Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Tender Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Status |
|---|---|---|
| 1 | Admitted-Finance | Admitted-Finance |
| 2 | Admitted-Finance | Admitted-Finance |
| 3 | Rejected-Technical | Rejected-Technical Rejected |
Tender Value
₹9.1 L
EMD Value
₹18,175
Closing Date
18 Dec 2023, 10:00 amClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
The Director
CSIR-NAL Kodihalli Bengaluru
Providing additional power supply to proposed LSI Furnace at CVI facility,MSD division, CSIR-NAL, Kodihalli. campus, Bengaluru 560017
2023_CSIR_177059_1
ESD-NAL/07/E of 2023-24
Open Tender
Electrical Works
Item Rate
120 days
CSIR-NAL Kodihalli Bengaluru
Please refer the Tender Document
11 documents required · 11 mandatory
₹500
The Director, CSIR-NAL
₹18,175
10 Jan 2024
8 Dec 2023
19 Dec 2023
8 Dec 2023
18 Dec 2023
8 Dec 2023
Amount
Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size direct in ground including excavation, sand cushioning, protective covering and refilling the trench etc. as required.
Above 95 sq. mm and upto 185 sq. mm
Laying of one number additional PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size direct in ground in the same trench in one tier horizontal formation including excavation, sand cushioning, protective covering and refilling the trench etc. as required.
Above 95 sq. mm and upto 185 sq. mm
Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size in the existing RCC/ HUME/ METAL pipe as required.
Above 95 sq. mm and upto 185 sq. mm
Laying and fixing of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size on cable tray /surface as required.
Above 95 sq. mm and upto 185 sq. mm (clamped with 25/40x3mm MS flat clamp)
Supplying and laying 25 mm X 5 mm G.I strip at 0.50 meter below ground as strip earth electrode, including connection/terminating with G.I. nut, bolt, spring, washer etc. as required.(Jointing shall be done by overlapping and with 2 sets of G.I. nut bolt & spring washer spaced at 50mm)
Supplying and fixing 25 mm X 5 mm G.I. strip on surface or in recess for connections etc. as required
Supplying and installing following size of perforated Hot Dipped Galvanised Iron cable tray (Galvanisation thickness not less than 50 microns) with perforation not more than 17.5%, in convenient sections, joined with connectors, suspended from the ceiling with G.I. suspenders including G.I. bolts & nuts, etc. as required
225 mm width X 50 mm depth X 1.6 mm thickness
Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required.
3½ X 185 sq. mm (57mm)
Supply and fixing of 500A rating MCCB 25 kA, (Ics=Icu), 3P Moulded case circuit breaker having O/L, S/C, protection. The MCCB shall be provided with spreader links, barrier, RHOM. The MCCB shall be mounted on suitable size enclosure made out of using 2mm thick sheet steel with powder coated paint with IP 20 protection. The neutral link (copper busbar) of suitable size & necessary earth link shall be provided as per standard practice. The multifunction meter (V, A, F) and RYB indication with necessary control MCBs, the provision shall be made available for terminating 2 runs of 4C x185 sq.mm A2XFY cables as required. The enclosure shall be mounted on the stone / brick masonry wall using necessary wall clamps and fasteners as required. The GA shall got approved before fabrication.
Replacement of 400A TP MCCB with supply installation testing commissioning of 630A TP MCCB on the existing Feeder Piller with retrofit work. The existing MCCB has connected one of the out going feeder of feeder piller. The existing MCCB incoming side aluminium bus bar has tapped from the main bus bar and out going side bus bar has extended up to cable alloy chamber to terminate the cables. The capacity of bus bar both incoming and outgoing side have 400A. The bus bar length shall be 350mm each phase approximate on both the side. The same shall be replaced with 630A capacity. The necessary rotary operated handle mechanism (ROHM) shall be provided. The existing make and model no of 400A MCCB shall be ABB Tmax T5N400 (LSIG). The same make and model no: T5N630 (LSIG) for 630A shall be supplied, installed and commissioned.
Supply of 3.5 C X 185 sqmm. Power Cables with Solid Aluminum stranded conductor,XLPE Insulated, cores laid up, PVC tape inner sheathed, flat armoured,extruded PVC Type ST2 sheathed,1100V grade as per IS 7098(Part 1).
Supply, installation, testing & commissioning of maintenance free earthing system using 3000 mm length, 77-80 mm outer dia copper bonded M.S. Pipe as primary electrode. The Copper bonded pipe electrodes shall be of molecularly bonding of pure electrolytic copper (99.9%) with the thickness/bonding of ranging from 50 to 100 microns. The hollow space of the electrode shall be duly filled using high conductive and non-corrosive compound to withstand fault current lands on the electrode. Both the ends of the pipe / electrode shall be permanently sealed and the top portion of the earth electrode shall be provided with extended lead holes on the terminal for connecting to the earth terminals. The electrode shall be directly buried in the ground. The earth pit shall be refilled using environment friendly low resistance grounding minerals having a combination of graphite & natural earth minerals to form a low resistance zone all round the electrode. The required quantity of water shall be poured inside the earth pit as per the OEM recommendations as required. The necessary earth chamber shall be provided using ready made cement concreate chamber with removable concreate cement cover. The earth resistance shall be measured and displayed with all details on the alco panel/powder coated MS board near to the earthpit as per the site requirement.
Supply of 2000mm(L) x 1000mm(W) x 2mm thickness Insulating mats made of Elastomer (a generic term that includes rubbers, latex and elastomeric compounds that may be natural or synthetic or a mixture or a combination of both) the insulating mate shall be made out of elctromer with anti skid surface and without metallic derivatives. the mat shall be high dielectric strength and High insulation resistance. voltages up to 3.3kV ac as per IS15652 as required,
AKEY ELECTRO TECHNIQUES
stage.html
html • 0.03 MB
tech_eval.pdf
boq_comp_chart.xlsx
xlsx
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .