Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | 1₹15.1 LAccepted-AOC | 1 | Accepted-AOC Work awarded to the Lowest bidder. | |
| 2 | 2₹15.6 L+₹56,710 (3.76%)Rejected-AOC | 2 | Rejected-AOC Work could not be awarded due to not being lowest bidder. | |
| 3 | 3₹16.3 L+₹1.2 L (7.88%)Rejected-AOC | 3 | Rejected-AOC Work could not be awarded due to not being lowest bidder. | |
| 4 | 4₹16.4 L+₹1.3 L (8.95%)Rejected-AOC | 4 | Rejected-AOC Work could not be awarded due to not being lowest bidder. | |
| 5 | 5₹17.1 L+₹2.0 L (13.5%)Rejected-AOC | 5 | Rejected-AOC Work could not be awarded due to not being lowest bidder. |
Tender Value
₹21.7 L
EMD Value
₹43,337
Closing Date
14 Oct 2019, 11:00 amClosed
Sr. Superintending Engineer(Civil)
ESD(Civil), CDRI, New Campus, Sitapur Road, Lucknow-226031.
Repairing and painting work ofexisting boundary wall at CDRI New Campus, Sitapur Road Lucknow.
2019_CSIR_33405_1
2/Civil/12/2019-Engg.
Open Tender
Construction Works
Works
90 days
CDRI New Campus
Please refer Tender documents.
2 documents required · 2 mandatory
₹590
Director, CDRI
₹43,337
26 Sept 2020
5 Oct 2019
15 Oct 2019
5 Oct 2019
14 Oct 2019
5 Oct 2019
Amount
Carriage of material by mechanical transport including loading, unloading and stacking upto 1 Km. Lime, moorum, building rubbish
Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering ‑ All work upto plinth level. 1:5:10(1 cement:5 coarse sand: 10 graded stone aggregate 40mm nominal size)
Reinforced cement concrete work in walls (any thickness), including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts etc. above plinth level up to floor five level, excluding cost of centering, shuttering, finishing and reinforcement :1:1.5:3 (1 cement : 1.5 coarse sand(zone-III) : 3 graded stone aggregate 20 mm nominal size)
Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level. Thermo-Mechanically Treated bars of grade Fe-500D or more.
Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level in all shapes and sizes in :Cement mortar 1:6 (1 cement : 6 coarse sand)
Structural steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete.
15 mm cement plaster on the rough side of single or half brick wall of mix: 1:6 (1 cement : 6 coarse sand)
Pebble dash plaster upto 10 m height above ground level with a mixture of washed pebble or crushed stone 6 mm to 12.5 mm nominal size, dashed over and including fresh plaster in two layers under layer 12 mm cement plaster 1:4 (1 cement : 4 coarse sand) and top layer 10 mm cement plaster with cement mortar 1:3 (1 cement : 3 fine sand) mixed with 10% finely grounded hydrated lime by volume of cement.
Finishing walls with Acrylic Smooth exterior paint of required shade: New work (Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm) *Note- No extra measurement shall be allowed due to roughness of the surface. Flat area will be measured for payment. Therefore parties may quotes the item rates accordingly. Calculation of quantity of paint will be worked out as per item of BOQ.
Washed stone grit plaster on exterior walls height upto 10 metre above ground level, in two layers, under layer 12 mm cement plaster 1:4 (1 cement : 4 coarse sand ), furrowing the under layer with scratching tool, applying cement slurry on the under layer @ 2 Kg of cement per square metre, top layer 15 mm cement plaster 1:1/ 2:2 (1 cement: 1/2 coarse sand : 2 stone chipping 10 mm nominal size), in panels with groove all around as per approved pattern, including scrubbing and washing the top layer with brushes and water to expose the stone chippings ,complete as per specification and direction of Engineer-in-charge (payment for providing grooves shall be made separately).
Forming groove of uniform size in the top layer of washed stone grit plaster as per approved pattern using wooden battens, nailed to the under layer, including removal of wooden battens, repair to the edges of panels and finishing the groove complete as per specifications and direction of the Engineer-in-charge: 15 mm wide and 15 mm deep groove
Dismantling old plaster or skirting raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 metres lead.
Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge. (Cost of aluminium snap beading shall be paid in basic item): With float glass panes of 5 mm thickness (weight not less than 12.50 kg/ sqm)
Removal of weathering effected dust, soil on existing boundary wall by jet machnie compressor all complete as per drawing and site condition. Only Flat area will be measured for payment. Therefore parties may quotes the item rates accordingly.
AVADH TRADERS
M R Construction
harpal singh
M/s suresh Prasad Tiwari
M/S ADISH ENTERPRISES
stage.html
html • 0.06 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .