Construction of Community Hall at Banashankari Temple in Nekar Slum of Hubballi city.

Construction of Community Hall at Banashankari Temple in Nekar Slum of Hubballi city.

Providing and laying in position Cement Concrete for all Super structures of building Road works Water works Irrigation works super structure works of bridges upto 350 m height The granitetrapbasalt...

As per recommendations of Technical working group rates for formwork shall be added on percentage basis to the finished concrete item rate For Column form works consider 70 percentage ---- With all L...

As per recommendations of Technical working group, rates for formwork shall be added on percentage basis to the finished concrete item rate. For RCC Beam,Lintels form works consider 60%. ---- With al...

As per recommendations of Technical working group, rates for formwork shall be added on percentage basis to the finished concrete item rate. Chejjas, Canopy & Other Architectural projections of minor ...

As per recommendations of Technical working group, rates for formwork shall be added on percentage basis to the finished concrete item rate. For RCC Roof Slabs form works consider 50%. ---- With all ...

Supplying fitting and placing TMT FE 550 550D Steel Reinforcement including cost of all materials machinery labour cleaning straightening cutting bending hooking lapingwelding joints tying with bind...

Providing Brick work with common burnt clay Non Modular bricks of class designation 35 in superstructure above plinth level in all shapes and sizes in Cement mortar 16 1 cement 6 coarse sand includin...

Providing 12 mm cement plaster with cement mortar 14 1 cement 4 fine sand to brick masonry including rounding off corners wherever required smooth rendering providing and removing scaffolding includ...

Providing 18 mm cement plaster in two coats under layer 12 mm thick cement plaster with cement mortar 15 1 cement 5 coarse sand finished with a top layer 6 mm thick cement plaster with cement mortar ...

Providing 6 mm cement plaster with cement mortar 13 1 cement 3 fine sand on concrete surface ceilings including rounding off corners wherever required smooth rendering providing and removing sc...

Providing lath plaster with cement mortar 13 5cms thick with 6mm dia mild steel bars at 20 cms c to c both horizontally and vertically fixed with chicken mesh for drop chajjafacia backing to cup board...

Providing and applying white cement based putty of average thickness 1 mm of approved brand and manufacturer over the plastered wall surface to prepare the surface even and smooth complete as per spec...

Finishing walls with Acrylic Smooth exterior paint of required shade New work Two coat applied 167L10 m over and including priming coat of exterior primer applied 220 kg10 m with paint of approved q...

Finishing with Deluxe Multi surface paint system for interiors and exteriors using Primer as per manufacturers specifications Two coats applied on walls 125 L10 m over and including one coat of Speci...

Painting with synthetic enamel paint of approved brand and manufacture to give an even shade Two coats on new work after thoroughly brooming the surface to remove all dirt dust mortar drops and foreig...

Design supply installation of suspended Spider Glazing system designed to withstand the wind pressure as per IS 875 PartIII The Suspended System held with Spider Fittings of SS316 Grade Steel of appr...

Providing and fixing MS grills of required pattern in frames of windows etc with MS flats square or round bars etc including priming coat with approved steel primer all complete Fixed to steel windows...

Providing and fixing factory made single extruded WPC Wood Polymer Composite solid doorwindowClerestory windows other Frames Chowkhat comprising of virgin PVC polymer of K value 5860 Suspension Grade...

Providing and fixing factory made Green certified Anti Termite UV resistant high water absorbant single extruded WPC Wood PolymerComposite solid plain flush door shutter of required size comprising of...

Providing and fixing door latch with necessary screws etc complete Oxidised mild steel door latch ---- With all Lead and Lift Loading and unloading as per the direction of engineer in charge

Providing and fixing ISI marked oxidised MS handles conforming to IS4992 with necessary screws etc complete 125mm ---- With all Lead and Lift Loading and unloading as per the direction of engineer i...

Providing and fixing stainless steel 304 grade fancy handle of approved make fixed with SS screws etc complete as per direction of Engineerin charge 150 mm length ---- With all Lead and Lift Loading...

Providing and fixing door latch with necessary screws etc complete Bright finished brass latch ---- With all Lead and Lift Loading and unloading as per the direction of engineer in charge

Providing and fixing aluminium tower bolts ISI marked anodised anodic coating not less than grade AC 10 as per IS 1868 transparent or dyed to required colour or shade with necessary screws etc com...

Providing and fixing PTMT door catcher of length 72 mm and dia of 42 mm with suitable washers weighing not less than 33 gms ---- With all Lead and Lift Loading and unloading as per the direction of e...

Providing and laying flamed finish Granite stone flooring in required design and patterns in linear as well as curvilinear portions of the building all complete as per the architectural drawings with ...

Providing skirting dadooing rises of steps with colour glazed tiles 6mm thick on 10mm thick cement plaster 13 and jointed with white cement slurry over existing rough plaster surface using glazed tile...

Providing and fixing stainless steel Grade 304 railing made of Hollow tubes channels plates etc including welding grinding buffing polishing and making curvature wherever required and fitting the sam...

Providing and laying flooring and steps machine cut granite slabs 40 mm thick on cement mortar bed 16 25 mm thick and pointed with cement mortar 13 over existing cement concrete bed including cost of...

Providing and laying water proofing treatment to the Roof with PU based single component elastomeric pure polyurethane based coating on New terrace/Chajjas/Sunken portion of WC:Bathroom, cold applied ...

Providing and fixing false ceiling at all height including providing and fixing of frame work made of special sections power pressed from MS sheets and galvanized with zinc coating of 120 g. both side...

Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS: 13592 Type A, including jointing with seal ring conforming to IS: 5382, leaving 10 mm gap for thermal expan...

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe wi...

Providing and fixing brass bib cock of approved quality : 20 mm nominal bore. ---- With all Lead and Lift Loading and unloading as per the direction of engineer in charge

Providing and fixing brass stop cock of approved quality : 20 mm nominal bore. ---- With all Lead and Lift Loading and unloading as per the direction of engineer in charge

Providing and fixing ball valve (brass) of approved quality, High or low pressure, with plastic floats complete : 20 mm nominal bore. ---- With all Lead and Lift Loading and unloading as per the dire...

Providing and fixing Brass full way valve gate with C.I. wheel of approved quality (screwed end) :25 mm nominal bore. ---- With all Lead and Lift Loading and unloading as per the direction of enginee...

Providing and fixing Brass full way valve gate with CI wheel of approved quality screwed end 32 mm nominal bore ---- With all Lead and Lift Loading and unloading as per the direction of engineer in c...

Providing and fixing Brass full way valve gate with CI wheel of approved quality screwed end 50 mm nominal bore ---- With all Lead and Lift Loading and unloading as per the direction of engineer in ...

Providing and fixing unplasticised PVC connection pipe with brass unions 45 cm length 20 mm nominal bore ---- With all Lead and Lift Loading and unloading as per the direction of engineer in charge

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with cla...

Providing and fixing Chlorinated Polyvinyl Chloride CPVC pipes having thermal stability for hot cold water supply including all CPVC plain brass threaded fittings including fixing the pipe with cl...

Providing and fixing Unplasticised Polyvinyl Chloride uPVC pipes for cold water supply including all uPVC plain brass threaded fittings This includes jointing of pipes fittings with one step uPVC ...

Providing and fixing wash basin with CI brackets 15 mm CP brass pillar taps 32 mm CP brass waste of standard pattern including painting of fittings and brackets cutting and making good the walls whe...

Providing and fixing PVC SWR Gully Trap 10cms x 10cms with all fitting arrangements all necessary accessories complete ---- With all Lead and Lift Loading and unloading as per the direction of engin...

Providing and fixing PVC (S.W.R) Nahani Trap 10cms x 10cms with all fitting arrangements & all necessary accessories complete. ---- With all Lead and Lift Loading and unloading as per the direction o...

Providing and placing on terrace at all floor levels polyethylene water storage tank IS 12701 marked with cover and suitable locking arrangement and making necessary holes for inlet outlet and overfl...

Open Conduit SystemSupplying heavy gauge PVC conduit pipe ....... dia ....... mmthick confirming to IS 2509 with suitable size bends, junctionboxes, adhesive paste etc , and fixing using inverted wood...

Concealed Conduit System Supplying heavy gauge PVC conduit pipe 25 mm dia 2mm thick confirming to IS 2509 with suitable size bends metalPVC Junction boxes adhesive paste etc and running before concret...

Supplying heavy gauge PVC Conduit Pipe 1920 dia 2 mm thick with suitable size bends metal junction boxes adhesive paste etc by groove cutting in the wall and fixing by bracing U or J hooks and cement ...

Point wiring using Copper wire without switch Supplying and wiring adopting loop system in existing PVCConduit casing capping casing capping using 2x15SqmmPhase Neutral 1x10 sqmm Earth wire FRLSmult...

Point wiring using Copper wire without switch Supplying and wiring adopting loop system in existing PVCConduit casing capping casing capping using 2x15SqmmPhase Neutral 1x10 sqmm Earth wire FRLSmult...

Point wiring using Copper wire without switch Supplying and wiring adopting loop system in existing PVC Conduit casing capping casing capping using 2x15SqmmPhase Neutral 1x10 sqmm Earth wire FRLSmul...

Wire Wiring for lightingpower circuit using one of FRLS PVCinsulated 1100V grade multistrand copper wire with lowconductor resistance single core in open or concealedsystem of wiring with specified IS...

Wire Wiring for lightingpower circuit using one of FRLS PVCinsulated 1100V grade multistrand copper wire with lowconductor resistance single core in open or concealedsystem of wiring with specified IS...

Wire Wiring for lightingpower circuit using one of FRLS PVCinsulated 1100V grade multistrand copper wire with lowconductor resistance single core in open or concealedsystem of wiring with specified IS...

Wire Wiring for lightingpower circuit using one of FRLS PVCinsulated 1100V grade multistrand copper wire with lowconductor resistance single core in open or concealedsystem of wiring with specified IS...

GI modular box Supplying and flush mounting powdercoatedgalvanized metalboxsuitablefor mountingmodular switchplatesTheboxshouldbefirmlyflush mounted after due groove cutting in BrickStoneCC wall34112 ...

GI modular box Supplyingandflushmountingpowdercoated galvanizedmetalbox suitable for mounting modularswitchplatesTheboxshouldbefirmlyflush mounted after due groove cutting in BrickStoneCC wall 342 3 W...

GI modular boxSupplyingandflushmountingpowdercoatedgalvanizedmetalboxsuitable formountingmodularswitchplatesTheboxshouldbefirmlyflush mounted after due groove cutting in BrickStoneCC wall34345 Way ---...

GI modular boxSupplyingandflushmountingpowdercoatedgalvanizedmetal boxsuitableformountingmodularswitchplatesTheboxshouldbefirmlyflush mounted after due groove cutting in BrickStoneCCwall3446 Way ---- ...

GI modular boxSupplyingandflushmountingpowdercoatedgalvanizedmetalboxsuitable formountingmodularswitchplatesTheboxshouldbefirmlyflush mounted after due groove cutting in BrickStoneCCwall 3458Way ---- ...

GI modular box Supplyingandflushmountingpowdercoatedgalvanizedmetalboxsuitable formountingmodularswitchplatesTheboxshouldbefirmlyflush mounted after due groove cutting in BrickStoneCCwall 3461012Way -...

GI modular box Supplyingandflushmountingpowdercoatedgalvanizedmetalboxsuitable formountingmodularswitchplatesTheboxshouldbefirmlyflush mounted after due groove cutting in BrickStoneCCwall 347 16Way --...

GI modular box Supplyingandflushmountingpowdercoatedgalvanizedmetalboxsuitable formountingmodularswitchplatesTheboxshouldbefirmlyflush mounted after due groove cutting in BrickStoneCCwall 34818Way ---...

modular Switch Plate Supplying and fixing superior quality modular switchmounting polycarbonate plate with necessary supportingback plate with required nos of machine screws bolts nutsetc complete on ...

modular Switch Plate Supplying and fixing superior quality modular switchmounting polycarbonate plate with necessary supportingback plate with required nos of machine screws bolts nutsetc complete on ...

modular Switch Plate Supplying and fixing superior quality modular switchmounting polycarbonate plate with necessary supportingback plate with required nos of machine screws bolts nutsetc complete on ...

modular Switch Plate Supplying and fixing superior quality modular switchmounting polycarbonate plate with necessary supportingback plate with required nos of machine screws bolts nutsetc complete on ...

modular Switch Plate Supplying and fixing superior quality modular switchmounting polycarbonate plate with necessary supportingback plate with required nos of machine screws bolts nutsetc complete on ...

modular Switch Plate Supplying and fixing superior quality modular switchmounting polycarbonate plate with necessary supportingback plate with required nos of machine screws bolts nutsetc complete on ...

Modular Switch Plate Supplying and fixing superior quality modular switchmounting polycarbonate plate with necessary supportingback plate with required nos of machine screws bolts nutsetc complete on ...

Modular Switch Plate Supplying and fixing superior quality modular switchmounting polycarbonate plate with necessary supportingback plate with required nos of machine screws bolts nutsetc complete on...

Modular switch Supplying and fixing of modular switch connectedaccessories on existing modular switch plate as per IS 3854and IS 12933616Amps one way switch ---- With all Lead and Lift Loading and un...

Modular switch Supplying and fixing of modular switch connectedaccessories on existing modular switch plate as per IS 3854and IS 12933626Amps two way switch ---- With all Lead and Lift Loading and un...

Modular socket Supplying and fixing of modular switch connected accessories on existing modular switch plate as per IS 3854 and IS 129 3363 6 Amps 3way socket ---- With all Lead and Lift Loading and ...

Modularswitch Supplying and fixing of modular switch connected accessories on existing modular switch plate as per IS 3854and IS 129 3367 16A One Way Switcht ---- With all Lead and Lift Loading and u...

Modular socket Supplying and fixing of modular switch connectedaccessories on existing modular switch plate as per IS 3854and IS 12933610616A Universal Socket ---- With all Lead and Lift Loading and ...

Ceiling Rose Supplying and fixingreplacing of 61632Amps electrical accessories on existing switch board 3145 6 Amps Ceiling Rose ---- With all Lead and Lift Loading and unloading as per the direction ...

Batten Holder Supplying and fixingreplacing of 61632Amps electrical accessories on existing switch board 3147 6A Batten Holder ---- With all Lead and Lift Loading and unloading as per the direction of...

LED Square Type Fitting Supplying of recess mounting non integral type LED wluminaire comprising of pressure decastextruded aluminium housing with spring loaded false ceiling clamps Power LEDs with ...

LED Square Type Fitting Supplying of recess mounting non integral type LED wluminaire comprising of pressure decastextruded aluminium housingwith spring loaded false ceiling clamps Power LEDs with C...

LED Tube Fitting Supplying of feet PVC Batten with integrated LED tube W with high quality diffuser with Life of 25000 burning hours 70 lumen maintenance with CRI 80 PowerInput 220240V 506 0Hz P...

LED Fitting fixing Charges Fixing all types and all capacities of fluorescent false ceiling spot light CFL LED fittings indoor on the wall ceiling rafters girders using 2300076 twin twisted PVC...

Supplying of Ceiling Fanwith Capacitorrating As per guideline of BEE5 starrating and IS37419 and also comply with IS17091984 with latest amendment Rated voltage 220V50Hz Rated powerup to 35 W 0 Ratedc...

Supplyingwallmountingfansuitabletooperateatsinglephase230v AC supply 400 mm Sweep ---- With all Lead and Lift Loading and unloading as per the direction of engineer in charge

Fixing a ceiling wall mounting fan of all capacities and all types with necessary clA and S hook made out of 15mm dia MS rod with 5 A ceiling rose of approved quality with necessary length of 2300076 ...

Supplying And Fixing Metal Fan Box with Round Hook ---- With all Lead and Lift Loading and unloading as per the direction of engineer in charge

Supplying and fixing of modular switch connected accessories on existing modular switch plate as per IS 3854and IS 1293 364Stepped Fan Regulator Two Module ---- With all Lead and Lift Loading and unl...

Supplying of 1440rpm heavy duty exhaust fan with bracket blades suitable to operate on 230V 50Hz AC Supply complete 48 Sweep1200mm621 12 Sweep 300mm ---- With all Lead and Lift Loading and unloading a...

Fixing one exhaust fan after making a suitable notch in the wall and finishing with cement mortar and colouring to match the existing wall or brackets with bolts and nuts and a 5 A ceiling rose with s...

LEDLamps Supplying fixing of retrofit type LED bulb W with OPAL acrylicdiffuser comprising of LED source with CCT 6500 degree K CRI 70efficacy 80 lumen per W life 25000 burning hours and Compliance...

MCB Switches Supplying and fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and C Type curve indicator ONOFF energy cross3 with Short circuit brea...

MCB Switches Supplying and fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and C Type curve indicator ONOFF energy cross3 with Short circuit brea...

MCB Switches Supplying and fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and C Type curve indicator ONOFF energy cross3 with Short circuit brea...

RCCB Switches SupplyingfixingandwiringResidualcurrentcircuitbreakerRCCB240450V upto 300mA sensitivity on existing wood panel board520116A25A 2 pole ---- With all Lead and Lift Loading and unloading as...

RCCB Switches Supplying fixing and wiring Residual current circuitbreaker RCCB 240450 V upto 300mA sensitivity on existing wood panel board 5206 16A25A 4 pole ---- With all Lead and Lift Loading and u...

MCB distribution boards Supplying and fixing regular MCB distribution boards on wall wood board flush mounting using required clamps boltsnuts etc with provision for fixing suitable type capacityMCBs ...

Earthing Supplying fixing wiring earth electrode for grounding conduits ICcutouts and other equipments on the meter board using 40 mm dia290 mm thick GI pipe 25m long buried in a pit The pit should ...

Guy Wire GI Wire as per IS2141 802 8 SWG GI Wire 4064 mm Dia Std Wt 131 KgKM ESCOMs ---- With all Lead and Lift Loading and unloading as per the direction of engineer in charge

MS box Fabricating supplying and mounting MS box made out SWG suitable for floor wall mounting fully weather proof with provision for better heat dissipation provided with hinged front cover equipp...

Supplying and fixing angle iron frame work fabricated out of MS angle iron and MS flat with bolts washers etc and painted with 2 coats of red oxide and then two coats of approved paint 541140 x 40 x ...

Supplying amps rated 3phase with neutral bus bar using required capacity electrolytic aluminium strips covered with heat shrinkable coloured PVC sleeve mounted on phenolic FRP DMC insulator which are...

MCB Switches Supplying and fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and C Type curve indicator ONOFF energy cross3 with Short circuit brea...

MCB Switches Supplying and fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and C Type curve indicator ONOFF energy cross3 with Short circuit brea...

SupplyingandfixingMouldedCaseCircuitBreakerMCCBovertheexistingwoodpanelboardusingnecessaryscrewsboltsnutsnecessaryphaseseparatorshandleandwiringcompleteProtectionofOverloadandShortcircuitwithadjustabl...

11 kV XLPE or Heat resistant PVCinsulated PVC exutruted Inner SeathArmoured LTUG Cable as per IS1554 Part 1 or IS7098 Part1 Armouring stripthickness and resistivity as per IS39753 205 11 kV XLPE or He...

Laying of cable in Existing TrenchGI pipeStone WareRCC Hume pipe using WoodenAluminum Rollers as directed by the departmental staff LT Cable 35 to 95 Sqmm ---- With all Lead and Lift Loading and unlo...

Epoxy Terminating Kit Pothead suitable for 11 kV LTUG Cable ---- With all Lead and Lift Loading and unloading as per the direction of engineer in charge

SupplyingofSwitchdisconnectorfuseunitTPNHRCtypebutwithout HRC fuses With AC23A duty and as per IS 1394758163 A ---- With all Lead and Lift Loading and unloading as per the direction of engineer in cha...

Supplying and fixing HRC fuse units base on existing switch panel board59232 to 63 A ---- With all Lead and Lift Loading and unloading as per the direction of engineer in charge

SupplyingandfixingHRCfuselinkonexistingswitchfusebasewithW loss as per IS137035101upto 63 A ---- With all Lead and Lift Loading and unloading as per the direction of engineer in charge

Supplying and fixing of LED type panel board indicating lamp with required colour suitable for 230440VAC 50 Hz 1224V DC 538 ---- With all Lead and Lift Loading and unloading as per the direction of en...

Supplying fixing and wiring 505 to 4005Amps 5VA burden Current Transformer Class 05 accuracy with Tape Wound534 ---- With all Lead and Lift Loading and unloading as per the direction of engineer in ch...

Supplying of multi function digital meter with three line back light LCD type display for voltage Current frequency Power power factor KVA KWH KVAR suitable for 3 phase 4 wire LT network with IP 54 de...

Supplying fixing and wiring earth leakage relay with core balanced current transformer suitable for single phase 50 Hz AC with latest microcontroller based digital readout of percentage leakage curren...

Aluminium End Terminal (Lug)60.05)50 Sqmm. ---- With all Lead and Lift Loading and unloading as per the direction of engineer in charge

Brass Cable Gland 630232 mm ---- With all Lead and Lift Loading and unloading as per the direction of engineer in charge

Supplying and fixing of LED Bulkhead of 10W with IP 65 protection and IK08 impact resistance suitable for surface and wall mounting applications ---- With all Lead and Lift Loading and unloading as pe...

Earth work excavation for Foundation by mechanical means for all works depth upto 3 m as per drawing and technical specifications including setting out shoring strutting barricading caution lights in...

Providing and laying in position plain cement concrete for levelling course for all works in foundation The granitetrapbasalt crushed graded coarse aggregates and fine aggregates as per relevant IS Co...

Providing and laying in Cement Concrete for all Basement surface level works return walls retaining walls sunken floors etc The ranitetrap basalt crushed graded coarse aggregates and fine aggregates...

Providing and laying in Reinforced cement concrete for all Basement surface level works return walls retaining walls sunken floors etc The granitetrapbasalt crushed graded coarse aggregates and fine ...

Providing and laying in Reinforced cement concrete for all Basement surface level works return walls retaining walls sunken floors etc The granitetrapbasalt crushed graded coarse aggregates and fine ...

Supplying fitting and placing TMT FE 550 550D Steel Reinforcement including cost of all materials machinery labour cleaning straightening cutting bending hooking lapingwelding joints tying with bindi...

Providing Random rubble masonry with hard stone in foundation and plinth including levelling up with cement concrete 1612 1 cement 6 coarse sand 12 graded stone aggregate 20 mm nominal size upto pli...

Filling available excavated earth excluding rock in trenches plinth sides of foundations and other similar works etc in layers not exceeding 20cm in depth consolidating each deposited layer by ramming...

Providing and constructing load bearing wall with Solid Concrete blocks of size 400x200x200mm having block density more than 1800kgm3 and minimum compressive strength of 400 Nm. conforming to IS 2185 ...

Providing 18 mm cement plaster in two coats under layer 12 mm thick cement plaster with cement mortar 15 1 cement 5 coarse sand finished with a top layer 6 mm thick cement plaster with cement mortar ...

Finishing walls with water proofing cement paint of required shade New work Two coats applied 484 kg10 m to give an even shade after thoroughly brooming the surface to remove all dirt dust mortar dro...

Providing and fixing MS Tubular frames for doors windows ventilators and cupboard with rectangular LType sections made of 160 mm thick MS Sheet joints mitred welded and grinded finish with profiles of...

Construction of Embankment by excavating the available approved Gravel Murrum deposited at a place or borrow pits during or prior excavation with all lifts and lead transportation to site spreading gr...

Providing and laying 80mm thick factory made precast M 30grade Cement Concrete Paver Block as per IRC SP 632018 IS 15658 for Commercial Traffic Axle load repetitions upto 10MSA for Residential Street...

Demolishing brick work manually/ by mechanical means including stack ing of serviceable material and disposal of unserviceable material to the appropriate disposal area as per direction of Engineer-in...

Demolishing R.C.C. work manually/ by mechanical means including stack ing of steel bars and disposal of unserviceable material to the appropriate disposal area as per direction of Engineer-in-charge. ...

Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution li...

Providing and laying in position Cement Concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes...

Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations and other similar works etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by r...

Filling approved earth (excluding rock) in trenches, plinth, sides of foundations and other similar works etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and ...

Providing and laying in position plain cement concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS...

Providing and laying in position Cement Concrete for all Foundation works. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with supe...

As per recommendations of Technical working group, rates for formwork shall be added on percentage basis to the finished concrete item rate. For Foundation form works consider 8% ---- With all Lead a...

As per recommendations of Technical working group, rates for formwork shall be added on percentage basis to the finished concrete item rate. For RCC Columns / Shaft (Slip Centering) 70% ---- With all...

Providing and laying in Cement Concrete for all Basement & surface level works, return walls, retaining walls, sunken floors etc. The granite/trap/ basalt crushed graded coarse aggregates and fine agg...

As per recommendations of Technical working group, rates for formwork shall be added on percentage basis to the finished concrete item rate. For Plinth beam form works consider 50% ---- With all Lead...

Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite...

As per recommendations of Technical working group, rates for formwork shall be added on percentage basis to the finished concrete item rate. For Column form works consider 70% ---- With all Lead and ...

As per recommendations of Technical working group, rates for formwork shall be added on percentage basis to the finished concrete item rate. For RCC Beam,Lintels form works consider 60% ---- With all...

As per recommendations of Technical working group, rates for formwork shall be added on percentage basis to the finished concrete item rate. Chejjas, Canopy & Other Architectural projections of minor ...

As per recommendations of Technical working group, rates for formwork shall be added on percentage basis to the finished concrete item rate. For RCC Roof Slabs form works consider 50% ---- With all L...

As per recommendations of Technical working group, rates for formwork shall be added on percentage basis to the finished concrete item rate. For Staircase and other similar works form works consider...

As per recommendations of Technical working group, rates for formwork shall be added on percentage basis to the finished concrete item rate. Earth retaining structures form works consider 10% ---- Wi...

Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/welding joints, tyi...

Providing and constructing load bearing wall with Solid Concrete blocks of size 400x200x200mm having block density more than 1800kg/m3 and minimum compressive strength of 4.00 N/m. conforming to IS 21...

Providing Brick work with common burnt clay Non Modular bricks of class designation 3.5 in superstructure above plinth level in all shapes and sizes in Cement mortar 1:6 (1 cement : 6 coarse sand) inc...

Providing Half brick masonry with common burnt clay Non Modular bricks of class designation 3.5 in superstructure above plinth level up to floor 1 level cement mortar 1:4 (1 cement :4 coarse sand) ...

Providing 12 mm cement plaster with cement mortar 1:4 (1 cement: 4 fine sand) to brick masonry including rounding off corners wherever required smooth rendering, providing and removing scaffolding, ...

Providing 18 mm cement plaster in two coats under layer 12 mm thick cement plaster with cement mortar 1:5 (1 cement : 5 coarse sand) finished with a top layer 6 mm thick cement plaster with cement mor...

Providing 6 mm cement plaster with cement mortar 1:3 (1 cement : 3 fine sand) on concrete surface / ceilings including rounding off corners wherever required smooth rendering, providing and remov...

Providing lath plaster with cement mortar 1:3, 5cms thick with 6mm dia mild steel bars at 20 cms. c to c both horizontally and vertically fixed with chicken mesh for drop chajja,facia, backing to cup ...

Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete as per sp...

Finishing walls with Acrylic Smooth exterior paint of required shade :New work (Two coat applied @ 1.67L/10 m² over and including priming coat of exterior primer applied @ 2.20 kg/10 m²) with paint ...

Finishing with Deluxe Multi surface paint system for interiors and exteriors using Primer as per manufacturers specifications: Two coats applied on walls @ 1.25 L/10 m² over and including one coat of...

Painting with synthetic enamel paint of approved brand and manufacture to give an even shade :Two coats on new work after thoroughly brooming the surface to remove all dirt, dust, mortar drops and for...

Providing fixing of 2track x 2panel sliding windows made out of multi chambered UPVCMatching to RAL9016 sections and with minimum TiO2Titanium Dioxide at 6 PHR with TPE Thermo Plastic Elastomer and l...

Providing fixing of louvered ventilator made out of multi chambered UPVCMatching to RAL9016 sections and with minimum TiO2Titanium Dioxide at 6PHR with TPEThermo Plastic Elastomer and lead free with ...

Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete. Fixed to steel...

Providing and fixing to existing door frames Glass Fibre Reinforced Plastic (FRP) panelled door shutter of required colour and approved brand and manufacture, made with fire - retardant grade unsatura...

Providing and fixing Fiber Glass Reinforced plastic (FRP) Door Frames of cross- section 90 mm x 45 mm having single rebate of 32 mm x 15 mm to receive shutter of 30 mm thickness. The laminate shall b...

Providing and fixing door latch with necessary screws etc complete. Oxidised mild steel door latch ---- With all Lead and Lift Loading and unloading as per the direction of engineer in charge

Providing and fixing ISI marked oxidised M.S. handles conforming to IS:4992 with necessary screws etc. complete : 125mm ---- With all Lead and Lift Loading and unloading as per the direction of engin...

Providing and laying Vitrified tiles in different sizes (thickness to be specified by manufacturer), with water absorption less than 0.08 % and conforming to I.S. 15622, of approved make, in all colou...

Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thickness to be specified by the manufacturer) of 1st quality conforming to IS : 15622 of approved make in colours such as White, Iv...

Providing skirting, dadooing, rises of steps with colour glazed tiles 6mm thick on 10mm thick cement plaster 1:3 and jointed with white cement slurry over existing rough plaster surface using glazed t...

Providing and laying flooring and steps fine machine polished granite stone slabs 20 mm thick on cement mortar bed 1:6, 20 mm thick, and joints finished with cement mortar 1:3 over existing cement con...

Providing and fixing stainless steel ( Grade 304) railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitt...

Providing and fixing of clay tiles for cladding tiles of size 230x75x10mm thick on 12mm thick cement mortar 1:3 (1 cement : 3 coarse sand) & jointed with Adhesive/cement slurry over rough plaster surf...

Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS: 13592 Type A, including jointing with seal ring conforming to IS: 5382, leaving 10 mm gap for thermal expan...

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe wi...

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe wi...

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe wi...

Providing and fixing brass bib cock of approved quality : 20 mm nominal bore. ---- With all Lead and Lift Loading and unloading as per the direction of engineer in charge

Providing and fixing brass stop cock of approved quality : 20 mm nominal bore. ---- With all Lead and Lift Loading and unloading as per the direction of engineer in charge

Providing and fixing ball valve (brass) of approved quality, High or low pressure, with plastic floats complete : 20 mm nominal bore. ---- With all Lead and Lift Loading and unloading as per the dire...

Providing and fixing Brass full way valve gate with C.I. wheel of approved quality (screwed end):25 mm nominal bore ---- With all Lead and Lift Loading and unloading as per the direction of engineer ...

Providing and fixing Brass full way valve gate with C.I. wheel of approved quality (screwed end):32 mm nominal bore ---- With all Lead and Lift Loading and unloading as per the direction of engineer ...

Providing and fixing Brass full way valve gate with C.I. wheel of approved quality (screwed end):50 mm nominal bore ---- With all Lead and Lift Loading and unloading as per the direction of engineer ...

Providing and fixing unplasticised PVC connection pipe with brass unions 45 cm length: 20 mm nominal bore. ---- With all Lead and Lift Loading and unloading as per the direction of engineer in charge

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with c...

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with cla...

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe ...

Providing and fixing Unplasticised Polyvinyl Chloride (uPVC) pipes, for cold water supply including all uPVC plain & brass threaded fittings . This includes jointing of pipes & fittings with one step...

Providing and fixing white vitreous china pedestal type water closet (European type) with seat and lid, 10 litre low level white vitreous china flushing cistern & C.P. flush bend with fittings & C.I...

Providing and fixing white vitreous china flat back or wall corner type lipped front urinal basin of 430x260x350 mm and 340x410x265 mm sizes respectively with automatic flushing cistern with standar...

Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the...

Providing and fixing mirror of superior glass (of approved quality) and of required shape and size with plastic moulded frame of approved make and shade with 6 mm thick hard board backing : Oval sha...

Providing and fixing PTMT towel rail complete with brackets fixed to wooden cleats with CP brass screws with concealed fittings arrangement of approved quality and colour. 600 mm long towel rail wit...

Providing and fixing PVC (S.W.R) Gully Trap 10cms x 10cms with all fitting arrangements & all necessary accessories complete. ---- With all Lead and Lift Loading and unloading as per the direction of...

Providing and fixing PVC (S.W.R) Nahani Trap 10cms x 10cms with all fitting arrangements & all necessary accessories complete. ---- With all Lead and Lift Loading and unloading as per the direction o...

Constructing brick masonry chamber of internal dimension 600x600mm and depth of 600mm (inner dimensions) with modular bricks of CD 75 in cement mortar 1:6, bed concrete 150mm thick with 1:3:6, plaster...

Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS: 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and o...

Providing, supplying to work site,Single Phase Submersible Pump Sets of 100mm dia (4 inch) suitable for bore well confirming to IS 8034-2000 specifications,with testing of as per instructions of engin...

Providing & fixing 455x610 mm cast iron cover with frame weight to be not less 38kgs (weight of cover 23 kgs and weight of frame 15 kgs)and necessary locking arrangements with M.S flats 32x6 mm etc & ...

Earth work excavation for pipelines/cables by Manual means upto 600 mm trench width, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights...

Providing, lowering, laying, jointing, testing and commissioning of Glazed Stone Ware Pipes of following dia, conforming to IS 651:1992, IS 4127 with latest amendments, including conveying to work sit...

Retaining wall (Inside) / oHT / UG sump Tanks Providing & Applying Crystalline waterproofing slurry coat RCC structure like Retaining wall, Underground tank. The material having chemical res...

Open Conduit SystemSupplying heavy gauge PVC conduit pipe ....... dia ....... mmthick confirming to IS 2509 with suitable size bends, junctionboxes, adhesive paste etc , and fixing using inverted wood...

Concealed Conduit System: Supplying heavy gauge PVC conduit pipe 25 mm dia 2mm thick confirming to IS 2509 with suitable size bends, metal/PVC Junction boxes, adhesive paste etc., and running before c...

Supplying heavy gauge PVC Conduit Pipe 19/20 dia 2 mm thick with suitable size bends, metal junction boxes adhesive paste etc., by groove cutting in the wall and fixing by bracing U or J hooks and cem...

Point wiring using Copper wire without switch.Supplying and wiring adopting loop system in existing PVCConduit /casing capping casing capping using 2x1.5Sqmm(Phase & Neutral) & 1x1.0 sqmm (Earth wire)...

Point wiring using Copper wire without switch.Supplying and wiring adopting loop system in existing PVCConduit /casing capping casing capping using 2x1.5Sqmm(Phase & Neutral) & 1x1.0 sqmm (Earth wire)...

Point wiring using Copper wire without switch.Supplying and wiring adopting loop system in existing PVC Conduit /casing capping casing capping using 2x1.5Sqmm(Phase & Neutral) & 1x1.0 sqmm (Earth wire...

Wire: Wiring for lighting/power circuit using one of FRLS PVCinsulated 1100V grade, multistrand copper wire with lowconductor resistance single core in open or concealedsystem of wiring with specified...

Wire: Wiring for lighting/power circuit using one of FRLS PVCinsulated 1100V grade, multistrand copper wire with lowconductor resistance single core in open or concealedsystem of wiring with specified...

Wire: Wiring for lighting/power circuit using one of FRLS PVCinsulated 1100V grade, multistrand copper wire with lowconductor resistance single core in open or concealedsystem of wiring with specified...

Wire: Wiring for lighting/power circuit using one of FRLS PVCinsulated 1100V grade, multistrand copper wire with lowconductor resistance single core in open or concealedsystem of wiring with specified...

GI modular box: Supplying and flush mounting powder coated/ galvanized metal box suitable for mounting modular switch plates.The box should be firmly flush mounted after due groove cutting in Brick/St...

GI modular box: Supplying and flush mounting powder coated/ galvanized metal box suitable for mounting modular switch plates.The box should be firmly flush mounted after due groove cutting in Brick/St...

GI modular box:Supplying and flush mounting powder coated/ galvanized metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in Brick/St...

GI modular box:Supplying and flush mounting powder coated/ galvanized metal box suitable for mounting modular switch plates.Thebox should befirmly flush mounted after due groove cutting in Brick/Stone...

GI modular box:Supplying and flush mounting powder coated/ galvanized metal box suitablefor mounting modular switch plates.Theboxshould be firmlyflush mounted after due groove cutting in Brick/Stone/C...

GI modular box:Supplying and flush mounting powder coated/ galvanized metal box suitable for mounting modular switchplates.Theboxshouldbefirmlyflush mounted after due groove cutting in Brick/Stone/C.C...

GI modular box: Supplyingand flushmountingpowdercoated/ galvanized metal box suitable for mounting modular switch plates.Theboxshouldbefirmlyflush mounted after due groove cutting in Brick/Stone/C.Cwa...

modular Switch Plate:Supplying and fixing superior quality modular switchmounting polycarbonate plate with necessary supportingback plate with required nos. of machine screws, bolts nutsetc., complete...

Modular Switch Plate: Supplying and fixing superior quality modular switchmounting polycarbonate plate with necessary supportingback plate with required nos. of machine screws, bolts nutsetc., complet...

Modular Switch Plate:Supplying and fixing superior quality modular switchmounting polycarbonate plate with necessary supportingback plate with required nos. of machine screws, bolts nutsetc., complete...

Modular Switch Plate:Supplying and fixing superior quality modular switchmounting polycarbonate plate with necessary supportingback plate with required nos. of machine screws, bolts nutsetc., complete...

Modular Switch Plate:Supplying and fixing superior quality modular switchmounting polycarbonate plate with necessary supportingback plate with required nos. of machine screws, bolts nutsetc., complete...

Modular Switch Plate: Supplying and fixing superior quality modular switchmounting polycarbonate plate with necessary supportingback plate with required nos. of machine screws, bolts nutsetc., complet...

Modular Switch Plate: Supplying and fixing superior quality modular switchmounting polycarbonate plate with necessary supportingback plate with required nos. of machine screws, bolts nutsetc., complet...

Modular switch:Supplying and fixing of modular switch & connectedaccessories on existing modular switch plate as per IS 3854and IS 1293.3.6.1)6Amps one way switch. ---- With all Lead and Lift Loading ...

Modular switch Supplying and fixing of modular switch & connectedaccessories on existing modular switch plate as per IS 3854and IS 1293.3.6.2)6Amps two way switch. ---- With all Lead and Lift Loading ...

Modular socket:Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 129 3.3.6.3) 6 Amps 3way socket. ---- With all Lead and Lift Loadin...

Modularswitch: Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854and IS 129 3.3.6.7) 16A One Way Switcht. ---- With all Lead and Lift Loadin...

Modular socket:Supplying and fixing of modular switch & connectedaccessories on existing modular switch plate as per IS 3854and IS 12933.6.10)6/16A Universal Socket. ---- With all Lead and Lift Loadin...

Ceiling Rose: Supplying and fixing/replacing of 6/16/32Amps electrical accessories on existing switch board. 3.14.5) 6 Amps Ceiling Rose. ---- With all Lead and Lift Loading and unloading as per the d...

Batten Holder: Supplying and fixing/replacing of 6/16/32Amps electrical accessories on existing switch board. 3.14.7) 6A Batten Holder ---- With all Lead and Lift Loading and unloading as per the dire...

LED Square Type Fitting: Supplying of recess mounting non integral type LED wluminaire comprising of pressure decast/extruded aluminium housing, with spring loaded false ceiling clamps, Power LEDs wi...

LED Tube Fitting : Supplying of feet - PVC Batten with integrated LED tube W with high quality diffuser with Life of 25000 burning hours & 70% lumen maintenance with CRI 80. PowerInput: 220-240V @ 5...

LED Fitting fixing Charges:Fixing all types and all capacities of fluorescent / false ceiling / spot light / CFL / LED fittings indoor on the wall / ceiling /rafters / girders using 23/0.0076” twin...

Supplying of Ceiling Fanwith Capacitorrating As per guideline of BEE5 starrating and IS:374/19 and also comply with IS:1709/1984 with latest amendment, Rated voltage 220V/50Hz, Rated powerup to 35 W +...

Fixing a ceiling /wall mounting fan of all capacities and all types, with necessary clA and 'S' hook made out of 15mm dia MS rod, with 5 A. ceiling rose of approved quality with necessary length of 23...

Supplying And Fixing Metal Fan Box with Round Hook. ---- With all Lead and Lift Loading and unloading as per the direction of engineer in charge

Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854and IS 1293. 3.6.4)Stepped Fan Regulator Two Module ---- With all Lead and Lift Loading an...

Supplying of 1440rpm heavy duty exhaust fan with bracket blades suitable to operate on 230V 50Hz, AC Supply complete. 48" Sweep(1200mm6.2.1) 12" Sweep (300mm) ---- With all Lead and Lift Loading and u...

Fixing one exhaust fan after making a suitable notch in the wall and finishing with cement mortar and colouring to match the existing wall or brackets, with bolts and nuts and a 5 A, ceiling rose with...

LEDLamps Supplying & fixing of retrofit type LED bulb W with OPAL acrylicdiffuser comprising of LED source with CCT 6500 degree K, CRI 70%.efficacy 80 lumen per W, life 25000 burning hours and Complia...

MCB Switches:Supplying and fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' Type curve, indicator ON/OFF, energy cross-3 with Short circui...

MCB Switches:Supplying and fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' Type curve, indicator ON/OFF, energy cross-3 with Short circui...

RCCB Switches: Supplying,fixingandwiringResidualcurrentcircuitbreaker(RCCB)240/450V upto 300mA sensitivity on existing wood/ panel board.5.20.1)16A-25A 2 pole ---- With all Lead and Lift Loading and u...

RCCB Switches.: Supplying, fixing and wiring Residual current circuitbreaker (RCCB) 240/450 V upto 300mA sensitivity on existing wood/ panel board. 5.20.6) 16A-25A 4 pole ---- With all Lead and Lift L...

MCB distribution boards : Supplying and fixing regular MCB distribution boards on wall/ wood board / flush mounting using required clamps bolts,nuts etc., with provision for fixing suitable type capac...

Earthing : Supplying, fixing, wiring, earth electrode for grounding conduits, I.C.cutouts and other equipment's on the meter board using 40 mm dia2.90 mm thick GI pipe 2.5m long buried in a pit . The ...

Guy Wire & GI Wire as per IS-2141 8.02) 8 SWG GI Wire (4.064 mm Dia), Std Wt: 131 Kg/KM ESCOMs ---- With all Lead and Lift Loading and unloading as per the direction of engineer in charge

MS box Fabricating supplying and mounting MS box made out … SWG suitable for floor / wall mounting, fully weather proof with provision for better heat dissipation, provided with hinged front cover,...

Supplying and fixing angle iron frame work fabricated out of M.S. angle iron.. and M.S. flat … with bolts, washers etc., and painted with 2 coats of red oxide and then two coats of approved paint. 5...

1.1 kV, XLPE or Heat resistant PVCinsulated, PVC exutruted Inner SeathArmoured LTUG Cable as per IS-1554 (Part 1) or IS-7098 Part-1, Armouring stripthickness and resistivity as per IS-39753 2.05) 1.1 ...

Laying of cable in Existing Trench/GI pipe/Stone Ware/RCC Hume pipe using Wooden/Aluminum Rollers as directed by the departmental staff. LT Cable 2.5 to 25 Sqmm ---- With all Lead and Lift Loading and...

Epoxy Terminating Kit (Pothead) suitable for 1.1 kV, LTUG Cable ---- With all Lead and Lift Loading and unloading as per the direction of engineer in charge

Supplying and fixing of LED type panel board indicating lamp with required colour suitable for 230/440VAC. 50 Hz 12/24V D.C. 5.38) ---- With all Lead and Lift Loading and unloading as per the directio...

Aluminium End Terminal (Lug)60.01)10 Sqmm ---- With all Lead and Lift Loading and unloading as per the direction of engineer in charge

Brass Cable Gland 63.01)25 mm ---- With all Lead and Lift Loading and unloading as per the direction of engineer in charge

Supplying & fixing of Porcelain fuse channel with cut out on existing wooden/panel using necessary nuts, bolts and washers.5.7.1)16A ---- With all Lead and Lift Loading and unloading as per the dire...

Supplying, fixing and wiring Electronic Trivector Meter (ETV) 5 to20A single phase Class-1 Accuracy with Temper Proof EnergyMeter ---- With all Lead and Lift Loading and unloading as per the direction...

Supply and fixing polished wood board made of not less than 15mm thick plank on both sides of not more than 2 pieces and fixing the same to the wall using tapered inverted wooden plugs screws.15" x 12...

Earth work excavation for pipelines/cables by Manual means upto 600 mm trench width, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights...

PVC Pipe 40mm Dia 2.5mm thick ---- With all Lead and Lift Loading and unloading as per the direction of engineer in charge

GI Pipe: Supply, Installation testing and commissioning of approved make heavy tubes (Class 'C') confirming to as per IS1239 Part- I (25mm Nominal bore 4.05mm thick@ 2.97 Kg/m, 32mm Nominal bore 4.05m...

Supplyingandfixinghylumplasticsheet3mmthickwithnecessarynitchesforfixingswitches,regulatorsetc.,andfixingonexistingwood or metal box using N. F. screws. ---- With all Lead and Lift Loading and unloadi...