided plate and box with wiring connections complete.

Supplying and erecting Supplying and erecting PVC Surface modular switch box with double mounting plate for 6 module duly erected.

Supplying and erecting Supplying and erecting modular type (two module) electronic step regulator for fan, duly erected on provided plate and box with wiring connections complete.

Wiring Wiring for plug on board with Switch socket surface/concealed type, copper wiring and earthing and with modular accessories as per specification No: WG-PW/CW

Point wiring Point wiring for ceiling fan in PVC trunking (casing-capping) with 1.5 sq.mm (2+1E) FRLSH grade copper wire, modular type switch, earthing and required accessories as per specification No: WG-PW/SW

Point wiring Point wiring for light/bell/exhaust fan in PVC trunking (casing-capping) with 1.5 sq.mm (2+1E) FRLSH grade copper wire, modular type switch, earthing and required accessories as per specification No: WG-PW/SW

Supplying and erecting Supplying and erecting bulk head LED fitting max. 10W with high transitivity diffuser with system lumens output of min. 1100 lumens, min. efficacy of 110 lumen/W, CRI>80, CCT upto 6500K, Beam Angle of 120 deg., THD<10%, p.f. >0.95, operating range of 140-260V, in built surge protection of 2.5 kV, Life class of 50,000 Hrs. at L70B50, including driver, IP66, IK09 rated on provided PVC Block / wooden board with 3 years warranty.

Supplying and erecting Supplying and erecting CRCA powder coated corridor/passage light LED fitting (4 feet) Max. 17W with high transitivity diffuser with system lumens output of Min. 2000 lumens , min. efficacy of 120 lumen/W, CRI>80, CCT upto 6500K, Beam Angle of 120 deg., Ripple<5%, THD<10%, p.f. >0.95, operating range of 120-270V, surge protection of 4 kV, Life class of 50,000 Hrs. at L70B50, including driver, with end caps on provided PVC Block / wooden board with 3 years warranty.

Providing Providing recess in brick wall suitable for erection of exhaust fan up to 450mm. sweep complete with grouting of nut, bolts, plastering and colour washing to match the colour of the wall for the wall thickness of 225 mm.

Supplying and erecting Supplying and erecting 22 SWG G.I sheet metal cawl sector shaped with 25 x 25 x 3 (mm) angle iron frame, metal mesh to avoid birds entry with necessary material, suitable for exhaust fan of 300 mm as per specification no FG-FAS/MSC

Supplying and erecting Supplying and erecting exhaust fan medium duty 230 V A.C. 50 cycles 225 mm. 1400 RPM with condenser complete erected in position with necessary materials. Fan motor with moisture proof treatment and ‘E’ class insulation.

Supplying and erecting Supplying and erecting Energy Saving BLDC Ceiling fan 230 V A.C. 50 cycles 1200 mm, max. energy consumption of 28W having service ratio (CMM/W) of Min. 8 , PF>0.9, THD<10% with IR remote control/compatible speed regulator, Temperature Rise of Max. 40 deg. C, having external mounted control PCB completely erected in position as per specification no. FG-FN/CF

Supplying, erecting and marking Supplying, erecting and marking SPMCB 6A to 32A, C-series with rated short - circuit breaking capacity (Icn) 10kA in provided distribution board as per specification no. SW-SWR/MCB

Supplying, erecting and marking Supplying, erecting and marking SPMCB 6A to 32A, B-series with rated short - circuit breaking capacity (Icn) 10kA in provided distribution board as per specification no. SW-SWR/MCB

Supplying, Erecting and Commissioning of Supplying, Erecting and Commissioning of 2 pole RCCB 16/25A, electromagnetic type with 30/100/300 mA sensitivity with earth leakage trip indication complete as per specification no. SW-RCCB/RCCB

Supplying and erecting Supplying and erecting single pole and neutral distribution board (SPNDB), with 2 ways for incoming and 6 ways (6 poles) for outgoing SP MCBs, with door, 1.2mm thickness surface / flush mounted, IP 43 Protection on iron / GI frame as per specification no. SW-SWR/MCBDB

Supplying, Erecting and Commissioning of Supplying, Erecting and Commissioning of 4 pole RCCB 63A, electromagnetic type with 30/100/300 mA sensitivity with earth leakage trip indication complete as per specification no. SW-RCCB/RCCB

Supplying and erecting Supplying and erecting CRCA sheet metal one way enclosures of 1.2mm thickness suitable for DP MCB /TP MCB/FP MCB/RCCB/RCBO complete erected on angle iron/GI frame.

Supplying and erecting Supplying and erecting iron work, sheet metal work consisting of CRCA sheets, various sections of iron, plates, chequered plates, rods, bars, MS pipes, etc. for panel board or any other purpose with bending, cutting, drilling and welding complete erected at the position with necessary materials duly painted with one coat of red oxide and two coats of enamel paint to match the switchgears or as per directions by the authority.

Supplying, erecting & terminating Supplying, erecting & terminating FR XLPE insulated, galvanised steel formed wire armoured (strip) cable 1100 V, 2 core 4 sq mm copper conductor complete erected with glands & lugs, on wall/ trusses/pole or laid in provided trench/ pipe as per specification no. CB-LT/CU

Supplying, erecting & terminating Supplying, erecting & terminating FR XLPE insulated, galvanised steel formed wire armoured (strip) cable 1100 V, 4 core 10 sq. mm. copper conductor complete erected with glands & lugs, on wall/ trusses/ pole or laid in provided trench/ pipe as per specification no. CB-LT/CU

Supplying and erecting Supplying and erecting G.I. pipe ‘A’ class 40 mm dia. erected for enclosing XLPE armoured cable on wall/pole as per specification no. CB-CE

Supplying, installing & testing Supplying, installing & testing maintenance free earthing comprising of Electrode of 17.2 mm diameter Low Carbon Steel with 250 micron molecular copper bonded earthing rod of Length 3m along with 25 kg Carbon based environment friendly back fill ground enhancing compound required to fill up the excavated earth with required quantity complete, and recording the results Specification no. EA-MOBI

Supplying and erecting Supplying and erecting annealed bare copper wire of high purity of required sizes used for earthing on wall with necessary copper clamps fixed on wall/cable/conduit with screws complete.

Providing and erecting Providing and erecting 6 m high (clear height) galvanised octagonal pole with foundation bolts having bottom of 130 mm A/F, top 70 mm A/F on provided foundation as per specification no. OH-PL/OPL

Supplying and erecting Supplying and erecting 12.5 m (clear height) motorized high-mast (Top -150mm, Bottom- 360mm) hot dipped galvanized material with average minimum thickness 65 micron, made from high tensile structure grade steel as per BSEN - 10025 S 355/E350 & 3mm thickness, with base plate 25 mm thick x OD 520 mm grade as per IS-2062, pole made in single section & submerge arc welded, with lowering & raising motorized unit, wire rope stainless steel 316 grade 2 nos., 7x19 construction 5mm, SG-DG U clamps, double drum with assembly 250 kg, 5x2.5 Sq.mm. flexible copper cable with lantern carriage assembly suitable for max. 12 nos. luminaires and its control gear box, lightning arrestor, arrangement for fixing aviation light, high-mast with serial number, factory inspection report/test report of high-mast should be provided as per specifications on provided foundation J type stud/bolts with necessary accessories complete as per specification no. OH-PL/HM (excluding luminaries)

Supplying and erecting Supplying and erecting integrated LED street light fitting 40 to 50W IP65 & IK08 class having single piece pressure die-cast aluminium housing, having system lumens output of Min. 4400 Lumens, min. efficacy of 110 lumen/W, CRI>70, CCT upto 6500K,THD<10%, p.f. >0.95, operating range of 140-270V, inbuilt surge protection of 10 kV, Life class of 50,000 Hrs. at L70B50, including driver complete with 3 Years warranty as per specification No FG-ODF/FLS2.

Making M- 20 grade reinforced cement concrete foundation by considering the safe soil bearing capacity at site as 10 T/sq.m at 1.5 m depth including supply of steel, concrete, excavation and fixing provided nut bolts with the help of template, duly plastered as per design complete (for 6m to 8m high octagonal /conical GI pole). [16-3-9]

Supplying and erecting Supplying and erecting outdoor stand mounted feeder pillar for high-mast of the same manufacturer with 32A TPN MCB incomer, 24hr astronomical time switch with minimum 5 years battery backup, IP 54 and IK10 protection, 25 A TP contactor for automatic switching of luminaires, 2 no. 9A contactors and raise/lower push button, and provision for termination of adequate size of incoming and outgoing cables complete erected in min. 14 SWG CRCA sheet box with supporting angles, self lock, gasket and slanting top erected on CC foundation complete.

Making M- 20 cement concrete foundation by considering the safe soil bearing capacity at site as 10 T/sq. m at 2 m depth including excavation and fixing provided nut bolts with the help of template, duly plastered as per design complete (for 12.5 m raising lowering high mast). [16-3-12]

Supplying and erecting Supplying and erecting PVC insulated PVC round sheathed 1.5 sq.mm (30 no. x 0.25 mm dia.) 3 core flexible multi stranded copper Industrial cable for voltage grade up to 1.1 kV

Supplying, erecting & terminating Supplying, erecting & terminating FR XLPE insulated, galvanised steel formed wire armoured (strip) cable 1100 V, 4 core 6 sq. mm. copper conductor complete erected with glands & lugs, on wall/ trusses/ pole or laid in provided trench/ pipe as per specification no. CB-LT/CU

Providing and erecting Providing and erecting galvanised 1000mm single arm sword type bracket with FRP dome and ball as per specification no. OH-PL/PBKT

Providing and erecting Providing and erecting galvanised 1000mm double arm sword type bracket with FRP dome and ball as per specification no. OH-PL/PBKT

Providing Providing pipe type earthing with 40mm. dia. G.I. pipe or 20 mm dia. G.I. Rod complete with all materials testing and recording the results as per specification no. EA-EP

Supplying and erecting Supplying and erecting integrated LED flood light fitting Max. 100W IP65 & IK07 class having pressure die-cast aluminium housing, having system lumens output of Min. 12000 Lumens, min. efficacy of 120 lumen/W, CRI>70, CCT upto 6500K, THD<10%, p.f. >0.90, operating range of 140-270V, inbuilt surge protection of 4 kV, Life class of 50,000 Hrs. at L70B50, including driver with U shaped bracket with 3 Years warranty as per specification No FG-ODF/FLS2.

Providing Providing earthing with galvanized iron earth plate size 60 x 60 x 0.6 cm complete with all materials, testing & recording the results as per specification no. EA-EP

Supplying and laying (including excavation) Supplying and laying (including excavation) of suitable width & depth up to 90 cm) 50 mm outside dia. double wall corrugated pipes (DWC) of HDPE for enclosing cable below ground/road surface, to required depth complete.

Supplying, erecting and marking Supplying, erecting and marking SPMCB 0.5A to 5A, C-series with rated short - circuit breaking capacity (Icn) 10kA in provided distribution board as per specification no. SW-SWR/MCB

Supplying, erecting & terminating Supplying, erecting & terminating FR XLPE insulated, galvanised steel formed wire armoured (strip) cable 1100 V, 4 core 10 sq. mm. aluminium conductor complete erected with glands & lugs, on wall/ trusses/pole or laid in provided trench/ pipe as per specification no. CB-LT/AL

Supplying, installing, testing and commissioning of Supplying, installing, testing and commissioning of main fire pump (MFP / EP) suitable for water discharge of 2280 to 2850 LPM at 90 to 70 m head driven by electric motor 415 volts, 3 phase 50 Hz, AC supply of 55kW or of suitable kW capacity for manual/automatic operation and consisting of following : (a) Horizontal type, single stage, centrifugal/split casing pump of cast iron body & bronze impeller with stainless steel shaft (SS410 grade), mechanical seal conforming to IS 1520. (b) Squirrel cage induction motor, TEFC, synchronous speed 3000 RPM, suitable for operation on with IP 55 protection for enclosure, horizontal foot mounted type with Class-'F' insulation, conforming to IS-325. (c) M.S. fabricated common base plate, coupling, coupling guard, foundation bolts etc. as required. (d) Erected on provided suitable size cement concrete foundation duly plastered with anti vibration pads with perfect aligning, proper levelling complete pump set with accessories duly painted with two coats of synthetic enamel paint of fire red colour over a coat of primer (ISC code 536 as per IS 2932 of 2003) complete, as per specification no. FF-MFP/SSC/EP

Supplying, installing, testing and commissioning of Supplying, installing, testing and commissioning of jockey fire pump (JP) suitable for water discharge of 180 to 240 LPM at 90 to 70 m head driven by electric motor 415 volts, 3 phase 50 Hz, AC supply of 9.3 kW or of suitable kW capacity for manual/automatic operation and consisting of following : (a) Horizontal/vertical type, multi stage, centrifugal casing pump of cast iron body & bronze impeller with stainless steel shaft(SS410 grade), mechanical seal conforming to IS 1520. (b) Squirrel cage induction motor, TEFC, synchronous speed 3000 RPM, suitable for operation with IP 55 protection for enclosure, horizontal foot mounted type with Class-'F' insulation, conforming to IS-325. (c) M.S. fabricated common base plate, coupling, coupling guard, foundation bolts etc. as required. (d) Erected on provided suitable size cement concrete foundation duly plastered with anti vibration pads with perfect aligning, proper levelling complete pump set with accessories duly painted with two coats of synthetic enamel paint of fire red colour over a coat of primer (ISC code 536 as per IS 2932 of 2003)complete, as per specification no. FF-MFP/JP

Supplying, installing, testing and commissioning of Supplying, installing, testing and commissioning of booster fire pump [BP] suitable for water discharge of 450 LPM at 35 m head driven by electric motor 415 volts, 3 phase 50 Hz, AC supply of 5.5 kW or of suitable kW capacity for manual/automatic operation and consisting of following : (a) Horizontal/vertical type, single/multi stage, centrifugal casing pump of cast iron body & bronze/CI impeller with stainless steel shaft (SS410 grade), mechanical seal conforming to IS 1520. (b) Squirrel cage induction motor, TEFC, synchronous speed 3000 RPM, suitable for operation with IP 55 protection for enclosure, horizontal foot mounted type with Class-'F' insulation, conforming to IS-325. (c) M.S. fabricated common base plate, coupling, coupling guard, foundation bolts etc. as required. (d) Erected on provided suitable size cement concrete foundation duly plastered with anti vibration pads with perfect aligning, proper levelling complete pump set with accessories duly painted with two coats of synthetic enamel paint of fire red colour over a coat of primer (ISC code 536 as per IS 2932 of 2003) complete, as per specification no. FF-MFP/BP

Supplying, installing, testing and commissioning of Supplying, installing, testing and commissioning of main fire pump (MFP/DP) suitable for water discharge of 2280 to 2850 LPM at 90 to 60 m head driven by 76 HP or suitable HP capacity diesel engine at required working speed suitable for manual/automatic operation and consisting of following : (a) Horizontal type, single stage, centrifugal casing pump of cast iron body & bronze impeller with stainless steel shaft(SS410 grade), mechanical seal conforming to IS 1520. (b) Water cooled with radiator, diesel engine conforming to relevant IS standard complete with auto starting mechanism, 12/24 volts DC electric starting equipment with battery of required AH capacity with necessary charger suitable to work on 230v, 50Hz AC supply, diesel tank of minimum 150ltr capacity with first filling of diesel up to 100% level with necessary piping with valves up to engine , exhaust pipe extended up to 10 m outside pump house duly insulated with 50 mm thick glass wool with 1.0 mm thick aluminium sheet cladding, residential silencer, instruments and protection as per standard specification, stop solenoid for auto stop in the event of fault with audio indications etc. as required. (c) M.S. fabricated common base plate, coupling, coupling guard, foundation bolts etc. as required. (d) Erected on provided suitable size cement concrete foundation duly plastered with anti vibration pads with perfect aligning, proper levelling complete pump set with engine assembly and accessories duly painted with two coats of synthetic enamel paint of fire red colour over a coat of primer (ISC code 536 as per IS 2932 of 2003) complete, as per specification no. FF-MFP/SSC/DP

Supplying and erecting Supplying and erecting D.O.L Starter suitable for 415 V, 3 phase 50 cycles with no volt coil and overload element with necessary materials and connected to supply up to 7.5 H.P.

Supplying and erecting Supplying and erecting G.I. pipe ‘C’ class ERW 25 mm dia with necessary fittings complete as per specification no. FF-PP

Supplying and erecting Supplying and erecting G.I. pipe ‘C’ class ERW 50 mm dia with necessary fittings complete as per specification no. FF-PP

Supplying and erecting Supplying and erecting G.I. pipe ‘C’ class ERW 65 mm dia with necessary fittings complete as per specification no. FF-PP

Supplying and erecting Supplying and erecting G.I. pipe ‘C’ class ERW 75/80 mm dia with necessary fittings complete as per specification no. FF-PP

Supplying and erecting Supplying and erecting G.I. pipe ‘C’ class ERW 100 mm dia with necessary fittings complete as per specification no. FF-PP

Supplying and erecting Supplying and erecting G.I. pipe ‘C’ class ERW 150 mm dia with necessary fittings complete as per specification no. FF-PP

Providing Providing G.I. pipe ‘C’ class ERW 200 mm dia with necessary fittings complete as per specification no. FF-PP

Providing Providing coating of bitumen paint & 4mm thick wrapping for underground 100 mm ring main of fire fighting system.

Providing Providing coating of bitumen paint & 4mm thick wrapping for underground 150 mm ring main of fire fighting system.

Providing Providing coating of bitumen paint & 4mm thick wrapping for underground 200 mm ring main of fire fighting system.

Excavating hard murum / stone metal road by chiselling for preparing pit for poles stay or earth plates or for laying cables, pipes & clearing the site by removing debris & making the site as required complete. [16-1-6]

Supplying and erecting Supplying and erecting 75/80 mm dia Cast Iron end line strainer of Y-type flanged end pattern, PN16 pressure rating, SS screen, end connection with Flanged / Screwed / Socket Weld / Butt Weld End etc with standard OAR (open area Ratio) for positive suction complete as per specification no. FF-VL/ELS

Supplying and erecting Supplying and erecting 150 mm dia Cast Iron end line strainer of Y-type flanged end pattern, PN16 pressure rating, SS screen, end connection with Flanged / Screwed / Socket Weld / Butt Weld End etc with standard OAR (open area Ratio) for positive suction complete as per specification no. FF-VL/ELS

Supplying and erecting Supplying and erecting 200 mm dia Cast Iron end line strainer of T-Pot type flanged end pattern, PN16 pressure rating, screen of SS and end connection with flanged, for positive suction complete as per specification no. FF-VL/ELS

Supplying and erecting Supplying and erecting 75/80 mm dia. cast iron double flange sluice valve complete with PN16 pressure rating, as per specification no. FF-VL/SV

Supplying and erecting Supplying and erecting 100 mm dia. cast iron double flange sluice valve complete with PN16 pressure rating, as per specification no. FF-VL/SV

Supplying and erecting Supplying and erecting 150 mm dia. cast iron double flange sluice valve complete with PN16 pressure rating, as per specification no. FF-VL/SV

Supplying and erecting Supplying and erecting 200 mm dia. cast iron double flange sluice valve complete with PN16 pressure rating, as per specification no. FF-VL/SV

Supplying and erecting Supplying and erecting 50 mm dia. cast iron double flange butterfly valve of size complete with PN16 pressure rating, as per specification no. FF-VL/BFV

Supplying and erecting Supplying and erecting 65 mm dia. cast iron double flange butterfly valve of size complete with PN16 pressure rating, as per specification no. FF-VL/BFV

Supplying and erecting Supplying and erecting 75/80 mm dia. cast iron double flange butterfly valve of size complete with PN16 pressure rating, as per specification no. FF-VL/BFV

Supplying and erecting Supplying and erecting 100 mm dia. cast iron double flange butterfly valve of size complete with PN16 pressure rating, as per specification no. FF-VL/BFV

Supplying and erecting Supplying and erecting 150 mm dia. cast iron double flange butterfly valve of size complete with PN16 pressure rating, as per specification no. FF-VL/BFV

Supplying and erecting Supplying and erecting 200 mm dia. cast iron double flange butterfly valve of size complete with PN16 pressure rating, as per specification no. FF-VL/BFV

Supplying and erecting Supplying and erecting 75/80 mm dia cast iron double flange NRV complete with PN16 pressure rating, as per specification no. FF-VL/NRV

Supplying and erecting Supplying and erecting 150 mm dia cast iron double flange NRV complete with PN16 pressure rating, as per specification no. FF-VL/NRV

Supplying and erecting Supplying and erecting 75/80 mm dia cast iron double flange ball type NRV complete with PN16 pressure rating, as per specification no. FF-VL/NRV

Supplying and erecting Supplying and erecting 100 mm dia cast iron double flange ball type NRV complete with PN16 pressure rating, as per specification no. FF-VL/NRV

Supplying and erecting Supplying and erecting 150 mm dia cast iron double flange ball type NRV complete with PN16 pressure rating, as per specification no. FF-VL/NRV

Supplying and erecting Supplying and erecting 200 mm dia cast iron double flange ball type NRV complete with PN16 pressure rating, as per specification no. FF-VL/NRV

Supplying and erecting Supplying and erecting 20 mm dia gun metal gate valve complete with PN16 pressure rating, as per specification no. FF-VL/GV

Supplying and erecting Supplying and erecting 25 mm dia gun metal gate valve complete with PN16 pressure rating, as per specification no. FF-VL/GV

Supplying and erecting Supplying and erecting 50 mm dia gun metal gate valve complete with PN16 pressure rating, as per specification no. FF-VL/GV

Supplying and erecting Supplying and erecting stainless steel single outlet hydrant valve fitted with necessary accessories complete as per specification no. FF-VL/HV

Supplying and installing Supplying and installing wall mounting swinging hose reel drum fitted with 19 mm dia. 30m long high pressure polypropylene (Polyhose) along with necessary accessories complete as per specification no. FF-FFA/HV

Supplying and erecting Supplying and erecting 63mm dia, reinforced rubber lined (R.R.L.) hose pipe, 15m in length, fitted with necessary accessories complete as per specification no. FF-FFA/RRL

Supplying and erecting Supplying and erecting stainless steel branch pipe 63 mm dia fitted with 20 mm dia detachable hexagonal nozzle complete as per specifications no. FF-FFA/NZ

Supplying and erecting Supplying and erecting 150 mm dia fire brigade header suitable for supplying water in fire tank complete as per specification no. FF-FA/FBC

Supplying and erecting Supplying and erecting fire brigade header ( Siamese connection )of 150 mm dia, for supplying water in fire tank complete as per specification no. FF-FA/FMC

Supplying and erecting Supplying and erecting 300 mm dia 1.5m in height air vessel / tank fabricated from min 5mm thick M.S. sheet complete as per specification no. FF-FFA/ACT

Supplying and erecting Supplying and erecting 20/25mm dia gun metal air release cock, with necessary G.I. coupling to be fitted on top of air vessel or on wet riser complete as per specification no. FF-FFA/ARV

Supplying and erecting Supplying and erecting 100 mm dia. pressure gauge , 0-300 PSI or 0-14 kg per cm square fitted with 12/15 mm dia. pad cock valve, erected with provided G.I. pipe, elbow etc. complete as per specification no. FF-FFA/PG

Supplying and erecting Supplying and erecting 12/15 mm dia pressure switch with provided isolation valve, G.I. nipple, elbow, etc complete as per specification no. FF-FFA/PS

Supplying and erecting Supplying and erecting brass orifice plate having 6 mm. thickness, 140 mm outer dia with required diameter of inner hole at every single outlet hydrant valve as per specification no. FF-FFA/OP

Supplying and erecting Supplying and erecting M.S./CRCA cabinet for housing Fire Brigade / SIEMESE connections (size 1250 x 400 x 300 mm.) made from 16 SWG sheet and angle iron 25 mm. x 25 mm. x 4 mm. having front doors with viewing glass (8" x 6") and locking arrangement with necessary fixing material such as rubber bidding etc. duly painted in post box red colour( Code 538 of IS 5)

Supplying, erecting, testing and commissioning of Supplying, erecting, testing and commissioning of quartzoid bulb sprinkler, 15 mm (½") dia. NBCM Body chrome finished, 68º C fixed temperature rating with deflector disc of conventional construction complete as per specification no. FF-SPR.

Supplying, erecting, testing and commissioning of Supplying, erecting, testing and commissioning of vane type water flow detector 75/80 mm dia. with 1) Visual switch activation 2) Rugged switch assembly 3) Heavy duty aluminium pipe saddles 4)Durable metal enclosure 5) Steel U bolts for secure mounting 6) Two SPDT ( Single pole double track ) synchronised switches 7) serviceable without draining pipes.

Supplying, erecting, testing and commissioning of Supplying, erecting, testing and commissioning of vane type water flow detector 100 mm dia. with 1) Visual switch activation 2) Rugged switch assembly 3) Heavy duty aluminium pipe saddles 4)Durable metal enclosure 5) Steel U bolts for secure mounting 6) Two SPDT ( Single pole double track ) synchronised switches 7) serviceable without draining pipes.

Supplying and erecting Supplying and erecting fire resistant mortar (20 kg) with fire resistance class S90 as per National Electrical Code (NEC) SP30-2011 suitable to seal the openings of all kinds of cables, pipes and cable support system in steel, aluminium and plastic profiles ( except hollow core conductors). The residual openings shall be closed with filler, as per specification no FF-FRM.

Supplying and erecting Supplying and erecting Carbon Dioxide (CO2) fire extinguisher of 4.5 kg. capacity cartridge type conform to IS 2878 /15683 complete erected with necessary clamp made from 50 x 6 mm. M. S. flat with nut & bolts routed in wall complete.

Supplying and erecting Supplying and erecting Supplying installation testing & commissioning of Sprinkler Flexible Pipe (UL Listed) of stainless steel complete with 15 NPT on reducer thread with maximum working pressure of 175 PSI test pressure of 875 PSI (Burst) with branch line (Inlet) 25mm NPT male thread to sprinkler head (Outlet) 15mm NPT female thread with reducer nipple 2 side brackets center bracket stockbar. The hose assembly includes 1200 mm long 28 mm diameter corrugated stainless steel flexible hose with a braided stainless steel exterior.complete all the work up to the satisfaction of the Engineer in charge.(R.A. CPWD Electrical 18.25.3)

Supplying and erecting Supplying and erecting Supplying installing testing and commissioning standard response Pendent / Upright type sprinkler (Standard coverage) quartzite bulb type with 15mm screwed end connection of 68 deg. C.tempersture rating K-80 and orifice shall not be less than 6mm sprinklers shall be UL listed approved with chrome finished. complete all the work up to the satisfaction of the Engineer in charge. (R.A. CPWD Electrical 18.21.2)

Supplying and erecting Supplying and erecting Supplying installing testing and commissioning standard response Sidewall sprinkler (Standard coverage) quartzite bulb type with 15mm screwed end connection of 68 deg. C.tempersture rating K-80 and orifice shall not be less than 6mm sprinklers shall be UL listed approved with chrome finished. complete all the work up to the satisfaction of the Engineer in charge. (R.A. CPWD Electrical 18.21.3)

Supplying and erecting Supplying and erecting Providing and fixing 150 mm dia installation valve with Hydraulic trim type automatic alarm to be connected with control valve drain and test valve as per manufacturers recommendations . with accessories like water motor gong bell Test & drain valve Flow switch etc UL listed etc complete to satisfaction of Architect/ PM (R.A.CPWD WR (2019) 21.3)

Supplying and erecting Supplying and erecting Supplying installing testing and commissioning of portable fire extinguishers of ABC dry powder stored pressure type fire extinguishers of 6 Kgs.capacity Complete with standard discharge valve with tube CI bracket for wall mounting etc. complete as per confirming to IS : 15683 complete all the work up to the satisfaction of the Engineer in charge.

Supplying and erecting Supplying and erecting Supplying and erecting of Fire Exit Fire Hydrant Hose Box MCP Hooter Fire Alarm Control Panel & Fire Exinguisher signage Indicating the detail (FIRE SIGNAGES)

Supplying and erecting Supplying and erecting Providing laying testing & commissioning of 80mm dia resilient rubber neoprene lined single arch Vibration eliminators (Expansion bellows) suitable for Design Pressure 16 kg/sq cm and test pressure 24 kg/sq cm. complete all the work up to the satisfaction of the Engineer in charge.

Supplying and erecting Supplying and erecting Providing laying testing & commissioning of 150mm dia resilient rubber neoprene lined single arch Vibration eliminators (Expansion bellows) suitable for Design Pressure 16 kg/sq cm and test pressure 24 kg/sq cm. complete all the work up to the satisfaction of the Engineer in charge.

Supplying and erecting Supplying and erecting Providing and fixing 25 mm dia Inspection & Testing Assembly with 25mm gunmetal ball valve gun metal sight glass bypass valve & connected to drain line etc complete as per drawing.

Supplying, installing, testing and commissioning of Supplying, installing, testing and commissioning of beam smoke detector four wire single ended reflected type with 8 " receiver having digital display for easy alignment, adjustable sensitivity & heater kit for transmitter/receiver and reflector with necessary connections on suitable back box. The protection range of beam detector is 5 to 70 m.

Supplying, installing, testing and commissioning of Supplying, installing, testing and commissioning of remote response indicators suitable to operate on 5 - 28 V dc supply having FR Polymer ABS Housing complete as per specification no. FF-FAAS/RRI

Supplying, installing, testing and commissioning of Supplying, installing, testing and commissioning of FR, XLPE armoured cable 4 core 1.5 sq.mm. copper conductor complete erected on wall/ ceiling complete as per specification no. CB-LT/CU

Supplying, installing, testing and commissioning of Supplying, installing, testing and commissioning of micro processor based intelligent addressable main fire alarm panel, central processing unit with the 2 loop capacity and capable of supporting upto 250 devices and detectors per loop, with on-board LCD display with min 16 lines of text, operating at 230 V 50 HZ - AC with inbuilt Battery Backup of a minimum 24 hours in normal condition and 30 min in alarm condition, suitable provision for network connectivity, interfacing with third party equipment via a MODBUS/ OPC/ L-ON interface etc. conforming to IS 15908:2021, IS 2189: 2008, EN 54 & VDS / FM/ UL 864 (10th edition) with 3 years replacement warranty FF-AFAS/CP.

Supplying, installing, testing and commissioning of Supplying, installing, testing and commissioning of micro processor based intelligent addressable main fire alarm panel, central processing unit with the 4 loop capacity and capable of supporting upto 250 devices and detectors per loop, with on-board LCD display with min 16 lines of text, operating at 230 V 50 HZ - AC with inbuilt Battery Backup of a minimum 24 hours in normal condition and 30 min in alarm condition, suitable provision for network connectivity, interfacing with third party equipment via a MODBUS/ OPC/ L-ON interface etc. conforming to IS 15908:2021, ,IS 2189: 2008, EN 54 & VDS / FM/ UL 864 (10th edition) with 3 years replacement warranty FF-AFAS/CP.

Supplying, installing, testing and commissioning of Supplying, installing, testing and commissioning of repeater panel with suitable battery backup of a minimum of 24 hours in normal condition and 30 min in alarm condition, 80 backlit alphanumeric LCD display with inbuilt buzzer to indicate fault/fire alarm, manual control keys for silence/mute and to reset the FACP from the repeater station. Panel size shall not more than 175 x 275 x 65 mm conforming to EN 54 or UL approved with 3 years equipment replacement warranty FF-AFAS/RP

Supplying, installing, testing and commissioning of Supplying, installing, testing and commissioning of addressable optical smoke detector, single/twin LED’s with 360 degree view, suitable for low voltage 15 to 32 V DC two wires supply, in-built locking mechanism to check the removal and pilferage of the detector, in built isolation mode, start up current 300µA and alarm condition current shall be maximum 6.5 mA, operating temperature 0°C to 50°C, humidity 0-95% RH, IP 41, conforming to IS 2189: 2008, 11360_1985_Reff2020 EN 54 or UL Approved with 3 years equipment replacement warranty FF-AFAS/SD .

Supplying, installing, testing and commissioning of Supplying, installing, testing and commissioning of intelligent addressable thermal/heat detector with rate of rise cum fixed temperature thermistor complete with base as required, suitable for temperature variations from -20°C to 38°C for fixed-heat and rate-of-rise type detectors and 0°C to 66°C for high heat type detectors, in built isolation mode, suitable for offices/ceiling cable trenches/less ventilation area's etc. with 3 years equipment replacement warranty IS : 2175 - 1988 reaffirmed 2000, IS 15908:2021 standards FF-AFAS/SD.

Supplying, installing, testing and commissioning of Supplying, installing, testing and commissioning of addressable manual call points ( break glass type/pull station type), made of addressable break glass plastic square in shape surface/flush mounted with "Break Glass" massage embedded on the glass, complete erected with mounting base and required accessories conforming to EN 54 or UL listed with 3 years equipment replacement warranty FF-AFAS/MCP.

Supplying, installing, testing and commissioning of Supplying, installing, testing and commissioning of addressable fire control/relay module complete as required, with 3 years equipment replacement warranty conforming to IS 5051Part 2 (Sec 1 to 3) : 1982 reed relays, EN 54 or UL Listed FF-AFAS/CRM

Supplying, installing, testing and commissioning of Supplying, installing, testing and commissioning of addressable fire monitor module complete as required. EN 54 or UL Listed with 3 years equipment replacement warranty conforming to IS 5051Part 2 (Sec 1 to 3) : 1982 Reed relays FF-AFAS/MM

Supplying, installing, testing and commissioning of Supplying, installing, testing and commissioning of addressable fire isolator module complete as required. EN 54 /FM or UL Listed with 3 years equipment replacement warranty conforming to IS 5051Part 2 (Sec 1 to 3) : 1982 Reed relays FF-AFAS/ISM

Supplying, installing, testing and commissioning of Supplying, installing, testing and commissioning of addressable horn cum strobe sound/ hooter, output frequency 500 to 1000 Hz with dB as per Chart given in IS 15908:2021, with flashing at 1 Hz over the strobe’s entire operating voltage range EN 54, conforming to IS 2189: 2008, IS 15908:2021 standards with 3 years equipment replacement warranty FF-AFAS/SSH.

Supplying and erecting Supplying and erecting HMS PVC conduit FRLS grade 25 mm dia. with PVC accessories on wall /ceiling as per specification No: WG-MA/CON.

Supplying and fixing Supplying and fixing 17U floor mount rack (Dimension-DxWxH – 800x600x954 mm) as per specification No. WG-NAS/RAK

Supplying, erecting, testing and commissioning of Supplying, erecting, testing and commissioning of 1.5 sq. mm speaker wire complete.

Supplying and erecting Supplying and erecting Supply installation testing & commissioning of 6 Watt Cone type Ceiling Mounted metal grill Speakers with line matching transformer Power tapping: 1.5W/3W/6W Frequency response: 100-20000 Hz. SPL (1W 1m) 92 dB including screw clamp mounting with required accessories. (Colour - White)

Supplying and erecting Supplying and erecting Supply Installation testing and commissioning of 6 Watt Box type Wall / Surface Mount Speaker with line matching transformer Power tapping: 1.5W/3W/6W ABS or metal body Frequency response: 100-20000 Hz. SPL (1W 1m) 92 dB including required mounting accessories.

Supplying and erecting Supplying and erecting Supply Installation testing and commissioning of 10 Watt column/wall mount Projector Speaker (uni directional) with line matching transformer Power tapping: 5W/10W fire protected ABS or Metal cabinet includes a steel U-bracket with adjustable inclination and easy installation with required accessories.

Supplying and erecting Supplying and erecting Supply installation testing & commissioning of 6 Zone Voice Alarm PA Controller with built in audio message generator (multi message) 6 Zone 70/100V live outputs for Speaker circuit Fireman Microphone Pre-recorded evacuation messages Should be able to send 2 different pre-recorded messages simultaneously (message should be in 2 languages English & Hindi) Phased evacuation 6 supervised input contact relays for integration with Fire Alarm Control Panel Up to 6 call stations can be connected together with controller. The controller should integrates multiple functions such as audio storage playback zone control audio monitoring scheduled broadcast and fault diagnosis audio playing zone control fault monitoring log recording volume control and amplifier switchover etc. complete with cords connectors & required accessories.

Supplying and erecting Supplying and erecting Supply installation testing & commissioning of 480 Watt high efficiency Power amplifier 70/100V loudspeaker output voltages RMS output power limiter high temperature DC short circuit mains undervoltage protection DC supply undervoltage protection inrush current limiter with cords

Supplying and erecting Supplying and erecting Supply installation testing & commissioning of 240 Watt high efficiency Power amplifier 70/100V loudspeaker output voltages RMS output power limiter high temperature DC short circuit mains undervoltage protection DC supply undervoltage protection inrush current limiter with cords connectors power supply & required accessories.

Supplying and erecting Supplying and erecting Supply installation testing & commissioning of Audio Music Player with built in USB port SD card support MP3 & other audio formats complete with cable cords & required accessories.

Supplying, installing, testing and commissioning of Supplying, installing, testing and commissioning of split type variable speed inverter technology with minimum 3 to 1 convertible mode for compressor, room air conditioning unit 1.0TR to 1.2TR capacity having ISEER minimum 5.00 suitable to operate on 250V, 50 Hz, A.C. supply having 1 no of air handling unit hi-wall/floor mounting type complete with refrigerant R32 having copper condenser, minimum 2.5PM filter, self diagnosis feature, stabilizer free operation & temperature display on indoor unit, noise level maximum 50dBA at position as per specification no. APAC/ WAC

Supplying, installing, testing and commissioning of Supplying, installing, testing and commissioning of split type variable speed inverter technology with minimum 3 to 1 convertible mode for compressor. room air conditioning unit 1.7TR to 2.0TR capacity having ISEER minimum 5.0 suitable to operate on 250V, 50 Hz, A.C. supply having 1 no of air handling unit hi-wall/floor mounting type complete with refrigerant R32 having copper condenser, minimum 2.5PM filter, self diagnosis feature, stabilizer free operation & temperature display on indoor unit, noise level maximum 50dBA at position in provided recess with wooden frame complete specification no. AP-AC/WAC

Supplying and erecting Supplying and erecting seamless outside & inside, smooth, dry and clean copper pipe with ROHS compliant suitable for refrigerant having 22SWG thickness and inner dia/size 16mm complete.

Supplying, erecting, testing and commissioning of Supplying, erecting, testing and commissioning of 14HP, VRF/VRV air conditioning system outdoor unit (ODU) complies type-IV OEM standards working on HFC refrigerant R410A or other required/suitable green equivalent refrigerant, for minimum cooling capacity as delivering 100% capacity at 47° C, non stop cooling even at 56° C and coefficient of performance (COP) 3.00 to 4.00, modular type vertical hot air discharge suitable for longer piping range upto 1000 metre operation in cooling mode with inverter/digital VRF/VRV technology microprocessor based control compressor starter/control panel with scroll compressor, air cooled copper condenser coil of suitable shape for increasing maximum heat transfer area, rain protection cover, built in oil separator, accumulator and oil receiver, copper tube aluminium fin air cooled condenser, condenser fan with motor suitable for 415V±10%, 50 Hz, 3 phase power supply (all suitable for high ambient conditions), internal copper refrigerant piping, internal wiring and refrigerant, etc. all housed in powder coated weather proof cabinet complete.

Supplying, erecting, testing and commissioning of Supplying, erecting, testing and commissioning of 22HP, VRF/VRV air conditioning system outdoor unit (ODU) complies type-IV OEM standards working on HFC refrigerant R410A or other required/suitable green equivalent refrigerant, for minimum cooling capacity as delivering 100% capacity at 47° C, non stop cooling even at 56° C and coefficient of performance (COP) 3.00 to 4.00, modular type vertical hot air discharge suitable for longer piping range upto 1000 metre operation in cooling mode with inverter/ digital VRF/VRV technology microprocessor based control compressor starter/control panel with scroll compressor, air cooled copper condenser coil of suitable shape for increasing maximum heat transfer area, rain protection cover, built in oil separator, accumulator and oil receiver, copper tube aluminium fin air cooled condenser, condenser fan with motor suitable for 415V±10%, 50 Hz, 3 phase power supply (all suitable for high ambient conditions), internal copper refrigerant piping, internal wiring and refrigerant, etc. all housed in powder coated weather proof cabinet complete.

Supplying, erecting, testing and commissioning of Supplying, erecting, testing and commissioning of VRF/VRV based Hi-wall type indoor unit (IDU) of nominal cooling capacity 1.8TR (594 cfm) to 2.2TR (655 cfm) having EER as per BEE standards and specifications with multiple speed evaporator fan with motor, copper tube aluminium fin evaporator coil, washable air filter, insulated drain tray, expansion device, cordless remote control with necessary controls, with 3-core copper flexible cord of required length and electrical terminal to receive power supply, etc. IDU shall have anticorrosive coating suitable for coastal area. Unit shall be suitable for indoor wall mounting, having an electronic control console, provided with suitable mounting brackets with any additional refrigerant and oil charge as per the requirement during installation, connected to the system complete.

Supplying, erecting, testing and commissioning of Supplying, erecting, testing and commissioning of VRF/VRV based ceiling suspended 4 Way cassette room/indoor unit (IDU-compact / standard size) of nominal cooling capacity 2.6TR (918 cfm) to 2.8TR ( 1100 cfm ) having EER as per BEE standards and specifications, suitable as per site requirement with swing louvers and adjustable blades from sides. IDU with drainage arrangements, fan, refrigerant liquid and refrigerant piping, cordless remote control, and fresh air port etc. IDU shall have anti corrosive coating suitable for coastal area in all respects suitable to operate on 1-phase, 230V, 50Hz, AC supply complete. The unit consisting with any additional refrigerant and oil charge as per requirement during installation.

Supplying, erecting, testing and commissioning of Supplying, erecting, testing and commissioning of VRF/VRV based ceiling suspended 4 Way cassette room/indoor unit (IDU-compact / standard size) of nominal cooling capacity 4.1TR (1218 cfm) to 5.0TR (1624 cfm)of suitable cfm having EER as per BEE standards and specifications, suitable as per site requirement with swing louvers and adjustable blades from sides. IDU with drainage arrangements, fan, refrigerant liquid and refrigerant piping, cordless remote control, and fresh air port etc. IDU shall have anti corrosive coating suitable for coastal area in all respects suitable to operate on 1-phase, 230V, 50Hz, AC supply complete. The unit consisting with any additional refrigerant and oil charge as per requirement during installation.

Supplying, erecting, testing and commissioning of Supplying, erecting, testing and commissioning of VRF/VRV based ceiling suspended 2 way cassette room/indoor unit (IDU-compact / standard size) of nominal cooling capacity 2.8TR (1130 cfm) to 3.7TR ( 1377 cfm ) having EER as per BEE standards and specifications, suitable as per site requirement with swing louvers and adjustable blades from sides. IDU with drainage arrangements, fan, refrigerant liquid and refrigerant piping, cordless remote control, and fresh air port etc. IDU shall have anti corrosive coating suitable for coastal area in all respects suitable to operate on 1-phase, 230V, 50Hz, AC supply complete. The unit consisting with any additional refrigerant and oil charge as per requirement during installation.

Supplying, erecting, testing and commissioning of Supplying, erecting, testing and commissioning of centralised programmable remote control panel (HMI) touch manager controls minimum 16 system of 64 ODU's can be controlled and up to 992 IDU's can be individually mounted and controlled indoor units having colour min 200mm size LCD touch panel, yearly schedule, power proportional distribution function, temperature limitation, history function complete erected on wall integrated with provided fire alarm system.

Supply, fabrication, installation and testing of Supply, fabrication, installation and testing of flexible canvas connections constructed between ductable unit/dampers/ducting of suitable size with fire resist flexible double canvas sleeve complete.

Providing Providing adhesive thermal insulation for supply return air duct with 19mm nitrile rubber insulation having R-value as per the prevailing provisions in ECBC-2017.

Providing & applying Providing & applying of acoustic insulation for air ducts with 25mm thick, 48 kg/cu.m fiber glass faced with RP tissue and covered with 26 SWG perforated aluminium sheets complete.

Supplying and installing Supplying and installing of collar damper of galvanised iron material of upto 120 microns for anti corrosive resistance for supply air grill of suitable size.

Supplying and installing Supplying and installing of high pressure grade required size copper connection Y or T- Joints/refnet complete erected on wall/ceiling with supports/raceways, Nitrile rubber insulation, painting etc. with brazing and testing for leakages confirming the normal operation of the VRV/VRF air conditioning system.

Supplying and erecting Supplying and erecting aluminium powder coated linear grill of suitable size for width length without collar dampers having matching colour with the existing false ceiling and suitable for deflection of 15/30/45°.

Supplying, laying / fixing, testing and commissioning of Supplying, laying / fixing, testing and commissioning of of appropriate nominal refrigerant copper pipe of 28.6mm dia (OD) for liquid line/suction line supply and return piping of suitable gauge (hard copper pipe for liquid main line and soft copper pipe for refrigerant) along with necessary supports, hangers, clamps, vibration isolators and fittings such as bends, tees, valves, gauges, strainers with insulation of 19mm thick elastomeric nitrile rubber along with application of multicoating of VRV/VRF piping for protection against mechanical damages, fungal growth, flame spread, water permeance and ultra violet radiations with OEM standards of VRV/VRF air conditioning system complete.

Supplying, laying / fixing, testing and commissioning of Supplying, laying / fixing, testing and commissioning of of appropriate nominal refrigerant copper pipe of 22.2mm dia (OD) for liquid line/suction line supply and return piping of suitable gauge (hard copper pipe for liquid main line and soft copper pipe for refrigerant) along with necessary supports, hangers, clamps, vibration isolators and fittings such as bends, tees, valves, gauges, strainers with insulation of 19mm thick elastomeric nitrile rubber along with application of multicoating of VRV/VRF piping for protection against mechanical damages, fungal growth, flame spread, water permeance and ultraviolet radiation with OEM standards of VRV/VRF air conditioning system complete.

Supplying, laying / fixing, testing and commissioning of Supplying, laying / fixing, testing and commissioning of of appropriate nominal refrigerant copper pipe of 19.1mm dia (OD) for liquid line/suction line supply and return piping of suitable gauge (hard copper pipe for liquid main line and soft copper pipe for refrigerant) along with necessary supports, hangers, clamps, vibration isolators and fittings such as bends, tees, valves, gauges, strainers with insulation of 19 mm thick elastomeric nitrile rubber along with application of multicoating of VRV/VRF piping for protection against mechanical damages, fungal growth, flame spread, water permeance and ultraviolet radiations with OEM standards of VRV/VRF air conditioning system complete.

Supplying, laying / fixing, testing and commissioning of Supplying, laying / fixing, testing and commissioning of of appropriate nominal refrigerant copper pipe of 15.9 mm dia (OD) for liquid line/suction line supply and return piping of suitable gauge (hard copper pipe for liquid main line and soft copper pipe for refrigerant) along with necessary supports, hangers, clamps, vibration isolators and fittings such as bends, tees, valves, gauges, strainers with insulation of 19mm thick elastomeric nitrile rubber along with application of multicoating of VRV/VRF piping for protection against mechanical damages, fungal growth, flame spread, water permeance and ultraviolet radiations with OEM standards of VRV/VRF air conditioning system complete.

Supplying, laying / fixing, testing and commissioning of Supplying, laying / fixing, testing and commissioning of of appropriate nominal refrigerant copper pipe of 12.7mm dia (OD) for liquid line/suction line supply and return piping of suitable gauge (hard copper pipe for liquid main line and soft copper pipe for refrigerant) along with necessary supports, hangers, clamps, vibration isolators and fittings such as bends, tees, valves, gauges, strainers with insulation of 19mm thick elastomeric nitrile rubber along with application of multicoating of VRV/VRF piping for protection against mechanical damages, fungal growth, flame spread, water permeance and ultraviolet radiations with OEM standards of VRV/VRF air conditioning system complete.

Supplying, laying / fixing, testing and commissioning of Supplying, laying / fixing, testing and commissioning of of appropriate nominal refrigerant copper pipe of 9.5 mm dia (OD) for liquid line/suction line supply and return piping of suitable gauge (hard copper pipe for liquid main line and soft copper pipe for refrigerant) along with necessary supports, hangers, clamps, vibration isolators and fittings such as bends, tees, valves, gauges, strainers with insulation of 19mm thick elastomeric nitrile rubber along with application of multicoating of VRV/VRF piping for protection against mechanical damages, fungal growth, flame spread, water permeance and ultraviolet radiations with OEM standards of VRV/VRF air conditioning system complete.

Supplying and erecting Supplying and erecting iron work, sheet metal work consisting of CRCA sheets, various sections of iron, plates, chequered plates, rods, bars, MS pipes, etc. for panel board or any other purpose with bending, cutting, drilling and welding complete erected at the position with necessary materials duly painted with one coat of red oxide and two coats of enamel paint to match the switchgears or as per directions by the authority.

Supplying and erecting Supplying and erecting GI sheet 0.8 mm (22 SWG) having zinc coating of 275 microns with galvanization process compliance to IS 2629:1985 to be used for fabrication of boxes panel boards etc. including cutting, bending, drilling, welding, riveting etc. and painting with one coat of red lead paint and 2 coats of enamel paint.

Supplying and erecting Supplying and erecting GI sheet 0.6 mm (24 SWG) having zinc coating of 275 microns with galvanization process compliance to IS 2629:1985 to be used for fabrication of boxes panel boards etc. including cutting, bending, drilling, welding, riveting etc. and painting with one coat of red lead paint and 2 coats of enamel paint.

Supplying and erecting Supplying and erecting mains with 2x1.5 sq.mm FRLSH copper PVC insulated wire laid in provided conduit/trunking/inside pole/Bus bars or any other places as per specification No: WG-MA/BW

Supplying and erecting Supplying and erecting tile type modular diffuser made from aluminium sheet with powder coated matching to the ceiling shade for provided supply and return air complete.

Supplying and erecting Supplying and erecting Supply Installation Testing & Commissioning of outdoor type floor mounted Double skin AHU comprising of 48 mm thick panel filled with PUF DIDW backward curved / airfoil fan with 2 ply fire retardant canvas at the outlet complete with suitable motor and mounting arrangements on common rail anti vibration mount thermal break profile Return air mixing chamber with fresh air and return air aluminum dampers DX type Cooling Coil - 2 circuits with capillery header / Electronic Expansion Valve to be connected with VRF/VRV ODU system SS insulated drain pan Inlet Filter EU-5 doors with proximity switch for inspection lamp and AHU stop including volume control damper and motorized fire damper with fire test control panel at AHU outlet installed PLC based Control logic Panel with possibilty of third party BMS connectivity for remote operation etc. The AHU shall have starter panel interconnected with fire panel for fire mode operation Capacity = 10500CFM / 50mmWg / 21.7TR

Supplying and erecting Supplying and erecting Supply Installation Testing & Commissioning of ceiling suspended Double skin AHU comprising of 48 mm thick panel filled with PUF DIDW backward curved / airfoil fan with 2 ply fire retardant canvas at the outlet complete with suitable motor and mounting arrangements on common rail anti vibration mount thermal break profile Return air mixing chamber with fresh air and return air aluminum dampers DX type Cooling Coil - 2 circuits with capillery header / Electronic Expansion Valve to be connected with VRF/VRV ODU system SS insulated drain pan Inlet Filter EU-5 doors with proximity switch for inspection lamp and AHU stop including volume control damper and motorized fire damper with fire test control panel at AHU outlet installed PLC based Control logic Panel with possibilty of third party BMS connectivity for remote operation etc.The AHU shall have starter panel interconnected with fire panel for fire mode operation Capacity = 6500CFM / 50mmWg / 21.6TR

Supplying and erecting Supplying and erecting Supply Installation Testing & Commissioning of ceiling suspended Double skin AHU comprising of 48 mm thick panel filled with PUF DIDW backward curved / airfoil fan with 2 ply fire retardant canvas at the outlet complete with suitable motor and mounting arrangements on common rail anti vibration mount thermal break profile Return air mixing chamber with fresh air and return air aluminum dampers DX type Cooling Coil - 2 circuits with capillery header / Electronic Expansion Valve to be connected with VRF/VRV ODU system SS insulated drain pan Inlet Filter EU-5 doors with proximity switch for inspection lamp and AHU stop including volume control damper and motorized fire damper with fire test control panel at AHU outlet installed PLC based Control logic Panel with possibilty of third party BMS connectivity for remote operation etc.The AHU shall have starter panel interconnected with fire panel for fire mode operation Capacity = 5000CFM / 50mmWg / 10TR

Supplying and erecting Supplying and erecting Supply installation testing and commissioning of Vane Axial Smoke Exhaust Fans with Sound Attenuators complete with drive and Supports system with vibration isolators. Fire rated H Class motor 300 deg.C at 2 Hr. Motor shall be suitable for 415 ± 10% volts 50 cycles 3 phase AC supply and shall have high efficiency motors with all supporting structures and accessories waether proof external exhaust louvers. Sound level shall not be more than 55 dBA from 3 m AMCA Certified only. For auditorium and multipurpose hall Capacity = 8300CFM / 20mmWg

Supplying and erecting Supplying and erecting Supplying erecting testing & commissioning exhaust air system ductable circular inline exhaust air fan inlet unit having 500 cfm capacity with maintaining the static pressure minimum 30mm suitable to operate on 1ph 230 V 50Hz A.C. supply complete.

Supplying and laying Supplying and laying HMS PVC conduit FRLS grade 25 mm dia with necessary accessories in RCC work/false ceiling/false flooring as per specification No. WG-MA/CC

Supplying and erecting Supplying and erecting 25 mm dia. corrugated flexible polypropylene conduit

Supplying and erecting Supplying and erecting PVC box trunking of size 100x50 mm. with accessories on wall/ceiling as per specification No: WG-MA/BOX .

Supplying and erecting Supplying and erecting modular type T.V. socket single outlet, duly erected on provided plate and box with wiring connections complete.

Supplying and erecting Supplying and erecting modular type telephone socket one gang with safety shutter, duly erected on provided plate and box with wiring connections complete.

Supplying and erecting Supplying and erecting modular type blanking plate one module, duly erected on provided plate & box.

Supplying and erecting Supplying and erecting 2 pair telephone copper cable 0.5 mm dia. with high density polyethylene insulation, polyester taped, Nylon Rip Cord & grey colour sheathed with FR PVC, conforming to ITD specification S/WS 113C laid in provided PVC casing capping/conduit as per specification No. WG-TW

Supplying and erecting Supplying and erecting 5 pair telephone copper cable 0.5 mm dia. with high density polyethylene insulation, polyester taped, Nylon Rip Cord & grey colour sheathed with FR PVC, conforming to ITD specification S/WS 113C laid in provided PVC casing capping/conduit as per specification No. WG-TW

Supplying and erecting Supplying and erecting 20 pair, 0.5 mm dia. jelly filled armoured telephone copper cable with poly-al laminate moisture barrier, polythene sheathed, G.S.Tape armoured polythene jacketed having laid in provided trench as per specification No. WG-TW

Supplying and erecting Supplying and erecting 50 pair, 0.5 mm dia. jelly filled armoured telephone copper cable with poly-al laminate moisture barrier, polythene sheathed, G.S.Tape armoured polythene jacketed having laid in provided trench as per specification No. WG-TW

Supplying and erecting Supplying and erecting 100 pair, 0.5 mm dia. jelly filled armoured telephone copper cable with poly-al laminate moisture barrier, polythene sheathed, G.S.Tape armoured polythene jacketed having laid in provided trench as per specification No. WG-TW

Supplying and erecting Supplying and erecting 0.5 mm dia, copper jumper wire as per specification No. WG-TW

Supplying and erecting Supplying and erecting co-axial copper cable low voltage grade tri-shielded RG-6 as per specification No. WG-TW

Supplying and erecting Supplying and erecting 5m HDMI cord low voltage grade minimum 4k compliant to be laid in provided conduits with male/female 19 pin HDMI connectors complete.

Supplying and erecting Supplying and erecting 10m HDMI cord low voltage grade minimum 4k compliant to be laid in provided conduits with male/female 19 pin HDMI connectors complete.

Supplying and erecting Supplying and erecting 15m HDMI cord low voltage grade minimum 4k compliant to be laid in provided conduits with male/female 19 pin HDMI connectors complete.

Supplying and erecting Supplying and erecting 20m HDMI cord low voltage grade minimum 4k compliant to be laid in provided conduits with male/female 19 pin HDMI connectors complete.

Supplying and erecting Supplying and erecting 25m HDMI cord low voltage grade minimum 4k compliant to be laid in provided conduits with male/female 19 pin HDMI connectors complete.

Supplying, Erecting and Commissioning of Supplying, Erecting and Commissioning of MDF Box 50x50 pairs made from min. 1.5mm thick MS sheet as per specification no. WG-TW

Supplying, Erecting and Commissioning of Supplying, Erecting and Commissioning of MDF Box 150x150 pairs made from min. 1.5mm thick MS sheet as per specification no. WG-TW

Supplying, Erecting and Commissioning of Supplying, Erecting and Commissioning of MDF Box 500x500 pairs made from min. 1.5mm thick MS sheet as per specification no. WG-TW

Supplying, Erecting and Commissioning of Supplying, Erecting and Commissioning of 10 pairs FR junction box with moulded plastic enclosure as per specification no. WG-TW

Supplying, Erecting and Commissioning of Supplying, Erecting and Commissioning of 10 pair module for connection & disconnection of telephone cable as per specification no. WG-TW

Supplying, Erecting and Commissioning of Supplying, Erecting and Commissioning of IP EPABX for 10 extensions complete.

Supplying, Erecting and Commissioning of Supplying, Erecting and Commissioning of push button telephone instrument desk top/wall mount with caller ID & Speaker unit as per specification complete.

Supplying, Erecting and Commissioning of Supplying, Erecting and Commissioning of IP telephone instrument as per specification complete.

Supplying and installing Supplying and installing cat-6 cable suitable for networking as per specification no. WG-COC/NC

Supplying and installing Supplying and installing cat-6 armoured cable with ECCS tape suitable for networking as per specification No. WG-COC/NC

Supplying and erecting Supplying and erecting LSZH armoured multimode optical fibre cable with 6 fibres, core dia 50/125 µm (OM3), suitable upto 10 GBPS, ethernet distance at 850 nm of wavelength, on wall/ceiling or laid in provided pipe/trench as per specification no. WG-COC/OFC LSZH

Supplying and erecting Supplying and erecting LSZH armoured multimode optical fibre cable with 12 fibres, core dia 50/125 µm (OM3), suitable up to 10 GBPS ethernet distance at 850 nm of wavelength, on wall/ceiling or laid in provided pipe/trench as per specification No. WG-COC/OFC

Supplying and fixing Supplying and fixing 1 m UTP patch cord of Cat 6 type in position as per specification No. WG-COC/PC

Supplying and fixing Supplying and fixing 2 m UTP patch cord of cat 6 type in position as per specification No. WG-COC/PC

Supplying and pluging Supplying and pluging 3 m fibre patch cord LC-SC MM (50) OM3 LSZH duplex complete as per specification no. WG-COC/FPC

Supplying, fixing, and configuring Supplying, fixing, and configuring 8-ports managed gigabit, Layer-2 switch, 10/100/1000 base-T, POE smart switch plus 2 SFP erected in provided rack complete.

Supplying, fixing, and configuring Supplying, fixing, and configuring 24 ports with 4 (SFP+) port, ethernet managed switch with web view/CLI, 6KV surge protection on ethernet port and console port for management in provided rack as per specification no. WG-NWC/GBS

Supplying, fixing, and configuring Supplying, fixing, and configuring 20 (1G-RJ45) ports + 4 combo 1G ports + 4 10G (SFP+) ports, Layer 3 switch, SI Image, 6KV surge protection on ethernet port and console port for management erected in provided rack complete.

Supplying, fixing, and configuring Supplying, fixing, and configuring 24 ports + (4 SFP+) POE switch, 370W, 6KV surge protection on ethernet port and console port for management on provided rack as per specification No. WG-NWC/ENS

Supplying, fixing, and configuring Supplying, fixing, and configuring 10G Base -SR (SFP+) simplex MM transceiver erected in provided rack complete.

Supplying, fixing, and configuring Supplying, fixing, and configuring modularised multi-service router 802.11/a/n/ac unified Wave 2.5 GHz, with RJ-45 port, supporting 1 to 13 channels for 2.4 GHz, with unified wireless access point complete.

Supplying, installing & testing Supplying, installing & testing UTP connector (RJ-45) as per specification No. WG-NAS/UTPC.

Supplying and fixing Supplying and fixing tool-less IO (Ethernet) flush/surface type in provided modular box as per specification no. WG-NAS/IO

Supplying and fixing Supplying and fixing 24 port patch panel with tool-less keystone jacks in provided U Rack complete as per specification no. WG-NAS/PP

Supplying and fixing Supplying and fixing 12 ports light guide unloaded interconnect unit, rack mounted type, with adapter panel for termination of optical fibre cables in provided U rack complete as per specification no. WG-NAS/LIU

Supplying and fixing Supplying and fixing SC/LC type multimode pigtails (OM3) for LIU to terminate OFC in LIU as per specification No. WG-NAS/LIU2

Supplying and fixing Supplying and fixing Power Distribution Unit for networking rack comprises of 6/16A (6 Nos. sockets), 25 A modular MCB, appropriate rating fuse and indicator lamp, enclosed in black powder coated metal with necessary arrangement for fixing as per specification No. WG-NAS/RAK

Supplying and fixing Supplying and fixing 15U wall mount rack (Dimension-DxWxH – 500x600x767 mm) as per specification No. WG-NAS/RAK

Supplying and fixing Supplying and fixing 22 U floor mount rack (Dimension-DxWxH – 800x600x1176 mm) as per specification No. WG-NAS/RAK

Supplying and fixing Supplying and fixing 42U floor mount server rack (Dimension-DxWxH – 800x600x1866 mm) as per specification No. WG-NAS/RAK

Supplying and fixing Supplying and fixing 9U IP66 outdoor mount server rack with pole mount bracket (Dimension- DxWxH - 500x600x450 mm) as per specification No. WG-NAS/RAK

Supplying and fixing Supplying and fixing dual-band manageable wireless 3x3 Mesh Router, high performance, 802.11 n/ac unified, concurrent access point with POE in networking as per specification no. WG-NAS/LAP2

Supplying, installing & activating Supplying, installing & activating physical license pack software for multiple access point with management, configuration and trouble shooting for all access point in network complete

Supplying and erecting Supplying and erecting Supplying and fixing 2 m Telephone patch cord of RJ11 type

Supplying and erecting Supplying and erecting Supplying and installing testing & commissioning of Digital (Hybrid) type EPABX of 10 Digital + 450 analog extensions built in Compatible Software Server USB Ports internal Storage upto 64GB Group Conference facility. Voice Messages ethernet ports Universal Slots for Interface expansion Cards Single Line Analog Telephones port Trunk line BRI ports GSM/3GPorts SIP Trunks port complete with required accessories. (Make- Matrix / Panasonic / Alcatel or equivalent)

Supplying and erecting Supplying and erecting Supply installation testing & commissioning of Ceiling Mounted Smart LED Projector- Full HD 1920 x 1080 Resolution 3800 ANSI Lumens white/color output Varifocal lens 16 watt audio output 10000:1 contrast ratio Built-in wireless and miracast HDMI 2 inputs VGA 6000 hours unwoven filter 12000 hours lamp life HDCR/Accentualizer RJ-45 port including Remote control power cord cable lens cover & required accessories with Ceiling mounted brackets.

Supplying and erecting Supplying and erecting Supply & fixing of 150" Diagonal Motorized white Screen for projector with motor fixing brackets & required accessories.

Supplying and erecting Supplying and erecting Supply installation testing & commissioning of Smart TV Wall mount 55" Ultra HD Flat LED TV having minimum 2 HDMI 2 USB & 1 RJ 45 port AV port with inbuilt Wi-Fi including wall mount accessories.

Supplying and erecting Supplying and erecting Supplying Erecting Testing & Commissioning 5 MP Full IP Dome/Bullet Camera Complete. Camera Sensor 1/2.7" 5.0 megapixel progressive scan CMOSLens [email protected] Distance 60 Meter DetectShutter Auto/Manual 1 ~ 1/100000s Colour: 0.01Lux (F2.0 AGC ON)Minimum Illumination 0Lux with IR onDigital noise reduction 2D/3D DNRDay/Night IR-cut filter with auto switch (ICR)S/N >52dBIR Range Up to 30m (98ft) IR rangeWavelength 850nmIR On/Off Control Auto/ManualDefog Digital DefogWDR DWDRVideo Video Compression Ultra 265 H.265 H.264 MJPEGH.264 code profile Baseline profile Main ProfileFrame Rate Main Stream: 5MP (2592*1944) Max 20fps; Sub Stream: 720P (1280×720) Max 20fpsVideo Bit Rate 128 Kbps~16 MbpsOSD Up to 4 OSDsPrivacy Mask Up to 4 areasROI Up to 2 areasMotion Detection Up to 4 areasImage White Balance Auto/Outdoor/Fine Tune/Sodium Lamp/Locked/Auto2Digital noise reduction 2D/3D DNRSmart IR SupportFlip Normal/Vertical/Horizontal/180°Dewarping NAHLC SupportedBLC SupportedNetwork Protocols IPv4 IGMP ICMP ARP TCP UDP DHCP RTP RTSP RTCP DNS DDNS NTP FTP UPnP HTTP HTTPS SMTP SSL QoSInterface 10/100M Base-TX EthernetCompatible Integration ONVIF (Profile S Profile T) APICertifications Certifications CE: EN 60950-1/UL: UL60950-1/FCC: FCC Part 15(Include – 12 Month Fully Compressive Warranty

Supplying and erecting Supplying and erecting Supply of 64 Channel professinal series 4K HD Network Video Recorder Smart H265+/H265/Smart H264+ Max 320Mbps Incoming Bandwith upto 12MPResolution for Preview and Playback. Bit Rate 16Kbps-20Mbps per channel. 2HDMI/ 2VGA simultaneous video output to enhance the storagereliablity when the network break down Quad- Core embeded processor. 8 STATA III Ports upto 6 TB for each HDD for 2 RJ45 port (10/100/1000Mbps) independant of joint Networking. Analytical Features like - ANPR People Count Face Detection Missing/ Abonded Objects Tripwire and Instrsion alarms Smart FAN to achive high cooling effects. Automatic Network Replenishment (ANR) Technology - Network Video Recorders with ANR function automatically store video data on an IP camera SD card when the Network is disconnected. After recovery of the network the NVR automatically retrives the video data stored on the camera.

Supplying and erecting Supplying and erecting Supply and Installation of 8 TB (7200 RPM) Surveillance hard disk 8 TB storage capacity with SATA support 6GB/s NCQ 64 MB cache 3.5 inches. (for 30 days recording)

Supplying and erecting Supplying and erecting SITC of 42" Full HD TV VGA DVL 2 x HDMI LAN 2 x USB RGS In out Avin Component in wit ready 20W speakers professional full HD display complete with mounting hardware and software 200 templete included to create your own content manage content with suggested PC or mobile device A professional display backed by three years onsite/offsite warranty and dedicated B2B support (3 years warranty)

Supplying and erecting Supplying and erecting Supply installation testing & Comissioning of Front-of- House left and right clusters with a 14" LF driver or better and multiple MF/HF drivers (More than 4) Biamplified 2 or 3 Way array loudspeaker system; with Individual Module free field Frequency Range (-10dB) of 55Hz - 18kHz or better & Continuous Power Handling of >= 750W LF + 150W MF/HF. The Loudspeaker module shall have a Max. SPL (Peak) of MF/HF>= 130 or better. It should have Horizontal near dispersion pattern of 80º or better vertical dispersion of the array shall be 60 degrees or better. with OEM Couling plate for array modules

Supplying and erecting Supplying and erecting Supply installation testing & Commissioning of a single 18" subwoofer. The louspeaker shall meet the following performance criteria: Frequency Range (-10 dB) of 29Hz - 300Hz. It should have an ground stack position Sensitivity of > = 98dB (1W/1m) or more delivering a ground position Max. Calculated SPL(peak) of >=133 dB; Nominal impedance of 4ohm or higher and continuous Power Handling of 750W or more. The loudspeaker system shall be comprised of a Baltic birch plywood enclosure with standard array rigging hardware for Cardioid as well as stacked position

Supplying and erecting Supplying and erecting Supply installation testing and commissioning of a two-way dual 6.5-inch or better Frequency Range (-10 dB) of 80Hz - 18kHz or better; Nominal Dispersion : 90°H x 60°V or better; Power handling of 800W peak or more; Sensitivity of 90dB or better; Max SPL : 123dB Peak or more with a Nominal impedence of 8 ohms. Standard wall mount brackets shall be included

Supplying and erecting Supplying and erecting Supply installation testing & Comissioning of passive coaxial two-way point source loudspeaker with a single 8" LF driver or better. Frequency Range (-10dB) of 75Hz - 20kHz or better & Continuous Power Handling of >= 150W or better. The Loudspeaker module shall have a Max. SPL (Peak) of MF/HF>= 128 or better. It should have Horizontal near dispersion pattern of 110º or better vertical dispersion of the module shall be 60 degrees or better.

Supplying and erecting Supplying and erecting Supply installation testing and commissioning of 8 channel class D Networkable Power amplifier with a Max Output Power of 8x500W@8 ohms or bridged mode output power of 4x 1000W @ 8/4 ohms. 20Hz - 20 KHz SNR of 102dB and THD + N of <0.4% with built in protection such as Limiters Temperature DC Short Circuit Peak Current Limiters Turn on delay etc. Built in DSP for Matrix routing Speaker equalization Delays Array EQs etc complete with Ethernet Port for Network Control programming and monitoring. Shall offer optional Network audio connectivity (Dante or CobraNet) through expansion slot.

Supplying and erecting Supplying and erecting Supply installation testing and commissioning of Class D configurable amplifier with total 2 x 1000W output power or better across 2 outputs 4/8ohms 70/100 Volt or mixed use operation; Frequency Response : 20Hz - 20kHz for LZ mode ;THD <0.04% at rated output

Supplying and erecting Supplying and erecting Supply installation testing & commissioning of Gooseneck Microphone with connector XLR3M Impedance < 100 Ohm Dimensions L 450 mm (17 72") Frequency response (microphone) 50Hz - 20 kHz Transducer principle (Microphone) pre polarised condenser microphone Pick-up pattern cardioid Equivalent noise level 26 dB (A) Equivalent noise level weighted as per CCIR 468-3 37 dB Maximum sound pressure level (passiv) 130 dB SPL Power supply P48 Current consumption 3 mA ConnectorMic in: XLR-3F Mic out: XLR-3M Logic: clip contact for logic Pin assignment: trigger signal at the logic connector: Logic in (external LED control) GND Logic out (switch signal) Current consumption 3.7 mA with On/Off Switch

Supplying and erecting Supplying and erecting Supply Installation Testing & Commissioning of active antenna splitter 2× 1:4 or 1× 1: Frequency range: 470 – 870 MHz at –3 dB 23 dBm typical Impedance 50 ? Reflection loss 10 dB (all RF outputs) Power consumption : 245 mA Total power consumption Max. 2A (4 receivers & 2 × 2 antenna amplifiers per antenna input) OEM should have authorized service centre in India

Supplying and erecting Supplying and erecting Supply Installation Testing & Commissioning of directional antenna with Impedance:50 Ohm; Connector: BNC; Pick-up pattern: directional;Frequency range: 450 - 960 MHz ;Antenna gain: 4 dBi ;Opening angle: +- 50 degrees ; OEM should have authorized service centre in India

Supplying and erecting Supplying and erecting Supply Installation Testing & Commissioning of cardiod pre-polarised condenser microphone with Frequency response of 20 - 20 000 Hz Sensitivity of 7 mV/Pa;2.3 mV/Pa / 0.7 mV/Pa(with pre-attenuation) Sound pressure level at 1 kHz of 137/147/157 dB SPL(depending on pre-attenuation)Nominal impedance 100 ohm Min. terminating impedance 1 k ohm OEM should have authorized service centre in India

Supplying and erecting Supplying and erecting Supply Installation testing and commissioning of cardioid pre-polarized condenser on-table boundary layer microphone with 3-pin XLR and a programmable microphone button for Toggle on/off PTM PTT and permanent on features with a bi-color LED ring for status indication and TTL logic connector with logic inputs and outputs frequency response of 40 Hz - 20 000 Hz or better and sensitivity of 10 mV/Pa or better nominal impedance at 1 kHz of 200 ? or better current consumption of 5.3 mA or better equivalent noise level of 26 dB(A) or better dynamic range of 111 dB (A) or better maximum SPL of 140 dB or better and operating on 48 V phantom power. The logic output voltage shall be high level > 2.4 or better and low level < 0.4 V or better and logic input voltage shall be high level > 2.0 V and low level < 0.8 V.

Supplying and erecting Supplying and erecting super-cardioid/interference tube mini shotgun microphone capsule for background noise suppression. a permanently polarized condenser microphone capsule with a hyper cardioid / lobar directivity.with the 15 cm short gooseneck stem Impedance 50 ? Frequency response (Microphone) to be 40 Hz to 20 kHz Phantom powering P12 to P48 Equivalent noise level 23 dB(A) Equivalent noise level weighted as per CCIR 34 dB(A) Current consumption 250 ?A

Supplying and erecting Supplying and erecting Supply Installation Testing & Commissioning of dynamic cardioid vocal microphone with ON/OFF switch and with frequency response of 40 Hz – 16 000 Hz and the sensitivity of 2.7 mV/Pa at 1 kHz nominal impedance of 350 Ohm and min. terminating impedance of 1 k Ohm OEM should have authorized service centre in India

Supplying, erecting & terminating Supplying, erecting & terminating Supply Installation Testing & Commissioning of 2 core 2.5 sq mm PVC Speaker Cable high quality twisted pair manufactured with bright annealed PVC Sheathed electrolytic oxygen free grade tinned copper conductors bunched compactly

Supplying, erecting & terminating Supplying, erecting & terminating Supply Installation Testing & Commissioning of 2 core shielded balanced microphone cable.

Supplying, erecting & terminating Supplying, erecting & terminating Supply Installation Testing & Commissioning of 32 core shielded balanced microphone snake cable.

Supplying and erecting Supplying and erecting Supply Installation Testing & Commissioning of Customized XLR Plates

Supplying and erecting Supplying and erecting Supply Installation Testing & Commissioning of Custom made Audio Plates

Supplying and erecting Supplying and erecting Supply Installation Testing & Commissioning of UL Listed Audio Connectors

Supplying and erecting Supplying and erecting Supply Installation Testing & Commissioning of AC Voltage Input Range-180-270 VAC 50/60Hz Maximum AC Current Rating-16 Amps (Thermal breaker) AC Cord: 1.5mm2x3 2.5m Long black IEC C-19 Female to Schuko CEE 7/7 Male Plug AC Receptacles: Convenience Outlet (Front Panel) 1 IEC C-13 (Unswitched) Rear Panel Outlets: 1 IEC C 13 pair (Unswitched) 3 IEC C13 pairs (Sequenced each pair is controlled by separate relay) Surge/Under-Overvoltage Protection: AC Surge Protection: Series Multi-Stage Protection (SMP) Spike Protection Mode: Line to neutral zero ground leakage Response Time: 1 nanosecond Maximum Surge Current: 6 500 Amps Operating Temperature Range: 5C (40F) to 40C (105F) degrees

Supplying and erecting Supplying and erecting Mixer 32 Mixing channels : 32 Line Inputs (24 mono and 4 stereo); 4 GROUP Buses + ST Bus; 6 AUX Sends + 2 FX Sends; FX1:REV-X(8 PROGRAM PARAMETER control)/ FX2:SPX(16 PROGRAM PARAMETER control); 48V phantom power per channel; LINE: 24 mono + 4 stereo CH INSERT: 24 RETURN: 1 stereo; USB Device iPod / iPhone; +0.5/-1.0dB 20Hz - 20kHz Nominal output level @1kHz

Supplying and fixing Supplying and fixing 24 U floor mount rack (Dimension-DxWxH – 800x600x1265 mm) as per specification No. WG-NAS/RAK

Providing and erecting Providing and erecting hot dipped galvanised cover suitable for perforated type Cable tray manufactured from 18 SWG (1.2 mm thick) GI sheet of 150 mm width & 20 mm height complete with necessary hardware.

Supplying and erecting Supplying and erecting mains with 3x2.5 sq.mm FRLSH copper PVC insulated wire laid in provided conduit/trunking/inside pole/Bus bars or any other places as per specification No: WG-MA/BW

Supplying and erecting Supplying and erecting mains with 4x 4 sq.mm FRLSH copper PVC insulated wire laid in provided conduit/trunking/inside pole/Bus bars or any other places. as per specification No: WG-MA/BW

Supplying and erecting Supplying and erecting SITC of 100W High Quality zoomable LED parcan Light complete with COB Lamp source 3200K CCT Colour temperature CRI & TLCI Values above 90 DmX 512 dimming with 2 channel control Beam Angle of 11 to 35 Degree Black powder coated body. As per direction of authority Including Labour cess and Insurance.

Supplying and erecting Supplying and erecting SITC of 200W LED Profile Spot 19 Degree Light complete with 3200K CCT Colour Temperature CRI & TLCI above 90 DmX 512 dimming with 1 or 3 Channel modes Black finish housing IP20 protection having Lux @ 2 Mtrs above 27 000 suitable to illuminate the key presentor or talent on stage.As per direction of authority Including Labour cess and Insurance.

Supplying and erecting Supplying and erecting SITC of 400W LED Blinder Light 30 Degree complete with 3200K CCT Lamp source DmX 512 dimming with 4 or 8 Channel modes Black finish housing IP20 protection having Strobe option and smooth dimming illuminate Stage with uniform light levels. As per direction of authority Including Labour cess and Insurance

Supplying and erecting Supplying and erecting SITC of 54 x 3W LED Par Light 3 in 1 Beam Angle 25° complete with RGBW 3W Lamp source x 54 Pcs DmX 512 dimming with 8 Channel Powder coated Black finish housing IP20 protection having Sound Control & Master Slave Auto Run Mode. Illuminate the Indoor stage with unlimited colour effects. As per direction of authority Including Labour cess and Insurance.

Supplying and erecting Supplying and erecting SITC of 54x3W LED 3200K Par Light Beam Angle 25° complete with 3200K 3W Lamp source x 54 Pcs Having CRI TLCI Values above 95 Flicker Free for high FPS Smooth fade in and Fade out High precision steady color No heat DmX 512 dimming with 2 Channel 0 ~ 100% Powder coated Black finish housing IP20 protection.As per direction of authority Including Labour cess and Insurance.

Supplying and erecting Supplying and erecting SITC of Light fixture mouting clamp customized for suspending on fixed bars on stage made up of Aluminium or MS material complete with black powder coating matt black finish. As per direction of authority Including Labour cess and Insurance.

Supplying and erecting Supplying and erecting SITC of Light Fixture dual safety chain made up of GI wire rope bundled and twisted together having load bearing capacity above 200 Kgs sleve on the rope.As per direction of authority Including Labour cess and Insurance.

Supplying and erecting Supplying and erecting SITC of C Profile MS Hot rolled strips 3mm thick with extra U bend used either to create basic supports for various auditorium stage rigs duly powder coated with matt black texture finish paint. As per direction of authority Including Labour cess and Insurance.

Supplying and erecting Supplying and erecting SITC of Suspender cum clamps designed as per site conidition made out of MS material of size 50x 50x 6mm with black powder coated finish and threaded rod of minimum 12mm suitable to hold Basic grid and light bar.As per direction of authority Including Labour cess and Insurance

Supplying and erecting Supplying and erecting SITC of 15 Mtr FOH Fixed Lighting Bar Straight as per the design made out of 40NB 48 OD Mild steel pipe dual barrel dual construction connected with MS Flat duly powder coated with matt black texture finish.As per direction of authority Including Labour cess and Insurance.

Supplying and erecting Supplying and erecting SITC of Power Controller having rack mount / wall mount separate incomer control for Motor control panel supply RYB Phase indicators internally wired using IS certified wires and cables provided with ivery connectors for the internal terminations and external outgoing connecting points custom built as per specification and project requirement. As per direction of authority Including Labour cess and Insurance. as per OEM

Supplying and erecting Supplying and erecting SITC of High quality power junction box 4 way made up of MS Sheet metal fabricated housing black powder coated fibre glands of suitable size fitted with Powercon or IEC connector Box 10A. As per direction of authority Including Labour cess and Insurance.

Supplying and erecting Supplying and erecting SITC of High quality Dimming In junction box 1 way made up of MS Sheet metal fabricated housing black powder coated fibre glands of suitable size fitted with 5 Pin DmX XLR Female socket.As per direction of authority Including Labour cess and Insurance.

Supplying and erecting Supplying and erecting SITC of High quality Dimming Out junction box 1 way made up of MS Sheet metal fabricated housing black powder coated fibre glands of suitable size fitted with 5 Pin DmX XLR Male socket. As per direction of authority Including Labour cess and Insurance.

Supplying and erecting Supplying and erecting SITC of Internal Earthing System with copper bare conductors all along the cable trays metal parts and Installation Hardwares. As per direction of authority Including Labour cess and Insurance.

Supplying and erecting Supplying and erecting SITC of Black Powder coated cable trays made out of MS Sheet fabricated for a size of 75mm with perforation for heat dessipation provided with lid.As per direction of authority Including Labour cess and Insurance.

Supplying and erecting Supplying and erecting SITC of Motor Control Panel cum remote control 4 Way providing power input for curtain motors internally neatly wired with contactors having individual motor control with required Push button Emergency trip RYB indicators Supply Indictor and necessary meters. Motor control panel duly powder coated with ash grey paint texture finish with all required safety features. As per direction of authority Including Labour cess and Insurance.

Supplying and erecting Supplying and erecting SITC of Cable Connecting Circuit Boxes for the termination of cables from Electrical panel to the grid level point made out of MS Sheet metal fabricated housing duly powder coated with matt black texture finish paint fitted with required channels and ivery connectors necessary glands etc.. As per direction of authority Including Labour cess and Insurance.

Supplying and erecting Supplying and erecting SITC of DmX Male Female Connectors 5 Pin having rubber sheeth protection for Cross connecting DmX wiring connections. As per direction of authority Including Labour cess and Insurance.

Supplying and erecting Supplying and erecting SITC of DmX Male Termination Connector 5 Pin soldered with required capacity of resistor for signal deframing. As per direction of authority Including Labour cess and Insurance.

Supplying and erecting Supplying and erecting SITC of Opto isolated RDM enabled DmX splitter unit complete with Power In and safety fuse 8 Output channels 5 Pin XLR in and out supporting DMX operation as per DmX 512 protocol. As per direction of authority Including Labour cess and Insurance.

Supplying and erecting Supplying and erecting SITC of DmX Controller 24 Faders to control atleast 96 channels with master control fader scene saving option LCD display smooth movement faders easy access key pads DmX 512 protocol optional chase & multifunction keys. As per direction of authority Including Labour cess and Insurance.

Supplying and erecting Supplying and erecting SITC of FRLS Copper unarmoured Flexible cable having 7 Core each of 1.5 Sq mm size.As per direction of authority Including Labour cess and Insurance.

Supplying and erecting Supplying and erecting SITC of 5 Core DmX Cable with Sheathed housing on the cable well designed insulation low noise suitable to transmet DmX signal.As per direction of authority Including Labour cess and Insurance.

Supplying and erecting Supplying and erecting Supply installation and commissioning of Laser Projector 5000 lumens WXGA : size of effective display area- 0.76” (19.3 mm) x 3 BrightEra LCD Panel Aspect ratio: 16:10 Number of pixels- 3 072 000 (1280 x 800 x 3) pixels Zoom – Ratio: Approx. x 1.45 Throw ratio- 1.28:1 to 1.88:1 Lens shift Range Vertical +20% to +55% Lens shift Range Horizontal - +/- 10% Light source Type- Laser diode Filter cleaning / replacement cycle (Max.)- 20 000 H Screen size- Screen size- 40" to 300" (1.02 m to 7.62 m) Light output- 5 000 lm Contrast ratio - 500 000:1 Speaker- 16 W Display resolution- 1920 x 1200 dots Video signal input- NTSC PAL SECAM 480/60p 576/50i 720/60p 720/50p 1080/60i 1080/50i The following items are available for HDMI input only; 1080/60p 1080/50p 1080/24p Keystone correction Horizontal- +/- 30 degrees Vertical- +/- 20 degrees INPUT OUTPUT -RGB / Y PB PR input connector:Mini D-sub 15 pin Audio input connector: Stereo mini jack INPUT B- HDMI input connector: HDMI 19-pin HDCP support Audio input connector: HDMI audio support INPUT C- HDMI input connector: HDMI 19-pin HDCP support Audio input connector: HDMI audio support INPUT D- HDBaseT interface connector: RJ45 4 play (Video Audio LAN Control) VIDEO IN- Video input connector: BNC Audio input connector: Shared with INPUT A OUTPUT- Audio output connector: Stereo mini jack LAN- RJ45 100BASE-TX USB- TYPE-A TYPE-B

Supplying and erecting Supplying and erecting Supplying erecting of Projector Ceiling / Wall mounting kit

Supplying and erecting Supplying and erecting Supply of imported motorised projector screen electrically operated 220 V AC 50Hz single phase. Motor mounted in side roller tube 3-wire instantly reversible type with brake. Equipped with internal thermal overload projection. Preset limit switch setting automatically stops the screen in UP and DOWN position. 3 position control switch or radio-remote control stops or reverses screen direction at any point in the operating cycle. Robust square or hexagonal case in powder coated metal casing. Wall or ceiling mounted. Size 6 x8 Ft./8x10 ft

Supplying, erecting, testing and commissioning of Supplying, erecting, testing and commissioning of DVI to HDMI Convertor high-speed category, supporting full HD 1080p, 2K and 4K video up to 30 ft length, 3D having 24k gold-plated 19-pin Type-A connectors with high-flex CL3-rated jacket, RoHS compliant complete.

Supplying and erecting Supplying and erecting 3m HDMI cord low voltage grade minimum 4k compliant to be laid in provided conduits with male/female 19 pin HDMI connectors complete.

Supplying and erecting Supplying and erecting HDMI Extender Over RJ45 Ethernet Cable Cat 6 60m/200ft complete.

Supplying and erecting Supplying and erecting 15m Audio Video cord low voltage grade as per specification with required 3RCA x 3RCA connector complete.

Supplying and erecting Supplying and erecting modular pop up Box 8 module erected with provided AV/ HDMI , RJ 45,6 A electrical sockets and switch on provided table.

Supplying and erecting Supplying and erecting PVC trunking (PVC casing-n-capping) of size 40 mm with accessories on wall/ceiling as per specification No: WG-MA/CON.

Supplying and erecting Supplying and erecting iron work, sheet metal work consisting of CRCA sheets, various sections of iron, plates, chequered plates, rods, bars, MS pipes, etc. for panel board or any other purpose with bending, cutting, drilling and welding complete erected at the position with necessary materials duly painted with one coat of red oxide and two coats of enamel paint to match the switchgears or as per directions by the authority.

Making cement concrete foundation in 1:3:6 cement concrete, (20 to 25) mm. stone metal duly plastered with necessary curing for complete. (pole muffing or any other purpose). [16-3-7]

Supplying, installing, testing and commissioning of Supplying, installing, testing and commissioning of ETC solar water heating system without heat exchanger type of 500 LPD capacity with SS water tank of 0.5 mm thickness conforming to IS1239 Part-I :2004 complete as per specification no. ESD-SHWS-ETC

Supplying and erecting Supplying and erecting 20/25 mm (ID/OD) Chlorinated polyvinyl chloride pipe (CPVC), thickness 2.6 mm conforming to IS 15778 (CTS Series) with necessary CPVC fittings and solvent cement for Solar Water Heater System as per specification No. ESD-HWP/CPVC

Supplying and erecting Supplying and erecting 32/40 mm (ID/OD) Chlorinated polyvinyl chloride pipe (CPVC), thickness 3.8 mm conforming to IS 15778 (CTS Series) with necessary CPVC fittings and solvent cement for Solar Water Heater System as per specification No. ESD-HWP/CPVC

Supplying and erecting Supplying and erecting elastomeric nitrile rubber / foam tube type sleeves for coating and insulating on provided PC / copper pipes having 9 mm thickness and inner diameter / sizes 22 mm for solar water heater/AC system.

Supplying and erecting Supplying and erecting elastomeric nitrile rubber / foam tube type sleeves for coating and insulating on provided PC / copper pipes having 9 mm thickness and inner diameter / sizes 42 mm for solar water heater/AC system.

Supplying and erecting Supplying and erecting ISI mark GI pipe 40 mm. dia. ‘B’ class at position with accessories complete as per specification no. CW-PLB/GP.

Supplying and erecting Supplying and erecting non return valve 40 mm dia in position made of gun metal complete.

Supplying and erecting Supplying and erecting 40 mm. dia. gun metal sluice valve at position with necessary materials complete.

Supplying, installing, testing and commissioning of Supplying, installing, testing and commissioning of Monoblock Heat pump, having dimension: 995 x 785 x 1700 (mm), Input power: 2.22 kW, 400 V, 3 Ph, 50 Hz, Output power: 8 kW having hot water temperature range 35°C to 75°C and ambient temperature range for max. efficiency 7°C to 43°C, with glass lining hot water tank of 455 ltr. and min. 220 Kg at rated pressure 10 bar with two emergency heating elements operated on three operational mode: Efficiency mode, Hybrid turbo mode and Standard mode with Adaptive Energy System (AES), LED display with necessary accessories complete with 5 years ON-SITE warranty.

Supplying and erecting Supplying and erecting Pressure Booster Pump, single phase, 50C/s, A.C. supply of 0.75 KW/ 1 H.P., With discharge of 480 to 13 LPM for 10 to 50 Mtr Head & 25 mm suction/ 25 mm delivery pipe, for Domestic Pressure boosting applications.

Supplying and erecting Supplying and erecting automatic control panel for 3 Phase , 415 volt, A.C, Submersible/centrifugal pump set up to 7.5 HP consisting of DOL starter having relay range 9-14 AMP,S.P.P., Combined ammeter/ voltmeter, phase indicating lamp enclosed in CRCA powder coated Vibration proof enclosure with IP 54 protection. Control Panel should offer single phasing, phase reversal, phase imbalance etc .

Supplying, installing, testing and commissioning of Supplying, installing, testing and commissioning of storage type Mild Steel mixing water tank of capacity 3000 ltrs. tested to a pressure of 8 kg/cm2, insulated with 50 mm thick rock wool with wire mesh around and cladded with 26 SWG aluminium of dish end type with working pressure of 6 kg/cm2, fabricated with 6 mm thick MS plate and dished ends with 8 mm thick plates complete with man hole cover, inner side of the tank coated with FRP coating of 3 mm thickness withstand temperature of 90°C provided with collars of 2" BSP for provision to install 6 numbers of electrical heating coils if required with thermal sensors for automatic operation and integrated into the electrical circuits of the circulation pumps and the heat pump with safety valve drain, inlet and outlet nozzle, pressure gauge with all necessary accessories complete.

Providing and fixing Providing and fixing high-density polyethylene (HDPE) container one piece moulded triple layer water tank made out of high density polyethylene and built corrugated inclusive of delivery up to destination hoisting and fixing of accessories such as inlet, outlet overflow pipe inclusive of all tanks capacity up to 20000 litres.

Supplying and erecting Supplying and erecting chromium plated heavy duty brass stop cock for inlet pipe of water heater (15mm. dia).

Harsh Constructions Pvt Ltd