SPECIAL REPAIR TO BLDG NO P 5 (SINGLE OFFR ACCN) AT 13 THE MALL OF A UNDER AGE BR I AND OTHER SANCTIONED WORK UNDER GE (WEST) FEROZEPUR CANTT

Amount

Dismantling of brick tiles in roof single layer jointed & pointed in cement mortar including removal of grass vegitation including roots near outlet of RWP and OHT staging area complete all as specified.

Demolition of mud phuska in roofs,any thickness,including leeping plaster(whether full thickness removed or only a part thereof) complete all as specified.

Material and Labour for brushing neat cement slurry with 3 kg of cement per square meter.

Material and Labour 10mm thick screed bed or bedding layer of mortar in cm(1:4) with water proofing compound @3% by weight of cement or as per manufacturer instructions will be on surface to have a smooth surface.Note:WPC shall be measured and paid separately.

Supply only water proofing compound complete all as specified.

Material and Labour applying evenly a tack coat of industrial bitumen 85/25 at the rate of 1.2 kg per sqm including cleaning surfaces complete all as specified and directed.

Supply and fixing 50 micron thick Polythene film,laid on roof including preparation of roof surfaces complete all as specified.

Material and Labour for Mud phuska,80mm thick average,consolidated thickness,on flat roofs including 25mm thick mud plaster complete all as specified.

Supply and fixing 40mm thick brick tiles laid on mud mortar and joints grouted flush in cement mortar(1:3) mixed with 5% of crude oil by wt of cement on mud phuska complete all as specified and directed.

All as per item no.9 here-in-before but using old brick tiles retrieved from dismantling (item no.1 here-in-before) including cleaning and removal of mortar from tiles complete all as specified.

Material and Labour Plain cement concrete (1:2:4),type B-1 using 20mm graded stone aggregate min radius of 75mm tk as in roof and parapet wall junction,roof benching,kerbs,mud stop,coping,rounded or chamfered on edges,incl necessary sloping on roof including formwork complete all as specified.

Demolition of reinforced cement cocrete in any position complete complete all as specified.

Use & waste of formwork to sides of concrete foundations,footings,bases or column,raft and raft beams,sides and soffits if any of foundations and plinth beams and similar work,vertical or batter etc rough finished surface of concrete complete all as specified and directed.

Use & waste of formwork to sides of pillars,posts,struts,piers,columns and stanchions ect fair finished surfaces of concrete complete all as specified and directed.

Use & waste of formwork to sides and soffits of floor or roof beams, beams haunchings, girders, bressummers, lintels, cantilever, shelves including supports, overhangs, etc also splays between floors and beams etc rough finished surfaces of concrete all as specified and directed

Use & waste of formwork to soffits of suspended slabs such as roof slabs, floor slabs landings and similar work not exceeding 200mm thick (Horizontal or sloping) complete all as specified.

Use & waste of formwork to edges of concrete flats, treads breaks in floors, window cills, concrete railings, openings in concrete walls, floor and roofs n exc 20 cm wide and sides of RCC/PCC bands in walls, horizontal or sloping and similar work exc 10 cm but n exc 20 cm wide

Material and Labour RCC(1:1.5:3) type B1 20mm graded stone aggregate as in foundations including rafts,footings,foundations beams ,bases of column etc complete all as specified and directed.

Material and Labour RCC(1:1.5:3) type B1 20mm graded stone aggregate as in columns,pillers,piers,posts and structs etc complete all as specified and directed.

Material and Labour RCC(1:1.5:3) type B1 20mm graded stone aggregate as in beams,cantilevers,bressummers,lintels over 1.5 m span complete all as specified and directed.

Material and Labour RCC(1:1.5:3) type B1 20mm graded stone aggregate as in slabs supported on walls,beams and columns in floors,roofs, landings, balconies, canopies, deck slabs and in shelves and the like complete all as specified and directed.

Material and Labour of TMT bars 10 mm dia and over, cut to length bent to shape required including cranking bending spirally for hooping for columns hooking ends and binding with and including mild steel wire (annealed ) not less than 0.9 mm dia all as specified.

All as per item No 22 above but 5 mm dia and over upto and including 10 mm dia in stirrups spaces and binders

Taking down wooden chowkhats or frames with shutters (without taking off shutters from the frames) of size not exceeding 1.50 Sqm each complete all as specified.

Taking down wooden chowkhats or frames with shutters (without taking off shutters from the frames) of size exceeding 1.5 Sqm and not exceeding 4 Sqm each complete all as specified..

Supply and fixing factory made pressed steel frames made of 1.25mm thick MS sheet of profile 105x60mm for door and window frames with one rebate including lock strike plate, shock absorber, 20mm dia 60mm long MS conduit for housing of a drop bolt, treating of internal surfaces of chowkhats with coal tar or black paint including hinges, hold fasts/lugs etc complete all as specified.

Supply and fixing for factory made pressed steel frames made of 1.25mm thick MS sheet of profile 125x60mm for door and window frames with double rebate including lock strike plate, shock absorber, 20mm dia 60mm long MS conduit for housing of a drop bolt, treating of internal surfaces of chowkhats with coal tar or black paint including hinges, hold fasts/lugs etc complete all as specified.

All as per item no 27 here-in-before but size 75x50mm with single rebate.

Supply and fixing factory made 35mm thick second class hard wood, Plain, framed, panelled shutters (any number of panels), with panels of timber flat on both sides (feather edged), or of veneered particle board medium density, wood particle board with commercial face veneers, sizes of members of shutters as specified in SSR part-I section 8 clause 8.24 supplied and fitted to chowkats complete all as specified.

Supply and fixing factory made 35mm thick second class hard wood glazed and skelton shutters,open rebated and prepared to receive glass gauze,etc (without sash bars),edges of framing plain chamfered or rounded fitted with cut and mitred beads for securing glass etc sizes of members of shutters as specified in SSR part-I section 8 clause 8.24(a) fitted to chowkat.

Material and Labour for cement concrete (1:3:6), type C-1 using 20mm graded stone aggregate as in filling of steel chowkhats complete all as specified.

Supply and fixing 250mm long mild steel, sliding door bolt, plate type, stove enameled black, with bright bolt not less than 12mm dia with and including bolts and nuts complete all as specified.

Supply and fixing Mild steel pressed handle, oval type, 150 mm size, stove enameled black and fixed with steel screws, complete all as specified.

Supply and fixing 200mm long MS barrel tower bolts stone enamelled black with bright bolt complete all as specified.

Supply and fixing 150 mm Floor door stopper of aluminium alloy body and tongue, anodized with hard drawn steel spring complete all as specified and as directed.

Supply and fixing 300 mm,ordinary rat tail rod pattern springs including roller and roller plate complete all as specified.

Supply and fixing Factory made box type steel window side hung with pintol hinges & 2 Nos 150mm mild steel tower bolts to each shutter, steel handle and with glazing bars dovetailed or welded and with one shop coat of zinc chromate primer complete all as specified.

Supply and fixing Factory made box type steel window side hung with pintol hinges & 2 Nos 150mm mild steel tower bolts to each shutter, steel handle and without glazing bars dovetailed or welded and with one shop coat of zinc chromate primer complete all as specified.

Supply and fixing Factory made box type steel ventilator side/top hung with glazing bars dovetailed or welded and with one shop coat of zinc chromate primer complete all as specified.

Supply and fixing in repair 3 mm thick ordinary quality sheet glass glazing with oil putty and glazing clips fixed complete to wooden/Steel window not exc 0.5 sqm in each pane including hacking out old broken glass (any thickness, size, quality or description) from metal frame including punching or drilling out old glazing pins/spring clips, complete all as specified.

Supply and fixing 3 mm thick ordinary quality sheet sheet glass glazing with oil putty and glazing clips fixed complete to wooden/Steel window not exc 0.5 sqm in each pane complete all as speciifed.

Supply and fixing 3 mm thick figured glass, pin head type and glazing with oil putty in squares n exc 0.5 sq. m in each pane complete all as speciifed.

Supply and fixing Galvanised mild steel wire cloth 0.56mm nominal dia of wire and average width of aperture not more than 1.18mm and fixed with tinned tacks or galvanized wire staples complete all as specified as in repair.

Supply and fixing in repair Galvanised mild steel wire cloth 0.56mm nominal dia of wire and average width of aperture not more than 1.18mm and fixed with tinned tacks or galvanized wire staples complete all as specified.

Supply and fixing factory made Solid PVC door frame of size 50x47 mm made out of 5 mm plain colour PVC sheet reinforced with MS square tube supplying and fixing as per specification.

Supply and fixing Factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of MS tubes for top & bottom rails. MS frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20mm width stuck inside solvent cement for stiles and plain colour PVC sheets for top rail lock rail & bottom rail either side & as gap insert for top rail and bottom rail. Panelling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the stiles & rails with suitable PVC sheet beading and joined together with solvent cement suppling & fixing in the frame at site as per specification & drawing.

Supply and fixing PTMT tower bolts, 200 mm long and fixed with steel screws complete all as specified.

Supply and fixing PTMT butt hinge, 100mm long, fixed with steel screws with brass/bronze hinge pin complete all as specified.

Supply and fixing PTMT handle 125mm long fixed with steel screws complete all as specified.

Dismantling of boarding, any description, fixed in any position with nails.

Material and Labour for 18/19 mm thick Prelaminated particle board, interior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination, fixed with screws to frame work complete all as specified and directed by Engineer in Charge

Supply and fixing 150mm long aluminium, anodised barrel tower bolts of extruded section, all as specified and as directed by the Engr-in-charge.

Supply and fixing 125mm Extruded aluminium alloy handle all as specified and as directed by the Engr-in-charge.

Supply and fixing Hasp and staple of aluminium anodized, safety type, 100mm long, fixed with screws complete all as specified.

Supply and fixing Aluminium alloy, anodised, sliding door bolt 250mm length,with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed all as specified.

Supply and fixing powder coated anodised aluminium door, window , ventilator frame including shutter etc fixed / sliding or pull and push type in shutter frames or shutters with two/three track sliding aluminium frame of Jindal /Hindalco (or) Equivalent make of approved size with power coating any colour minimum thickness 50 micron including necessary joining cleats, glazing clips, powder coated aluminium snap beading, screws etc including taking down complete all as specified as per manufacturers instructions. Note: Glass Pane and EPDM Rubber beading/gasket will be measured and paid seperatley.

Supply and fixing EPDM Rubber beading around glass in aluminium windows /ventilator shutters.

Supply and fixing 5.5 mm thick sheet glass ordinary quality and glazing with oil putty in square n exc 0.5 Sqm in each pane complete all as specified and as directed.

Supply and fixing 5.5 mm thick sheet glass ordinary quality and glazing with oil putty in square exc 0.5 Sqm in each pane complete all as specified and as directed.

Supply and fixing 200mm long aluminium, anodised barrel tower bolts of extruded section, all as specified and as directed by the Engr-in-charge.

Supply and fixing 125mm Extruded aluminium alloy handle all as specified and as directed by the Engr-in-charge.

Supply and fixing butt hinges 100mm size exturded Alu. alloy with galvanised mild steel hinge pin anodised and fixed type C-21 Specified and directed.

Supply and fixing 4 lever aluminium mortice lock, vertical type size 100 mm complete all as specified.

Supply and fixing hydraulically regulated extruded aluminium body door closer designation No 3 universal type suitable for door shutters of 851 to 1000mm in width and weight between 61 to 80 Kg etc complete all as speciified and directed.

Supply and fixing Mild steel curtain rod powder coated with fixing side brackets, end cups, rings @ 10 Nos per RM and fixed with PVC rawl plugs & steel screws as in repairs complete all as specified.

Demoltion of brick work built in cement mortar of any specification and in any position complete all as specified.

Material and Labour for Brick work in cement mortar 1:6 using sub class ‘B’ old size bricks, straight or curved on plan exceeding 6 metre mean radius complete all as specified.

All as per item 67 above here-in-before but using old bricks retrieved from demolition under item 66 here in before including cleaning and removal of mortar from old bricks.

Material and Labour Brick work in cement mortar 1:4 using sub class ‘B’ old size bricks, straight or curved on plan to any radius in half brick thick walls complete all as specified.

Taking down of cement mortar plaster of any description and preparation of surfaces for receiving new plaster including racking out of joints complete all as specified.

Material and Labour 15mm thick cement plaster in cement mortar 1:4 on brick or concrete surface finished even and fair without using extra cement all as specified

Material and Labour for external rendering 15mm thick in cement mortar (1:4) on any face of brick wall or concrete surfaces, finished fair and even complete all as specified.

Material and Labour for internal rendering 10mm thick in cement mortar (1:6) on any face of brick walls or concrete surfaces, finished even and smooth without using extra cement complete all as specified.

Material and Labour for 5mm thick rendering in cement mortar (1:3) on concrete surfaces, finished even and smooth without using extra cement as in ceiling complete all as specified.

Supply and fixing Expanded metal,cut to length,bent to shape required and tying with and including annealed mild steel wire not less than 0.9mm dia or fixing with galvanised steel staples supplied and fixed complete to wood or steel members complete all as specified and directed. (weight N exc 4 kg/sqm)

Dismantling of floor hearth and wall tiling incl mortar beding and throw rubbish out the premises as directed by the Engr-in-Charge.

Supply and fixing Vitrified ceramic tiles 10mm thick (Square/rectangular)polished area of each tiles not exceeding 0.36 Sqm in floors etc set and jointed in neat cement slurry and pointed in white or coloured (Light Shade)cement to match over 20 mm thick screed bed or bedding layer of cement mortar(1:6) for laying floor finishes.

Material and Labour for light shade Vitrified tile 10mm thick polished, area of tile n exc.0.36 sqm as in Skirting set and jointed in cement slurry over and including 10mm thick rendering in cement mortar (1:4) and pointed in white cement with pigment to match the colour of tiles complete all as specified.

Material and Labour Non - skid Ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match with pigment with colour of tiles over and incl screed bedding 15mm thick in cm(1:6) all as specified

Material and Labour for Non skid ceramic coloured (colour & shade as approved) tiles of 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors set and jointed in neat cement slurry over and including 15mm thick screed in cement mortar (1:6) and pointed in white cement with pigment to match the colour of tiles complete all as specified.

Material and Labour for glazed coloured designer ceramic tiles of size200X300x7mm or 300X450mmX7mm thick on vertical surfaces such as in skirting/dado etc set and jointed in cement slurry over 10mm thick rendering in cement mortar (1:4) and pointed in white cement with pigment to match the colour of tiles complete all as specified and directed by Engr-in-Charge.

Material and Labour for 100 mm thick PCC (1:4:8) type D-2 (using 40 mm graded stone aggregate ) as in sub base for floors etc complete all as specified.

Material and Labour for 75 mm thick PCC(1:4:8) type D-2 using 40mm graded stone aggregate as in sub base of floors finishes complete all as specified and directed.

Material and Labour for 25mm thick fine sand bed under paver block, under floors, foundation or cable protection including spreding leveling in layers complete all as specified and directed by Engr-in-charge.

Material and Labour Machine pressed precast concrete interlocking paver block any shape and size confirming to IS 15658-2006 of 60mm thickness,M-35 Grade complete all as specified and directed.

Material and Labour Chequered cement concrete tiles 20cm x 20cm x 25mm thick, set, jointed and pointed in neat cement slurry in floors as in floor set and jointed in neat cement slurry over and including 20mm thick screed in cement mortar (1:6) and pointed in white cement with pigment to match the colour of tiles complete all as specified.

Dismantling of stone slabs and tiles of any description or thickness in floors aprons laid bedded and pointed in any mortar

Material and Labour Machine cut kota stone slab flooring 20-25mm thick over 20 mm cement screed base CM 1:6 laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing polishing and rounded or chamfered for nosing complete all as per specified.

Material and Labour Kota stone slab 20-25mm thick in riser of steps, skirting, dado and pillar laid over 10mm thick rendering in CM 1:4 and jointed with ditto as per above item no 88.

Material and Labour Granite 18-20mm thick (of any type) work (table rubbed and polished) in steps, jambs, pillars, window-cills, cooking platforms over & including 15mm thick screed in cement mortar (1:4) with pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete all as specified.

Material and Labour for hard core of gauge n.exc 63 mm deposited spread and leveled in layers n.exc 15 cm thick watered and ramed to a true surface complete all as specified and directed.

Demolition of cement concrete in sunken portion of any description and in any position not otherwise specifically provided.

Material and Labour 15mm thick CM(1:3) with WPC on walls as well as on sunken floor portion finished even and smooth without using extra cement. Note:- WPC shall be measured and paid separately.

Applying evenly a tack coat of industrial bitumen 85/25 at the rate of 1.2 kg per sqm including cleaning surfaces.

APP based polymeric membrane minimum weighing 3kg/sqm and minimum 3mm thick reinforced with polyster non wove fabric(wt. not less than 150 gms/sqm)land on primed surface by forced apllication complete all as specified.

Material and Labour PCC (1:5:10) type E2 (using 40mm graded aggregate) in filling under sunken floor portion

Material and Labour 30mm thick PCC(1:2:4) type B-1, using 20mm graded aggregate as in floor finished even and rough to receive top layer complete all as specified

Material and Labour for 50mm thick PCC(1:2:4) type B-1 (using 20mm graded aggregate) as in flooring complete all as specified.

Supply and fixing 15mm bore GI tubes, medium grade with all fitting and fixed complete to walls and ceilings or laid in floors.

All as per item above item N0: 99 herein before but 20 mm bore tubing.

Supply and fixing galvanised steel pipe medium grade 25mm bore as in spout of sunken projecting 15cm beyond the face of wall complete all as specified and directed.

Supply and fixing galvanised steel water tubes 15 mm bore medium grade, with all fittings and fixed complete to walls and ceiling or laid in floors including taking down corroded GI pipe complete all as specified and as directed by Engr-in-Charge.

Supply and fixing galvanised steel water tubes 20 mm bore medium grade, with all fittings and fixed complete to walls and ceiling or laid in floors including taking down corroded GI pipe complete all as specified and as directed by Engr-in-Charge.

Taking up or down 15 mm existing steel tubing and connections and Re fixing old steel tubing and connections in new or old position complete to walls and ceiling or laid in floors complete including cleaning the steel tubing all as specified and as directed.

All as per item No.104 here in before but 20mm dia.

Demolition of unreinforced cement concrete in ground floor and pavings n.exc. 15 cm thick (below or above GL) complete all as specified and directed by Engineer in Charge

Material and Labour Cement concrete (1:3:6) type B-1 using 20mm graded stone aggregate as in plinth protection, 75mm thick, surfaces finished even and smooth without using extra cement complete all as specified.

Supply and fixing in repair 15mm bore pillar tap, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered ‘Hot’ or ‘Cold’ with long screwed shanks and fly-nuts, screwed for iron pipe complete all as specified.

Supply and fixing 15mm bore dia fancy type chromium plated Bib tap with crutch or butter fly handle, screwed down, screwed for iron pipe or for brass ferrule complete all as specified.

Supply and fixing 15mm bore dia CP WHB mixer for mixing hot and cold water screwed down for iron pipe and fixed complete all as specified and directed.

Supply and fixing CP fancy type Wall mixer 2 in-1,connecting legs and wall flange complete all as per manufacturer's instruction and as directed (Make : Parko/Prayag or equivalent) complete all as directed by Engineer-in-Charge

Supply and fixing CP Toilet Paper Holder rod pattern and all as specified and directed (Make Prayag or equivalent)

Supply and fixing Corner glass shelves 300 mm radius, 8mm thick as per sample radius for bath room, fixed on suitable support of brass chromium plated clips complete all as directed

S& F in repair Bib tap of cast copper alloy brass but fency type, Chromium plated 15mm bore, with crutch or butter fly handle, screwed down, screwed for iron pipe or for brass ferrule complete all as specified.

Supply and fixing stainless steel sink with drainage board made of of 1.00mm thick sheet for kitchen with plugs washers38/40mm dia PVC waste pipe and including 38/40mm dia CP waste coupling fixing with cast iron cantilever brackets and connecting union to pipe over all size 915mmX460mm bowl size 410mmX330mmX160mm fixed in repairs complete all as specified and directed.

Supply and fixing 500 litres capacity Water storage tanks rotational moulded, triple layer polythene (cyindrical vertical with closed top) hoisting and fixed in position on roofs complete all as specifed.

Supply and fixing 500 Ltr Rotational moulded triple layer polyethylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Parts & dismantling existing water storage tank, complete all as specified and directed by Engineer in Charge.

Supply and fixing 1000 litres capacity rotational moulded, triple layer polythene water storage tanks (cylindrical vertical with closed top) hoisting and fixed in position on roofs including fittings & dismantling existing water storage tank, complete all as specified and directed by Engineer in Charge.

Supply and fixing 15mm bore dia Gun-metal,globe or gate valve screwed down, high pressure with crutch or butter fly handle, screwed both ends for iron pipe or union fixed in repairs complete all as specified.

Supply and fixing in repair Gun-metal, globe or gate valves 15mm dia bore pipe, with iron wheel head, screwed both ends for iron pipe and fixed.

Supply and fixing 20mm bore dia Gun-metal,globe or gate valve Gate valve screwed down, high pressure with crutch or butter fly handle, screwed both ends for iron pipe or union fixed in repairs complete all as specified.

Supply and fixing in repair Gun-metal, globe or gate valves 20mm dia bore pipe, with iron wheel head, screwed both ends for iron pipe and fixed.

Supply and fixing in repair, 20mm bore Ball valves high pressure of PTMT with epoxy coated Aluminium rod & high density plastic ball screwed for iron pipe (Minimum weight 210 gms) and fixed complete all as specified.

Supply and fixing Ball valve of PVC, 20mm bore, high pressure with polythene float and fly nut complete, screwed for iron pipe or brass ferrule and fixed, complete all as specified.

Supply and fixing Vitreous china white squatting pan orrissa pattern of size 580mm x 440 mm with integral foot rests including necessary lime concrete and 110 mm bore PVC (SWR) 'P’ trap with 550 to 600 mm long neck for connecting WC to branch piece with cement joints, fixed as in repair, complete all as specified.

Supply and fixing in repairs Health Faucet (ABS body) with 8mm dia 1.00m long flexible tube (PVC/Stainless steel coated) and wall hook all as specfied and directed by Engr-in-Charge.

Supply and fixing Urinal flat back vitreous china (White), of size 465 x 365 x 265 mm with grating, union for discharge pipe, spreader & 40mm dia PVC waste pipe upto floor trap complete all as specified.

Supply and fixing Vitreous China bowl urinal flat back, size of 465x355x265 mm white (minimum), with grating and union for discharge pipe (excluding flushing cistern, and flush pipe ) including waste pipe 32mm dia bore fixed in repairs complete all as specified and directed.

Supply and fixing 15mm bore dia chromium plated fancy type Bib tap with crutch or butter fly handle, screwed down, screwed for iron pipe or for brass ferrule complete all as specified.

Supply and fixing in repair 15mm bore stop valve of cast copper alloy,screwed down,high pressure with cruntch or butterfly handle,fancy type,chromium plated,with long shank and cup (concealed type) complete all as specified.

Supply and fixing 15mm bore dia fancy type chromium plated Stop valve screwed down, high pressure with crutch or butter fly handle complete all as specified.

Supply and fixing in repair 15mm bore dia fancy type chromium plated Stop valve screwed down, high pressure with crutch or butter fly handle complete all as specified.

Supply and fixing in repair 15mm stop cock/angle cock cast copper alloy with crutch or butterflty handle, screwed down screwed for iron pipe or for brass ferrule fancy type chromium plated with fancy shank and cup.

Supply and fixing in repair 15mm stop cock cast copper alloy with crutch or butterflty handle, screwed down screwed for iron pipe or brass ferrule fancy type chromium plated with long shank and cup(Concealed type).

Supply and fixing PVC Connection pipe, 450mm long, heavy duty with two sets of brass nuts & washers (one at each end) etc suitable for 15mm bore of pipe as in repair complete all as specified.

Supply and fixing PVC waste pipe of 32mm dia for Wash Hand basin/Urinals etc complete all as specified

Supply and fixing 600mm long towel rail of PTMT fixed to wall with steel screws and PVC rawl plug as in repair complete all as specified.

Supply and fixing CP Soapdish Oval /squaretype as fixed in repairs and all as specified and directed.

Supply and fixing Vitreous china white wash down water closet (pedestal pattern) including PVC seat cover and connection to drain or out going pipe and to flushing pipe anti-syphonage pipe etc, complete all as specified.

Supply and fixing Vitreous china white wash down water closet (pedestal pattern) including PVC seat cover and connection to drain or out going pipe and to flushing pipe anti-syphonage pipe etc, fixed as in repair, complete all as specified.

Supply and fixing 10 litres capacity PVC low level flushing cistern (white) with inlet ball float valve, PVC flush pipe and necessary fixing arrangements and connecting to water pipe and WC etc complete all as specified.

Supply and fixing PVC low level flushing cistern (white) of 10 liters capacity with inlet ball float valve, PVC flush pipe and necessary fixing arrangements and connecting to water pipe and WC etc and fixed in repairs complete all as specified.

Supply and fixing Wash hand basin, flat back 550x400mm vitreous china (white) including PTMT waste fittings, 32mm bore size, waste pipe, PVC, 32mm bore, angle iron/cast iron brackets of required size as directed & making good disturbed surfaces to match with the existing as in repair complete all as specified and directed.

Supply and fixing Wash hand basin, flat back 550x400mm vitreous china (white) including PTMT waste fittings, 32mm bore size, waste pipe, PVC, 32mm bore, angle iron/cast iron brackets of required size as directed & making good disturbed surfaces to match with the existing as in repair complete all as specified and directed.

Supply and fixing chromium plated shower rose 125mm size with or without swivel joint for fixing in 15mm dia pipe.

Supply and fixing in repair chromium plated shower rose 125mm size with or without swivel joint for fixing in 15mm dia pipe.

Supply and fixing Towel rail 600mm long of brass chromium plated fixed with & including CP brass screws & wooden/Plastic cleats (min. weight 170 gms)

Dismantling CI pipe alongwith fittings of 50/75/100mm dia,below or above ground level or laid in floors,jointed in cement mortar and taking out complete all as specified.

Supply and fixing 110mm bore PVC (SWR) pipe of pressure not less than 4 Kg/Sqcm in single socketed, in any length with rubber ring joints, fixed to wall including distance pieces and stack clamp with nuts & bolts complete all as specified and directed.

Supply and fixing 110mm bore PVC (SWR) pipe of pressure not less than 4 Kg/Sqcm in single socketed, in any length with rubber ring joints, laid in trenches or in floors complete all as specified and directed.

Supply and fixing 75mm bore PVC (SWR) floor trap, plain with grating including jointing with solvent cement as in repairs complete all as specified.

Supply and fixing 110mm bore, PVC (SWR) bends any radius complete all as specified.

Supply and fixing 110mm bore, PVC (SWR) branch piece, single (single T) equal or unequal with access door complete all as specified.

Supply and fixing PVC(SWR) vent cowl,for 110mm bore pipe complete all as specified and directed.

Supply and fixing 75mm bore PVC (SWR) pipes (pressure rating not less than 4 Kg/cm2) single socketed, in any length with rubber ring joints, fixed to wall complete all as specified and directed.

Supply and fixing 75mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors complete all as specified and directed.

Supply and fixing 75mm bore, PVC (SWR) bends any radius complete all as specified.

Supply and fixing 1 mm thick wall care putty on exterior wall complete all as specified and directed.

Material and Labour Preparing new surfaces of wood and wood based surfaces of any description,not other wise described, over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified.

Material and Labour Preparing new surfaces of steel of any description,not other wise described, over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified.

Material and Labour for Preparation of new plastered surfaces wall and applying two coats of Oil bound distember over a coat of primer after finishing wall surface with 1mm thick wall care putty complete all as specified.

Material and Labour for Preparation of new plastered surfaces and applying two coats of cement base paint over a coat of primer complete all as specified.

Material and Labour for Preparation of newly plastered surfaces of walls & applying three coats of white wash complete all as specified.

Material and Labour for Preparation of newly plastered surfaces of ceiling & applying three coats of white wash complete all as specified.

Material and Labour for complete removal of existing treatment of walls and applying two coats of oil bound distemper, over a coat of primer after finishing wall surface with 1mm thick wall care putty, complete all as specified and as directed.

Material and Labour for preparing of old decorated surfaces (plastered or un-plastered) by brooming down and applying one coat of oil bound distemper including cornices complete all as specified and directed.

Material and Labour for preparing of old decorated surfaces (plastered or un-plastered) by brooming down and applying one coat of cement based paint including cornices complete all as specified and directed.

Material and Labour for complete removal of existing treatment and applying two coats of 100% Premium acrylic emulsion paint having VOC less than 50gm/litre and UV resistance as per IS 15489:2004,Alkali & fungal resistance,dirt resistance exterior paint of required shade(Company Depot Tinted) with silicon additives @ 1.43 litre/10 sq m over and including priming coat of exterior primer @ 0.90 litre/10sqm over new surfaces.

Material and Labour for preparation of old decorated surfaces (plastered or un-plastered) by brooming down and applying one coat of white wash on walls including cornices complete all as specified and directed.

Material and Labour for preparation of old decorated surfaces (plastered or un-plastered) by brooming down and applying one coat of white wash to ceiling including cornices all as specified and directed.

Material and Labour for preparation of old painted wooden surfaces over 10cm width or girth and applying one coat of synthetic enamel paint all as specified.

Material and Labour for Preparing old painted steel surfaces over 10cm width or girth and applying one coat of synthetic enamel paint all as specified.

Material and Labour for applying two coat of synthetic enamel paint(ordinary tint) over one coat of primer on new plastered surfaces including preparation of surfaces.

Material and Labour for writing letters or figures(Block Roman Italic and Indian) 15cm high on wall surfaces,so that the stand out boldly and solidly without showing signs of brush marks all as specified.(Note:-The letters to be write with in the black synthetic enamel painted back ground,it is measured and paid seperately)

Surface excavation in soft /loose soil not exceeding 30 cm deep and averaging 15 cm deep and getting out complete all as specified.

Excavating in trenches n.exc 1.5 m wide and n.exc 1.5 m depth for foundation etc or for shafts wells cespits, manholes, pier holes etc or for cable protection n.exc 10 sq m on plan and n exc 1.5 m in depth and getting out in soft/loose soil complete all as specified and directed

Returning filling in layers including leveling watering and well ramming in layers n.exc 25 cm thick compelte all as specified and directed.

Removing surplus spoil to a distance not exceeding 50 m and depositing where directed at a level not exc 1.5 m above the starting point.

Material and Labour for PCC (1:4:8) type D-2 (using 40 mm graded stone aggregate ) as in foundation filling, sub base for floors etc complete all as specified.

Material and Labour cement concrete 1:3:6 type C2 with using 40 mm graded stone aggregate as in concrete bed to drain pipe 150 mm dia including packing under and haunching against the sides of pipe after they are laid and tested completed all as specified and directed

Supply and fixing salt glazed stonewire drain pipe 150 mm internal diameter grade A laid in trenches jointed and tested complete all as specified and directed.

Cutting into existing manholes for connecting new drains 150mm dia,making good to pipe & rendering,cutting out existing benching for & forming branch channel (1/2 round or 3/4 section) in cement concrete 1:2:4 type B-1 smooth finished & reforming benching as required complete all as specified and directed.

Taking down copper/aluminium point wiring (light, fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fitting etc. removing materials to store for keeping in safe custody or for taking credit (credit for above items should be made as per conditions separately) and making good disturbed surfaces of walls, floors, etc.etc complete all as directed by Engr-in-Charge.

Taking down carefully unserviceable main switches and distribution boards with fuses/ MCB's (single phase or three phase) of any capacity all as specified and directed.

Taking down carefully old unserviceable sub main wiring including meters and making good disturbed surfaces and matching with existing complete all as directed and specified

M &L Point wiring complete with 1100 volts grade PVC insulated unsheathed FRLS cable of copper conductor, multi stranded of size 1.5 sqmm, single core, in and including new rigid non-metallic PVC conealed conduit, with all accessories as required such as bends,reducers, spacers, saddles, junction boxes bakelite sheets, wooden rectangular boards / round blocks(for housing lamp holders and light fittings etc) and existing MS pressed steel / cast iron sunken boxes of suitable size for mounting switches / bell pushes / sockets, fan regulator etc covered with new 3 mm thick laminated bakelite sheet top cover including continuous earth wire of size 1.5 sqmm unsheated stranded copper conductor with green PVC insulation connected to common earth dolly complete all as specified and directed for the followings :- (a) One light/fan/Bell Point controlled by one single pole one way switch.

(b) One 5 Amps socket outlet same board controlled by one single pole 5 Amps switch

(c) One 5 Amps socket outlet independent board controlled by one single poles 5 Amps switch

All as per Item No 188 mentioned here-in- before but one three pin 15 Amps switch socket out let on the independent board with 2.5 Sq mm PVC insulated copper conductor and 2.5 Sqmm copper conductor for continuous earthing complete.

Supply and fixing Modular Switch one way 6 A, 1 module complete all as specified and directed. Make - Anchor/Havells/Legrand

Supply and fixing Modular Switch one way 16 A, 1 module complete all as specified and directed. Make - Anchor/Havells/Legrand

Supply and fixing Modular Socket, 6A - 2/3 pin combined 2 module complete all as specified and directed. Make - Anchor/Havells/Legrand

Supply and fixing Modular Socket, 6A/16A - 2/3 pin combined 2 module complete all as specified and directed. Make - Anchor/Havells/Legrand

Supply and fixing Modular white cover plate including GI box inner, 3 module complete all as specified & directed. Make : Anchor/Havells/Legrand

Supply and fixing Modular white cover plate including GI box inner, 4 modulecomplete all as specified & directed. Make : Anchor/Havells/Legrand

Supply and fixing Modular white cover plate including GI box inner, 8 module complete all as specified &directed. Make : Anchor/Havells/Legrand

Supply and fixing Modular step type regulator,120 W - 2 module complete all as specified and directed. Make - Anchor/Havells/Legrand

Supply & Fixing LED tube light fitting 20 Watts,4 feet long decorative ultra slim linear LED lighting fixture with extruded polycarbonate,environmental friendly, energy efficient 230V, complete with all accessories internally pre wired and including connecting up with twin core twisted flexible copper conductor cable with suitable size. Cat Part No LHEXBLP7PN1W020 Make - Havells or equivalent to Crompton/Bajaj/Philips

Supply and fixing of 7.5 W A60 LED Filament Lamp (White/Warm white) enegy saving including Decorative, wall mounting, antique brass finish fixture with opal glass diffuser suitable for 7.5 W A60 LED filament lamp E27 base.complete all as specified and directed. Cat Part No LHFOAJD1TZ1C060 of Havells or equivalent in any make.

Supply and fixing of LED Bright Lyts 6W Picture/Mirror/Spot/Bathroom/Display/Wall Flexible Neck Light (White) 2 ft adjustable type enegy saving curve type complete all as specified and direceted.

Supply & Fixing LED tube light fitting 18 Watts,4 feet long decorative ultra slim linear LED lighting fixture with extruded polycarbonate,environmental friendly, energy efficient 230V, complete with all accessories internally pre wired and including connecting up with twin core twisted flexible copper conductor cable with suitable size. Cat Part No LHEXBLP7UN1W018 Make - Havells or equivalent to Crompton/Bajaj/Philips

Supply and fixing of LED Mirror light 7 Watt 2 ft adjustable type enegy saving curve type complete all as specified and direceted. at Part no. LCL-07-CDL of Crompton or LHEXARP7PNIW009 of Havells or equivalent Bajaj/Phillips

Supply and fixing of LED Wall bracket light 8 Watt decorative type (Warm white) enegy saving including 8 W LED Bulb complete all as specified and directed. Cat Part no LHJE01106499 of Havells or equivalent Crompton/Bajaj/Phillips

Supply and fixing ceiling fans complete with blades, down rods, electronic regulator and accessories, 230 V, 1200mm sweep. Min air delivery 210 CFM with service value 6.00 BEE. Five star rated with brushless direct current motor (BLDC) complete all as specified.

Supply Installation commissioning & testing of water heater storage type electric capacity 25 ltsr, BEE 5 Star rated complete with all accessoriessuch as safety valve, thermostate, NRV, connection piece etc. Electric Storage water Heater Monza DX Cat Part No GHWAMGTWH025 of Havells or equivalent in any other make.

Supply and fixing LED Bldg Security light fitting 35 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection complete. complete all as specified and directed. Cat Part No. TRP-400-35-57-SL-LM-NSR of Crompton or equivalent of Bajaj/Havells/Philips

Supply & Fixing Lamp holder PVC/Polycarbonate,isolated with back plate suitable for batten fittings including 10W LED Bulb omplete all as specified and directed.

Supply and fix exhaust fan, steel body AC single Phase. 230V of size 450 mm sweep with, blades, and frame and louvers complete all as specified and directed.

Supply and fix exhaust fan made of sturdy Engineering plastic complete with louvers shutter, voltage 230V, 50 Hz, RPM 1200, Copper winding of sweep 300mm complete all as specified and directed.

Supply and fixing exhaust fan heavy duty with louvers complete of sweep size 300mm, 900 RPM, single phase, with bolts, nuts and washers, size of the bolt 15 cm long 12mm dia embedded in the wall including provision of PVC flexible copper cable of size 23/00.0076 three core from ceiling rose to exhaust fan max 1.5 mtr for giving connection complete all as specified.

Supply and fix wall mounted fan of size 400 mm sweep AC single phase 230V. Make of fan Crompton/Bajaj/Khaitan/Havells all as direted by Engineer-in-charge .

Cutting holes making good the distributed surface, grouting nuts for fixing of Exhaust fans complete all as specified and directed.

Supply and fixing Ceiling rose surface type, PVC/polycarbonate ,isolated, bakelite 65 x 50mm, 3 terminals ISI marked.

Supply and fixing Modular bell push piano flush type 6 Amps 1 module duly ISI marked.

Supply and fixing bell ding dong AC 230 volts single pole complete all as specified and directed

Supply & Fixing sheet metal enclouser double door factory made powder coated out of CRCA mild steel sheet 1.2 mm thick wih metallic painting white series TPN DBs (Vertical type)fitted with ABS frame and 415 volts 200 Amps rated enameled bus bar 4 way dust and vermin proof ssuitable for incorporation of MCBs duly concealed in wall and making good to distrubed surface and colour matching complete all as specified

Supply and fixing MCCB 4 pole, 415 volts, 100 Amps, 36 kA, 50 Hz complete all as specified and directed.

Supply & Fix in repair sheet metal enclouser SPN DB's 8 way double door factory made powder coated out of CRCA mild steel sheet 1.2 mm thick wih metallic painting white series, 240 volts 200 Amps rated enameled bus bar 8 way dust and vermin proof ssuitable for incorporation of MCBs duly concealed in wall and making good to distrubed surface and colour matching complete all as specified.

Supply and fixing MCB SPN, 40A - 63Amps, 240 volts, "C" series, 10KA duly, in MCB DB, complete with connection testing and commissioning all as specified

Supply and fixing MCB single pole neutral(SPN) 240 volts, 40 Amps, 10 KA complete all as specified.

Supply and fixing MCB SP, 6A-32 Amps, 240 volts, "B" series, 10KA, in the MCB DB, complete with connection testing and commissioning all as specified

Supply and fixing MCB SP, 40 Amps, 240 volts, "B" series, 10KA, in the MCB DB, complete with connection testing and commissioning all as specified

Supply and fixing Sheet metal enclosure with socket plug top and MCBs single pole and neutral enclosure with a two pin and earth plug and socket complete with one single pole MCB of capacity 20 Amps complete all as directed.

Supply and fix modular type AC motor starter 25 Amps 230 volts Two module complete all as specified and directed. Make : Havells Cat Part No AHFSMXW251 or equivqlent

Supply and fix modular type 10 A / 25 A shuttered socket, 230 volts Two module complete all as specified and directed. Make : Havells Cat Part No AHFKCXW253 or equivqlent

Supply & Fix in repair sub main wiring of 4 sqmm PVC insulated unsheathed FRLS cable multistranded copper conductor with earth wire of 4.0 sqmm PVC insulated unsheathed FRLS cable multistranded copper conductor including PVC conduit pipe 25 mm dia all as specified and directed. Note: Two run of single core 4 sqmm cable and one run single core 4.0 sqmm cable for earth wire and including conduit pipe 25 mm dia shall measured as one length).

Material and Labour for sub main wiring with two single core PVC insulated FRLS cable with Copper conductor unsheathed cable of size 2 x 6 sqmm drawn through in and including PVC Concealed with 1 x 6 sqmm PVC insulated copper conductor single core for continuous earthing complete including PVC conduit 25 mm dia Note : Two run of single core PVC insulated cable with Copper conductor unsheathed cable of size 6.0 Sqmm and one run of 6.0 Sqmm PVC insulated copper conductor single core,one run of PVC conduit shall be measured as single run)

Earthing complete with galvanized steel plate elecrode of size 60 cm x 60cm x 6.0 mm thick burried directly in ground vertically to a depth not less than 2.5 mtr below the ground level with top edge of earth plate at a depth not less than 1.5 mtr below ground level. Earth plate surrounded by 15mm thick packed alternative layers of charcoal dust and comman salt, earth lead GI wire of 4mm dia (8 SWG) by means of bolts , nuts, check nuts and washers of galvanised iron with thimbles. The other end of GI earth wire is connected to main switch board and protected by light grade GI pipe of 15 mm bore. provision of 20mm bore light grade GI pipe for watering including GI funnel and wire mesh. Pipe shall be provided vertically upto top level of earth pit and then taken horrizontally to the earth pit. Cement concrete chamber of PCC ( 1:3:6 ) type C-2using 40 mm graded stone aggregate.The chamber shall be constructed one metre away from edge of earth pit. 50 mm thick pre cast cover of cement conrete (1:2:4) type B-1 using 20 mm graded stone aggregate and MS angle iron 50 x 50 x 6 mm frame including two coats of painting over a red oxide to spoxsed steel surfaces. excavation in soft / loose soil, returning filling and removal of surplus soil to a distance of 50 mm as directed and shown in Electrical Plate No- 3 of SSR Part-1 (2009)

Supply and lay cable XLPE insulated screened PVC bedded, galvanised steel strip or wire armoured, electric power cables (Heavy duty) 1100 volts grade with stranded aluminium conductor of size 50 Sqmm 3.5 core.

Material and Labour Bricks; common burnt clay building bricks, sub-class ‘B’ designation 75 laid dry width wise acrose the line of cable in trenches for protection of UG cable.

Mild steel galvanised iron pipe light grade (ISI marked) 40mm bore for passing of earth lead laid in trenches fixed to walls laid under floors, roads including all fittings i.e MS clamps nuts & bolts etc as required all as specified.

M/S Pee Kay Builders

manoj and company

Harmesh Kumar Sharma and Sons

shivam builders

R.S.ENTERPRISES

Karan Engineers

M/s Manoj Construction Co.