Loading…
Loading…
Eligibility, documents, scope, Go/No-Go checksEligibility, required documents, scope of work and Go/No-Go checks for this tender, in one click.
Tender Value
₹11.4 L
EMD Value
₹11,362
Closing Date
26 Oct 2026, 5:00 pm
Eligibility, documents, scope, Go/No-Go checksEligibility, required documents, scope of work and Go/No-Go checks for this tender, in one click.
Superintending Engineer
bhagiratha bhavan warangal
Drilling of Borewell with Pumpset and Construction of pumping main to 40 KL OHSR and laying of pipeline in Srinagar(H) of Mallampally(M)
741302
89/2026-27 of SE
OPEN
Civil Engineering Works
JAYASHANKAR BHUPALPALLY
11 documents required · 11 mandatory
₹403
₹11,362
11 Oct 2026
11 Oct 2026
12 Oct 2026
Drilling of 6 1/2" DTH Bore Well in all strata including fixing casing pipes etc. complete
Cost of 180 mm dia PVC Plain Casing pipe of 6Kg/cm2
Supply and Transportation of star rated Three phase ISI submersible motor pumpset suitable for 6" Bore well. 7.5HP
Supply and Transportation of control panel for three phase submersible motors up to 7.5 HP @ 415V 50Hz operating fitted with supply and fixing of Direct - on - Line LTLK (L&T) /BCH/ SIEMENS / CROMPTON make, 0-500V Volt meter and 0-30A Ammeter, Indication lamps, selector switches, CTS, 32A TP MCB, Single phase preventor,suitable contactor to with stand low voltage pick up and high voltage resistant, with ISI marked capacitors assembled with ISI mark contactors and fitted with Legrand make ISI mark MCB etc., complete.
Manufacture, supply, & delivery of Polyethylene pipes (PE-100 Grade) for water supply conforming to IS 4984- 2016 including transportation to any where in T.G, but excluding GST and specials etc., complete. (Supply upto 90 mm dia in coil & above 90 mm dia stright length in6 M.)ts 50 mm dia 10.00kg/cm2 for suction
Supply of WPSC (Weather Proof Single Core) ISI Alluminium Wire.
Supply of 3 Core 2.5sqmm Flat Copper cable of ISI for Submersible Motors.
Supply, Transportation and fixing of __ 450mm length, 12mm thickness and 75mm wide MS Clamp set with required nuts and bolts.
Supply, installation, testing and commissioning of C.I. non - return valve of following sizes confirming to IS: 5312 complete with rubber gasket, GI bolts, nuts, washers etc as required
Erection and transportation of pumpset
Supply and Delivery of 75mm dia 6kgf/cm2 PVC Pipes including all taxes and transportation to site etc., complete.
Supply and Delivery of 90 mm dia 6kgf/cm2 PVC Pipes including all taxes and transportation to site etc., complete.
E/w excavation in loamy, clayey soils like B.C soils red earth and ordinary gravels for pipe line trenches of size (0.70x1) and depositing on banks with an initial lead of 10m and lift of 2m including lowering,laying,jointing of pvc pipes into the readymade trenches and true to the alignment and gradient,refilling thetrenches with excavated earth etc., complete.
E/w excavation in loamy, clayey soils like B.C soils red earth and ordinary gravels for pipe line trenches of size (0.70x1) and depositing on banks with an initial lead of 10m and lift of 2m including lowering,laying,jointing of pvc pipes into the readymade trenches and true to the alignment and gradient,refilling thetrenches with excavated earth etc., complete.
Supply and delivery and DI D/F Gate valves ( soft Seated ) valves conforming to IS 3896-oart 2-1985 wedge fully rubber lined with EPDM food grade quality and the valve should be of vacuum tight and 100% leak proof with face to face dimensions. All the valves should be with Electrostatic powder caoting both insisde and outside pockets body passages.Drilled as per IS: 1538
Fixing of DI D/F Gate valves ( soft Seated ) by Jointing DI Specials to suit the pressure class of pipe and Jointing materials, and labour charges etc. complete for finished item of work but excluding cost of DI D/F Gate valves(soft Seated) its CED, as specified in Technical specifications.but including seignoarge charges ,cost of specials & Contractors profit but excluding VAT, labour cess , NAC income tax , QC etc
Supply and delivery of 15mm dia House service connection as per standard specification including the cost of the materials like Clamp Saddle/ Electro fusion Saddle confirming to prEN 12201-3, Manufactured from virgin resin of PE-SO/PE-100 with FLOW CONTROL VALVE (5 LPM @5m head), Compression Elbows, MDPE PESO Blue Pipe & Supplying and and including cost of 15mm dia meter brass body CP finish bib tap of BIS standard etc including GI verticals complete for finished item of work
Fixing of Saddles, FCV's, GI Pipe, Bib Taps and MDPE including lowering, laying and jointing including earth workexcavation and refilling the pipe line trench after laying the pipe line
Supply and placing of the Nominal MIX using 20mm size for construction of CC blocks including cost and conveyance of all materials like cement, for M-20 grade
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
RAW_HTML
bid document.docx
TENDER_DOCUMENT • 0.33 MB
BOQItemswb.xls
TENDER_DOCUMENT • 0.52 MB
NIT.docx
TENDER_DOCUMENT • 0.02 MB
1.General Tech.Specf.pdf
TENDER_DOCUMENT • 0.40 MB
2.civil structures.pdf
TENDER_DOCUMENT • 0.06 MB
2.civil structures_1.pdf
TENDER_DOCUMENT • 0.06 MB
1.General Tech.Specf_1.pdf
TENDER_DOCUMENT • 0.40 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .