Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Tender Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Status |
|---|---|---|
| 1 | Admitted-Fee/PreQual/Technical/Finance | Admitted-Fee/PreQual/Technical/Finance |
Tender Value
₹25.0 L
EMD Value
₹24,960
Closing Date
10 Jun 2024, 3:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
KANGEYAM MUNICIPALITY
KANGEYAM MUNICIPALITY
Construction Of Community Toilet at Market in Kangeyam Municipality
2024_MAWS_449171_1
0266-02/2024/E1
Open Tender
Civil Works
Works
150 days
KANGEYAM MUNICIPAL AREAS
Please refer Tender documents.
2 documents required · 2 mandatory
₹0
₹24,960
KANGEYAM MUNICIPALITY
10 Jun 2024
15 Mar 2024
10 Jun 2024
15 Mar 2024
10 Jun 2024
15 Mar 2024
15 May 2024
Amount
Earthwork open excavation in all soils and sub soils and to full depth as may be directed except in rock requiring blasting but inclusive of shoring, strutting and baling out water wherever necessary and depositing the excavated earth within the compound in places shown by departmental officers with an initial lead of 10m and lift of 2m and clearing and leveling etc. complete complying with standard specification.
FOOTING
PLINTH BEAM
Supplying and filling in foundation and basement with filling Crushed Stone Sand in layers of not more than 15cm.thick well rammed watered and compacted -1m3 etc., complete complying with standard specification.
Cement concrete 1:4:8 mix (One cement four Crushed Stone Sand and eight aggregate) using 40 mm ISS metal including mixing, laying, consolidating curring cost and conveyance of all materials to site and all labour charges etc., complete as per standard speicification
Supplying and erecting steel centering including necessary supports for plane surfaces in foundation and basement for reinforced cement concrete works such as column footings, plinth beam, grade beam, stair case steps, bed blocks etc. which require only normal strutting using M.S. sheets of size 90cm x60cm BG 10 gauge of stiffened with mild steel angles of size 25mm x 25mm x 3mm for boarding laid over silver oak joists of size 10 x 6.50cm spaced at about 90 cm centre to centre and supported by the casurina props of 10cm to 13cm dia spaced at 75cm centre to centre at suitable intervals etc. complying with standard specification. (The payment for centering shall be made only after the concrete is laid. The retrieved materials should be taken back by the contractor)
Supplying and erecting, centering for sides and soffits including supports and strutting upto 3.29m height for plane surfaces as detailed below in all floors with all cross bracings using mild steel sheet of 90cm x60cm BG 10 gauge stiffened with welded M.S. angle of 25 x 25 x 3mm for boarding laid over silver oak joists of size 10cm x 6.50 cm spaced at about 90 cm centre to centre and supported by casurina props of 10 cm to 13 cm dia spaced at not less than 75 cm centre to centre or at suitable intervals etc. complete in all floors complying with standard specification. (The payment for centering shall be made only after the concrete is laid. The retrieved materials should be taken back by the contractor)Plane surfaces such as RCC floor slab, roof slab, rectangular square Tee or Ell beam, lintels, bed blocks staircase waist slab, landing slab, landing beams, portico beams, portico slab, etc.
Plane surfaces such as RCC floor slab, roof slab, rectangular square Tee or Ell beam, lintels, bed blocks staircase waist slab, landing slab, landing beams, portico beams, portico slab, etc.
For Plane surface such as RCC square or rectangular columns, top and bottom slab of sunshade, boxing sill slabs etc.,
Providing and laying in position ,standardised concrete mix M-20 Grade in accordance with IS 456-2000,using 20mm and down graded hard broken granite stone jelly for all RCC items of works with minimum cement concrete of 325kg/M3 and maximum water cement ratio of 0.55, including admixture (plasticiser/super plasticiser) in recommended proportions as per IS :9103 to accelerate ,retard setting of concrete , improve workability without perparing strength and durability with about ( 5 cu.m) 7730 kg of 20mm machine crused stone jelly and with about (3.30cu.m) 5156 kg of 10-12mm machine crused stone jelly and with about (4.79cu.m) 7670kg of Crushed Stone Sand, but excluding cost of reinforcement grill and fabricating charges , centering and shuttereing and also including laying , vibrating with machanical vibrators ,finishing curing etc., and providing fixtures like fan clamps in the RCC floor/roof slabs wherever necessary without claiming etc., complete complying with standard specifications and as directed by the departmental officers. The coarse and fine aggregates to be used should be comply with the requirments of IS standards.( No separate payment will be made by the department for the excess usage of materials).charges
Upto Basement
Ground Floor
Supplying and fabrication placing in position of M.S. (or) RTS rods for required size and length as directed by the deparmental officers approved design including bending cutting tying and cost of binding wire cost and conveyance of all materials to site etc., complete as per standard specification
Brick work in cement mortar 1:5 mix using (One cement and five crushed stone sand) using best quality of Fly ash bricks of size (230 x 110 x 75 cm) for foundation including curing cost and conveyance of all materials to site and all labour charges etc., complete as eper standard specification
Upto Basment
Ground Floor
Supplying and filling in foundation and basement with filling gravel in layers of not more than 15cm.thick well rammed watered and compacted -1m3 etc., complete complying with standard specification.
Brick partition wall 11.50 cm thick in cement mortar 1:3 mix (One cement and three crushed stone sand) mix using (9"x4 3/8"x2 3/4") cm best Fly ash bricks including cost and conveyance of all materials and labour cost and etc., complete as per standard specification
Plastering with cement mortar 1:5 mix (One cement and five Crushed Stone Sand ) to 12 mm thick including curing cost and conveyance of all materials to site and all labour charges etc., complete as per standard specification
Plastering with cement mortar 1:3 mix (One cement and three Crushed Stone Sand) to 10 mm thick including curing cost and conveyance of all materials to site and all labour charges etc., complete as per standard specification
White washing two coats with well burnt shell time blue gum etc., complete as per standard specification
Painting two coats with approved quality of (snocem)cement paint over the plastered surface including curing cost and conveyance of all materials to site and all labour charged etc., complete as per standard specification
Paving the floor with palin/design Antiskirt ceramic tiles (colour and shade as directed) of size 305 mm x 305mm x 6 mm in all floors over a base layer of cement mortar 1:3 (one cement and three Crushed Stone Sand ) 20mm thick laid in-situ and pointed with same coloured cement
Floor finishing with granolythic flooring in 20 mm thick cement concrete 1:2:4 mix using 10 to 12 mm size metal jelly including mixing laying, finishing, curing cost and conveyance of all materials to site and all labour charges etc., complete as per standard specification
Dadooing walls with glazed tiles (colour) of size 305 x 200 x 6 mm laid in cement mortar 1:2 mix to 10 mm thick and painting with white cement using 0.40 kg / 1 M 2 including finishing the jointing and painting with tiles surface including and labour charges cost and conveyance of all materials to site etc., complete as per standard specification
Supplying and fixing 30mm thick solid core PVC door shutter with PVC frame (Confirming to IS 4020 with updated amendments) consisting of frame made out of MS tubes 19 gauge thickness and size of 19 x 19mm for styles and 15x15mm for top and bottom rails. M.S. frame shall be covered with 5mm thick heat moulded PVC ‘C' channel of size 30 x 50mm forming styles, and 5mm thick 75mm wide PVC sheets for top rail, lock rail and bottom rail on either side and 10mm (5mm x 2) thick 20mm wide cross PVC sheet as gap insert for top rail, bottom rail. Paneling of 5mm thick PVC sheet bearing on either side and join together other side etc. An additional 5mm thick PVC strip of 20mm width is to be stack and the interior side of the ‘C' channel using PVC sealant adhesive complete, as per direction of Engineer in charge and drawing.
Pre-Painted Galvanized Iron Fixed Louvered Ventilators with Glass and Grill: Providing and fixing louvered ventilator fabricated from roll formed sections made of galvanized steel colour coated / powder coated (Base steel as per IS 513 'D' quality, galvanized as per IS 277 with zinc of 120 grams / sqm.) with total coated thickness of 0.58mm. Paint specification: Coated sections should be with primer coat of epoxy primer of 5-7 microns thick, finish painted with a polyester paint of 12-16 microns thick and back coated with alkyd backer of 5-7 microns. Dimensions of sections: The section for external frame should be of 57mm x 33mm. Fixing details: The section should be cut to length, joined with profile to profile component. Accessories: Glass holding flanges made of glass filled nylon. Glass: Louvers should be provided with 4mm pinhead glass. Grill: Ventilator should be provided with grill made of 10mm Square MS bars to 12mm x 5mm flat at 4" intervals. Total grill unit should be powder coated and fixed to ventilator frame with screws. The above frames should be fixed to brick / concrete masonry walls and floor by means of self-expanding screws. PWD SOR P NO 62
Manufacturing, Supplying and Fixing of Stainless Steel Hand rails for staircase using 50mm dia 304L Grade Stainless Steel pipe of 1.60mm thick at required locations to a height of 900mm from finished floor level welded to 38mm dia Stainless Steel pipe post of 1.00mm thick as vertical at 900mm centre with 2 Nos. of 25mm dia intermediate horizontal stainless steel pipe of 1.60mm thick in between. The vertical pipe has to be welded to the 100 X 100 X 6mm MS base plate encased in the base concrete. The rate is inclusive of the charges for cutting, bending, welding, grinding, polishing, conveyance, electrical charges, etc. complete PWD SOR P NO 57
Stainless Steel (Salem Stainless Steel) Door Frame (Box Section using Stainless Steel Plate of 1.6mm thick) of size 100mm x 60mm with a rebate of 30 / 35mm x 15mm on one side of the frame including supplying and fixing dovetail splayed end stainless steel hold fast etc PWD SOR P NO 44
Supplying & fixing door shutters for Mediun Density Fiber Board of exterior grade 35 mm thick,singIe leaf conforming to IS:12406/1989 with 35x12 mm T.W.Lipping on all edges with necessary adhesives and CP screws complying with standard specifications. The rate is inclusive of threee coats of best quality varnish but excluding cost of furniture fittings. such as 300 mm tower bolt 2nos,200mm towerbolt I no. 300mm Aldrop 1 No. Alu handle ornamental type 2 Nos,and 1 No. Door stopper etc complete
Supply - P.V.C. Pipes (10Kg/SqCm) Supplying laying and jointing P.V.C pipes (10Kg/SqCm) of approved quality and best variety conforming to I.S.S & with I.S.I mark, of the following sizes including cutting , Fixing to PVC specials using Adhesive but excluding cost of such specials and fixing to wall with necessary teak - Wood Plugs,PVC Clamps and screws,making holes on the wall or drilling holes in roof and making good the dismantled portions to original condition with necessary brick work and plastering wherever necessary with necessary scaffolding charges.
110mm dia pipe
90mm dia pipe
Supply and delivery and fixing of HDPE tank as per IS 12701 / 1996 including loading, unloading, transportation and labour charges for fixing of the GI pipes and specials for pipe connection works including cutting, threading and fixing charges etc., 1000 litres capacity
Supplying and fixing in position first quality and approved variety of Gun metal Gate Valve / Whee Valve with BIS make of the following dia including cost of shellac, thread balls, etc., complete complying with standard specifications (for both internal and external water supply arrangements). The valves to be used on work shall be got approved by the Executive Engineer before use on work.
25mm Gun metal Gate Valve
32mm Gun metal Gate Valve
Supplying and fixing 15 mm diamete Brass chromium plated heavy type screw down tap of approved make conforming to ISI specification and quality and including cost of cotton thread, white etc., complying with standard specification (Screw down taps are to be got approved by the Executive Engineer before use on work)
SD Tap
Pillar Tap
Supply - P.V.C. Pipes (10Kg/SqCm) Supplying laying and jointing P.V.C pipes (10Kg/SqCm) of approved quality and best variety conforming to I.S.S & with I.S.I mark, of the following sizes including cutting , Fixing to PVC specials using Adhesive but excluding cost of such specials and fixing to wall with necessary teak - Wood Plugs,PVC Clamps and screws,making holes on the wall or drilling holes in roof and making good the dismantled portions to original condition with necessary brick work and plastering wherever necessary with necessary scaffolding charges.
25mm dia
32mm dia
Supply - P.V.C. Pipes (10Kg/SqCm) Supplying laying and jointing P.V.C pipes (10Kg/SqCm) of approved quality and best variety conforming to I.S.S & with I.S.I mark, of the following sizes including cutting , Fixing to PVC specials using Adhesive but excluding cost of such specials and fixing to wall with necessary teak - Wood Plugs,PVC Clamps and screws,making holes on the wall or drilling holes in roof and making good the dismantled portions to original condition with necessary brick work and plastering wherever necessary with necessary scaffolding charges.
32mm dia
Supplying PVC Specials (with working pressure 1t kg. / sq.cm.) in water supply arrangements (both ir internal and external water supply arrangements
Coupler
25 mm Dia
32 mm Dia
Elbow
25 mm Dia
32 mm Dia
25 mm Dia
32 mm Dia
25 mm Dia
32 mm Dia
End Cap
25 mm Dia
32 mm Dia
Reducer
20 mm x 15 mm
25 mm x 20 mm
32 mm x 25 mm
Reducer Tee
20 mm x 15 mm
25 mm x 20 mm
32 mm x 25 mm
Reducer Elbow
20 mm x 15 mm
25 mm x 20 mm
32 mm x 25 mm
Jet Nipple
25 mm Dia
32 mm Dia
Supplying and fixing in position PVC specials of the following dia and types of approved quality confirming to BIS and providing leak proof joints including fixing to the walls and giving connection to the PVC soi stacks, dismantling the masonry or RCC works and re doing the dismantled portion to original condition etc. complete complying with standard specifications. (The PVC specials should be got approved by the Executive Engineer before use on works).
PVC Elbow
110mm dia
75mm dia
PVC Elbow with Door
110mm dia
75mm dia
PVC Tee
110mm dia
75mm dia
PVC Tee with Single Door
110mm dia
75mm dia
PVC "Y" with Single Door
110mm dia
90mm dia
Supplying and fixing in position best quality approved make colour glazed earthenware wash hand basin of size 550 X 400 mm with a pair of cast iron brackets, including cost of 15mm diametre brass chromium plated piller tape,32 mm diametre C.P. Waste union, 32 mm diametre P.V.C. waste pipe with rubber plug and chain, 15mm diametre G.M.wheel valve, 15mm dia brass nipple, 15mm dia nylon connections etc., including fixing the wash hand basin in the wall in position with a pair of C.I. brackets with teak wood plugs and screws and giving necessary water supply connection and paintiung the brackets with two coats of paint over a primimg coat of anticorrosive paint including testing for leackage etc., complete complying with standard specifications
Supplying and fixing in position 15mm dia C.P.Shower rose & stop cock of approved make confirming to IS specifications and quality including cost of Shellac thread etc. complying with standard specification.
Brass C.P. Shower Rose
C.P Stop Cock
Supplying and fixing best approved quality Brass C.P Towel rail 600mm. long and 20mm Diameter with brackets of same material including cost of Teak-Wood plugs and C.P.Screws etc., complete complying with standard specifications
Supplying and fixing best approved quality C.P.Soap Tray of size 150mm X 100mm including cost of Teak Woodplugs, brass screws complete complying with standard specifications.
Supplying and fixing in position indian make bewelled edge mirror of approved quality and brand of size 600 X 450mm wth necessary plastic back, PVC frame with bottom stand of approved colour with brass screws,rawal plugs etc., complete complying with standard specifications.
Supplying and fixing in position of India make while glazed earthen water closet of size 58x 44cm (21")Orissa pan type with 'P' or 'S' trap and with Crushed Stone Sand cushion etc., complete with necessary connection
Supplying and fixing in position colour Glazed European Water Closet of best quality and approved make with 100mm 'P' os 'S'' trap with Double flapped rigit P.V.C. seat cover with C.P. brass hinges with 12.5 litres PVC Low Level Flushing Tank with all internal fittings etc., complete complying with standard spoecifications,labor inclusive of fixing lowlevel flushing tank.
Supplying and fixing in position of Indian mark glazed earthenware lipped mouth compact lock lipped urinal with 32 mm bell mouth, PVC canded waste pipe, 12 mm PVC lead and brass connectiions 12 mm GM metal wheel valve and fixing the urinal in position with teack wood plyg clamps, screws, white lead etc., including dismantling necessary and the same to the original connections
Supplying and fixing position Cl Nahani Trap / Floor Trap of the following sizes with best stainless stee gratings of approved brand and quality, fixed over a bed of brick jelly lime concrete 1:2:5 (One part of lime two part of Sand and five part of 40mm gauge brick jelly) and finished with Cement Mortar 1:3 (One Cement, Three Sand ) including dismantling masonry works wherever found necessary and making good the dismantled portions to the original condition and giving connection to the CI / PVC pipes, etc. complete complying with standard specification. (The Nahani Trap should be got approved by the Executive Engineer before use on works)
Providing & fixing PVC RAIN WATER DOWNFALL PIPE of the following dia with necessary T.W.Clamps Plugs, Shoes,Bemds, other clamps, screws nails etc.,complete complying with standard specification. The rate is inclusive of cost of removable iron gratings of appropriate size. The size of Teak Wood plugs used is 150X25mm in front & 200x75mm in rear (wall side) with a depth of 110mm. The pipe is to be fixed by means of "U" clamps at the centre of pipes to be fixed.160mm dia PVC Pipe [4 Kg/SqCm]
Providing rain water harvesting using 3 No.of RCC well rings of 90cm inner dia (clear) with Scm wal thickness made out of cement concrete 1:2:4 using 20mm hard broken jelly to a height of 30cm each supplying and fabricating 16 No. of 6mm dia MS rod vertically and 3 No. of 6mm dia MS rod circumfereritially tied together with 18 guage binding wire for well rings including necessary earth work excavation 1m dia to a depth of 1m, supplying and filling 40mm HBG inside the erected well ring to a depth of 90cm, and top covered with RCC circular perforated cover slab of 1m dia and Scm thick which inclusive of cost and fabrication of 6mm M.S reinforcement at 15 cm spacings on both directions and one 6mm M.S rod ties at the edge of the slab circumferentially including cost of moulding, curing finishing and well placing in position and disposing off excavated earth with all initial leads and lifts in places as shown by the Departmental officers etc., complete in all respects.
Earthing as per the ISI specification with an earth electrode of 2.10 metre Class 'B' GI pipe of dia not less than 40mm with copper earth plate of size 125mm x 50mm x 6mm with necessary funneling arrangements with necessary masonry work and with 38mm RCC cover slab for the brick masonry (SD 233)
Supply and run of 2 of No.8 SWG GI wire for guarding with cradle with No.8 SWG GI wire at the equal interval of 1.5 metre.(SD 75)
Supplying and Fixing of 3 Phase DB with MCB 12 way TPMCB sheet steel distribution boards (flush type/surface type) fitted with bus bars and neutra links with three phase MCB outgoings and separate 4 way provision for accommodating One No. 4 pile incoming MCB / lsolator and another separate 4 way provision for accommodating One No. 4 pole ELCB / RCD (totally 8 ways in one segment) (3 x 4 ways in each segment) and separate provisions for MCB / Isolator (totally 12 Nos.) for sub incomers in 3 segments with label holder etc.complete in al respects as directed by the departmental officers Electrical SOR SI.No.16 (3a)
Supply and run of 2 of 1.5 sq.mm. (22 / 0.3) PVC insulated single core unsheathed copper conductor of 1100V grade in rigid pipe concealed in wall and ceiling with continuous earth wire connection of 14 SWG TC wire and making good of the concealed portion with suitable colour (derived from SD 55)
Supply and run of 2 of 1.5 sq.mm. (22 / 0.3) PVC insulated single core unsheathed copper conductor of 1100V grade in suitable PVC rigid pipe on wall and ceiling with continuous earth wire connection 14 SWG TC wire with painting of suitable colour. (derived from SD 54)
Supply and fixing of TNEB meter board suitable for 32A three phase service connection with 3 Nos. 32A fuse unit (500V) 32A neutral link and earth link (1" x 1/8" copper flat) on TW plank of size 600mm x 450mm x 19mm with supporting TW reepers of 1" thick an either side with painting with suitable bolt and nuts for fixing the TW plank on wall with earth connection and inter connection with 7/20 PVC insulated copper wire from EB meter to fuse unit. SD 127)
supply and run of 4 core 16 sq.mm PVC Armoured cable of 1100 V Grade with ISI mark (Part @ r) V
Supply and run of 4 core 10 Sq.mm PVC Armoured cable of 1100 V Grfade with ISI Mark. (Part E q) V
Wiring with 2 x 1.5 sq.mm. (22 / 0.3) PVC insulated single core unsheathed copper conductor of 1100V grade in suitable PVC rigid pipe concealed in wall and ceiling with PVC accessories in flush with wall with 3mm thick hylum sheet cover with TW switch box and 5A FT switch with continuous earth wire connection of 14 SWG TC wire for making good of the concealed portion with suitable colour for PVC concealed light point / fan point (for electronic regulator). SD 23
Wiring with 2 x 1.5 sq.mm. (22 / 0.3) PVC insulated single core unsheathed copper conductor of 1100V grade in suitable PVC rigid pipe concealed in wall and ceiling with PVC accessories in flush with wall with 150mm x 100mm x 113mm TW switch box with 3mm thick hylem sheet cover for 5A 3 pin non inter locking wall socket with 5A flush type switch with continuous earth wire connection of 14 SWG TC wire and making good of the concealed portion with suitable colour for concealed PVC plug point (SD 38)
18 W LED Tube Light for T 8 Fitting (single side) (15-g)
Supplying and fixing 12" (30cm dia) light duty Exhaust fan including cost of all materials, labour, lead, lift, etc., complete Twad Pg No.177 (2 b)
Goods and Services Tax (18%)
stage.html
html • 0.01 MB
boq_comp_chart.xlsx
xlsx
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .