Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Infra Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹54.1 LAccepted-AOC C O RAMAKANT LAL NEAR PRATHMIK VIDYALAYA PANCH MASARHI DEOHALIA DHARAK ROAD KAIMUR KAIMUR BHABUA BIHAR 821110 UDYAM BR 04 0007990 | KAIMUR BHABUA | BIHAR | 821110 | L1 | Accepted-AOC L1 | |
| 2 | L2₹59.6 L+₹5.4 L (10.0%)Rejected-Finance | L2 | Rejected-Finance L2 | |
| 3 | L3₹69.0 L+₹14.8 L (27.3%)Rejected-Finance | L3 | Rejected-Finance L3 |
Tender Value
Refer Docs
EMD Value
₹1.5 L
Closing Date
15 Nov 2023, 2:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
CGM(E/M), Incharge C and P
Contracts and Procurement Deptt., NEEPCO Ltd., Lower New Colony, Shillong - 793003.
Repairing and Re-strengthening of Cooling Tower at Plant area of AGBPS, NEEPCO Ltd., Bokuloni, District, Dibrugarh, Assam.
2023_NEEPC_171067_1
NIB No. 435 Dated 18.10.2023
Open Tender
Civil Works - Others
Item Rate
180 days
AGBPS, NEEPCO Ltd., Bokuloni
3 documents required · 3 mandatory
₹2,360
Yes
NEEPCO Ltd., Shillong
₹1.5 L
Yes
19 Dec 2023
18 Oct 2023
16 Nov 2023
19 Oct 2023
15 Nov 2023
19 Oct 2023
19 Oct 2023 - 1 Nov 2023
Amount
Chipping of unsound / weak concrete materials from slabs, beam, columns etc. with manual chisel and/ or by stadard power driven percussion type of approved make including tappering of all edges, making square shoulders of cavities including cleaning the exposed concrete surface and reinforcement with wire brushes etc. and disposal of debries for all lead and lifts all complete as per direction of Engineer-In-charge. 25 mm average thickness
Cleaning of reinforcement from rust from the reinforcing bars to give it a total rust free steel surface by using alkaline chemical rust remover of approved make with paint brush and removing loose particles after 24 hours of its application with wire brush and thoroughly washing with water and allowing it to dry, all complete as per direction of Engineer-In-Charge.
Bars upto 12 mm diameter
Bars above 12 mm diameter
Supplying and applying two coats of Zinc rich anti-corrosive protective coating with "Nitozinc primer" of Fosroc or equivalent @ 0.20 Lit per Sqm over thoroughly cleaned and prepared steel bars including form work as directed and specified by the department complete.
Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete above plinth level. Thermo-Mechanically Treated bars of grade Fe-500D or more.
Providing, mixing and applying bonding coat of approved adhesive on chipped portion of RCC as per specifications and direction of Engineer-In-charge complete in all respect. SBR Polymer (@10% of cement weight ) modified cementitious bond coat @ 2.2 kg cement per sq m of surface area mixed with specified proportion of approved polymer.
Providing and inserting 12 mm dia galvanised steel injection nipple in honey comb area and along crack line including drilling of holes of required diametre (20 mm to 30 mm)up to depth from 30 mm to 80 mm at required spacing and making the hole & crack dust free by blowing compressed air, sealing the distance between injection nipple with adhesive chemical of approved make and allow it to cure complete as per direction of Engineer-In-Charge.
Providing and injecting approved grout in proportion recommended by the manufacturer into cracks/honey-comb area of concrete / masonry by suitable gun / pump at required pressure including cutting of nipples after curing etc. complete as per directions of Engineer-inCharge.
Stirrer mixed Acrylic Polymer of approved make @ 2 % of weight of cement used) modified Cement slurry made with non shrink compound in concrete / RCC work.
Epoxy injection grout in concrete / RCC work of approved make.
Providing, mixing and applying SBR polymer (of approved make) modified Cement mortar in proportion of 1:4 (1 cement: 4 graded coarse sand with polymer minimum 2% by wt. of cement used) as per specifications and directions of Engineer-in-charge. 25 mm average thickness in 2 layers.
Providing and applying Deckguard E2000 of Masterseal 878 of BASF or equivalent, a High Performance Anticarbonation Protective Coating System, over the prime surface using an airless spray or roller at right angles to each other @ coverage of 5 Sqm per litre per coat @200 micronswft/100microns DFT with an intercoat period of minimum 12 hrs @35ºC. The coverage per litre for 2 coats shall be 2.5 Sqm @ 200 microns DFT. The protective coating system should have CO2 diffusion resistance not less than 240 mm equivalent of air thickness and 60 cm equivalent of 30 N concrete along with a water vapour transmission resistance of less than 1.0 metre (Taywood method), the coating should have static crack accommodation of not less than 2 mm (BRE)and adhesion greater than 1.0 N / mm² as per BS 1881.
Finishing with Deluxe Multi surface paint system for interiors and exteriors using Primer as per manufacturers specifications: Two or more coats applied on walls @ 1.25 ltr / 10 sqm over and including one coat of Special primer applied @ 0.75 ltr /10
Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade: One or more coats on old work.
12 mm cement plaster of mix 1:4 (1 cement: 4 fine sand)
Dismantling old plaster or skirting raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 metres lead.
Scafolding Providing and fixing double scaffolding system (cuplocktype) on the exterior side, upto seven story height made with 40 mm dia M.S. tube 1.5 m centre to centre, horizontal & vertical tubes joining with cup & lock system with M.S. tubes, M.S. tube challies, M.S. clamps and M.S. staircase system in the scaffolding for working platform etc. and maintaining it in a serviceable condition for the required duration as approved and removing it there after. The scaffolding system shall be stiffened with bracings, runners, connection with the building etc wherever required for inspection of work at required locations with essential safety features for the work men etc. complete as per directions and approval of Engineer in-charge. The elevational area of the scaffolding shall be measured for payment purpose .The payment will be made once irrespective of duration of scaffolding.
Cleaning of exposed concrete surface of sticking material including loose and foreign material by sand blasting with coarse sand followed by and including cleaning with oil free air blast as per direction of Engineer in charge.
New Horizon Enterprise
M/s UNITED BUILDERS
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .