Construction of new infrastructure for Mahila Soldiers for various Locations (Company Operating Base) Tuipang, Parva, Saiha and Bn HQ Lunglei of 3(NH)Battalion of Assam Rifles (now 20 AR) Mizoram

Amount

SCHEDULE ‘A' Part-I (COB Tuipang)

Construction of Riflewoman Barrack of size 15M x 8M incl verandah using MS tubular structure for roof frame, coloumn,truss including wooden frame for wall and false ceiling frame work with second class hardwood and 4mm thick plywood for internal wall cladding,PCC flooring, PPGI sheet roofing and wall cladding using 0.5mm thick PPGI sheet with 40 mm x 6mm wind tie with attached toilet tank staging and 1000 litres HDPE tank all as per approved drawings with tender documents

Construction of Toilet block of size 7.2M x 2.2M, PCC Floor with Glazed floor tiles 300mm x 300mm, MS Tubular structure for roof frame, coloumn,truss with PPGI sheet roofing and wall cladding using 0.5mm thick PPGI sheet with 40 mm x 6mm wind tie all as per Approved drawings and specifications including water tank staging with 1000 litres HDPE tanks all as all as per approved drawings with tender documents

Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit/PVC Casing Caping, with piano type switch, suitable size PVC box and earthing the point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable etc. as required for RW Bk.

Supplying and fixing PVC box of 180mm X 100mm X 60mm deep (nominal size) on surface or in recess including providing and fixing 6 pin ,15/16 amps multipurpose socket outlet and 15/16 amps piano type switch, connection, painting etc as required.

Supplying and fixing PVC box of 150mm X 75mm X 60mm deep (nominal size) on surface or in recess including providing and fixing 3 pin 5/6 A socket outlet and 5/6 A piano type switch, connections, painting etc. as required.

Supplying and fixing 20 mm of medium class PVC conduit/casing caping along with accessories in surface/recess including cutting the wall/panel and making good the same in case of recessed conduit as required

Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit/casing caping as required. 2 X 2.5 sq. mm + 1 X 2.5 sq. mm earth wire.

Supplying and fixing 3 pin, 5 A ceiling rose on the existing junction box/ wooden block including connections etc. as required.

Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required.2 X 1.5 sq. mm + 1 X 1.5 sq. mm earth wire.

Supplying and fixing PVC batten/ angle holder including 01 x 15W LED bulb connections etc. as required.

Supplying and fixing following socket on the existing switch box/ cover including connections etc. as required.3 pin 5/6 amp socket outlet.

Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit/casing caping as required. 2 X 6 sq. mm + 1 X 6 sq. mm earth wire.

Supplying and fixing following way, single pole and neutral, sheet steel, MCB distribution board, 240 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator)2 + 4 way, Double door

Supplying and fixing 5 A to 32 A rating, 240/415 V, 10 kA, "C" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required. Single pole and neutral

Supplying and fixing 5 A to 32 A rating, 240/415 V, 10 kA, "C" curve, MCB(SP) suitable for inductive load of following poles in the existing MCB DB complete with connections,testing and commissioning etc. as required.

Earthing with G.I. earth plate 600 mm X 600 mm X 6 mm thick including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe of 2.7 metre long etc. with charcoal/ coke and salt as required.

Supply, Installation,testing and commissioning of pre-wired, 20/22 Watt LED fitting, with all accessorioes complete.directly on ceiling/wall, incl connection with 1.5 sqmm FR PVC insulated, copper conductor, single core cable and earthing etc as required.

Supplying and fix LED light fitting 1 x 9W Bulk Head with all accessories suitable for single phase, 230 V, complete as required

Supply & Fix ceiling fan 1200 mm sweep, including fan regulator & wiring connection upto ceiling rose

Wiring for 5 Amp Socket (SB) with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable with piano type switch in existing Board and earthing the point with 1.5 sq.mm. FRLS PVC insulated copper conductor single core cable etc. as required.

Supply anf Fix 10 Sqmm 2 Core, 1100 volts grade heavy duty cable PVC insulated aluminium served with inner sheathing of PVC tape and over all PVC in service connection.

Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit/PVC Casing Caping, with piano type switch, suitable size PVC box and earthing the point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable etc. as required as required for toilet Block

Supplying and fixing PVC box of 180mm X 100mm X 60mm deep (nominal size) on surface or in recess including providing and fixing 6 pin ,15/16 amps multipurpose socket outlet and 15/16 amps piano type switch, connection, painting etc as required.

Supplying and fixing 20 mm of medium class PVC conduit/casing caping along with accessories in surface/recess including cutting the wall/panel and making good the same in case of recessed conduit as required

Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit/casing caping as required. 2 X 2.5 sq. mm + 1 X 2.5 sq. mm earth wire.

Supplying and fixing 3 pin, 5 A ceiling rose on the existing junction box/ wooden block including connections etc. as required.

Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required.2 X 6 sq. mm + 1 X 6 sq. mm earth wire.

Supplying and fixing PVC batten/ angle holder including 01 x 15W LED bulb connections etc. as required.

Supplying and fixing following socket on the existing switch box/ cover including connections etc. as required.3 pin 5/6 amp socket outlet.

Supplying and fixing following way, single pole and neutral, sheet steel, MCB distribution board, 240 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator)2 + 4 way, Double door

Supplying and fixing 5 A to 32 A rating, 240/415 V, 10 kA, "C" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required. Single pole and neutral

Supplying and fixing 5 A to 32 A rating, 240/415 V, 10 kA, "C" curve, MCB(SP) suitable for inductive load of following poles in the existing MCB DB complete with connections,testing and commissioning etc. as required.

Earthing with G.I. earth plate 600 mm X 600 mm X 6 mm thick including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe of 2.7 metre long etc. with charcoal/ coke and salt as required.

Supply, Installation,testing and commissioning of pre-wired, 20/22 Watt LED fitting, with all accessorioes complete.directly on ceiling/wall, incl connection with 1.5 sqmm FR PVC insulated, copper conductor, single core cable and earthing etc as required.

Supplying and fix LED light fitting 1 x 9W Bulk Head with all accessories suitable for single phase, 230 V, complete as required

Supply and Fixing 10 Sqmm 2 Core, 1100 volts grade heavy duty cable PVC insulated aluminium served with inner sheathing of PVC tape and over all PVC in service connection.

S &F Storage WaterHeater Capacity 50 Ltr with unplasticised P.V.C. connection pipe with PTMT Nuts, collar and bush with all connecting accessories all as directed by Engr-in-Charge.

Supplying and fixing PVC Exhaust Fan of 450 mm sweep prewired 240 volts with all acessories complete including connection with 1.5 sqmm FR PVC insulated copper conductor single core cable and earthing etc as required

Providing and fixing water closet squatting pan (Indian type W.C.pan ) with 100 mm sand cast Iron P or S trap, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required , white Vitreous china Orissa pattern W.C. pan of size 580x440 mm with integral type foot rests complete all as specified.

Providing and fixing 600x450 mm beveled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete.

Providing and fixing G.I. pipes complete with G.I. fittings and clamps, /c cutting and making good the walls etc. 15 mm dia nominal bore

Providing and fixing G.I. pipes complete with G.I. fittings and clamps,/c cutting and making good the walls etc. 20 mm dia nominal bore

Providing and fixing CP liquid soap container with bracket and its fittings of approved quality and colour, all as specified and directed

Providing and fixing CP towel rail complete with brackets with CP brass screws, approved quality and colour, 600 mm long, all as specified and directed.

Providing and fixing C.P. brass shower rose with 15 or 20 mm inlet, 100 mm diameter all as specified.

Providing and fixing CP brass bib cock of approved quality, 15mm nominal bore all as specified

Providing and fixing CP brass stop cock of approved quality, 15 mm nominal bore all as specified.

Providing and fixing ball valve (brass) of approved quality, High or low pressure, with plastic floats complete, 20 mm nominal bore all as specified.

Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require:White Vitreous China Wash basin size 630x450 mm with a pair of 15 mm C.P. brass pillar taps

Providing and placing on terrace (at all floor levels) polyethylene water storage tank capacity 1000 litre, ISI : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes including gate valve and fittings and the base support for tank.

Earth work in excavation by mechanical means (Hydraulic excavator) /manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m. All kinds of soil.

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 40 mm nominal size)

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size)

Brick work with common burnt clay modular bricks of class designation 7.5 in foundation and plinth in cement mortar 1:4 (1 cement : 4 coarse sand)

Reinforced cement concrete work in walls (any thickness), including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts etc. up to floor five level, excluding cost of centering, shuttering, finishing and reinforcement : 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20mm nominal size)

Centering and shuttering including strutting, propping etc. and removal of form for : Lintels, beams, plinth beams, girders, bressumers and cantilevers.

Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level using Thermo-Mechanically Treated bars.

Cement plaster 1:3 (1 cement: 3 coarse sand) finished with a floating coat of neat cement. 20 mm cement plaster

Providing M.S. foot rests including fixing in manholes with 20x20x10 cm cement concrete blocks 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) as per standard design : With 20x20 mm square bar

Extra for providing and mixing water proofing material in cement of plaster work in proportion recommended by the manufacturers.

Providing and fixing in position pre-cast R.C.C. manhole cover and frame of required shape and approved quality, L D- 2.5, rectangular shape 600x450 mm internal dimensions.

Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion, single socketed pipes, 110 mm diameter

Providing and fixing on wall face unplasticised - PVC moulded fittings/accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion, single tee with door, 110x110x110 mm

Providing and fixing on wall face unplasticised - PVC moulded fittings/accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion, Bend 87.5°, 110 mm bend.

Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion,single socketed pipes, 75 mm diameter

Constructing brick masonry manhole in cement mortar 1:4 ( 1 cement : 4 coarse sand ) with R.C.C. top slab with 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size), foundation concrete 1:4:8 mix (1 cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size), inside plastering 12 mm thick with cement mortar 1:3 (1 cement : 3 coarse sand) finished with floating coat of neat cement and making channels in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) finished with a floating coat of neat cement complete as per standard design : Inside size 90x80 cm and 45 cm deep including C.I. cover with frame (light duty) 455x610 mm internal dimensions, total weight of cover and frame to be not less than 38 kg (weight of cover 23 kg and weight of frame 15 kg) with sewer bricks conforming to IS : 4885 complete all as specified in drawing No MRR/Engr/115/02, sheet No 2/2 and directed.

Making soak pit 2.5 m diameter 3.0 metre deep with 45 x 45 cm dry brick honey comb shaft with bricks and S.W. drain pipe 100 mm diameter, 1.8 m long complete as per standard design with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 complete all as specified in drawing No MRR/Engr/115/02, sheet No 2/2 and directed.

Earth work in excavation by mechanical means (Hydraulic excavator) /manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m. All kinds of soil.

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 40 mm nominal size)

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size)

Reinforced cement concrete work in walls (any thickness), including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts etc. up to floor five level, excluding cost of centering, shuttering, finishing and reinforcement : 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20mm nominal size)

Reinforced cement concrete work in beams, suspended floors, roofs having slope up to 15° landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases above plinth level up to floor five level, excluding the cost of centering, shuttering, finishing and reinforcement with 1:1.5:3 (1 cement : 1.5 coarse sand(zone-III) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources).

Centering and shuttering including strutting, propping etc. and removal of form for : Lintels, beams, plinth beams, girders, bressumers and cantilevers.

Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level using Thermo-Mechanically Treated bars.

Cement plaster 1:3 (1 cement: 3 coarse sand) finished with a floating coat of neat cement. 20 mm cement plaster

Extra for providing and mixing water proofing material in cement of plaster work in proportion recommended by the manufacturers.

SCHEDULE ‘A' Part-II (COB Saiha)

Construction of Riflewoman Barrack of size 15M x 8M incl verandah using MS tubular structure for roof frame, coloumn,truss including wooden frame for wall and false ceiling frame work with second class hardwood and 4mm thick plywood for internal wall cladding,PCC flooring, PPGI sheet roofing and wall cladding using 0.5mm thick PPGI sheet with 40 mm x 6mm wind tie with attached toilet tank staging and 1000 litres HDPE tank all as per approved drawings with tender documents

Construction of Toilet block of size 7.2M x 2.2M, PCC Floor with Glazed floor tiles 300mm x 300mm, MS Tubular structure for roof frame, coloumn,truss with PPGI sheet roofing and wall cladding using 0.5mm thick PPGI sheet with 40 mm x 6mm wind tie all as per Approved drawings and specifications including water tank staging with 1000 litres HDPE tanks all as all as per approved drawings with tender documents

Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit/PVC Casing Caping, with piano type switch, suitable size PVC box and earthing the point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable etc. as required.

Supplying and fixing PVC box of 180mm X 100mm X 60mm deep (nominal size) on surface or in recess including providing and fixing 6 pin ,15/16 amps multipurpose socket outlet and 15/16 amps piano type switch, connection, painting etc as required.

Supplying and fixing PVC box of 150mm X 75mm X 60mm deep (nominal size) on surface or in recess including providing and fixing 3 pin 5/6 A socket outlet and 5/6 A piano type switch, connections, painting etc. as required.

Supplying and fixing 20 mm of medium class PVC conduit/casing caping along with accessories in surface/recess including cutting the wall/panel and making good the same in case of recessed conduit as required

Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit/casing caping as required. 2 X 2.5 sq. mm + 1 X 2.5 sq. mm earth wire.

Supplying and fixing 3 pin, 5 A ceiling rose on the existing junction box/ wooden block including connections etc. as required.

Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required.2 X 1.5 sq. mm + 1 X 1.5 sq. mm earth wire.

Supplying and fixing PVC batten/ angle holder including 01 x 15W LED bulb connections etc. as required.

Supplying and fixing following socket on the existing switch box/ cover including connections etc. as required.3 pin 5/6 amp socket outlet.

Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit/casing caping as required. 2 X 6 sq. mm + 1 X 6 sq. mm earth wire.

Supplying and fixing following way, single pole and neutral, sheet steel, MCB distribution board, 240 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator)2 + 4 way, Double door

Supplying and fixing 5 A to 32 A rating, 240/415 V, 10 kA, "C" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required. Single pole and neutral

Supplying and fixing 5 A to 32 A rating, 240/415 V, 10 kA, "C" curve, MCB(SP) suitable for inductive load of following poles in the existing MCB DB complete with connections,testing and commissioning etc. as required.

Earthing with G.I. earth plate 600 mm X 600 mm X 6 mm thick including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe of 2.7 metre long etc. with charcoal/ coke and salt as required.

Supply, Installation,testing and commissioning of pre-wired, 20/22 Watt LED fitting, with all accessorioes complete.directly on ceiling/wall, incl connection with 1.5 sqmm FR PVC insulated, copper conductor, single core cable and earthing etc as required.

Supplying and fix LED light fitting 1 x 9W Bulk Head with all accessories suitable for single phase, 230 V, complete as required

Supply & Fix ceiling fan 1200 mm sweep, including fan regulator & wiring connection upto ceiling rose

Wiring for 5 Amp Socket (SB) with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable with piano type switch in existing Board and earthing the point with 1.5 sq.mm. FRLS PVC insulated copper conductor single core cable etc. as required.

Supply anf Fix 10 Sqmm 2 Core, 1100 volts grade heavy duty cable PVC insulated aluminium served with inner sheathing of PVC tape and over all PVC in service connection.

Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit/PVC Casing Caping, with piano type switch, suitable size PVC box and earthing the point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable etc. as required.

Supplying and fixing PVC box of 180mm X 100mm X 60mm deep (nominal size) on surface or in recess including providing and fixing 6 pin ,15/16 amps multipurpose socket outlet and 15/16 amps piano type switch, connection, painting etc as required.

Supplying and fixing 20 mm of medium class PVC conduit/casing caping along with accessories in surface/recess including cutting the wall/panel and making good the same in case of recessed conduit as required

Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit/casing caping as required. 2 X 2.5 sq. mm + 1 X 2.5 sq. mm earth wire.

Supplying and fixing 3 pin, 5 A ceiling rose on the existing junction box/ wooden block including connections etc. as required.

Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required.2 X 6 sq. mm + 1 X 6 sq. mm earth wire.

Supplying and fixing PVC batten/ angle holder including 01 x 15W LED bulb connections etc. as required.

Supplying and fixing following socket on the existing switch box/ cover including connections etc. as required.3 pin 5/6 amp socket outlet.

Supplying and fixing following way, single pole and neutral, sheet steel, MCB distribution board, 240 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator)2 + 4 way, Double door

Supplying and fixing 5 A to 32 A rating, 240/415 V, 10 kA, "C" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required. Single pole and neutral

Supplying and fixing 5 A to 32 A rating, 240/415 V, 10 kA, "C" curve, MCB(SP) suitable for inductive load of following poles in the existing MCB DB complete with connections,testing and commissioning etc. as required.

Earthing with G.I. earth plate 600 mm X 600 mm X 6 mm thick including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe of 2.7 metre long etc. with charcoal/ coke and salt as required.

Supply, Installation,testing and commissioning of pre-wired, 20/22 Watt LED fitting, with all accessorioes complete.directly on ceiling/wall, incl connection with 1.5 sqmm FR PVC insulated, copper conductor, single core cable and earthing etc as required.

Supplying and fix LED light fitting 1 x 9W Bulk Head with all accessories suitable for single phase, 230 V, complete as required

Supply and Fixing 10 Sqmm 2 Core, 1100 volts grade heavy duty cable PVC insulated aluminium served with inner sheathing of PVC tape and over all PVC in service connection.

S &F Storage WaterHeater Capacity 50 Ltr with unplasticised P.V.C. connection pipe with PTMT Nuts, collar and bush with all connecting accessories all as directed by Engr-in-Charge.

Supplying and fixing PVC Exhaust Fan of 450 mm sweep prewired 240 volts with all acessories complete including connection with 1.5 sqmm FR PVC insulated copper conductor single core cable and earthing etc as required

Providing and fixing water closet squatting pan (Indian type W.C.pan ) with 100 mm sand cast Iron P or S trap, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required , white Vitreous china Orissa pattern W.C. pan of size 580x440 mm with integral type foot rests complete all as specified.

Providing and fixing 600x450 mm beveled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete.

Providing and fixing G.I. pipes complete with G.I. fittings and clamps, /c cutting and making good the walls etc. 15 mm dia nominal bore

Providing and fixing G.I. pipes complete with G.I. fittings and clamps,/c cutting and making good the walls etc. 20 mm dia nominal bore

Providing and fixing CP liquid soap container with bracket and its fittings of approved quality and colour, all as specified and directed

Providing and fixing CP towel rail complete with brackets with CP brass screws, approved quality and colour, 600 mm long, all as specified and directed.

Providing and fixing C.P. brass shower rose with 15 or 20 mm inlet, 100 mm diameter all as specified.

Providing and fixing CP brass bib cock of approved quality, 15mm nominal bore all as specified

Providing and fixing CP brass stop cock of approved quality, 15 mm nominal bore all as specified.

Providing and fixing ball valve (brass) of approved quality, High or low pressure, with plastic floats complete, 20 mm nominal bore all as specified.

Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require:White Vitreous China Wash basin size 630x450 mm with a pair of 15 mm C.P. brass pillar taps

Providing and placing on terrace (at all floor levels) polyethylene water storage tank capacity 1000 litre, ISI : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes including gate valve and fittings and the base support for tank.

Earth work in excavation by mechanical means (Hydraulic excavator) /manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m. All kinds of soil.

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 40 mm nominal size)

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size)

Brick work with common burnt clay modular bricks of class designation 7.5 in foundation and plinth in cement mortar 1:4 (1 cement : 4 coarse sand)

Reinforced cement concrete work in walls (any thickness), including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts etc. up to floor five level, excluding cost of centering, shuttering, finishing and reinforcement : 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20mm nominal size)

Centering and shuttering including strutting, propping etc. and removal of form for : Lintels, beams, plinth beams, girders, bressumers and cantilevers.

Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level using Thermo-Mechanically Treated bars.

Cement plaster 1:3 (1 cement: 3 coarse sand) finished with a floating coat of neat cement. 20 mm cement plaster

Providing M.S. foot rests including fixing in manholes with 20x20x10 cm cement concrete blocks 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) as per standard design : With 20x20 mm square bar

Extra for providing and mixing water proofing material in cement of plaster work in proportion recommended by the manufacturers.

Providing and fixing in position pre-cast R.C.C. manhole cover and frame of required shape and approved quality, L D- 2.5, rectangular shape 600x450 mm internal dimensions.

Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion, single socketed pipes, 110 mm diameter

Providing and fixing on wall face unplasticised - PVC moulded fittings/accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion, single tee with door, 110x110x110 mm

Providing and fixing on wall face unplasticised - PVC moulded fittings/accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion, Bend 87.5°, 110 mm bend.

Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion,single socketed pipes, 75 mm diameter

Constructing brick masonry manhole in cement mortar 1:4 ( 1 cement : 4 coarse sand ) with R.C.C. top slab with 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size), foundation concrete 1:4:8 mix (1 cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size), inside plastering 12 mm thick with cement mortar 1:3 (1 cement : 3 coarse sand) finished with floating coat of neat cement and making channels in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) finished with a floating coat of neat cement complete as per standard design : Inside size 90x80 cm and 45 cm deep including C.I. cover with frame (light duty) 455x610 mm internal dimensions, total weight of cover and frame to be not less than 38 kg (weight of cover 23 kg and weight of frame 15 kg) with sewer bricks conforming to IS : 4885 complete all as specified in drawing No MRR/Engr/115/02, sheet No 2/2 and directed.

Making soak pit 2.5 m diameter 3.0 metre deep with 45 x 45 cm dry brick honey comb shaft with bricks and S.W. drain pipe 100 mm diameter, 1.8 m long complete as per standard design with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 complete all as specified in drawing No MRR/Engr/115/02, sheet No 2/2 and directed.

Earth work in excavation by mechanical means (Hydraulic excavator) /manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m. All kinds of soil.

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 40 mm nominal size)

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size)

Reinforced cement concrete work in walls (any thickness), including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts etc. up to floor five level, excluding cost of centering, shuttering, finishing and reinforcement : 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20mm nominal size)

Reinforced cement concrete work in beams, suspended floors, roofs having slope up to 15° landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases above plinth level up to floor five level, excluding the cost of centering, shuttering, finishing and reinforcement with 1:1.5:3 (1 cement : 1.5 coarse sand(zone-III) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources).

Centering and shuttering including strutting, propping etc. and removal of form for : Lintels, beams, plinth beams, girders, bressumers and cantilevers.

Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level using Thermo-Mechanically Treated bars.

Cement plaster 1:3 (1 cement: 3 coarse sand) finished with a floating coat of neat cement. 20 mm cement plaster

Extra for providing and mixing water proofing material in cement of plaster work in proportion recommended by the manufacturers.

SCHEDULE ‘A' Part-III ((Bn HQ Lunglei))

Construction of Riflewoman Barrack of size 15M x 8M incl verandah using MS tubular structure for roof frame, coloumn,truss including wooden frame for wall and false ceiling frame work with second class hardwood and 4mm thick plywood for internal wall cladding,PCC flooring, PPGI sheet roofing and wall cladding using 0.5mm thick PPGI sheet with 40 mm x 6mm wind tie with attached toilet tank staging and 1000 litres HDPE tank all as per approved drawings with tender documents

Construction of Toilet block of size 7.2M x 2.2M, PCC Floor with Glazed floor tiles 300mm x 300mm, MS Tubular structure for roof frame, coloumn,truss with PPGI sheet roofing and wall cladding using 0.5mm thick PPGI sheet with 40 mm x 6mm wind tie all as per Approved drawings and specifications including water tank staging with 1000 litres HDPE tanks all as all as per approved drawings with tender documents

Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit/PVC Casing Caping, with piano type switch, suitable size PVC box and earthing the point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable etc. as required.

Supplying and fixing PVC box of 180mm X 100mm X 60mm deep (nominal size) on surface or in recess including providing and fixing 6 pin ,15/16 amps multipurpose socket outlet and 15/16 amps piano type switch, connection, painting etc as required.

Supplying and fixing PVC box of 150mm X 75mm X 60mm deep (nominal size) on surface or in recess including providing and fixing 3 pin 5/6 A socket outlet and 5/6 A piano type switch, connections, painting etc. as required.

Supplying and fixing 20 mm of medium class PVC conduit/casing caping along with accessories in surface/recess including cutting the wall/panel and making good the same in case of recessed conduit as required

Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit/casing caping as required. 2 X 2.5 sq. mm + 1 X 2.5 sq. mm earth wire.

Supplying and fixing 3 pin, 5 A ceiling rose on the existing junction box/ wooden block including connections etc. as required.

Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required.2 X 1.5 sq. mm + 1 X 1.5 sq. mm earth wire.

Supplying and fixing PVC batten/ angle holder including 01 x 15W LED bulb connections etc. as required.

Supplying and fixing following socket on the existing switch box/ cover including connections etc. as required.3 pin 5/6 amp socket outlet.

Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit/casing caping as required. 2 X 6 sq. mm + 1 X 6 sq. mm earth wire.

Supplying and fixing following way, single pole and neutral, sheet steel, MCB distribution board, 240 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator)2 + 4 way, Double door

Supplying and fixing 5 A to 32 A rating, 240/415 V, 10 kA, "C" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required. Single pole and neutral

Supplying and fixing 5 A to 32 A rating, 240/415 V, 10 kA, "C" curve, MCB(SP) suitable for inductive load of following poles in the existing MCB DB complete with connections,testing and commissioning etc. as required.

Earthing with G.I. earth plate 600 mm X 600 mm X 6 mm thick including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe of 2.7 metre long etc. with charcoal/ coke and salt as required.

Supply, Installation,testing and commissioning of pre-wired, 20/22 Watt LED fitting, with all accessorioes complete.directly on ceiling/wall, incl connection with 1.5 sqmm FR PVC insulated, copper conductor, single core cable and earthing etc as required.

Supplying and fix LED light fitting 1 x 9W Bulk Head with all accessories suitable for single phase, 230 V, complete as required

Supply & Fix ceiling fan 1200 mm sweep, including fan regulator & wiring connection upto ceiling rose

Wiring for 5 Amp Socket (SB) with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable with piano type switch in existing Board and earthing the point with 1.5 sq.mm. FRLS PVC insulated copper conductor single core cable etc. as required.

Supply anf Fix 10 Sqmm 2 Core, 1100 volts grade heavy duty cable PVC insulated aluminium served with inner sheathing of PVC tape and over all PVC in service connection.

Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit/PVC Casing Caping, with piano type switch, suitable size PVC box and earthing the point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable etc. as required.

Supplying and fixing PVC box of 180mm X 100mm X 60mm deep (nominal size) on surface or in recess including providing and fixing 6 pin ,15/16 amps multipurpose socket outlet and 15/16 amps piano type switch, connection, painting etc as required.

Supplying and fixing 20 mm of medium class PVC conduit/casing caping along with accessories in surface/recess including cutting the wall/panel and making good the same in case of recessed conduit as required

Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit/casing caping as required. 2 X 2.5 sq. mm + 1 X 2.5 sq. mm earth wire.

Supplying and fixing 3 pin, 5 A ceiling rose on the existing junction box/ wooden block including connections etc. as required.

Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required.2 X 6 sq. mm + 1 X 6 sq. mm earth wire.

Supplying and fixing PVC batten/ angle holder including 01 x 15W LED bulb connections etc. as required.

Supplying and fixing following socket on the existing switch box/ cover including connections etc. as required.3 pin 5/6 amp socket outlet.

Supplying and fixing following way, single pole and neutral, sheet steel, MCB distribution board, 240 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator)2 + 4 way, Double door

Supplying and fixing 5 A to 32 A rating, 240/415 V, 10 kA, "C" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required. Single pole and neutral

Supplying and fixing 5 A to 32 A rating, 240/415 V, 10 kA, "C" curve, MCB(SP) suitable for inductive load of following poles in the existing MCB DB complete with connections,testing and commissioning etc. as required.

Earthing with G.I. earth plate 600 mm X 600 mm X 6 mm thick including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe of 2.7 metre long etc. with charcoal/ coke and salt as required.

Supply, Installation,testing and commissioning of pre-wired, 20/22 Watt LED fitting, with all accessorioes complete.directly on ceiling/wall, incl connection with 1.5 sqmm FR PVC insulated, copper conductor, single core cable and earthing etc as required.

Supplying and fix LED light fitting 1 x 9W Bulk Head with all accessories suitable for single phase, 230 V, complete as required

Supply and Fixing 10 Sqmm 2 Core, 1100 volts grade heavy duty cable PVC insulated aluminium served with inner sheathing of PVC tape and over all PVC in service connection.

S &F Storage WaterHeater Capacity 50 Ltr with unplasticised P.V.C. connection pipe with PTMT Nuts, collar and bush with all connecting accessories all as directed by Engr-in-Charge.

Supplying and fixing PVC Exhaust Fan of 450 mm sweep prewired 240 volts with all acessories complete including connection with 1.5 sqmm FR PVC insulated copper conductor single core cable and earthing etc as required

Providing and fixing water closet squatting pan (Indian type W.C.pan ) with 100 mm sand cast Iron P or S trap, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required , white Vitreous china Orissa pattern W.C. pan of size 580x440 mm with integral type foot rests complete all as specified.

Providing and fixing 600x450 mm beveled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete.

Providing and fixing G.I. pipes complete with G.I. fittings and clamps, /c cutting and making good the walls etc. 15 mm dia nominal bore

Providing and fixing G.I. pipes complete with G.I. fittings and clamps,/c cutting and making good the walls etc. 20 mm dia nominal bore

Providing and fixing CP liquid soap container with bracket and its fittings of approved quality and colour, all as specified and directed

Providing and fixing CP towel rail complete with brackets with CP brass screws, approved quality and colour, 600 mm long, all as specified and directed.

Providing and fixing C.P. brass shower rose with 15 or 20 mm inlet, 100 mm diameter all as specified.

Providing and fixing CP brass bib cock of approved quality, 15mm nominal bore all as specified

Providing and fixing CP brass stop cock of approved quality, 15 mm nominal bore all as specified.

Providing and fixing ball valve (brass) of approved quality, High or low pressure, with plastic floats complete, 20 mm nominal bore all as specified.

Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require:White Vitreous China Wash basin size 630x450 mm with a pair of 15 mm C.P. brass pillar taps

Providing and placing on terrace (at all floor levels) polyethylene water storage tank capacity 1000 litre, ISI : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes including gate valve and fittings and the base support for tank.

Earth work in excavation by mechanical means (Hydraulic excavator) /manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m. All kinds of soil.

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 40 mm nominal size)

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size)

Brick work with common burnt clay modular bricks of class designation 7.5 in foundation and plinth in cement mortar 1:4 (1 cement : 4 coarse sand)

Reinforced cement concrete work in walls (any thickness), including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts etc. up to floor five level, excluding cost of centering, shuttering, finishing and reinforcement : 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20mm nominal size)

Centering and shuttering including strutting, propping etc. and removal of form for : Lintels, beams, plinth beams, girders, bressumers and cantilevers.

Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level using Thermo-Mechanically Treated bars.

Cement plaster 1:3 (1 cement: 3 coarse sand) finished with a floating coat of neat cement. 20 mm cement plaster

Providing M.S. foot rests including fixing in manholes with 20x20x10 cm cement concrete blocks 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) as per standard design : With 20x20 mm square bar

Extra for providing and mixing water proofing material in cement of plaster work in proportion recommended by the manufacturers.

Providing and fixing in position pre-cast R.C.C. manhole cover and frame of required shape and approved quality, L D- 2.5, rectangular shape 600x450 mm internal dimensions.

Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion, single socketed pipes, 110 mm diameter

Providing and fixing on wall face unplasticised - PVC moulded fittings/accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion, single tee with door, 110x110x110 mm

Providing and fixing on wall face unplasticised - PVC moulded fittings/accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion, Bend 87.5°, 110 mm bend.

Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion,single socketed pipes, 75 mm diameter

Constructing brick masonry manhole in cement mortar 1:4 ( 1 cement : 4 coarse sand ) with R.C.C. top slab with 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size), foundation concrete 1:4:8 mix (1 cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size), inside plastering 12 mm thick with cement mortar 1:3 (1 cement : 3 coarse sand) finished with floating coat of neat cement and making channels in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) finished with a floating coat of neat cement complete as per standard design : Inside size 90x80 cm and 45 cm deep including C.I. cover with frame (light duty) 455x610 mm internal dimensions, total weight of cover and frame to be not less than 38 kg (weight of cover 23 kg and weight of frame 15 kg) with sewer bricks conforming to IS : 4885 complete all as specified in drawing No MRR/Engr/115/02, sheet No 2/2 and directed.

Making soak pit 2.5 m diameter 3.0 metre deep with 45 x 45 cm dry brick honey comb shaft with bricks and S.W. drain pipe 100 mm diameter, 1.8 m long complete as per standard design with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 complete all as specified in drawing No MRR/Engr/115/02, sheet No 2/2 and directed.

Earth work in excavation by mechanical means (Hydraulic excavator) /manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m. All kinds of soil.

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 40 mm nominal size)

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size)

Reinforced cement concrete work in walls (any thickness), including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts etc. up to floor five level, excluding cost of centering, shuttering, finishing and reinforcement : 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20mm nominal size)

Reinforced cement concrete work in beams, suspended floors, roofs having slope up to 15° landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases above plinth level up to floor five level, excluding the cost of centering, shuttering, finishing and reinforcement with 1:1.5:3 (1 cement : 1.5 coarse sand(zone-III) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources).

Centering and shuttering including strutting, propping etc. and removal of form for : Lintels, beams, plinth beams, girders, bressumers and cantilevers.

Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level using Thermo-Mechanically Treated bars.

Cement plaster 1:3 (1 cement: 3 coarse sand) finished with a floating coat of neat cement. 20 mm cement plaster

Extra for providing and mixing water proofing material in cement of plaster work in proportion recommended by the manufacturers.

J R Infratech

GAWARIA INTERNATIONAL

Bidder Name

GAWARIA INTERNATIONAL