PERIODICAL SERVICES TO MD ACCN JCOS OR S, OFFICER MESS SINGLE OFFRS OFFRS MD ACCN BOUNDARY WALLS IN ZONE A UNDER AGE BR I UNDER GE N BIKANER AT MIL STN BIKANER

Amount

M&L for preparing old decorated surfaces plastered/unplastered by brooming down etc and applying one coat of white wash on walls including cornices, pilasters etc complete all as specified and as directed.

M&L for prerparing old decorated surfaces plastered/unplastered by brooming down etc and applying one coat of white wash on ceiling complete all as specified.

M&L for preparing old decorated surfaces plastered or unplastered by brooming down etc and applying one coat of colour wash on walls including cornices pilasters etc complete all specified and as directed.

M&L for preparation of old decorated surface of wall including cornice, pilasters etc by brooming down, steel wire brushing, scaping sown smoke soot, moulds moss and efflorescent salts and treating oil and greasy spots removing nails and filling small holes by putty and rubbing srface by sand paper to prepare the surface and applying and appyling one coat of distemper oil emulsion white or tinted complete all as per specified and directed by Engr-in-Charge.

M&L for complete removal of existing treatment of wall including cornices, pilasters etc by brooming down, steel wire brushing, scaping down smoke soot, moulds, moss and efforescents salts and treating oild and grasy spots removing nails and filling small holes by putty and rubbing surface by sand paper to prepare the surface and appying two coat of distemper oil emulsion white or tined complete all as per specified and directed by Engr-in-Charge

M&L for preparing old decorated surfaces treated with cement base paint of walls cornices pilaster etc and applying one coat of cement base paint (Ist quality) in plain pattern on walls complete all as specified.

M&L for complete removal of existing treatment of wall including cornices, pilasters etc by brooming down, steel wire brushing, scaping down smoke soot, moulds, moss and efforescents salts and treating oil and grasy spots removing nails and filling small holes by putty and rubbing surface by sand paper to prepare the surface and applying two coat of cement based paint white or tinted complete all as specified and as directed by Engr-in-Charge

M&L for painting to old wood or wood based surfaces of any description not otherwise described over 10cm width or girth including preparation of surfaces finishing with one coat of synthetic enamel paint complete all as specified and as directed by Engr-in-Charge

M&L for painting to old steel or steel based surfaces of any description not otherwise described over 10cm width or girth including preparation of surfaces finishing with one coat of synthetic enamel paint complete all as specifed and as directed by Engr-in-charge

Hacking out old broken glass (any thickness, size, quality or description) panes from metal frames fixed with oil putty including punching or drilling out glazing pins/broken spring clips including cleaning etc.

S&F 3mm thick glass sheet any size oridinary qlty in steel or wooden frames complete with fixing materials such as putty glazing pins wooden beads etc.(Note: No payment shall made to cont if glass fitted with out glazing pin.)

Ditto all as per item No 11 above but pin head glass complete all as specified and as directed by Engr-in-Charge

Taking down cement plaster on bricks or stone walls including raking out joints hacking for key scrubbing down with water complete all as specified and as directed by Engr-in-Charge

M&L for 15mm thick rendering on other than fair faces of brick works finished even and smooth without using extra cement in cement mortar 1:4. (Note: Plaster shall be carried out in patches and contractor shall have no claim for any height and scaffolding what so ever is the location)

M&L for 10mm thck rendering on fair faces of brick works in cement mortar 1:6 finished even and smooth without using extra cement in cement mortar.(Note: Plaster shall be carried out in patches and contractor shall have no claim for any height and scaffolding what so ever is the location)

M&L for 5mm thick in cement and sand mortar 1:3 on cement concrete surfaces as on ceiling including finishing the surface even and smooth without using extra cement complete all all as specified and as directed by Engineer in Charge.

M&L for 15mm thick rough cast plaster in cement mortar 1:4 consists of crushed stone or fine gravel aggregate (which is generally of size between 6 to 12 mm depending on the texture required) mixed with 6 to 12 mm depending on the ration 1:1:1 complete all as specified and as directed by Engr-in-charge. Note : The rate quoted shall be deemed to include for necessary use and waste opf form work if required and nothing extra shall be paid on this account.

M&L for preparation of newly plastered surfaces of wall indluding cornices, pilasters etc and applying two coats of cement based paint of approved tint or color complete all as specified and as directed by Engr-in-charge.

M&L for preparing new decorated surfaces plastered/unplastered by brooming down etc and applying two coat of white wash on walls including cornices pilasters etc complete all as specified.

M&L for preparing new decorated surfaces plastered/unplastered by brooming down etc and applying two coat of distemper oil emulsion on walls inner site including cornices pilasters etc complete all as specified.

M&L for preparing new decorated surfaces plastered/unplastered by brooming down etc and applying two coat of white wash on ceiling complete all as specified.

M&L for preparation of old painted surfaces of bricks,stone, concrete, asbestos sheet of any description over 10 cm width or girth not otherwise discribed and applying a coat of synthetic enemel paint as in exterior or interior wall surface complete all as specified and as directed .

M&L for preparing old surfaces of wall and applying one coats of plastic emulsion paint complete all as specified and as directed by Engr-in-Charge.

M&L for writing letters or figures (Block Roman, Itaic or Indian) n'exc 30cm high complete all as specified and as directed .

M&L for applying a coat of Birla wall care putty cement based on new or old surfaces of wall complete all as specified and as directed by Engr-in-Charge

M&L for complete removal of existing treatment of walls/ceilings incl pillars etc by mechanical equipment like electric wall sander and applying two coats of exterior emulsion/weather proof paint/coat using rollers/sprayer over a coat of exterior wall primer incl a layer of wall exterior grade wall care putty (make as approved by GE, as \ per manufacturer instructions ) after preparing/cleaning of wall from dirt, chalk, dust and particles of previous paint etc complete all as specified and as directed by Engir-in-Charge. New work (Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm)specified and as directed.

M&L for preparation of newly plastered surface of walls/ceilings incl pillars etc. and applying two coats of exterior emulsion/weather proof paint/coat using rollers/sprayer over a coat of exterior wall primer incl a layer of wall care putty (As per manufacturer instructions or as directed by GE) after preparing/cleaning of wall from dirt, chalk, dust etc complete all as specified and as directed by Engr-in-Charge.

M& for inner layer plaster of paris (POP) incl hacking out old wall plastered surface shall be duly floatted prepare with sand paper and finally apply the cement based primer on finish surface complete all as specified and as directed by Engr-in-Charge (Note : Final surface shall be smooth up to max depression of 2mm thickness thin shall be no extra costly to the Goverment exchepuer if thickness of layer of POP increase in order to give smooth surface.

Removing up rooting vegitation growth building roof top / sides of walls exc 30cm girth incl and stacking or serviceable material and disposal of unserveaceable material to distance nexc 50cm and clearing site and making food of the disturbed surfaces in brick work cm 1:4 and plaster in 1:4 surface area nexc 0.5 sqm complete all as specified and as directed by Engr-in-charge (Note : For removal of vegetation if reqd at site rain water pipes bends to be removed preserved and refixed in the same location_)

M&L for providing and injecting chemical emulsion for Post constructional Antitermite Treatment along external wall where the apron is not provided using chemical emulsion at the rate of 7.50 ltr per sqm of the vertical surface of the sub structure to a depth of 300 mm including excavated channel along the wall and rodding etc complete. (Note: The treatment work shall be carried through authorised agencey only , and certificate for the same for warranty shall have to frunished before submitting payment)

M&L for providing and injecting Along the external wall below concrete or masonry apron using Antitermite Treatment chemical emulsion @ 2.25 litres per linear metre including drilling and plugging holes etc. in apron.(Note: The treatment work shall be carried through authorised agencey only , and certificate for the same for warranty shall have to frunished before submitting payment)

M&L for providing and injecting Treatment of soil under existing floors using emulsion @ one litre per litre per hole, 300mm apart including drilling and plugging 12mm dia holes with cement mortar 1:2 (1 cement :2 coarse sand) to match the existing floors .(Note: The treatment work shall be carried through authorised agencey only , and certificate for the same for warranty shall have to frunished before submitting payment)

M&L for providing and injecting Of voids in masonry using chemical emulsion one litre per hole, at 300mm intervals including drilling holes.(Note: The treatment work shall be carried through authorised agencey only , and certificate for the same for warranty shall have to frunished before submitting payment) . and drilling holes at45 degree and plugging the same with cement mortar 1:2 to match with existing surface.

M&L for providing at points of contact of wood work by chemical emulsion (in oil or kerosene based solution) @ 0.5 litre/hole by drilling 6mm dia holes at a downward angle of 45 degree at 150 mm centre to centre and sealing the same .(Note: The treatment work shall be carried through authorised agencey only , and certificate for the same for warranty shall have to frunished before submitting payment)

m/s gaurav enterprises

m/s gharu constrution company

KAMLA CONSTRUCTION COMPANY

A.S. CONSTRUCTION COMPANY

M/s Sharafat Farook

M S GROUP