Revival and Restoration of Nagdandi Temple at Achabal Anantnag

Ashram at Nagdandi Earth work in excavation by mechanical means (hydraulic excavator) in trenches for foundations, drains, pipes, cables etc. (not exceeding 1.5 m in width) and for shafts, wells, cesspits and the like not exceeding 10 sqm on plan, including dressing of sides and ramming of bottoms lift upto 1.5 m, including getting out excavated earth and disposal of surplus excavated earth as directed, within a lead of 50 metres:All kinds of soil ::

Providing and laying of Stone Soling, hand packed i/c carriage of same from approved source upto site of Work Complete

Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with:1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size) and carriage of all materials 20km

Centering and shuttering including strutting, propping etc. and removal of form for: Suspended floors, roofs, landings,balconies and access platforms.

Brick work with common burnt clay Modular bricks of class designation 7.5. in foundation and plinth including curing complete in :Brick Work in1:6 mix i/c all carraiges leads lifts 10km

Providing and fixing factory made UPVC door frame and shuuters wth UPVC Panels made of UPVC extruded, section having an overall dimension, as below (tolerance+/-1mm with wall thickness 2.0mm +/-0.2mm, corners of the door frame to be joined with galvanized brackets and stainless steel screws, joint mitred and plastic welded. The hinges side vertical of the frames reinforced by galvanized MS tube of size 19x19mm and 1mm +/-0.1mm wall thickness and three numbers stainless steel hinges fixed to the frame complete as per manufacturers’ specifications and direction of engineer-in-charge).

RR Stone Masonary laid Dry with stone of app. Quarry in foundation and plinth with bond stone, i/c all carriages 10 km

12mm thick Cement Plater 1:6 mix on walls

Reinforced cement concrete work in beams, suspended floors, roofs having slope upto 15°, landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases upto five level including curing but excluding the cost of centring, shuttering, finishing and reinforcement with 1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size)

Reinforcement for Rcc work, Including binding , cutting, bending, straightening complete

Providing and applying white cement based putty of specified thickness, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. 2mm Thick i/c colour pigment in cement primer coat complete job

Painting with synthetic enamel paint of approved brand and manufacture to give an even shade. Two or more coats on new work over an under coat of suitable shade with ordinary paint of approved brand and manufacture.

Providind and fixing of 6mm Ply wood over the frame work of existing ceiling i/c frame work wherever neacessary and painting of two coats of synthetic enamel paint over a base primer coat complete job.

Cement concrete flooring 1:2:4 (1cement: 2 coarse sand: 4 graded stone aggregate) finished with a floating coat of neat cement including cement slurry and curing complete, but excluding the cost of nosing of steps etc. complete.(50 mm)

Providing and fixing vertified floor tiles 600x600 mm (thickness to be specified by the manufacturers) of 1st quality conforming to IS: 13755 of NITC.O, ORIENT, SOMANY, KAJARIA or equivalent make in colour such as White, Ivory, Grey, Fume Red, Brown laid on 20 mm thick bed of Cement Mortar 1: 4 ( 1 cement : 4 coarse sand) including pointing the joints with white cement and matching pigment etc., complete.

Providing and laying factory made chamfered edge Cement Concrete paver blocks in footpath, parks, lawns, drive ways or light traffic parking etc, of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colou r& pattern over 50mm thick compacted bed of sand/Stone Dust, compacting and proper embedding/laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand complete all as per direction of Engineer-in-Charge 60mm thick cement concrete paver block of M-35 grade with approved colour, design & pattern

Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade on New work (two or more coats) over and including priming coat with water thinnable cement primer

Providing and fixing of 3mm thick approved brand and colour ACP sheet with required frame work at required postion for soffits eves boarding i/c scafolding and all fixtures upto 30ft frm GL complete with all carriages

P/F of PPR fittings of standard quality, clamps, cutting of chases and making of good the walls including all fittings nipples etc i/c jointing, testing etc complete 25 mm dia

P/F of PPR fittings of standard quality, clamps, cutting of chases and making of good the walls including all fittings nipples etc i/c jointing, testing etc complete 32 mm dia

P/F water Closet with hand lever i/c PVC cistern and bend (530mmx430mm)

Wash basin (630mmx450mm) i/c pedastal & Coupler and waste pipe

P/F Geyser 50L lit of superior Make

P/F of PVC connections of 15mm nominal Bore 600mm long

P/F of PVC Pipes and Fitting of standard make 100mm i/c jointing testing

P/F of PVC Pipes and Fitting of standard make 75 mm i/c jointing testing

Floor trap

100mm dia door bends

100mm plain Bend

75mm dia door bend

75mm Plain Bend

75mm dia Door tee

100x50mm reducer

P/Fixing Cp brass Firttings of approved quality and make Jaquar, Cera, Hindware a) Gratings 100mm

b) Angle valve

c) Long Nose Bib Cock

d) Wall Mixer

e) Basin Mixer

f) Ball Cock

g) Soap Case

h) Towel rail

P/F Ball valve of PPR 25mm dia

P/F of M.S stays/ Clamps of 100/75mm dia

P/F of M.S man-hole cover i/c frames of Septic tank

Construction of Brick Masonary manhole(300x300)mm inner dimension depth upto 600mm in brick work in cement mortar 1:4, foundation conceret in1:4:8, inside plastering 12mm thick in cement concrete 1:3 with floating coat of neat cement i/c PVC/M.S covers complete

P/F of brass value 20mm Dia nominal bore

Gate Valve 24mm dia nominal bore

Water Storage tank Four Layered

Restoration of Gawshala at Nagdandi Achabal Earth work in excavation by mechanical means (Exceeding 30cm and upto 1.5 mtr in depth, 1.5 mtr in width as well as 10 sqm. on plan) including disposal of excavated earth upto 1 mtr from cutting edge, disposed earth to be levelled and neatly dressed -All kindsof soils

P/L of Stone soling tightly hand Picked using Soling Stone including carriage 15km via M.T

Providing and laying in position cement concrete of specified grade excluding the cost of centring and shuttering- All work upto plinth level.1:4:8 (1 cement: 4 coarse sand: 8 graded stone Crushed aggregate 40mm nominal size)

Providing and laying Reinforcement cement concrete excluding the cost of centenng. shuttering, finishing and reinforcement-All work upto plinth level.1:1.5:3 (1 cement: 2 coarse sand: 4 graded stone aggregate 20mm nominal size) Crushed Aggregate in raft ,plinth band,

Reinforced cement concrete work in beams, suspended floors, roofs having slope upto 15°, landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases upto floor five level excluding the cost of centering, shuttering, finishing and reinforcement with 1:1.5:3 ( 1 cement : 1.5 coarse sand : 3 graded stone aggregate 20mm nominal size)

Supplying/Fixing Reinforcment for R.C.C Work including straightening,bending to proper shapes and length as per details,supplying and bending with G20 annealed back wire and placing in position with proper blocks ,supports, chairs,spacers etc - complete upto ist floor level ISI approved Thermo-Mechanically Treated bars of grade Fe-500D or more

Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with 1:3:6 (1 cement : 3 coarse sand : 6 aggregate 20 mm nominal size)

Brick work with fps bricks of class designation 75 in foundation and plinth Excluding extra for brick work in super structure above plinth level in cement mortar 1:6 mix

Extra for brick work above plinth level upto floor V level

Centering and shuttering including strutting, propping etc. and removal of form for: Foundations, footings, bases of columns etc. for mass concrete.

Centering and shuttering including strutting, propping etc. and removal of form for: Suspended floors, roofs, landings, balconies and access platforms.

Centering and shuttering including strutting, propping etc. and removal of form for: Columns, pillars, piers, abutments, posts and struts.

Centering and shuttering including strutting, propping etc. and removal of form for: Columns, pillars, piers, abutments, posts and struts.

Providing wood work in frames of doors, windows, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia and length ( excluding hold fast lugs or with dash fasteners ): imported wood

Providing and fixing glazed shutters for doors, windows and clerestory windows using 4mm thick float glass panes including ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws. 30-35 mm thick Imported Wood

Providing and fixing wire gauge shuttters for doors, windows and clerestory windows using M.S wire gauge width for Aperture 1.4 mm in both directions with wire of dia 0.63 mm including ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws. 30-35 mm Imported Wood

P/F of decorative kit plywood B/S decorative veneer (type i) confirming to IS BWR type

P/F of 40 x 5 mm flat iron hold fast 40cm long including fixing to frames with 10 mm dia bolts nuts & wooden plugs and embedding in cement concrte block 30x 10x5 cm of M10 grade

15mm thick cement plaster on rough side of brick wall in 1:6 mix

6 mm thick cement plaster in ceiling in 1:4 mix

12 mm thick cement plaster on inner side of brick wall in 1:6 mix

Providing and applying cement based wall putty 2mm thick on plastered suraface two or more coats so as to give even surface internal only

Finishing textured exterior walls with water proofing cement paint (two or more coats) incl pigment as per engineer in charge at all locations prepared and applied as per manufacturer’s specifications including appropriate coat, preparation of surface, etc complete on exterior walls of required design and shape

Applying priming coat with ready mixed pink or grey primer of approved brand and manufacture on wood work

Painting with synthetic enamel paint of approved brand and manufacture to give an even shade

P/Fitting ,hoisting and fixing of roof truss MS conforming to relevant IS code as per approved design and drawings including providing MS cleats, base plats, bolts and nuts/ welded and one coat of red oxide zinc crome primer as per design and drawings as directed.

Providing colour coated HI rib GS sheet roofing incl vertical/ curved surface fixed with polymer coated J or L hooks,bolts and nuts 8mm dia with bitumin and G I limpet washers of approved brand and manufacture .50mm thick with zinc coating not less than 275gm/sqm

Providing and fixinging of Steel Grill work in Doors and windows,I/C cutting,hoisting,fixinging in position & applying a coat of approved steel primer with paint comp. ( 10.25.1)

Providing ridges or hips width 60cm overall width coloured GS Sheets fixed with polymer coated J or L hooks, bolts and nuts 8 mm dia G I limpet and bitumin washers complete .50 mm thick with zinc coating not less than 275 gm/sqm

Providing and fixing of Steel work in Soffit and Eave Board including paint and all necessary fitting items/carriages.

Provision For Link locks with L drop,

Provision For Link locks with tower bolts 100 mm,

Provision For Link locks with, handles 6"

Provision For Link locks with , handles 10"

P/L of RR masonary laid dry in sokage pit incl all leads and carriages

Providing and laying vitrified wall tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS:15622 of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1cement :4 coarse sand) including grouting the joints with white cement and matching pigments etc. complete-450x450mm

Carriage of Materials via M.T, Sand average lead 20 km Avg.

Carriage of Materials via M.T, Aggregates average lead 20 km Avg.

Carriage of FPS bricks by M.T 20 km avg lead

Providing and laying of Anti Slip Mats of 10'x6' size

Drainage for Cow Urine i/c trash guard Cover of MS Steel

Collapsable Shutter at the door Entrance

Demolishing of existing demaged Gaushala with stacking of servicible material handing over to Ashram authorities against proper recipt and disposal of unservicible material within 100m lead

Sanitary Part Providing and Fixing of 3 layer PP-R(Poly propylene Random Copolymer ) pipes conforming to IS:15801. UV stabilized and anti-microbial fusion welded,having thermal stability for hot and cold water supply including all PP-R plain and brass threaded PPR fitting, PN-16 pipe ,16mm OD (SDR-7.4)

Providing and Fixing of 3 layer PP-R(Poly propylene Random Copolymer ) pipes conforming to IS:15801. UV stabilized and anti-microbial fusion welded,having thermal stability for hot and cold water supply including all PP-R plain and brass threaded PPR fitting, PN-16 pipe ,20mm OD (SDR-7.4)

Providing and Fixing of 3 layer PP-R(Poly propylene Random Copolymer ) pipes conforming to IS:15801. UV stabilized and anti-microbial fusion welded,having thermal stability for hot and cold water supply including all PP-R plain and brass threaded PPR fitting, PN-16 pipe ,32mm OD (SDR-7.4)

Providing and fixing soil waste PVC pipes 100mm Type B of approved make etc.

Providing and fixing soil waste vent PVC pipes 75mm Type B of approved make

P/F of Door Tee 100mm dia PVC of approved make type B

P/F of Plain Bend 100mm dia PVC of approved make type B

P/F of 100mm dia PVC collar of approved make type B

P/F of 75mm dia PVC collar of approved make type B

P/F of PVC cowel over vent pipe of approved make type B

P/F of 100 x 75mm reducer PVC of approved make type B

P/F of Ms stays and clamps for PVC pipe 75 mm

P/F of CP bib cocks long of approved quality 15mm dia of standard brand

P/F of CPangle valve of approved quality and standard brand

P/F of Gun metal valve of approved quality and standard brand 20 mm nominal board

Providing and fixing Polyethylene water storage tank lSI : 12701 marked indicating the BIS License No. with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank [Sintex, Electroplast, Star, Lotus or equivalent having valid lSI license(1000 litre)

Construction of brick masonary manholes for under ground ci inspection chamber and bend with 75 class designation brick in cement mortar 1:4 with PVC connection RCC top slab(1:2:4) and brick cement concrete/ mud cement concrete (1:4:8) incl. plastering with cement sand mix (1:3) with floating coat of neat and complete job.

P/F of 50 litre geyser of standard make, Racold,hindware,venus etc

P/F of 1hp Water pump of standard make and quality

P/F of Wash basins including pedestals & Pillar Cock

P/F of PVC flexible Connections

Restoration of Meditation Hut at Nagadandi Achabal Earth work in excavation by mechanical means (Exceeding 30cm and upto 1.5 mtr in depth, 1.5 mtr in width as well as 10 sqm. on plan) including disposal of excavated earth upto 1 mtr from cutting edge, disposed earth to be levelled and neatly dressed -All kindsof soils

P/L of Stone soling tightly hand Picked using Soling Stone including carriage 15km via M.T

Providing and laying in position cement concrete of specified grade excluding the cost of centring and shuttering- All work upto plinth level.1:4:8 (1 cement: 4 coarse sand: 8 graded stone Crushed aggregate 40mm nominal size)

Providing and laying Reinforcement cement concrete excluding the cost of centenng. shuttering, finishing and reinforcement-All work upto plinth level.1:1.5:3 (1 cement: 2 coarse sand: 4 graded stone aggregate 20mm nominal size) Crushed Aggregate in raft ,plinth band,

Reinforced cement concrete work in beams, suspended floors, roofs having slope upto 15°, landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases upto floor five level excluding the cost of centering, shuttering, finishing and reinforcement with 1:1.5:3 ( 1 cement : 1.5 coarse sand : 3 graded stone aggregate 20mm nominal size)

Supplying/Fixing Reinforcment for R.C.C Work including straightening,bending to proper shapes and length as per details,supplying and bending with G20 annealed back wire and placing in position with proper blocks ,supports, chairs,spacers etc - complete upto ist floor level ISI approved Thermo-Mechanically Treated bars of grade Fe-500D or more

Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with 1:2:4 (1 cement : 2 coarse sand : 4 aggregate 20 mm nominal size)

Brick work with fps bricks of class designation 75 in foundation and plinth including extra for brick work in super structure above plinth level in cement mortar 1:6 mix

Extra for brick work above plinth level upto floor V level

Centering and shuttering including strutting, propping etc. and removal of form for: Foundations, footings, bases of columns etc. for mass concrete.

Centering and shuttering including strutting, propping etc. and removal of form for: Suspended floors, roofs, landings, balconies and access platforms.

Providing wood work in frames of doors, windows, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia and length ( excluding hold fast lugs or with dash fasteners ): imported wood

Providing and fixing glazed shutters for doors, windows and clerestory windows using 4mm thick float glass panes including ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws. 30-35 mm thick imported Wood

Providing and fixing wire gauge shuttters for doors, windows and clerestory windows using M.S wire gauge width for Aperture 1.4 mm in both directions with wire of dia 0.63 mm including ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws. 30-35 mm Imported Wood

P/F of decorative kit plywood B/S decorative veneer (type i) confirming to IS BWR type

P/F of 40 x 5 mm flat iron hold fast 40cm long including fixing to frames with 10 mm dia bolts nuts & wooden plugs and embedding in cement concrte block 30x 10x5 cm of M10 grade

Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS:15622 of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1cement :4 coarse sand) including grouting the joints with white cement and matching pigments etc. complete-Size of tile 600x600 mm

15mm thick cement plaster on rough side of brick wall in 1:6 mix

6 mm thick cement plaster in ceiling in 1:4 mix

12 mm thick cement plaster on inner side of brick wall in 1:6 mix

Providing and applying cement based wall putty 2mm thick on plastered suraface two or more coats so as to give even surface internal only

Finishing textured exterior walls with water proofing cement paint (two or more coats) incl pigment as per engineer in charge at all locations prepared and applied as per manufacturer’s specifications including appropriate coat, preparation of surface, etc complete on exterior walls of required design and shape

Applying priming coat with ready mixed pink or grey primer of approved brand and manufacture on wood work

Painting with synthetic enamel paint of approved brand and manufacture to give an even shade

P/Fitting ,hoisting and fixing of roof truss MS conforming to relevant IS code as per approved design and drawings including providing MS cleats, base plats, bolts and nuts/ welded and one coat of red oxide zinc crome primer as per design and drawings as directed.

Providing colour coated HI rib GS sheet roofing incl vertical/ curved surface fixed with polymer coated J or L hooks,bolts and nuts 8mm dia with bitumin and G I limpet washers of approved brand and manufacture .50mm thick with zinc coating not less than 275gm/sqm

Providing ridges or hips width 60cm overall width coloured GS Sheets fixed with polymer coated J or L hooks, bolts and nuts 8 mm dia G I limpet and bitumin washers complete .50 mm thick with zinc coating not less than 275 gm/sqm

Providing and fixing of Steel work in Soffit and Eave Board including paint and all necessary fitting items/carriages.

Providing and fixing gang saw cut, mirror polished, premoulded and prepolished, machinecut for kitchen platforms, vanity counters, window sills, facias and similar locations, of required size, approved shade, colour and texture laid over 20 mm thick base cementmortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels- Granite of any colour or shade 16mm thick

Provision For Link locks with L drop, tower bolts 100 mm, handles 150mm etc

Providing and laying vitrified wall tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS:15622 of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1cement :4 coarse sand) including grouting the joints with white cement and matching pigments etc. complete-450x450mm

Carriage of Materials via M.T Sand average lead 20 km Avg.

Carriage of Materials via M.T Aggregates average lead 20 km Avg..

Carriage of FPS bricks by M.T 20 km avg

Carriage of steel reinforcement, cement via M.T 10 kms Avg Lead

Restoration of Daramshalla at Shri Ramakrishna Ashram Vivekananda Kendra (Bhakt Yatri) Civil Part Earth work in excavation by mechanical means over (Exceeding 30cm and upto 1.5 mtr in depth, 1.5 mtr in width as well as 10 sqm. on plan) including disposal of excavated earth upto 1 mtr from cutting edge, disposed earth to be levelled and neatly dressed -All kindsof soils

P/L of Stone soling tightly hand Picked using Soling Stone including carriage 15km via M.T

Providing and laying in position cement concrete of specified grade excluding the cost of centring and shuttering- All work upto plinth level.1:4:8 (1 cement: 4 coarse sand: 8 graded stone Crushed aggregate 40mm nominal size)

Providing and laying Reinforcement cement concrete excluding the cost of centenng. shuttering, finishing and reinforcement-All work upto plinth level.1:1.5:3 (1 cement: 2 coarse sand: 4 graded stone aggregate 20mm nominal size) Crushed Aggregate in raft ,plinth band,

Reinforced cement concrete work in beams, suspended floors, roofs having slope upto 15°, landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases upto floor five level excluding the cost of centering, shuttering, finishing and reinforcement with 1:1.5:3 ( 1 cement : 1.5 coarse sand : 3 graded stone aggregate 20mm nominal size)

Supplying/Fixing Reinforcment for R.C.C Work including straightening,bending to proper shapes and length as per details,supplying and bending with G20 annealed back wire and placing in position with proper blocks ,supports, chairs,spacers etc - complete upto ist floor level ISI approved Thermo-Mechanically Treated bars of grade Fe-500D or more

Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with 1:3:6 (1 cement : 3 coarse sand : 6 aggregate 20 mm nominal size)

Brick work with fps bricks of class designation 75 in foundation and plinth excluding extra for brick work in super structure above plinth level in cement mortar 1:6 mix

Extra for brick work above plinth level upto floor V level

Centering and shuttering including strutting, propping etc. and removal of form for: Foundations, footings, bases of columns etc. for mass concrete.

Centering and shuttering including strutting, propping etc. and removal of form for: Coulmns

Centering and shuttering including strutting, propping etc. and removal of form for: Suspended floors, roofs, landings, balconies and access platforms.

Providing wood work in frames of doors, windows, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia and length ( excluding hold fast lugs or with dash fasteners ): imported wood

Providing and fixing glazed shutters for doors, windows and clerestory windows using 4mm thick float glass panes including ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws. 30-35 mm Imported Kail Wood

Providing and fixing wire gauze shutters using galvanized M.S. wire gauze of average width for aperture 1.4 mm in both directions with wire of dia. 0.63 mm for doors, windows and clerestory windows with ISI marked M.S. pressed butthinges bright finished of required size with necessary screws as per direction ofEngineer-in-charge : 30-35 mm Imported Wood

P/F of decorative kit plywood B/S decorative veneer (type i) confirming to IS BWR type

P/F of 40 x 5 mm flat iron hold fast 40cm long including fixing to frames with 10 mm dia bolts nuts & wooden plugs and embedding in cement concrte block 30x 10x5 cm of M10 grade

Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS:15622 of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1cement :4 coarse sand) including grouting the joints with white cement and matching pigments etc. complete-Size of tile 600x600 mm

15mm thick cement plaster on rough side of brick wall in 1:6 mix

6 mm thick cement plaster in ceiling in 1:4 mix

12 mm thick cement plaster on inner side of brick wall in 1:6 mix

Renewing glass panes, with wooden fillets wherever necessary : 14.7.1 Float glass panes of thickness 4.0 mm (weight not less than 10kg/sqm

Making plinth protection 50mm thick of cement concrete 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) over 75mm bed of dry brick ballast 40mm nominal size well rammed and consolidated and grouted with fine sand including finishing the top smooth and curing complete

Providing and applying cement based wall putty 2mm thick on plastered suraface two or more coats so as to give even surface internal only

Finishing textured exterior walls with water proofing cement paint (two or more coats) incl pigment as per engineer in charge at all locations prepared and applied as per manufacturer’s specifications including appropriate coat, preparation of surface, etc complete on exterior walls of required design and shape

Applying priming coat with ready mixed pink or grey primer of approved brand and manufacture on wood work

Painting with synthetic enamel paint of approved brand and manufacture to give an even shade

P/Fitting ,hoisting and fixing of roof truss MS conforming to relevant IS code as per approved design and drawings including providing MS cleats, base plats, bolts and nuts/ welded and one coat of red oxide zinc crome primer as per design and drawings as directed.

Providing colour coated HI rib GS sheet roofing incl vertical/ curved surface fixed with polymer coated J or L hooks,bolts and nuts 8mm dia with bitumin and G I limpet washers of approved brand and manufacture .50mm thick with zinc coating not less than 275gm/sqm

Providing ridges or hips width 60cm overall width coloured GS Sheets fixed with polymer coated J or L hooks, bolts and nuts 8 mm dia G I limpet and bitumin washers complete .50 mm thick with zinc coating not less than 275 gm/sqm

Providing and fixing of Steel work in Soffit and Eave Board including paint and all necessary fitting items/carriages.

Providing and fixing stainless steel (Grade 304) railing made of Hollow tubes channels, plates etc. including welding ,grinding, buffing, polishing and making curvature (wherever required) and fitting the same withnecessary stainless steel nuts and bolts complete ,including fixing the railing with necessary accessories and stainless steel dash fasteners, stainless steel bolts etc. of required size, on the top of the floor or the side of waist slabwith suitable arrangement as per approval of Engineer-in-charge, (for payment purpose only weight of stainless steel members shall be consideredexcluding fixing accessories such as nuts, bolts, fasteners etc.)

Providing and fixing gang saw cut, mirror polished, premoulded and prepolished, machinecut for kitchen platforms, vanity counters, window sills, facias and similar locations, of required size, approved shade, colour and texture laid over 20 mm thick base cementmortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels- Granite of any colour or shade 16mm thick

P/F of following aluminum fittings ISI marked (anodized anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colors or shades with necessary screws etc. complete:- 8" Aldrop Lock Type

P/F of following aluminum fittings ISI marked (anodized anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colors or shades with necessary screws etc. complete:- 100 mm handle

P/F of following aluminum fittings ISI marked (anodized anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colors or shades with necessary screws etc. complete:- 125 mm handle

P/F of following aluminum fittings ISI marked (anodized anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colors or shades with necessary screws etc. complete:- 100×10 mm T bolt

P/F of following aluminum fittings ISI marked (anodized anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colors or shades with necessary screws etc. complete:- 150×10 mm T bolt

P/F of following aluminum fittings ISI marked (anodized anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colors or shades with necessary screws etc. complete:- Windows fastner stay hooks

P/L of RR masonary laid dry in sokage pit incl all leads and carriages

Providing and laying vitrified wall tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS:15622 of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1cement :4 coarse sand) including grouting the joints with white cement and matching pigments etc. complete-450x450mm

Carriage of Materials via M.T Sand average lead 20 km Avg.

Carriage of Materials via M.T Aggregates average lead 20 km Avg

Carriage of FPS bricks by M.T 20 km avg

Carriage of steel reinforcement, cement via M.T 10 kms Avg Lead

Providing Retro-reflective regulatory sign board of assigned size made out of 2mm thick aluminum sheet, face to be fully covered with highintensity encapsulated lens type retro-reflective sheeting as approved byEngineer-in-charge. Letter, symbols, borders, etc. will be as per IRC:67with required colour scheme on the boards and with the high intensity grade A. the aluminum sheet to be riveted to M.S. frame of angle iron of size 40x40x4mm. The boards will be fixed to 1 No. 50x50mm square postmade of M.S. angle 50x50x4mm, 4m long welded to the frame withadequate anti-theft arrangement. Sheet work to be painted with two or more coats of synthetic enamel paint over an under coat (primer) and back side of aluminum sheet to be painted with two or more coats of epoxy paint including appropriate priming coat complete in all respects as per directions of Engineer-in-charge.

Providing and laying water proofing treatment in sunken portion of WCs, bathroom etc., by applying cement slurry mixed with water proofing cement compound consisting of applying : (a) First layer of slurry of cement @ 0.488 kg/sqm mixed with waterproofing cement compound @ 0.253kg/ sqm. This layer will be allowed to air cure for 4 hours. (b) Second layer of slurry of cement @ 0.242 kg/sqm mixed with water proofing cement compound @ 0.126 kg/sqm . This layer will be allowed to air cure for 4 hours followed with water curing for 48 hours. The rate includes preparation of surface, treatment and sealing of all joints, corners, junctions of pipes and masonry with polymer mixed slurry.

Ornamental Heritage look made of marble or granite 4 Feet High as per Hindu Mythology with special images, Carvings and quotes of Swami Vivekanada Quote, statues, and images to be fixed

Designing, fabricating, testing, installing and fixing in position Curtain Wall with Aluminium Composite Panel Cladding, with open grooves for linear as well as curvilinear portions of the building, for all heights and all levels etc. including: a) Structural analysis & design and preparation of shop drawings for pressure equalization or rain screen principle as required, proper drainage of water to make it watertight including checking of all the structural and functional design. b) Providing, fabricating and supplying and fixing panels of aluminium composite panel cladding in pan shape in metallic colour of approved shades made out of 4mm thick aluminium composite panel material consisting of 3mm thick FR grade mineral core sandwiched between two Aluminium sheets (each 0.5mm thick). The aluminium composite panel cladding sheet shall be coil coated, with Kynar 500 based PVDF / Lumiflon based fluoropolymer resin coating of approved colour and shade on face # 1 and polymer (Service) coating on face # 2 as specified using stainless steel screws, nuts, bolts, washers, cleats, weather silicone sealant, backer rods etc. c) The fastening brackets of Aluminium alloy 6005 T5 / MS with Hot Dip Galvanized with serrations and serrated washers to arrest the wind load movement, fasteners, SS 316 Pins and anchor bolts of approved make in SS 316, Nylon separators to prevent bimetallic contacts all complete required to perform as per specification and drawing The item includes cost of all material &labour component, the cost of all mock ups at site, cost of all samples of the individual components for testing in an approved laboratory, field tests on the assembled working curtain wall with aluminium composite panel cladding, cleaning and protection of the curtain wall with aluminium composite panel cladding till the handing over of the building for occupation. Base frame work for ACP cladding is payable under the relevant aluminium items The Contractor shall provide curtain wall with aluminium composite panel cladding, having all the performance characteristics all complete , as per the Architectural drawings, as per item description, as specified, as per the approved shop drawings and as directed by the Engineer-in Charge. However, for the purpose of payment, only the actual area on the external face of the curtain wall with Aluminum Composite Panel Cladding (including width of groove) shall be measured in sqm. up to two decimal places

Demolishing of existing demaged Structure with stacking of servicible material handing over to Ashram authorities against proper recipt and disposal of unservicible material within 100m lead Carpanter 2nd class

Demolishing of existing demaged Structure with stacking of servicible material handing over to Ashram authorities against proper recipt and disposal of unservicible material within 100m lead Bealdar

Demolishing of existing demaged Structure with stacking of servicible material handing over to Ashram authorities against proper recipt and disposal of unservicible material within 100m lead Hire charges of MINI TRUCK for local shifting.

Sanitary Part Providing and Fixing of 3 layer PP-R(Poly propylene Random Copolymer ) pipes conforming to IS:15801. UV stabilized and anti-microbial fusion welded,having thermal stability for hot and cold water supply including all PP-R plain and brass threaded PPR fitting PN-16 pipe ,20mm OD (SDR-7.4)

Providing and Fixing of 3 layer PP-R(Poly propylene Random Copolymer ) pipes conforming to IS:15801. UV stabilized and anti-microbial fusion welded,having thermal stability for hot and cold water supply including all PP-R plain and brass threaded PPR fitting PN-16 pipe ,32mm OD (SDR-7.4)

Providing and fixing soil waste PVC pipes 100mm Type B of approved make etc.

Providing and fixing soil waste vent PVC pipes 75mm Type B of approved make

P/F of Door Tee 100mm dia PVC of approved make type B

P/F of Plain Bend 100mm dia PVC of approved make type B

P/F of 100mm dia PVC collar of approved make type B

P/F of 75mm dia PVC collar of approved make type B

P/F of PVC cowel over vent pipe of approved make type B

P/F of 100 x 75mm reducer PVC of approved make type B

P/F of Ms stays and clamps for PVC pipe 75 mm

P/F of CP bib cocks of approved quality 15mm dia of standard brand

P/F of CPangle valve of approved quality and standard brand

P/F of Gun metal valve of approved quality and standard brand 20 mm nominal board

Providing and fixing Polyethylene water storage tank lSI : 12701 marked indicating the BIS License No. with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank [Sintex, Electroplast, Star, Lotus or equivalent having valid lSI license(1000 litre)

Construction of brick masonary manholes for under ground ci inspection chamber and bend with 75 class designation brick in cement mortar 1:4 with PVC connection RCC top slab(1:2:4) and brick cement concrete/ mud cement concrete (1:4:8) incl. plastering with cement sand mix (1:3) with floating coat of neat and complete job.

P/F of W C Squatting pan (indian type of size 580 x 440 mm) wc pan with 100mm dia PVC P trap + 10 litre low level PVC flushing cistern including flush pipe manually controlled device with all fitting and fixture complete job

P/F of CP Wall Mixer

P/F of 50 litre geyser of standard make, Racold,hindware,venus etc

P/F of 2hp Water pump of standard make and quality

P/F of stainless steel strainer

P/F of Wash basins including pedestals & Pillar Cock

P/F of stainless steel Head Shower

P/F of Stainless Steel Towel Rods 600mm long and Soap Case

P/F of PVC flexible Connections

P/F of Kitchen Sink 600x450mm along with Sink mixer

Sanitary Complex For Sanatan Samiksha Bhawan Site clearance by the way of engagement of labors including cutting of shrubs etc.

Earth work in excavation by mechanical means (hydraulic excavator) in trenches for foundations, drains, pipes, cables etc. (not exceeding 1.5 m in width) and for shafts, wells, cesspits and the like not exceeding 10 sqm on plan, including dressing of sides and ramming of bottoms lift upto 1.5 m, including getting out excavated earth and disposal of surplus excavated earth as directed, within a lead of 50 metres

Providing and laying of stone soling of tightly hand packed by tamping and backfilling walls including carriage Lead of 15 KM by MT.

Providing and laying cement concrete of specified grade excluding the cost of centering & shuttering using M7.5 mix. (1:4:8) and by using 40 mm down aggregates. Incl carriage 20Km

Providing and laying cement concrete of specified grade excluding the cost of centering & shuttering using M15 mix. (1:2:4) and by using 20 mm down aggregates.

Centering and shuttering including strutting, propping etc. and removal of form for: Foundations, footings, bases of columns etc. for mass concrete.

Centering and shuttering including strutting, propping etc. and removal of form for: Suspended floors, roofs, landings, balconies and access platforms.

Brick work with common burnt clay (non-modular) bricks of class designation 7.5 in foundation and plinth including curing in : Cement mortar 1:6 ( 1 cement : 6 coarse sand) , incl Extra for brick work with common burnt clay bricks/cement concrete bricks in superstructure above plinth level upto floor five level including carriage

Brick work with common burnt clay (non-modular) bricks of class designation 7.5 in foundation and plinth including curing in : Cement mortar 1:6 ( 1 cement : 6 coarse sand)

Reinforced cement concrete work in beams, suspended floors, roofs having slope upto 15°, landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases upto floor five level excluding the cost of centering, shuttering, finishing and reinforcement with 1:1.5:3 ( 1 cement : 1.5 coarse sand : 3 graded stone aggregate 20mm nominal size)

Reinforcement for RCC work including straightening,bending,cutting,placing in position and binding all complete, hot rolled deformed bars.@ 110 kg/cum

P/Laying of RR stone masonary laid dry including carriages lead of 10KM by MT

12 mm thick cement plaster in 1:6 mix of morto

40 mm thick concrete Flooring in 1:2:4 mix of concrete using 12.5 mm size of aggregate.

Providing and fixing water closet squatting pan (European type W.C. pan) with 100 mm sand cast Iron P or S trap, 10 liter low level white P.V.C. flushing cistern, including flush pipe (of approved make) with manually controlled device , with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required, White vitreous china Orissa pattern W.C. pan of size 580x440 mm with integral type foot rests

Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS:15622 of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1cement :4 coarse sand) including grouting the joints with white cement and matching pigments etc. complete, 500x500mm

Providing and laying Vitrified tiles in different sizes (thickness to be specified by manufacturer), with water absorption less than 0.08 % and conforming to I.S. 15622, of approved make, in all colours and shades, in skirting, riser of steps, over 12 mm thick bed of cement mortar 1:3 (1 cement: 3 coarse sand), including grouting the joint with white cement and matching pigments etc. complete. Size of tile 500x500 mm

Providing wood work in frames of doors,windows,clerestory windows and other frames and fixed in position. Imported wood including priming and paint.

Providing and fixing panelled or panelled and glazed shutters for doors, windows and clerestory windows including lSI marked M.S. pressed Butt hinges, Towerbolts, Handles bright finished of required size with necessary screws using Imported wood, Including panelling, 4mm glazing as directed on site incld, two coats of priming and paint.

Providing and fixing wire gauze shutters using galvanized M.S. wire gauze of average width for aperture 1.4 mm in both directions with wire of dia. 0.63 mm for doors, windows and clerestory windows with ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws as per direction of Engineer-in-charge :Imported wood incld priming coat and paint as directed by EIC. 30-35 mm

Carriage of materials by a lead of 15 km Bricks

Carriage of materials by a lead of 15 km Course/Fine Aggregate

Finishing walls with water proofing cement paint of required shade on New work (two or more coats applied @ 3.84 kg/10sqm) i/c Primer coat

Providing and fixing 3 layer PP-R (Poly propylene Random copolymer)pipes conforming to IS: 15801, UV stabilized and anti-microbial fusion welded, having thermal stability for hot and cold water supply including all PP-R plain and brass threaded Polypropylene random fittings. This includes testing of joints complete as per direction of Engineer-incharge, 25mm OD

Providing and fixing 3 layer PP-R (Poly propylene Random copolymer)pipes conforming to IS: 15801, UV stabilized and anti-microbial fusion welded, having thermal stability for hot and cold water supply including all PP-R plain and brass threaded Polypropylene random fittings. This includes testing of joints complete as per direction of Engineer-incharge,32mm OD

Providing and fixing PVC pipes 100mm Type B incl door tees,flow trap ,couplers,bends etc.

Providing and fixing PVC pipes 75mm Type B incl door tees,flow trap ,couplers,bends etc.

Providing and fixing Long nose brass bib cock/angle valve of approved quality with 15 mm nominal bore:CERA/JAGUAR

Providing and fixing angle valve of approved quality with 15 mm nominal bore:CERA/JAGUAR

Providing and fixing Wall Mixer of approved quality with 15 mm nominal bore:CERA/JAGUAR

Providing and fixing Basin Mixer of approved quality with 15 mm nominal bore:CERA/JAGUAR

Provision for water supply fittings , 1000 litre Water Tank including Stop Cock,Ball Valve and other related fittings.

Provision for 25 Litr Water Geyser including PVC Connections and other related fittings.

Provision of Towel Rod, Ring, Soap Case, Tissue Holder, Health Faucet, Grating

Construction of brick masonary manholes for under ground ci inspection chamber and bend with 75 class designation brick in cement mortar 1:4 with PVC connection RCC top slab(1:2:4) and brick cement concrete/ mud cement concrete (1:4:8) incl. plastering with cement sand mix (1:3) with floating coat of neat and complete job.

Providing and fixing wash basin with pedastal C.I. brackets, 32 mm PTMT waste coupling of standard pattern,including painting of fittings and brackets, cutting and making good the walls wherever required. White Vitreous China Flat back wash basin size 550x400 mm

Granite slab flooring over 20mm avg thick base laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing, edge moulding complete with base of cement mortar 1:4 16mm thick,complete gang saw cut mirror, polished, granite

P/Fitting ,hoisting and fixing of roof truss MS conforming to relevant IS code as per approved design and drawings including providing MS cleats, base plats, bolts and nuts/ welded and one coat of red oxide zinc crome primer as per design and drawings as directed.

Providing and fixing of color coated hi rib roofing of approved thickness and make incld all necessary fittings, hips, ridges, soffits, eaves, complete.

Restoration of Bhojnalaya at Nagdandi Achabal Earth work in excavation by mechanical means (Exceeding 30cm and upto 1.5 mtr in depth, 1.5 mtr in width as well as 10 sqm. on plan) including disposal of excavated earth upto 1 mtr from cutting edge, disposed earth to be levelled and neatly dressed -All kindsof soils

P/L of Stone soling tightly hand Picked using Soling Stone including carriage 15km via M.T

Providing and laying in position cement concrete of specified grade excluding the cost of centring and shuttering- All work upto plinth level.1:4:8 (1 cement: 4 coarse sand: 8 graded stone Crushed aggregate 40mm nominal size)

Providing and laying Reinforcement cement concrete excluding the cost of centenng. shuttering, finishing and reinforcement-All work upto plinth level.1:1.5:3 (1 cement: 2 coarse sand: 4 graded stone aggregate 20mm nominal size) Crushed Aggregate in raft ,plinth band,

Reinforced cement concrete work in beams, suspended floors, roofs having slope upto 15°, landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases upto floor five level excluding the cost of centering, shuttering, finishing and reinforcement with 1:1.5:3 ( 1 cement : 1.5 coarse sand : 3 graded stone aggregate 20mm nominal size)

Supplying/Fixing Reinforcment for R.C.C Work including straightening,bending to proper shapes and length as per details,supplying and bending with G20 annealed back wire and placing in position with proper blocks ,supports, chairs,spacers etc - complete upto ist floor level ISI approved Thermo-Mechanically Treated bars of grade Fe-500D or more

Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with 1:3:6 (1 cement : 3 coarse sand : 6 aggregate 20 mm nominal size)

Brick work with fps bricks of class designation 75 in foundation and plinth including extra for brick work in super structure above plinth level in cement mortar 1:6 mix

Extra for brick work above plinth level upto floor V level

Centering and shuttering including strutting, propping etc. and removal of form for: Foundations, footings, bases of columns etc. for mass concrete.

Centering and shuttering including strutting, propping etc. and removal of form for: Suspended floors, roofs, landings, balconies and access platforms.

Centering and shuttering including strutting, propping etc. and removal of form for: Columns, pillars, piers, abutments, posts and struts.

Providing wood work in frames of doors, windows, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia and length ( excluding hold fast lugs or with dash fasteners ): imported kail wood

Providing and fixing glazed shutters for doors, windows and clerestory windows using 4mm thick float glass panes including ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws. 30-35 mm thick Imported Wood

Providing and fixing wire gauge shuttters for doors, windows and clerestory windows using M.S wire gauge width for Aperture 1.4 mm in both directions with wire of dia 0.63 mm including ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws. 30-35 mm Imported Wood

Renewing glass panes, with wooden fillets wherever necessary : 14.7.1 Float glass panes of thickness 4.0 mm (weight not less than 10kg/sqm

P/F of decorative kit plywood B/S decorative veneer (type i) confirming to IS BWR type

P/F of 40 x 5 mm flat iron hold fast 40cm long including fixing to frames with 10 mm dia bolts nuts & wooden plugs and embedding in cement concrte block 30x 10x5 cm of M10 grade

Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS:15622 of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1cement :4 coarse sand) including grouting the joints with white cement and matching pigments etc. complete-Size of tile 600x600 mm

15mm thick cement plaster on rough side of brick wall in 1:6 mix

6 mm thick cement plaster in ceiling in 1:4 mix

12 mm thick cement plaster on inner side of brick wall in 1:6 mix

Making plinth protection 50mm thick of cement concrete 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) over 75mm bed of dry brick ballast 40mm nominal size well rammed and consolidated and grouted with fine sand including finishing the top smooth and curing complete

Providing and applying cement based wall putty 2mm thick on plastered suraface two or more coats so as to give even surface internal only

Finishing textured exterior walls with water proofing cement paint (two or more coats) incl pigment as per engineer in charge at all locations prepared and applied as per manufacturer’s specifications including appropriate coat, preparation of surface, etc complete on exterior walls of required design and shape (outside plaster only)

Add for heritage look in exterior paint by way of skilled labours

Applying priming coat with ready mixed pink or grey primer of approved brand and manufacture on wood work

Painting with synthetic enamel paint of approved brand and manufacture to give an even shade

Wood Panelling in walls using 12mm thickimported wood panelling including the base work 12mm thick 75 mm wide plywood planks and 50mm Cornice at edges complete as per specifications with finishing the surface with sprit polishishing finished work to be measured

P/Fitting ,hoisting and fixing of roof truss MS conforming to relevant IS code as per approved design and drawings including providing MS cleats, base plats, bolts and nuts/ welded and one coat of red oxide zinc crome primer as per design and drawings as directed.

Providing colour coated HI rib GS sheet roofing incl vertical/ curved surface fixed with polymer coated J or L hooks,bolts and nuts 8mm dia with bitumin and G I limpet washers of approved brand and manufacture .50mm thick with zinc coating not less than 275gm/sqm

Providing ridges or hips width 60cm overall width coloured GS Sheets fixed with polymer coated J or L hooks, bolts and nuts 8 mm dia G I limpet and bitumin washers complete .50 mm thick with zinc coating not less than 275 gm/sqm

Providing and fixing of Steel work in Soffit and Eave Board including paint and all necessary fitting items/carriages.

Providing and fixing stainless steel (Grade 304) railing made of Hollow tubes channels, plates etc. including welding ,grinding, buffing, polishing and making curvature (wherever required) and fitting the same withnecessary stainless steel nuts and bolts complete ,including fixing the railing with necessary accessories and stainless steel dash fasteners, stainless steel bolts etc. of required size, on the top of the floor or the side of waist slabwith suitable arrangement as per approval of Engineer-in-charge, (for payment purpose only weight of stainless steel members shall be consideredexcluding fixing accessories such as nuts, bolts, fasteners etc.).

Providing and fixing gang saw cut, mirror polished, premoulded and prepolished, machinecut for kitchen platforms, vanity counters, window sills, facias and similar locations, of required size, approved shade, colour and texture laid over 20 mm thick base cementmortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels- Granite of any colour or shade 16mm thick

P/F of following aluminum fittings ISI marked (anodized anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colors or shades with necessary screws etc. complete:- 8" Aldrop Lock Type

P/F of following aluminum fittings ISI marked (anodized anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colors or shades with necessary screws etc. complete:-100mm handle

P/F of following aluminum fittings ISI marked (anodized anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colors or shades with necessary screws etc. complete:-125 mm handle

P/F of following aluminum fittings ISI marked (anodized anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colors or shades with necessary screws etc. complete:-100x10mm T Bolt

P/F of following aluminum fittings ISI marked (anodized anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colors or shades with necessary screws etc. complete:-150x10mm T Bolt

P/F of following aluminum fittings ISI marked (anodized anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colors or shades with necessary screws etc. complete:-Window Fastner Stay Hooks

P/L of RR masonary laid dry in sokage pit incl all leads and carriages, using quarry stone with bond stone

Providing and laying ceramic wall tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS:15622 of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1cement :4 coarse sand) including grouting the joints with white cement and matching pigments etc. complete-450x450mm

Dismentelling of old Damaged Bojnalaya by Engaging of Carpanter/ Beldar Labours and Lorry i/c disposal of serviceable material & Disposal of same.(0112/0114/0083) Carpanter 2nd class

Dismentelling of old Damaged Bojnalaya by Engaging of Carpanter/ Beldar Labours and Lorry i/c disposal of serviceable material & Disposal of same.(0112/0114/0083) Bealdar

Dismentelling of old Damaged Bojnalaya by Engaging of Carpanter/ Beldar Labours and Lorry i/c disposal of serviceable material & Disposal of same.(0112/0114/0083) Hire charges of MINI TRUCK for local shifting.

Providing Retro-reflective regulatory sign board of size 900mm diameter made out of 2mm thick aluminum sheet, face to be fully covered with high intensity encapsulated lens type retro-reflective sheeting as approved by Engineer-in-charge. Letter, symbols, borders, etc. will be as per IRC:67 with required colour scheme on the boards and with the high intensity grade A. the aluminum sheet to be riveted to M.S. frame of angle iron of size 40x40x4mm. The boards will be fixed to 1 No. 50x50mm square post made of M.S. angle 50x50x4mm, 4m long welded to the frame with adequate anti-theft arrangement. Sheet work to be painted with two or more coats of synthetic enamel paint over an under coat (primer) and back side of aluminum sheet to be painted with two or more coats of epoxy paint including appropriate priming coat complete in all respects as per directions of Engineer-in-charge.

Sanitary Part Providing and Fixing of 3 layer PP-R(Poly propylene Random Copolymer ) pipes conforming to IS:15801. UV stabilized and anti-microbial fusion welded,having thermal stability for hot and cold water supply including all PP-R plain and brass threaded PPR fitting PN-16 pipe ,16mm OD (SDR-7.4)

Providing and Fixing of 3 layer PP-R(Poly propylene Random Copolymer ) pipes conforming to IS:15801. UV stabilized and anti-microbial fusion welded,having thermal stability for hot and cold water supply including all PP-R plain and brass threaded PPR fitting PN-16 pipe ,20mm OD (SDR-7.4)

Providing and Fixing of 3 layer PP-R(Poly propylene Random Copolymer ) pipes conforming to IS:15801. UV stabilized and anti-microbial fusion welded,having thermal stability for hot and cold water supply including all PP-R plain and brass threaded PPR fitting PN-16 pipe ,32mm OD (SDR-7.4)

Providing and fixing soil waste PVC pipes 100mm Type B of approved make etc.

Providing and fixing soil waste vent PVC pipes 75mm Type B of approved make

P/F of Door Tee 100mm dia PVC of approved make type B

P/F of Plain Bend 100mm dia PVC of approved make type B

P/F of 100mm dia PVC collar of approved make type B

P/F of 75mm dia PVC collar of approved make type B

P/F of PVC cowel over vent pipe of approved make type B

P/F of 100 x 75mm reducer PVC of approved make type B

P/F of Ms stays and clamps for PVC pipe 75 mm

P/F of CP bib cocks of approved quality 15mm dia of standard brand

P/F of CP angle valve of approved quality and standard brand

P/F of Gun metal valve of approved quality and standard brand 20 mm nominal board

Providing and fixing Polyethylene water storage tank lSI : 12701 marked indicating the BIS License No. with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank [Sintex, Electroplast, Star, Lotus or equivalent having valid lSI license(1000 litre)

Construction of brick masonary manholes for under ground ci inspection chamber and bend with 75 class designation brick in cement mortar 1:4 with PVC connection RCC top slab(1:2:4) and brick cement concrete/ mud cement concrete (1:4:8) incl. plastering with cement sand mix (1:3) with floating coat of neat and complete job.

P/F of W C Squatting pan (indian type of size 580 x 440 mm) wc pan with 100mm dia PVC P trap + 10 litre low level PVC flushing cistern including flush pipe manually controlled device with all fitting and fixture complete job

P/F of CP Wall Mixer

P/F of 50 litre geyser of standard make, Racold,hindware,venus etc

P/F of 2hp Water pump of standard make and quality

P/F of stainless steel strainer

P/F of Wash basins including pedestals & Pillar Cock

P/F of stainless steel Head Shower

P/F of Stainless Steel Towel Rods 600mm long

P/F of PVC flexible Connections

Restoration of MAA SHARDA BAWAN at Nagdandi Achbal. Providing wood work in frames of false ceiling, partitions etc sawn and fixed in position Budloo / Fir wood

Providing & Fixinging of 6 mm thick Ply wood ceilling i/c all a frame work of 2' x 2' of 40 mm frame work with Budloo wood i/c a coat of wood primer with two coats of Synthic enamel paint of approved Brand or as direct by Engineer in charge.

Providing & fixinging of aluminum composite panels (ACP ) of alstone,Eurobond or equallent in wall clading ceilling (4 mm thick with 0.5 mm thick skin thickness) over & including the frame work of aluminum Sections of 16 gauge of required length with Glass panells of 5 mm thick i/c all necessary fittings like secrews etc comp. or as per the directions of site engineer.

.Removing dry or oil bound distemper, water proofing cement paint and the like by scrapping and sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete

providing & Laying of Mud pluster 40 mm thick i/c preparing the material by mixinging of cutted jute Gunny bags and other bonding material with two or more coats comp. job.

Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade on New work (two or more coats) over and including priming coat with water thinnable cement primer

Finishing walls with acrylic smooth exterior paint orequiredshade on New work (Two or more coats applied @ 1.67 liter/10sqm over and including priming coat of exterior primer applied @ 2.20kg/10sqm)

Painting with aluminum paint of approved brand and manufacture to give an even shade. Two or more coats on new work

Providing and fixinging of Budloo wooden Planks for soffit 30mm thick i/c frme work of same wood 2'x2' of 50mm thick scafolding,priming painting comp.

Restoration of YEGI-SHALA at Nagdandi Dismentelling of old Damaged devri stone massonary i/c Stacking of serviceable material and Disposal of unserviceable for an avg lead of 300 mtr.

Dismentelling of old Damaged flooring i/c disposal of same

Earth work excavation in mechanical means in foundation Trenches i/c dispoal of excavated material lead up to 300 mtr

Providinging and Laying of stone solling hand packed i/c all carraiges leades and lifts compl.

Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with: 1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size) and carriage 20 km

Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) and carriage 20 km

Providing and laying chisel dressed Devri Stone of size 300x200 mm face with 150 mm depth in cement mortar 1: 6 (1 cement : 6 coarse sand) upto plinth level including curing.One face dressed fine chesel dressed. Incld carriage 20km

Supplying and filling of RBM/ Nallah muck under floor i/c ramming Loading,unloading carraige comp.

providing and fixinging of steel Railing for exterior side i/c all carraiges,priming and painting comp

Providing and fixinging of 25x25 mm iron Mesh, i/c priming and painting compl.

Dismentelling of old Damaged truss by engaging skilled black smith i/c stacking of serviceable material and unserviceable material should be handed over to the stake holders against proper Recept.

Structural steel Work welded in built up setions,trusses and framed work, i/c cutting, hoisting,fixinging in positions and applying a priming coat of applying a priming coat of approved steel priming coat of approved steel primer i/c carraige up to the site of work all compleate.

Providing High Rib Colour coated sheet Roofing fixed with Polymer coated J or L hooks bolts and Nuts 0.50mm thickwith zink coated comp. job.

Pro/Laying in position cement conc. Of 1:4:8 mix with 40 mm N/size of agg.i/c curing but exculding cost of form work and Carraige 20km.

50 mm thick cement conc. Flooring in 1:2:4 mix with 20 mm N/Size of agg.i/c curing comp.

Providing and fixinging of Coloured Aluminum panelled ( ACP Sheet 5 mm thick) along with frame & all fixtures comp. job as directed by engineer in charge.

Restoration of Dyaan Sathal & Meditation Park Near Samadhi at Nagdandi Achabal Dismentelling of old Damaged stone massonary Retainging wall i/c Stacking of serviceable material and Disposal of unserviceable for an avg lead of 300 mtr.

Earth work excavation in mechanical means in in foundation Trenches i/c dispoal of excavated material lead up to 300 mtr

Providinging and Laying of stone solling hand packed i/c all carraiges leades and lifts compl.

Pro/Laying in position cement conc. Of 1:4:8 mix with 40 mm N/size of agg.i/c curing but exculding cost of form work and Carraige 20km.

Random Rubble Stone massonary quarry uncoarsed brought to course laid in 1:6 cement sand mortar.

Random Rubble Stone massonary quarry uncoarsed brought to course laid in 1:6 cement sand mortar.

Pro/Laying in position cement conc. Of 1:2:4 mix with 20 mm N/size of agg.i/c curing but exculding cost of form work and Carraige 20km.

Providing and laying chisel dressed Devri Stone of size 300x200 mm face with 150 mm depth in cement mortar 1: 6 (1 cement : 6 coarse sand) upto plinth level including curing. One face dressed fine chesel dressed.

Providing and Filling of Good earth in to Meditation Park i/c levelling,dressing comp.i/c all carraiges Labours complete

Providing and fixing stainless steel (Grade 304) railing made of Hollow tubes channels,plates etc. including welding,grinding, buffing, polishing and making curvature (wherever required)and fitting the same with necessary stainless steel nuts and bolts complete ,including fixing the railing with necessary accessories and stainless steel dash fasteners, stainless steel bolts etc. of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-in-charge, (for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fasteners etc.).

Engagement of Skilled labour for removal of old paint on wood work to make the surface good for new primer and paint

Providing and Applying of of wood primer with two or more coates of synthitic enamel paint on old wood work

Painting steel work with deluxe multi surface paint of required shade to give an even shade. Two or more coats applied @ 0.90litre/10sqm over an under coat of primer applied @ 0.80litre/10sqm of approved brand and manufacture

Providing and applying of Synthitic enamel Paint on Grill work with two or more coats of approved brand.i/c a coat of steel primer.

Engagement of Skilled labour for removal of old paint on Doom surface area / Soffit to make the surface good for new primer and paint

Engagement of Skilled labour( carpentar)for Removal Of Detorated shingling Roof surface i/c stacking of serviceble material and disposal of unserviceble material.

Providing and laying pressed clay tiles (as per approved pattern 20mm nominal thickness and of approved size) on roofs jointed with cement mortar 1:4 (1 cement : 4 coarse sand) mixed with 2% integral water proofing compound laid over a bed of 20mm thick cement mortar 1:4 (1 cement :4 coarse sand) and finished neat complete 12.28

Centering and shuttering including strutting, propping etc. and removal of form for: Foundations, footings, bases of columns etc. for mass concrete.

Cement concrete flooring 1:2:4 (1cement: 2 coarse sand: 4 graded stone aggregate) finished with a floating coat of neat cement including cement slurry and curing complete, but excluding the cost of nosing of steps etc. complete. 50 mm thick with 20mm nominal size stone aggregate.

Carraige of diff materials from diff. sources to site of work Stones from an avg . Lead of 20 kms

Carraige of diff materials from diff. sources to site of work Sand & aggregates from sangam/Mirbazar for an avg lead of 27 Kms

Carraige of Deveri Stones from Ladoo pampore for an Avg. lead of 66 kms.by MT