Construction/Upgradation on the road from Zari Mohalla Kulhama to Main road Ramhama Tehsil Beerwah Budgam

P/L of GSB/Nallah Muck with stone aggregates, dust of specified grade including laying compaction with 80-100KN Road roller and all carriages complete job.

Supplying, stacking , laying , spreading and compacting of Graded crushed stone agg. Of (63mm to 45mm size) WBM G-II in uniform thickness including rolling with PRR 8-10 Tone capacity in stages to proper grade and camber applying and brooming requisite type of stone screening 13-2mm size and binding material to fill up the interstics of coarse agg. watering compacting to required density with all leads, lifts and carriages as involved upto site of work complete job.

Providing, laying, spreading and compacting graded stone aggregate (size range 53 mm to 0.075 mm ) to wet mix macadam (WMM) specification including premixing the material with water at OMC in mechanical mix plant, carriage of mixed material by tipper to site, for all leads & lifts, laying in uniform layers with mechanical paver finisher in sub- base / base course on well prepared surface and compacting with vibratory roller of 8 to 10 tonne capacity to achieve the desired density, complete as per specifications and directions of Engineer-in-Charge

Providing and applying tack coat using hot straight run bitumen of grade –VG-10, including heating the bitumen, spraying the bitumen with mechanically operated spray unit fitted on bitumen boiler, cleaning and preparing the existing road surface as per specifications.

on WBM @ 0.75kgs/sqm

Providing and laying bituminous macadam using crushed stone aggregates of specified grading premixed with bituminous binder, transported to site by tippers, laid over a previously prepared surface with paver finisher equipped with electronic sensor to the required grade, level and alignment and rolling with smooth wheeled, vibratory and tandem rollers as per specifications to achieve the desired compaction and density, complete as per specifications and directions of Engineer-in-Charge..50 mm average compacted thickness with bitumen of grade VG-10 @ 3.5% (percentage by weight of total mix) prepared in Drum Type Hot Mix Plant of 60-90 TPH capacity..incl.all carriages complete

Providing and laying semi- dense Bituminous concrete using crushed stone aggregates of specified grading, premixed with bituminous binder and filler, transporting the hot mix to work site by tippers, laying with paver finisher equipped with electronic sensor to the required grade, level and alignment and rolling with smooth wheeled, vibratory and tandem rollers to achieve the desired compaction and density as per specification, complete and as per directions of Engineer-in-Charge. 25 mm compacted thickness with bitumen of grade VG 10 @ 5% (percentage by weight of total mix) and lime filler @ 2% (percentage by weight of Aggregate)prepared in Drum Type Hot Plant of 60-90 TPH capacity incl.all carriages complete

Providing and laying seal coat of premixed fine aggregate (passing 2.36 mm and retained on 180 micron sieve) with bitumen using 128 kg of bitumen of grade VG-10 bitumen per cum of fine aggregate and 0.60cum of fine aggregate per 100 sqm of road surface including rolling and finishing with road all complete.