CERTAIN MISCELLANEOUS WK AND WELCOME MAINT OF OFFICERS ACCNS IN OTM AND MD ACCN AREA OF AGE B/R-I UNDER GE(N) AHILYANAGAR.

Dismantling of wrought iron or mild steel work of any description not otherwise provided for all as specified and directed.

S&F Rolled Mild Steel Roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats and painting etc confirming to Fe 410 - W (Gde E-250) quality-A,

Dismantling of Plain or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roof coverings

M&L for pre- painted galvalume aluminum zinc coating GI based manglore pattern steel sheet of any colour 0.50mm thick (total coated thickness), 550 Mpa minimum, yield strength. It shall be coated with hot dip alloy of 55% Aluminium 43.5% Zinc 1.5% Silicon and finished with resin coat on both surfaces @ 150 gm/sqm of coating (total both surfaces) having overall width and laid width as specified and shall be fixed using hot dip galvanized, self drilling and self tapping screws neoprene and EPDM washers. Penetrations and laps in sheet shall be sealed by using proper sealant profile. HDPE fillers shall be provided wherever required to close voids between sheets, sheet & fasteners etc. etc complete all as directed

M&L for pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet of any colour 0.50mm thick (total coated thickness), 550 Mpa minimum, yield strength. It shall be coated with hot dip alloy of 55% Aluminium 43.5% Zinc 1.5% Silicon and finished with resin coat on both surfaces @ 150 gm/sqm of coating (total both surfaces) having overall width and laid width as specified and shall be fixed using hot dip galvanized, self drilling and self tapping screws neoprene and EPDM washers. Penetrations and laps in sheet shall be sealed by using proper sealant profile. HDPE fillers shall be provided wherever required to close voids between sheets, sheet & fasteners etc. etc complete all as directed

M&L for pre- painted galvalume aluminum zinc coating GI based plain steel sheet of any colour 0.50mm thick (total coated thickness), 550 Mpa minimum, yield strength. It shall be coated with hot dip alloy of 55% Aluminium 43.5% Zinc 1.5% Silicon and finished with resin coat on both surfaces @ 150 gm/sqm of coating (total both surfaces) having overall width and laid width as specified and shall be fixed using hot dip galvanized, self drilling and self tapping screws neoprene and EPDM washers. Penetrations and laps in sheet shall be sealed by using proper sealant profile. HDPE fillers shall be provided wherever required to close voids between sheets, sheet & fasteners etc. etc complete all as directed.

M&L for preparing old painted surfaces by washing, rubbing down and stopping of distempered and painted surfaces and applying a coat of distemper oil emulsion on surfaces of walls / Ceiling including scaffolding at any height complete all as specified and directed by Enggineer-in-charge.

M&L for preparing old painted surfaces by washing, rubbing down and stopping of distempered and painted surfaces and applying two coat of distemper oil emulsion on surfaces of walls / Ceiling including scaffolding at any height complete all as specified and directed by Enggineer-in-charge.

M&L for complete removal of existing treatment and prepartion of surfaces including filling the cracks if any on surfaces of walls / ceiling and applying a coat of wall care putty & applying primer and scaffolding at any height complete all as specified and directed by Enggineer-in-charge.

M&L for preparing old painted surfaces by washing, rubbing down and stopping of painted surfaces and applying a coat of cement base paint on surfaces of walls including scaffolding at any height complete all as specified and directed by Enggineer-in-charge.