ADDITION/ALTERATION TO BLDG NO. T-227, PROVN OF WEATHER PROTECTION SHED FOR GUARDS AND SECURITY EQUIPMENT AT CERTAIN ENTRY GATE AND XBIS ROOM IN TECH AREA AND LAYING OF POWER CABLE (50SQ MM) BETWEEN ARRESTER BARRIER HUT AND R/W CONTROLLER HUT AT ORP-

Amount

Dismantling of stone/boulder masonry, built in cement mortar including all quoins, arches, pillars, etc. complete all as specified and directed.

Demolition of cement concrete of any description & in any position not otherwise specifically provided for.

Surface excavation n exc 30 cm deep and averaging 15 cm deep, getting out in hard/dense soil complete all as specified and directed.

Excavation in trenches n exc 1.5m wide and n exc 1.50m in depth for, foundations etc or for pier holes etc n exc 10 sqm on plan and n exc 1.50m in depth and getting out in hard/ dence soil complete all as specified and directed.

M&L for damp proof course in cement concrete 1:2:4,type B-0, 40mm thick to horizontal or vertical surfaces including necessary form work complete all as specified and directed.

M&L for hard core (with broken stone/boulders) of gauge not exc 63 mm, deposited, spread and levelled in layers n exc 15 cm thick, watered and rammed to a true surfaces complete all as specified.

M&L for 75mm thick PCC 1:4:8, type D-2, using 40 mm graded stone aggregate as in,sub base for floor/path complete all as specified and directed

M&L 75mm thick PCC 1:3:6 type C-2 (40mm graded stoneaggregate as in plinth protection/footpath finished even and smooth without using extra cement complete all as specified.

S&F rubber moulded chequred coloured cement concrete tiles 30cmx30cmx25cm thick, set, jointed and pointed in neat cement slurry in floor with grey cement and pigment laid over and including 20mm thick screed bed in cm 1:6 finished even and fair complete all as specified.

M&L for light shade vitrified ceramic colour tiles 10mm thick (square/rectangular) polished area of each tiles exc 0.42 sqm but n exc 1.00 sqm in floor etc set and jointed in neat cement slurry and pointed in white or coloured cement to match shade of tiles laid over and including 20 mm thick screed bed in CM 1:6 finished even and fiar complete all as specified.

M&L for two coats of oil bound distemper over one coat of primer over and including 3mm thick layer of wall care putty on walls new plastered surfaces including preparation of surfaces complete all as specified.

M&L for two coats of oil bound distemper over a coat of primer over and including 3mm thick coat of wall care putty on new plastered surfaces of ceiling including preparation complete all as specified and directed.

M&L for complete removal of existing treament on old surfaces of walls and applying two coats of oil bound distemper over one coat of primer over and including 3mm thick layer of wall care putty including preparation complete all as specified.

M&L for two coats of exterior emulsion paint "Apex ultima" over a coat of primer over and including 3mm thick layer of wall care putty on new plastered surfaces including preparation of surfaces complete all as specified and directed.

M&L for complete removal of existing treatment on old surfaces of walls and applying two coats of exterior emulsion paint "Apex ultima" over a coat of primer over and including 3mm thick layer of wall care putty including preparation of surfaces complete all as specified and directed.

M&L for 25mm dia fancy type PVC coated on MS Pipe coloured curtain rod with brackets and knobs at both ends as per site requirement including taking down old existing PVC conduit pipes with accessories complete all as specified and directed. Note : The cost of brackets and knobs is deemed to be including in the quoted rate. Nothing extra shall be paid on this account.

S&F three track aluminium powder coated sliding window with three sliding shutter , the size of outer frame, three track 100 x 37x 1.50mm ( using two track for glazed window shutter and one track for wire gauged ) , the section shutter size 37x 18x 1.2mm)and glazing with 5 mm thick Transparency glass of poly carbone including all-around suitable rubber gasket and stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.4mm and fixed on aluminum flat and inserted in the frame of shutter with tracking arrangement each sliding window shall be provided with one number handle including locking arrangement & 2 numbers’s sliding rollers of nylon with including all necessary fittings complete all as specified and directed.

S&F fixed type powder coated aluminium ventilators with provision of movable slanting Transparent glass strips 75mm wide and 5 mm thick of poly carbone including all necessary fittings arrangement complete using aluminium section 100x44.45x1.5mm thick etc in frame complete all as specified.

S&F anodized aluminium sliding brown/white colour door made of anodized aluminium frame size 101x44x2mm thick and anodized aluminum shutters having bottom rail of size 114x44x2mm ,top rail 83x44x2mm, middle rail 85x44x2mm with two numbers of disc/D type handle in each shutter, 200mm size aluminum tower bolts 02 Nos brass lock 04 levers and key, necessory rollers etc, glazing with 5mm thick tinted glass in upper panel and with 12mm thick pre laminated particle board in lower panel including rubber gasket, aluminum beading compete all as directed.

Removing excavated materials n.exc 100m and depositing where directed at a level n exc 1.5m above the starting point and complete all as directed by Engr-in-charge

M&L for 25mm thick PCC 1:2:4 type B-0, using 12.50 mm graded stone aggr, laids to slop mixed with WPC @ 3% of cement all as specified.

M& L APP based polymeric membrane,3mm thick (minimum), weighing 3.5 kg/sqm reinforced with polyester non woven fabric matt (weighing not less than 160gms/sqm) shall over plaster 15mm thick cement mortar in CM (1:4) with water proofing compound as in screed bed over slab when concrete is green and finally finishing the top surfaces of APP membrane with two coats of bitumen based UV reflective & water proofing aluminium paint with maximum coverage 8.00 sqm per litre per coat complete all as specified and as directed. (Note: WPC shall be measured and paid for under relevant item of this schedule).

S&F anodised aluminium snap grid frame work for false ceiling size of grid 605 X 605 mm complete all as specified.

M&L for 12mm thick Non asbestos fibre cement building boards fixed or laid/inserted to aluminium/GI frame work with screws to ceiling flat or sloping complete all as specified.

S&F 12mm thick toughned frosted/coloured transparent poly carbon glass partitional wall with aluminium frame work including necessary fixing arrangement with wall/columns complete in all respect as specified.

S&F powder coated aluminium frame work using aluminium section 100x44.45x1.5mm thick with fibre glass transulent colour plain sheet 5mm thick as fixed in wall/ ceiling for sun light protection etc complete all as specified.

S & F for pressed steel frames of size 105 X 60 mm with one or more rebates including necessary fixing lugs hinges, locks strike plate etc(thickness of sheet shall be 1.25mm) and making good the plaster of wall in CM 1:6 finsished even and smooth without using extra cement complete all as specified.

S&F factory made flush shutter 35 mm thick, solid core construction, with block board core and plywood face panels, commercial type on both sides complete all as specified and directed.

S&F 35mm thick factory made glazed and skeleton shutters open rebated and prepared to receive glass, gauge etc (without sash bars), edges of framing plain, chamfered or rounded, fitted with cut and mitred beads, for securing glass etc sizes of members of shutters as specified in SSR Part-I, section 8, clause 8.24(a) complete all as specified.

S & F 100 mm long Butt hinges, extruded aluminium alloy, with galvanised mild steel hinge pin, anodised and fixed, type B-21all as spd and dircted.

S&F Alumnium handles, cast type anodised 125 mm long complete all as specified.

S&F aluminium alloy ,anodised ,sliding door bolt 250 mm in length with hasp, staple (bolt type) and fixing bolts and sliding bolts of extruded sections and fixinf bolts and sliding balls, clips of sheet, cast or extruded sections complete all as specified.

S&F 150mm long Mild steel ordinary rat tail rod pattern springs including roller and roller plate complete all as specified.

S & F Stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified.

S&F IInd class HW plain fillets square,rectangular or triangular in section ,clean sawn, screwed with nails or brads, sectional area exc 13sqcm and n exc 25sqcm complete all as specied and directed.

S&F in repairs 12 mm thick Particle board, medium density, flat pressed, single layer type or three layer type with BWR type adhesive, fixed with screws to timber frame complete all as specified and directed.

S & F Continuous (piano) hinges, mild steel, bright finish or electrogalvanised Width of flaps when open 40 mm complete all as specified and directed.

S&F magnetic Ball catches with 8mm dia steel ball, and brass body and striking plate including letting in and fixed.

S&F Floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in floor, over all length of cover plate 150mm complete all as specified.

S&F door closer hydraulically regulated, designation No. 3, universal type, suitable for door shutters of 851 to 1000mm in width and of weight between 61 to 80 Kg complete all as specified.

M & L for preparations of new or previously untreated wooden surfaces of any description not otherwise described over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specifified and directed.

Supply only integral water proofing compound complete all as specified.

Excavating in post holes in hard/ dense soil (or similar holes) each n exc. 0.5 cum, getting out, returning, filling in and ramming earth or around, in layers n exc 25 cm watering and removing surplus soil to a distance n exc 50M and making good surface complete all as specified.

M&L PCC 1:3:6 type C-2 (using 40 mm graded stone aggregate) as in foundation filling and mass concrete etc.

M&L for steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I.S.1161-1979 grade St.-240 complete all as specified.

M&L for roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc. FE 410-W(Gde-E 250) quality A complete all as specified.

M&L for mild steel plates, (plain or chequered) channels, square cut or notiched 9Ordinary and counter sunk) including forming holes, without any attachment complete including fix to vertical post by welding or bolting confirming to Fe-290 Gde E-165. complete all as specified.

M&L for two coats of synthetic enamil paint over a coat of red oxied primer surfaces of any description, over 10 cm in width or girth, not otherwise described complete all as specified.

M&L for pre-painted galvatune aluminium zinc coating GI based corrugated steel sheet 0.50 mm thick of any colour having tensile strength of 550 Mpa as in roof vering/ cladding to wall, fixed with self tapping screws complete all as specified.

M& L for Mild Steel as in wind ties for roof including securing bolts, post and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc including necessary drilling, bolting or riveting etc and similar work confirming to Fe-290 Gde E-165. complete all as specified.

M&L for Point wiring with 1.5 Sqmm PVC insulated and unsheathed multi stranded FRLSH flexible copper conductor cable in and including rigid PVC conduit concealed in wall for one light/fan controlled by one switch including 1.5 Sqmm FRLSH, PVC insulated and unsheathed multi stranded flexible copper conductor cable as earth wire to common earth dolly, including cutting, chases in block/ stone masonry wall , replastering and making good to match the existing specifications complete all as specified and directed by Engr-in-charge. Note: a) Unit rate shall be included for cutting chases for conduits and sunken boxes and making good to wall, floors etc

All as per item No. 51 but for one 3 pin 5 Amp socket outlet on same board complete all as specified.

All as per item No. 51 but for one 3 pin 5 Amp socket outlet on independent board complete all as specified.

M&L for Point wiring with 2.5 Sqmm PVC insulated and unsheathed multi stranded FRLSH flexible copper conductor cable in and including rigid PVC conduit concealed in wall for one 3 pin socket outlet 15 Amp on independent board including 2.5 Sqmm FRLSH, PVC insulated and unsheathed multi stranded flexible copper conductor cable as earth wire to common earth dolly, including cutting chases in block masonry wall , replastering and making good to match the existing specifications complete all as specified and directed by Engr-in-charge. Note: a) Unit rate shall be included for cutting, chases for conduits and sunken boxes and making good to wall, floors etc.

S&F modular switch piano flush button single pole one way 6 amps 230 volts,complete all as specified

S&F modular switch piano flush button single pole one way 16 amps 230 volts,complete all as specified

S&F modular socket outlet 6 amps 2/3 pin combined 2 module flush type, 230 volts, complete all as specified

S&F modular socket outlet 6A/16A 2/3 pin combined 2 module flush type, 230 volts, complete all as specified

S&F fan regulator 120 W, 2 module electronic step type, 230 volts complete all as specified

S&F Sheet metal enclosures for fixing MCBs SPN 8 way, 240 volts with 200 Amps rated bus bar with double door fixed flushed to the wall including making the hole in the wall and fixing the DB including cement work and plastering complete all as directed.

S&F MCB single pole and neutral, 240 volts 32 Amps with 10 KA breaking capacity of 'C' series complete all as specified.

S&F MCB single pole and neutral, 240 volts 63 Amps with 10 KA breaking capacity of 'C' series complete all as specified.

S&F MCB single pole, 240 volts 6 to 20 Amps with 10 KA breaking capacity of 'C' series complete all as specified.

S&F Modular white cover plate with frame oval type size 8 module complete all as specified.

S&F Modular Metal flush box oval type size 8 module complete all as specified.

S&F Modular white cover plate with frame oval type size 3 module complete all as specified.

S&F Modular Metal flush box oval type size 3 module complete all as specified.

S&F LED light fitting (2x2 ft) size recessed type 36 W, environmental friendly energy effiicient complete with all accessories pre wired and including connecting up with three core flexible copper conductor cable with suitable size complete all as specified.

Supply and fix LED street light 20 W, with aluminium pressure die cast housing, glass in the front with complete with all accessories internally pre-wired and including connecting up with three core twisted flexible copper conductor cable with suitable size complete all as specified.

M&L bracket for street light fitting made out of 25 mm bore pipe "light grade" length 1.20M GI tube bent to shape required, fixed with and including MS flat iron clamps, bolts, nuts, washers duly painting the bracket with two coats of aluminium paint over a coat of zinc chrome primer including PVC copper cable 1.5 Sqmm 3 core connecting from ceiling rose to light fitting complete all as specified and directed.

Supply & fix ceiling rose surface bakelite 65x50mm three terminal isolated body complete all as specified.

M&L for sub main wiring with two run of single core (2x4 sqmm) (FRLSH) PVC insulated and unsheathed cable with copper conductor (multistranded) having nominal area 4.0 Sqmm drawn through including rigid PVC conduit concealed type and making electric connections including one run (FRLSH) PVC insulated single core copper conductor cable 4.0 Sqmm as a earth continuity conductor drawn rigid PVC conduit, including cutting chases in brick wall wherever necessary, replastering and making good to match the existing specifications complete all as specified and directed by Engineer-in-Charge. Note :- (i) Rates are deemed to be included cutting, chases of conduit and making holes in wall/floor for passing in or through conduit (ii) Two runs of 4.0 sqmm single core (FRLSH) PVC insulated copper conductor cable, one run of 4.0 sqmm copper conductor cable (FRLSH) as a earth lead and one run of PVC conduit will be measured as a one unit.

M&L for sub main wiring with two run (2x2.5 sqmm) of single core (FRLSH) PVC insulated and unsheathed cable with copper conductor (multistranded) having nominal area 2.5 Sqmm drawn through including rigid PVC conduit concealed type and making electric connections including one run (FRLSH) PVC insulated single core copper conductor cable 2.5 Sqmm as a earth continuity conductor drawn through rigid PVC conduit, including cutting chases in brick wall wherever necessary, replastering and making good to match the existing specifications complete all as specified and directed by Engineer-in-Charge. Note :- (i) Rates are deemed to be included for cutting, chasing of conduit and making holes in wall/floor for passing in or through conduit (ii) Two runs of 2.5 sqmm single core (FRLSH) PVC insulated copper conductor cable one run of 2.5 sqmm copper conductor cable (FRLSH) as a earth lead and one run of PVC conduit will be measured as a one unit.

S&F Single pole and neutral enclosure with a two pin and earth plug and socket with double pole MCB 20Amp, 240 Volt complete all as specified.

Taking down carefully existing serviceable split air conditioner (indoor and outdoor unit) any type upto 2 TR and voltage stabilser any type including all accessories any type by disconnecting electric connection, copper pipe, finishing good to the disturbed surfaces as per existing specification, refixing the airconditioner (indoor and outdoor unit) and voltage stabilser at different location in the same building by erecting the outdoor unit n.exc to the distance of 5 mtr from indoor unit, including replacement of new copper pipe of existing size/shape insulated by PUF insulation connected from outdoor to indoor unit n.exc 5 mtr making suitable opening in the bolck/stone masonry for passing the copper conduit, complete all as specified and directed by Engr-in-Charge. Note : (i) Replacement of Copper pipe of existing size insulated by PUF insulation connected from outdoor to indoor unit n.exc 5 mtr are deemed to be included in the rate quoted by contractor.

Taking down unservicable main switch/distribution board any type including MCB's and disconnecting electrical connection from mains and making good the disturbed surfaces complete all as specified.

M & L for Supplying, laying, connecting and testing in trenches, under floors/ roads or on walls Cable XLPE insulated armoured heavy duty, electric cables ISI marked with stranded aluminium conductor, 1100 volts grade cross sectional area of 50 Sqmm, 3.5 core complete all as specified and directed by Engineer in charge.

Excavation in trenches not exc 1.5 Mtr wide and not exc 1.5 mtr depth for laying of cable n exc 10 sqm on plan and getting out in any type of soil complete all as specified.

Removing of excavated surplus soil not exc 50 m and deposited where directed at a level not exc 1.5 m above the starting point complete all as specified.

M & L for sand cushioning to all around the cable protection of natural Tibba sand all as directed. (Note : Punning thickness will be measured and paid for payment purpose.)

S & L stone patti quarry faced Jodhpur type 4 to 5 cm thick and 25 to 30 cm wide putting on cable abutting to each other for cable protection complete all as directed.

Supply and laying galvanised steel tube 80mm bore " light grade" for protection of cable complete all as directed by Engineer-in-Charge.

Supply and fixing LT cable route indicator cast iron of suitable size mounted on 40 x 40 x 3 mm angle iron with height of 1.5 metre along with LT cable trench including planting in ground with PCC 1:3:6 type C-2 using 40mm graded stone aggregate complete all as specified and directed.by Engr-in-Charge.

Supply and fixing of MCCB 4 pole 100 Amp,415 volt, 50 Hz, Ics=100% Icu Thermal magnetic release type,adjustable overload setting 0.8-1.0 X In, breaking capacity 30 KA with Sheet metal enclosure duly painted and necessary connecting spreader and contacts complete all as specified and directed by Engineer in charge. Make- Cat part CM90679OOLO of L&T or equivalent in Siemens/Legrand/Havells

Supply and fixing on load changeover switch 4 pole 100 Amp,415 volt, 50 Hz,in sheet metal enclosure and necessary connecting spreader and contacts complete all as specified and directed by Engineer in charge. Make- C&S reference no. E-CSCS100NM4CO or equivalent in Havells,siemens

M&L for Point wiring with 1.5 Sqmm PVC insulated and unsheathed multi stranded FRLSH flexible copper conductor cable in and including rigid PVC conduit concealed in wall for one light/fan controlled by one switch including 1.5 Sqmm FRLSH, PVC insulated and unsheathed multi stranded flexible copper conductor cable as earth wire (green colour) to common earth dolly, complete all as specified and directed by Engr-in-charge. Note: a) Unit rate shall be included for cutting chases for conduits and sunken boxes and making good to wall, floors etc

All as per item No. 86 but for one 3 pin 5 Amp socket outlet on same board complete all as specified.

All as per item No. 86 but for one 3 pin 5 Amp socket outlet on independent board complete all as specified.

M&L for Point wiring with 2.5 Sqmm PVC insulated and unsheathed multi stranded FRLSH flexible copper conductor cable in and including rigid PVC conduit concealed in wall for one 3 pin socket outlet 15 Amp on independent board including 2.5 Sqmm FRLSH, PVC insulated and unsheathed multi stranded flexible copper conductor cable as earth wire (green colour) to common earth dolly, complete all as specified and directed by Engr-in-charge. Note: a) Unit rate shall be included for cutting, chases for conduits and sunken boxes and making good to wall, floors etc.

S&F switch piano flush button single pole one way 5 Amps 230 Volts,complete all as specified and directed by Engr-in-Charge.

S&F socket outlet 5 Amps 5 pin flush type, 230 Volts, complete all as specified and directed by Engr-in-Charge.

S&F Switch socket combination 2 in 1, 5 pin, 5 Amp flush type.

S & F Switch socket combination 2 in 1, 6 pin, 5 and 15 Amp flush type universal complete all as specified.

S&F stepped type electronic fan regulator flush type on the existing phenolic laminated sheet, etc. as required.

S&F LED tube light fitting 1x18 w,230v, including LED (tube rod) ,4 feet batten fitting fixtures, complete with all accessories internally pre-wired and including connecting up with three core twisted flexible copper conductor cable with suitable size. complete all as specified Make :Havells/ Crompton / Philips/Bajaj or its equivalent.

S&F sheet metal powder enclosure powder coated versatile double door single pole and neutral (SPN) distribution board for MCB provisions 230Volt, 50Hz AC supply for 04 way. fitted with copper bus bar rated 200amps, neutral link, earth bar complete all as specified.

S & F Ceiling fan of 1200mm sweep BEE 5 star rated complete with blades down rod, canopy, etc including hanging in position and connecting up from ceiling rod to fan using flexible 3 core 0.5 sqmm copper conductor PVC insulated and PVC sheathed 3 core cable complete all as specified and directed. Note : Winding wire of the fan shall be copper.

M&L for Earthing complete with galvanized steel earth plate electrode60×60cm.× 6mm thick buried directly in ground (Earth pit not less than 2.25 Metre deep below ground level) with top edge of the plate not less than 1.5 metre below normal ground level, connected to galvanized earth lead wire 4.0 mm dia by means of bolts, nuts, check nuts and washers of galvanized iron or steel all as shown in electrical plate No.5 of SSR Part-I (2009) including filling of charcoal dust , common salt all around Earth plate upto 150mm, 20mm bore GI medium grade watering pipe, 15 mm bore light grade earth lead protection pipe upto main board, funnel with wiremesh, 40mm thick RCC 1:2:4 type B-1 using 20 mm graded crushed stone aggregate reinforced with suitable handle and angle iron frame and necessary excavation and earth work in any type of soil etc. complete all as specified and as directed including testing on completion. (Note: The rate quoted include cost of min 7.5 metre earthing wire)

Excavation in trenches in soft/loose soil not exceeding 1.5 metre wide and n. exc 1.50m depth for foundation etc or for shafts, wells, cesspits , man holes, pier holes etc n. exc 10 sqm on plan and getting out in soft /loose soil complete all as specified.

Excavation in trenches not exceeding 1.5 metre wide and depth exceeding 1.5 metre but not exceeding 3.0 metre and getting out in soft/loose soil complete all as specified.

M&L for Treating the bottom and sides of excavation at the rate of 5 litres of emulsion per square metre of surface area complete all as specified.

M&L for Treating the backfill in contact with foundation at the rate of 7.5 litres of emulsion per square metre of vertical surface (Area of the sub structure in contact with back fill to be measured) complete all as specified.

M&L for Treating the top surface of filled earth at the rate of 5 litres of emulsion per square metre of surface area complete all as specified.

M&L treating the soil under plinth protection at the rate of 5 litres of emulsion per square metre of surface area

Returning filling in, including spreading, leveling, watering and well ramming in layers not exceeding 25 cm complete all as specified.

Removal of excavated soil to a distance exc 7 KM but not exc 8 KM and depositing where directed at a level not exc 1.5 meter above the starting point complete all as directed.

M&L Kota stone slabs, 20-25mm thick, machine cut as in flooring of size not less than 0.25 Sqm each, set and jointed in cement slurry laid over & including screed bed of 20 mm thick in cement mortar (1:6) and pointed in cement mixed with pigment to match the shade of slab including rubbing, cutting and polishing (mirror type) complete all as specified.

M&L Kota stone slabs, 16mm thick, machine cut as in skirting, set and jointed in cement slurry laid over & including rendering coat of 15 mm thick in cement mortar (1:4) and pointed in cement mixed with pigment to match the shade of slab including rubbing, cutting and polishing complete all as specified.

M&L cement concrete (1:4:8) type D-2 using 40mm graded stone aggregate as in foundation filling and mass concrete or in sub base of floors complete all as specified.

M&L RCC M-25 (design mix) using 20mm graded stone aggregate as in foundation,including rafts, footings, foundation beams, plinth beams, bases for columns, etc basement slabs, under reamed piles and mass concrete all as specified and directed.

Form work to sides of cocrete foundations (rough finished) on flat surfaces of foundations , footings, bases of column, raft and raft beams sides and soffits(if any) of foundation and plinth beams, and similar works vertical or to batter complete all as specified.

M&L RCC M-25 (design mix) using 20mm graded stone aggregate as in columns, pillars, piers , posts and struts and the like complete all as specified.

Form work (rough finished) to sides of pillars, posts, struts, piers, columns and stanchions complete all as specified and directed.

M&L RCC M-25 (design mix) using 20 mm graded stone aggregate as in beams, cantilevers, bressummers, lintels over 1.5 metre span and chajjas complete all as specified.

Form work (rough finished) to sides & soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including supports overhangs, etc also splays between floors and beams, etc complete all as specified and directed.

M&L for RCC M-25 (design mix) using 20mm graded stone aggregates as in slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like all as specified and directed.

M&L RCC M-25 (design mix) concrete using 20mm graded stone aggregates as in fins, fascias, louvres, parapets, and railing exc 60cm in height, newels, balustrade, and like all as specified and directed.

M&L RCC M-25 (Design Mix) (20mm graded aggregates) as in chajjas and the like complete all as specified

Form work to fins, louvers, fascias & chajjas for rough finished complete all as specified

Form work (rough finished) to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200 mm thick (horizontal/sloping), complete all as specified.

Form work (rough finished) to edges of concrete flats, treads, breaks in floors, window cills, concrete railings, openings in concrete walls floor and roofs not exceeding 20 cm wide and sides of RCC/ PCC bands in walls, horizontal or sloping and similar work exc 10 cm but not exceeding 20 cm wide complete all as specified and directed.

M & L for Mild steel 10mm dia and over, TMT bars as in reinforcement, cut to length, bent to shape, required including cranking,bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia complete all as specified.

M & L for Mild steel 8mm dia TMT bars as in reinforcement, cut to length, bent to shape, required including cranking,bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia complete all as specified.

M & L for Mild steel 8mm dia TMT bars as in stirrups spacers and binders, cut to length, bent to shape, required including cranking, hooking at ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia complete all as specified.

M&L precast cement concrete block masonry with solid blocks made of PCC (1:3:6) type C1 using 20mm graded stone aggregate exc 10cm in width and set in CM 1:6 complete all as specified and directed.

M&L 15mm thick rendering in cement mortar (1:6) on brick wall or concrete surfaces, finished even and smooth without using extra cement complete all as specified and directed.

M&L Rendering 15mm thick in cement mortar (1:4) on brick walls or concrete surfaces, finished even and smooth without using extra cement mixed with water proofing liquid complete all as specified and directed.

M & L for 10 mm thick rendering in CM 1:3, finished even and smooth as in ceiling all as specified and directed..

M & L for preparation of new plastered surfaces of walls and applying two coats of cement base paint over a coat of primer complete all as specified and directed.

M&L for Preparation of new ceiling surfaces of any description & applying two coats of distemper oil emulsion a coat of primer complete all as specified.

M&L for Preparation of new plastered surfaces of walls and applying two coats of oil bond distemper over a coat of primer complete all as specified.

M&L sand filling under floor, spreading and levelling in layers not exceeding 25cm each layer including watering and well ramming complete all as specified and directed.

M&L for applying roof treatment on top of roof with 3 APP modified membrane weight not less than 3.5 Kg/Sqm) with non woven polyster reinforcement / mat ( centre core ) shall be laid by torch application method with overlap 100 mm on length side and 100 mm on width side including a coat of bituminious oil based primer ( IS : 3384) @ 250 gm / Sqm all as specified and directed..

M&L Rendering 10mm thick in cement mortar (1:4) on concrete surfaces as on roof slab, finished even and smooth without using extra cement mixed with water proofing liquid as per manufecturer's instructions complete all as specified and directed.

Supply only liquid water proofing compund all as specified and directed.

M&L for 100mm thick Cement concrete (1:4:8), type D-2 using 40mm graded stone aggregate finished surface even & smooth without using extra cement complete all as specified and directed.

S & F anodized aluminum work for partition, door frame & shutter, windows frame with one or more rebates fabricated with tubular and other sections weighing 0.55 Kg/Rm of approved make fixed with rawl plugs and screws or with fixing clips or with expansion hold fasteners including necessary filling up of gap at junctions at top, bottom & sides with required PVC neoprene belt etc. Aluminum sections shall be jointed mechanically where ever required including supply and fixing cleats angles, aluminium snap beading for glazing /panelling, CP brass/stainless steel screws including free for fixing all required fitting/fixtures all as specified and directed.

S & F anodized aluminum window/ventilator shutter only fixed/sliding type/with or without sash bar of aluminum section weighing not less than 0.25 Kg/m including necessary joining angle cleats, glazing clips, dust guard, roller, anodized aluminum snap beading, steel screw for fixing, anodized aluminum fittings such as peg stay, stainless steel butt hinges, suitable purpose made handle, etc complete accessories required for fixing all as directed and including providing AC/cooler opening arrangement etc and only in aluminum sliding window, frame should be measured by weight separately all as directed

S&F aluminum grill of design and pattern as approved including aluminium beading complete all as specified and directed .

M&L 12mm thick prelaminated particle board, exterior grade, prelaminated both side with decorative choice lamination & fixed with screws to aluminum frame complete all specified and as directed .

S & F double action floor spring hydraulically regulated made up of minimum 1.25mm thick aluminum alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty complete all as specified and directed .

S & F mild steel mortice lock vertical type size 100mm 6 levers complete all as specified and directed .

Rounding/bull nose polishing to edges of granite/kota stone slabs edge, such as in steps, cooking platform, window cill and other similar situations complete all as directed.

M&L for 25 mm thick PCC 1:2:4 type B-0 using 12.5 mm graded stone aggregate as in bedding layer to floor tiles all as specified and directed .

S&F 150mm size, aluminium D type purpose made fancy type handle for aluminum door (cast type) anodized, and fixed with steel screws complete all as specified and directed.

S&F Stainless steel wire cloth, 0.36mm nominal dia of wire and and average width of aperture not more than 1.40mm fixed with stainless steel wire staples all as specified and directed.

S & F Aluminium anodised barrel tower bolt of extruded section, 150mm length of bolt and fixed with screws, complete all as specified and directed.

M&L for 20mm thick granite (of any type) work (table rubbed and polished ) in steps, jambs, pillars, window cills, cooking plateforms and like laid over and including 15mm thick screed bed in CM 1:6, including pointing in white cement 1:2 using marble dust with admixture of pigment to match with shade of granite including moulding work on exposed edges of granite stones complete all as specified.

BABU LAL PARIHAR