SPL REPAIR OF POLES AND SECURITY LIGHT IN NO 01 INF BN AT BRICHGUNJ MIL STN, SRI VIJAYA PURAM

Supplying and installation of 6 M high hot dip galvanized iron Octogonal pole 3.0mm wall thickness, with bottom size 130 mm diameter, top size 70mm diameter with 3mm thick base plate of size 200x200x12 mm, pole fabricating out of medium grade tapered pole octagonal cross section and shall be continuosly tapered with single longitudinal conforming to BSEN 100 25/100 27 with base plate Fe 410 conforming to IS 2062 of suitable thickness with provision of 4 Nos foundation bolts. The pole shall be galvanized as per IS 4759/BSEN1461 standards/housing with aluminum busbar, inbuilt junction box, complete end termination, including single luminary arm 42mm diameter, 2.6mm thick, 1 Meter long, with grouting of base plate in concrete foundation 1:2:4 concrete including excavation, earth work, refilling etc RCC foundation as recommended by OEM pole Nos shell be marked on each pole complete all as specified and as directed. Note:- (i) Every pole shall be pre-wired from Junction box to fixture with 1.5 Sqmm 3 core copper conductor sheathed wire for Phase, neutral and Earth and necessary suitable arrangement for mounting fitting on pole). (ii) Quoted rate shall include including 1A MCB SP B series,3core 1.5sqmm cable, Earth work and nessary excavation i.e reinforcement,holding down bolts, nuts, washer of suitable size etc complete as per manufactures instructions. (iii) Provision of light fittings shall be measured and pid seperately here-in-after. (iv) Contractor shall submit Drawings of Octoganal Poles&its foundation for approval of GE. (v) Rate of RCC foundation shell deemed to be inluded in quated rate .

S&F Energy saving Next Generation LED street light 70W/72W, >110lm/watt with pressure die-cast housing along with prismatic polycarbonate modular secondary lens optics for city road application with IP66 ingress protection and impact resistance of IK08. 4kv inbuilt surge and 10kv external surge protection with Top opening driver cover for easy maintenance and soft illumination effect and powder coated complete on existing GI Octogonal Pole pole of 6/7 mtr height complete all as specified and as directed. Make: cat No: TRP-409-70-57-HL2GL-NSG of Crompton or ZELA P 86L WH PO TG SD of BAJAJ or ENDURASUNDOWNSL72WLED765PASYBOTG of Havells.

S&F 6KW ASTRONOMICAL timer panel Range Conforms to IS/IEC 60947-4-1, with 32amps contactor, 40amps MCB and Timer,Provided with Protection Degree IP 54,Extended wide band (150 Vac - 300 Vac) coil, FRLS (Fire retardant low smoke) Internal wiring,In-built Short-Circuit Protection, Class H Insulation complete all as specified and as directed.

M&L for Earthing complete with galvanised steel earth plate electrode 600 x 600 x 6 mm thick buried directly in ground ( earth pit not less than 2.25 M deep below ground level) with top edge of the plate not less than 1.5 Meter below normal ground level connected to GI wire of dia 4mm as main earthing lead (upto 7.5 m length from earth electrode to test point) by means of galvanised iron or steel bolts, nuts, check nuts & GI washers and GI tubing 15 mm bore medium grade for earth lead protection up to main earth test point and including concrete pit in PCC 1:3:6, type C1, Pre-cast RCC 1:2:4, type B1, as in cover slab 54cm x 54cm x 5 cm including 8mm dia MS TMT bars @ 150 mm c/c as in reinforcement with one handle for lifting made out of 8 mm dia MS bar, wire mesh, 20 mm bore GI tubing (Light Grade) for watering and funnel, charcoal or coal and salt in alternate layers including earth work excavation in any type of soil, RFR and removal of surplus soil, electrical plate No. 3 of SSR part - I complete all as specified and as directed.

Supply, laying and testing cable XLPE Insulated ,screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 25 sq mm 4 core, complete all as specified and as directed.

Supply, laying and testing cable XLPE Insulated ,screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 10 sq mm 4 core, complete all as specified and as directed.

Excavation in trenches not exceeding 1.5 m wide and not exceeding 1.5 m deep for laying of cables, pipes, foundation for poles etc., and getting out in hard/dense soil complete all as specified and as directed.

Returning, filling in, including spreading, levelling, watering and well ramming in not exceeding 25 cm thick complete all as specified and as directed.

Removing surplus soil to a distance not exceeding 50 m and depositing where directed at a level not exceeding 1.5 m above the starting point complete all as specified and as directed.

Supply and laying of HDPE double wall corrugated pipes and including fittings such as couplers, bends, end caps etc., ISI marked of outer dia of 50mm and inner dia of 38mm polyethylene with smooth internal and profile external surface for non pressure under ground cable complete all as speciedd and as directed.