PROVN OF CERTAIN MAJOR REVENUE WORKS AND SPL REPAIRS TO CEILING/EXHAUST FANS AT AF STN PUNE

Amount

Surface excavation n.exc (not exceeding) 30 cm deep and averaging 15cm deep and getting out in soft/ loose soil complete all as specified and directed.

Surface excavation n. exc. 30cm deep and averaging 15cm deep and getting out in hard/dense soil complete all as specified and directed.

Excavating in trenches n exc 1.50 m wide and n exc 1.5 m in depth for foundation and getting out in hard/dense soil complete all as specified and directed.

Excavation in trenches not exceeding 1.5m wide and not exceeding 1.5m depth for laying of cable and foundation of poles stays and getting out in Hard / dense soil complete all as specified and directed.

Excavation in trenches not exceeding 1.5m wide and not exceeding 1.5m depth for laying of cable and foundation of poles stays and getting out in Soft / loose soil complete all as specified and directed.

Returning & filling in excavated soil including spreading, leveling, watering and well ramming in layers not exceeding 25 Cm complete all as specified and directed.

Excavating in post holes (or similar holes) each n exc. 0.50cum getting out, returning, filling and well raming earth or broken rubble mixed with earth around etc in hard/dense soil complete all as specified and directed.

Removing excavated soil to distance n.exc 50m and depositing where directed st a level n.exc 1.5m above the starting point complete all as specified and directed.

M & L for hardcore of guage n. exc. 63mm, broken stone or boulders depositied, spread and levelled in layers n. exc. 15cm thick, watered and rammed to a true surface as specified.

M & L for Sand filling including spreading and consolidation etc complete all as specified and directed.

Supply only brocken brick aggregatae for loose filling ,of gauge 80mm to 150 mm graded complete all as specified and directed.

M& L PCC 1:2:4 type B-2 (40 mm graded aggregate) as in foundation filling and mass concrete complete all as specified and directed.

M&L for PCC 1:4:8 type D-2 using 40mm graded stone aggregate as in foundations, filling and mass concrete complete all as specified and directed.

M/L PCC 1:3:6 type C2 with 40mm graded stone aggregate as in foundation or bed conc rete of manholes complete all as specified and directed.

M & L for P C C 1:5:10 type E 2 using 40 mm graded aggregate as in sub base complete all as specified and directed.

M/L PCC 1:2:4 type B1 using 20mm graded stone aggregate as in coping, benching/haunching or surface cdhannels including necessary form works complete all as specified and directed.

M&L for precast PCC solid block masonry type C2 (1:3:6) (20mm graded aggregate) straight or curved on plan exc 6 m mean radius, exc 10 cm width and set in CM (1:6) complete all as specified and directed.

M&L pre-cast cement concrete(20mm graded crushed stone aggregate) 1:3:6 type C-1 as in block masonery with solid block masonery laid dry,exc.10cm in width and setting in cement mortar 1:6 complete all as specified and directed.

M/L for PCC precast solid block masonry walling (1:5:8) Grade D5 exc 10cm width /girth in CM (1:6) complete all as specified and directed.

M&L for PCC type B1 (1:2:4) using 20 mm graded crushed aggregate in coping ,mass concrete complete all as specified and directed.

M&L for precast cement concrete Type C1, 1:3:6 (20mm graded aggregate) in landings, cover slabs (for manholes etc), chullah hoods, chhajja, water troughs, shelves and similar articles with plain faces, setting in CM 1:6, complete all as specified and as directed

M&L for RCC nominal mix type B1 (1:2:4) 20mm graded aggregate as in plinth beams complete all as specified and directed.

M&L RCC type B1 1:2:4 (20 mm grade aggregate ) in Slabs supported on walls ,beams and columns,in floors, roofs,landings, balconies, canopies,deck slabs and in shelves and the like complete all as specified and directed.

M&L R C C nominal mix type B1 (1:2:4) 20mm graded aggregate as in lintel Beams complete all as specified and directed.

Supply only integral water proofing compound

M & L brick work with sub class 'B' bricks in CM 1:6, straight or curved on plan exc 6 mtr nean radious, using old size bricks complete all as specified and directed.

M & L brick work with sub class 'B' bricks in CM 1:4, straight or curved on plan any radious in half brick thick wall using old size bricks complete all as specified and directed.

M & L for Damp Proof Course 25mm thick in Cement concrete1:2:4 type B0 (using 12.5 mm graded stone aggregate) complete all as specified and directed.

M&L Bricks; common burnt clay building bricks, sub-class ‘B’ designation 75 complete all as specified and directed.

M&L form work for rough finished concrete surfaces to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and sofits (if any) of foundations and plinth beams and similar works: verticals or to batter complete all as specified and directed.

M&L form work to soffits of suspended flat sabs such as roof slabs ,floor slabs,landings and similar works (smooth finished flat surface of cncrete) not exceding 200mm thick (Horrizontal or sloping) complete all as specified and directed.

M&L form work to fair finshed edges of concrete flats, treads breaks in floors, window cills, concrete railings, openings in concrete walls, floor and roofs n.exe 20 cm wide and sides of RCC/PCC bands in walls, horizontal or sloping and similar work exc 10cm but n exc 20 cm wide complete all as specified and directed.

M&L 2nd class hard wood fillets square, rectangular in section as in lippings fixed with nails of area exc 13Sqcm but n exc 25 Sqcm wrought complete all as specified and directed.

S & F second class hard wood 35mm thick glazed and Skelton shutters divided in to squares with plain chamfered or rounded rebated sash bars any numbers fitted with cut and mitred beads for securing glass/ gauge etc in windows/ventilators complete all as specified and directed.

M&L Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stile sand plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing complete all as specified and directed.

Supply and fix Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, suppling & fixing in opening as per specification & drawing complete all as specified and directed.

S & F mild steel tower bolts 200 mm long stove enamelled black with bright bolt complete all as specified and directed.

S&F 100mm long aluminium anodized, barrel tower bolt of extruded section complete all as specified and as directed.

S&F 300 mm long, mild steel sliding door bolts, plate type, stove enamelled black, with bright bolt not less than 12 mm dia with and including a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate complete all as specified and directed.

S&F 300mm long aluminium alloy, anodized, sliding door bolt with hasp & staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolt and sliding bolts of extruded section or cast aluminium alloy complete all as specified and directed.

S&F mild steel butt hinges, medium weight cold rolled 75mm size complete all as specified and as directed.

S & F Butt hinges MS 100 mm cold rolled powder coated complete all as specified and as directed

M & L for 100 mm long extruded aluminum alloy hingeswith gaalvanised MS hinge pin complete all as specified and directed.

300 mm, MS ordinary rat tail rod pattern springs and including roller and roller plate complete fixed complete all as specified and directed.

M & L for 150 mm Aluminum Handle cast type anodised complete all as specified and directed.

S&F 100mm size extruded aluminium alloy handles, fabricated type, anodized complete all as specified and as directed.

S & F for brass CP tubular towel rail 20mm dia, 60 cm long complete all as specified and directed.

S & F mild steel pressed handle 150 mm oval type stove enamelled black complete all as specified and directed.

S & F floor door stopper 150mm long of aluminium alloy body and tongue, anodised with hard drawn steel spring, fixed in floor complete all as specified and directed.

M&L Galvanized mild steel wire cloth, 0.56 mm nominal dia of wire and average width of aperture 1.18mm and fixed with tinned tacks, or galvanized wire staples complete all as specified and directed.

M&L mild steel TMT bars10mm dia and over, cut length, bent to shape required , including cranking , bending spirally for hooping for coloumns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed.

M &L for mild steel bars 6 mm to 8mm dia cut to length complete all as specified and directed.

All as per srl item No 55 above but 6 to 8mm dia as in stirups

S&F Rolled sections as in main and cross beams, hip and jack rafters; purlins where connected to common rafters and running fixed with angle cleats or other connecting plates of grade Fe 410 W Quality A complete all as specified and directed.

S&F Steel ventilator with top hung shutter including hinges, steel peg stay and fixed to wall complete all as specified and directed.

Aluminium window with chowkhat and shutters complete with 5mm thick tinted glass, aluminim grill ,hinges, pair of handle, tower bolts, and make good the surface for fixing of aluminium window three track frame sliding shutters with wire guage stainless steel shutter including taking down of old wooden frame with sutter, (Weight of section of chowkhat and shutter not less than 0.55 Kg/m) complete all as specified and directed.

M&L 12mm thick toughened Glass etching fixed with necessary Ozone Patch touch fittings including openable door chamfered edge polishing each door (Total 4 Nos) high quality steel handles 02 Nos , including cleats, glazing clips, screws etc floor door spring each leaf and Hydraulically regulated, designation No-3 universal type suitable for door shutter of 851 to 1000mm in width and weight between 61 to 80 Kg complete with required assesories including existing door all as specified and as directed complete all as directed by Engr-in-Charge.

S&F pre painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed.

Dismantiling floor, hearth or wall tiling including cement mortar bedding (but not backing) removing serviceable tiles to store and rubbish off the premises complete all as specified and directed.

M&L for 100mm thick cement concrete 1:2:4 type B2 using (40mm graded stone aggregate) as in floor finishing cement concrete surface even and smooth with out using extra cement, spike rolling to surfaces or making impressions of expanded metal, complete all as specified and directed.

Forming construction joint 30mm deep and 10mm wide filled with sealing compound grade 'A' complete all as specified and directed.

M&L Forming Contraction (Dummy) joints 75 mm deep x 10mm wide for plinth protection & similar work , filled with sealing compound Grade 'A' in plinth protection complete all as specified and directed.

M&L 75mm thick PCC 1:3:6 typeC-2 (using 20mm graded stone agg) as in sub base complete all as specified and directed.

M & L for 75 mm PCC 1:3:6 type C-2 using 20mm graded aggregate as plinth protection finished even and smooth with out using extra cement complete all as specified and directed.

M&L for glazed ceramic coloured tiles 300mm x 200 mm x 7 mm thick on vertical surfaces such as dado, skirting etc set & jointed in neat cement slurry & pointed in white or coloured cement over 15 mm thick plaster in CM (1:4) complete all as specified and directed.

M&L for non-skid coloured ceramic tile 7 to 8mm thick (Square/ rectangular / in joint less) area of each tile exceeding 0.11 Sqm but not exceeding 0.18 Sqm , in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the colour of tiles over 15 mm thick screed bed in CM (1:4) complete all as specified and directed.

S&F non-skid ceramic tiles coloured ( 300x300 mm) x 7 mm thick in floors set and jointed in neat cement slurry and pointed in white or coloured cement over 15mm thick screed bed in CM 1:6 complete all as specified and directed.

M&L Matt finish ceramic coloured tiles 7-8mm thick(square/rectangular) area of each tile exceeding 0.11Sqm but n.exc 0.18Sqm in floor set and jointed in neat cement slurry and pointed in coloured cement to match over and including 15mm thick screed bed in CM 1:6 complete all as specified and directed.

M&L Rendering 10mm thick in CM 1:4 externally to manholes on concrete block or cocrete surfaces and finished even and fair complete all as specified and directed.

M&L rendering 15mm thick in cm 1:4 on fair faces of brick work or concrete surface in external surfaces with using integral water proofing compound complete all as specified and directed. (WPC will be measured and paid separately)

M&L rendering 15mm thick in CM 1:6 finished even and smooth without using extra cement complete all as specified and directed.

M&L rendering 10mm thick in CM 1:6 finished even and smooth without using extra cement complete all as specified and directed.

M&L for rendering 10mm thick in CM 1:3 internally to manholes on concrete block or concrete surfaces and finished even and smooth with using extra cement complete all as specified and directed.

M&L rendering 15mm thick in cm 1:6 on fair faces of brick work or concrete surface in external surfaces with using integral water proofing compound complete all as specified and directed. (WPC will be measured and paid separately)

M&L for prepairing new plasterd surface of wall & applying three coats of white wash complete all as specified and directed.

M&L for prepairing new plasterd surface of Ceiling and applying three Coats White wash complete all as specified and directed.

M&L for applying two coats of cement base paint over a coat of primer on new surfaces of wall including preparation of surfaces complete all as specified and directed.

S&F 3 mm thick sheet glass, ordinary quality and glazing with oil putty and glazing clips in metal frame and second class hard wood beading in wooden frames in squares not exceeding 0.5 Sqm in each pane complete all as specified and directed.

S & F 3.00mm thick figured glass, pin headed type and glazing with oil putty in squares n exc 0.5 sqm in each pane complete all as specified and directed.

Hacking out old broken glass (any thickness, size, quality or description) from wooden/steel frame work, stone, concrete or brick surrounds, glazed with putty or fixed with beadings complete all as specified and directed.

M & L preparation of new wooden surface and applying two coats of synthetic enamel paint over a coat of prink primer on wood or wood based material over 10 cm width or girth complete all as specified and directed.

M&L preparation of new steel surfaced of any descripation exc 10 cm in width or girth and applying 2 coats of synthetic enamel paint over coat of red oxide primer complete all as specified and directed.

S & F 15mm dia medium grade GI tubing with all fitting and fixed to wall, ceiling or laid in floors etc complete all as specified and directed.

All as per ser Item No 83.00 above but 20mm dia.

S&F 20 mm dia Brass gate valves (brass insert) as per requirement of the site complete all as specified and directed.

M & L rotational moulded polythene water storage tank of capacity 500 ltrs (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR part I complete all as specified and directed.

S&F rotational moulded polyethylene water tanks of capacity 250 Ltr (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Pt-I complete all as specified and directed.

S&F15 dia bib tap,cast copper alloywith crutch or butterfly handle, fancy type chromium plated , screwed down , handle screwed both ends for iron pipes complete all as specified and directed.

S &F 15 mm dia pillar taps, fancy type, cast copper alloy with capstan head, chromium plated, screwed down, high pressure with or without letter 'Hot' or Cold' with long screwed shanks and fly nuts screwed for iron pipes complete all as specified and directed.

S & F 15mm dia cast copper alloy stop cock screwed down high pressure with crutch or butter fly handle screwed both ends for iron pipes complete all as specified and directed.

S & F 20mm dia cast copper alloy stop cock screwed down high pressure with crutch or butter fly handle screwed both ends for iron pipes complete complete all as specified and directed.

S&F stop valves 15 mm dia (chromium plated fancy type) , cast copper alloy, screwed down, high pressure with crutch or butterfly handles, screwed both end for iron pipe or for unions complete all as specified and directed complete all as specified and directed.

S&F15 dia Angle stop valves, fancy type chromium plated with long shank and cup cast copper alloy , screwed down high pressure with crutch or butter fly handle screwed both ends for iron pipes complete all as specified and directed.

S & F 15 mm bore bib tap standard of PTMT, any colour, high pressure screwed for iron pipe with min weight 90 gms complete all as specified and directed.

S & F 15 mm bore stop valve of PTMT any colour, high pressure screwed for iron pipe with min weight 92 gms complete all as specified and directed.

S & F 20 mm Ball valves high pressure of PTMT with epoxy coated Aluminium rod & highdensity plastic ball screwed for iron pipe and fixed in flushing cistern complete all as specified and directed. (Make : Prayag)

M & L for 32 mm waste coupling of PTMT (half or full threaded) Minium weight 45 gms) complete all as specified and directed.

S & F towel rail 600mm long of PTMT fixed with and including chrominium plated brass screws and wooden/plastic cleats (Min Wt 190 Gms) complete all as specified and directed.

S&F 15 mm dia PVC connections, 450 mm long with PTMT nuts of suitable size at two end complete all as specified and directed

S&F 15 mm dia PVC connections, 600 mm long with PTMT nuts of suitable size at two end complete all as specified and directed including taking out old one complete all as specified and directed.

PVC (SWR) pipes 110mm bore single socketed, in any length with rubber ring joints, laid in trenches or in floors complete all as specified and directed.

S & F 110mm bore PVC SWR pipe single socketed in any length with rubber ring joint fixed to wall complete all as specified and directed.

S&F PVC (SWR) 110mm bore bends any radius complete all as specified and directed.

S&F PVC (SWR) vent cowl of 75mm bore complete all as specified and directed.

PVC (SWR) 'S’ trap of 125/110 mm bore complete all as specified and directed.

PVC (SWR) floor trap75mm bore , plain with grating including jointing with solvent cement complete all as specified and directed.

M/L for PCC (1:4:8) type D2 using 40mm graded stone aggregates as in bed to drain pipes dia of 150/200mm including packing under and as and where reqd on ground condition complete all as specified and directed.

M&L for PCC 1:3:6 type C -2 bed to drain pipe incl packing under and haunching against the side of pipe after they are laid and tested up to 110 mm dia pipe complete all as specified and directed.

S&F for Rainforced concrete pipes class NP-2, laid and jointed complete with collars if required for 150mm dia pipes complete all as specified and directed.

S & F sinks with drainage board made of stainless steel 1mm thick kitchen or laboratory with plugs, washers and wastes, including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe, overall size 915x460mm bowl size 410x330x160mm complete all as specified and directed.

S & F for 32mm dia High density polyethylene (HDPE) pipes of pressure rating 6 kgf/sq. cm complete all as specified and directed.

M&L for Vitreous china squatting pan Orissa pattern size 580x440 mm white with integral foot rests (excluding flushing cistern and flush pipe).,including P trap including provision of lime concrete complete all as specified and directed.

S&F 10 ltrs capacity PVC valveless, syphonic action type, flushing cistern low/high level white with inlet ball valve, float & handle including brackets, flush pipe complete fixed all as specified and directed.

S&F chromium plated brass shower rose, 125 mm sixze with swivel joints, including fixing to steel pipe or union complete all as specified and directed.

S&F flush pipe of PVC 32mm dia for low level cistern complete all as specified and directed.

S&F Vitreous China wash basin, white, flat back, size 580x450mm white with 32mm dia waste coupling and PVC waste pipes including 15mm bore pillar tap chromium plated ,and stadard brackets complete all as specified and directed.

S&F vitreous China Wash Basin, white, flat back of size 550 x 400 mm including suitable size of CI brackets, brass chromium plated waste fittings 32 mm dia with long screw shanks and fly nuts, flange and bedded in red lead cement complete all as specified and directed.

Supply and lay 80 mm dia bore M S Pipes heavy grade with all fittings laid in floors or fixed to walls and ceilings etc complete all as specified and directed.

S & F XLPE insulated, armoured heavy duty electric cable with aluminium conductor, 1100 volts grade, 4 core cross-sectional area 25 mm complete all as specified and directed.

M & L Earthing complete with galvanisedsteel earth plate electrode 25 mm ×4 mm thick, buried directly in ground (earth pit not less than 2.25 metres deep below groundlevel) with top edge of the plate not less 'than 1.5 metres below normal ground level, connected to galvanised earth lead wire 4.0mm dia by means of bolts, nuts, checknuts and washers of galvanised iron or steel all as shown in electrical plate No. 3 connected to earthing test point all as specified or indicatedincluding testing on completion complete all as specified and directed.

M&L for sand cushioning to UG cable laid in trenches with stone dust sand complete all as specified and directed.

S & F new foot valve 80 mm dia ball type incl rubber gasket, bolts, buts complete all as specified and directed.

S& F PVC insulated and PVC sheathed industrial cable for pump motor 3 core 1100 volts of size 6 sqmm complete all as specified and directed.

Supply, install testing & commissoning complete centrifugal pump set, electric driven 3 phase, 415 volts of capacity 30 HP motor, head 56 meter ,1617 LPM ,65/80 mm,Impeller cast Iron Gland packing type complete all as specified and directed. (Suitable PCC structure required for installation of pump set shall be included in the quoted cost of pupmset ) Make :- Crompton greaves,Kriloskar

Taking down the existing surface batten type point wiring of aluminium for Light, fan, Sockets, power sockets, stair case light point complete with switch socket regulator , bracket fitting etc and making good disturbed surfaces for wall, floors etc complete all as specified and directed.

Material and labour for providing point wiring with two runs of 1.5 Sqmm multi stranded copper conductor FRLS PVC insulated single core 1100 volts grade & with one run of 1.5 Sqmm single core multi stranded copper conductor Flame retardant PVC insulated 1100 Volts grade wire for continuous earthing complete in and including PVC casing and caping with all fittings/fixture etc and open recessed type Plastic Enclosure( Plastic Switch Board ) ISI Marked (IS:14772) for housing switches / sockets all a specified and directed (a)One Fan point controlled by one regulator/switch.

Supply and fix ceiling rose surface type bakelite / PVC three terminal 65 x 50mm complete all as specified and directed.

Taking down of ceiling fan along with all fittings and deposit it to the MES store and S & F Ceiling Fan 1200 mm sweep double bearing type, 5 Star rating ,white colour, 230 volts including blades, canopy and downrod including 3 core copper electric cable connection from ceiling rose to fitting terminal complete all as specified and directed by Engineer in Charge.

S & F Fan Regulator electronic socket type , 230 V , 100 W complete all as specified and directed.

Taking down of exhaust fan along with all fittings and deposit it to the MES store and Supply & fix exhaust fan,metal body , AC single phase 230/ 240 V of size 225/230 mm sweep with louver shutter having copper bound winding including 3 core copper electric cable connection from ceiling rose to fitting terminal complete all as specified and directed by Engineer in Charge.

Taking down of exhaust fan along with all fittings and deposit it to the MES store and Supply & fix exhaust fan,metal body , AC single phase 230/ 240 V of size 300 mm sweep with louver shutter having copper bound winding including 3 core copper electric cable connection from ceiling rose to fitting terminal complete all as specified and directed by Engineer in Charge.

Taking down of exhaust fan along with all fittings and deposit it to the MES store and Supply & fix exhaust fan,metal body , AC single phase 230/ 240 V of size 450 mm sweep with louver shutter having copper bound winding including 3 core copper electric cable connection from ceiling rose to fitting terminal complete all as specified and directed by Engineer in Charge.

Taking down of existing geyser of any capacity along with all fittings and deposit it to the MES store and Supply, installation,commissioning of Electric geyser of 25 ltrs capacity electric driven single phase ,5 star rating with 2 KW glass coated heating elemant ,high density CFC free PUF insulation ,IPX-4 protection ,multi function safety valve ,protection from dry heating /over heating with all electrical connection fixed on wall with fastener ,nut bolt, washer complete and complete all as specified and directed by Engineer in Charge.

Supply and fix PVC connecting pipe heavy duty 15 mm dia , 600mm length inlet and outlet for hot and cold water with brass coupling complete all as specified and directed.

S&F in replacement of sheet metal enclosure with socket plug top , single pole and neutral enclosure with two pin earth plug and socket complete with one MCB SP of capacity 20 Amps complete all as specified and directed.

M&L for cutting wall for exhaust fan opening, the cutting must be of suitable dimension to accommodate the the exhaust fan and make good surface finish with cement plaster work. Also making of wooden frame of required size and dimension to install exhaust fan as per site condition and complete all as specified and directed by Engr-n-charge Note:- The cost of wooden frame shall be included in the quoted rate

M& L for flame proof point wiring with 2.5 sqmm single core multistranded copper conductor FRLSH PVC insulated and unsheathed cable 1100V grade conforming to IS 694 drawn through steel ERW conduit of 20 mm (external) flame proof, heavy grade ISI marked including nessary conduit accessories surface on wall, ceiling etc. including flexible metallic conduit FP grade and suitable size nipples for connect the FP junction box to light fitting & fan etc incliding 2.5 sq mm PVC insulated FRLSH copper conductor as in continous earth wire for one FLP light/ fan point controlled by one way metal clad switch of 5 amps capacity complete for one FLP light/ fan point controlled by one way metal clad switch of 15 amps capacity complete all as specified and directed.

S&F FLP - Weather proof enclosure for LED fluorescent tube light fitting suitable for 1 X20 W tube rod with all standard accessories ,cable glands , reflectors , wire guard in aluminium alloy incl. necessary fixing arrangements suitable at site & CMRI certified IP 65 protection complete all as specified and directed. MAKE : SUDHIR SWITCH GEARS PVT LTD or Equivalent makes BALIGA / ALSTHOM / GEC /CG & certified by CMRI.

S&F FLP - WP Rotary Switch with cable termination box in LM6 16 Amps single pole 240 V ON / OFF complete all as specified and directed. MAKE : SUDHIR SWITCH GEARS PVT LTD CAT NO RI / OA / 1010 - 2A /or Equivalent makes BALIGA / ALSTHOM / GEC /& certified by CMRI

S&F FLP - WP ceiling fan single phase, 230 V, AC in cast aluminium LM6 of 48 inch sweep(1200 mm) incl necessary fixing arrangements suitable at site & model bearing No CF/193 of make SUDHIR SWITCH GEARS PVT LTD /or Equivalent makes BALIGA / ALSTHOM / GEC /& certifide by CMRI complete all as specified and directed.

Supply and fix flame proof junction box with cover 3 way of entry size 20 mm and dia 80 mm complete all as specified and directed.

RANJANA CONSTRUCTIONS

santulan & Company

M/s. ANAND ENTERPRISES

Maruti Abhiyantriki