Repair to runway taxi track and helipad incl maint of shoulder and side drain at manasbal under GE 970 EWS

Amount

M&L racking out old sealing compound from the old existing joints of size 26 to 30mm wide and 28mm deep(average) without disturbing the joint filler underneath including cleaning the joints portion throughly to ensure dust free using compressed air by air blower, and filling the existing joints with sealing compound grade 'B' after applying a coat of primer to vertical surfaces of concrete which are in the contact with the compound and finishing the joint properly leaving 3 mm gap from top surface of concrete complete all as specified and as directed.

All as per item No 01 above but size of joint is 21 to 25 mm wide and 20 mm average depth complete all as specified and as directed.

All as per item No 01 above but size of joint is 16 to 20 mm wide and 15 mm average depth complete all as specified and as directed.

Repairs to broken spalled edges of joints, pot holes etc of existing concrete slab by forming square/rectangular grooves with diamond/Mech cutter wider towards bottom to from key with the existing quality concrete cleaning / dusting the grooves using compressed air to remove all dust and dirt by air blower and repairing with epoxy mortar after applying epoxy primer and applying one coat of Epoxy resin (Base & Hardner, Ratio 2:1) over epoxy mortar, finished all as per manufacturer's instructions and as directed.

M&L for cleaning the surface of Runway with wire brush and air compressor, making the surface free from dust and applying with and including two coats of polymer modified bitumen emulsion @ 0.50 Ltr/Sqm diluted in the ratio 1:1 (PME 0.25 litre and Water 0.25 litre in each coat) by spraying with mechanical sprayer complete and ensure uniform finish of runway complete all as specified and directed as per manufacture instruction complete all as specified and directed. Make:- M/S Hindustan coals Pvt Ltd (Product Name : HINMAT PLUS) or equivalent MES approved make as approved by GE. Note:- (a) Contracter must ensure and arrange necessary material to protect the painting lines, Runway lights on the Runway from the PME. If any damage occurs during currency of work contractor shall rectify the same at his own cost and arrangement.

M&L for preparing bituminous surfaces of road and marking paint of approved colour confirming to BS 3262-1989 pattern of specified broken/continous strip 2.5mm thick centre lines, stop lines, dashes, arrows etc. and the like of any width on top surfaces of runway including cleaning/removing of existing paint strip from the runway surface make free from dust & moisture and putting in glass beads of standard size by special applicator machine all as per manufacturer's instructions, applied hot upto 200 to 220 degree centrigade tempreature with special applicator machine complete all as specified and directed.

Notes :- An amount of Rs. 0.00 on account of Credit Schedule for Schedule 'A' Part-II shall be deducted from total quoted amount of BOQ to arrive at the contract sum.

M/s PARVAZ CONSTRUCTION COMPANY (BID ID -3337488)

M/s Nasir Rasool Dar (BID ID -3345932)