Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Tender Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹2.3 LAccepted-AOC GUDSATHU BUDGAM KASHMIR 191111 J K | BUDGAM | BUDGAM | JAMMU AND KASHMIR | 191111 | L1 | Accepted-AOC Being L1. | |
| 2 | L2₹3.6 L+₹1.3 L (55.3%)Rejected-Finance | L2 | Rejected-Finance Other than L1. | |
| 3 | Rejected-Technical | - | Rejected-Technical Rejected as the firm is not enlisted in the requisite category. |
Tender Value
₹3.4 L
EMD Value
₹6,740
Closing Date
22 Jul 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
CWE, HQ 134 Wks Engrs
HQ 134 Wks Engrs PIN- 914134 C/o 56 APO
REPAIR/ MAINT OF HT EXTERNAL ELECTRIC, REPLACEMENT OF HT CONDUCTOR AND UG CABLES AT PATTAN GRN UNDER AGE (I) CIF (K).
2023_MES_605541_1
134WE-16(T) OF 2023-24
Open Tender
Electrical and Maintenance Works
Item Rate
180 days
UNDER AGE (I) CIF (K)
As per tender documents.
9 documents required · 9 mandatory
₹300
AGE (I) CIF (K)
₹6,740
Yes
17 Aug 2023
24 Jun 2023
24 Jul 2023
24 Jun 2023
22 Jul 2023
10 Jul 2023
26 Jun 2023 - 1 Jul 2023
Amount
Excavation in trenches not exceeding 1.5mtr wide and not exceeding 1.5 mtr deep, for laying cables/ pipes/ poles/ stay etc and getting out in soft/loose soil, complete all as specified and directed.
Returning, filling in, spreading, levelling, watering and well ramming in layers not exceeding 25cm thick, complete all as specified and directed.
Removing surplus material (soil) to a distance not exceeding 50 mtr and deposited where directed at a level not exceeding 1.50 mtr above the starting point, complete all as specified and directed.
S&F in replacement of cross arms, bracings, supports, clamps and back plates fabricated from structural steel sections including nuts, bolts, washers, welding, bending cold or hot, drilling holes for bolts, in any shape or size as indicated or directed and inclusive of two coats of aluminium paint over a coat of red oxide primer, complete all as specified and directed.
S&F in replacement 11 KV outdoor type gang operated air break switch, suitable for horizontal or vertical mounting triple pole, mechanically operated, mounted on insulator and steel frame with operating mechanism worked from ground level for current rating upto 200 Amps, complete all as specified and directed.
S&F in replacement 11 KV outdoor type gang operated air break switch suitable for horizontal or vertical mounting triple pole, mechanically operated, mounted on insulator and steel frame with operating mechanism worked from ground level for current rating upto 400 Amps, complete all as specified and directed.
S&F in replacement lighting arresters expulsion type complete with all fittings, suitable for 11 KV volts and discharge capacity 65 Kilo Amps, complete all as specified and directed.
Supply, laying, testing and commissioning XLPE cable, PVC insulated, screened PVC bedded galvanised steel strip or wire armoured electric power cable, heavy duty with aluminium conductor 11000 Volts grade (earthed), of size 3 core 95 Sqmm, laid in trenches / floor / duct throgh GI pipe, complete all as specified and directed.
M&L in repair cable end jointing kit for 11 KV (Earthed) grade cable for outdoor termination, heat shrink type joint complete with jointing material and accessories suitable for 3 core XLPE armoured aluminium conductor cable of size 95 sqmm, complete all as specified and directed.
M&L for dry river sand, laid in trenches for cable protection, as 15cm thick below the cable and 8cm thick above the cable, complete all as specified and directed. Note :- Punned thickness of sand shall be measured & paid.
Supply and laying reinforced precast concrete cable cover, class HV, type 1 with peak, flat of size 300mm x 180mm x 40mm, complete all as specified and directed.
M&L for replacement 150mm bore GI tubing, light grade, fixed to poles/ walls with suitable MS clamps or laid in trenches/ culverts/ road crossing, complete all as specified and directed.
M&L for plain cement concrete 1:4:8 type D-2 (using 40mm graded crushed stone aggregates) as in foundation of pole/ stay and mass concrete including necessary form work, complete all specified and directed.
M&L for plain cement concrete 1:2:4 type B-1 (using 20mm graded crushed stone aggregates) as in coping, bands etc, rounded and chamfered on edges inlcuding necessary form work and applying two coats of white wash, complete all specified and directed.
S&F anticlimbing device spikes type, fabricated out of MS bars (round, square and flat) including nuts, bolts, washers and welding in two halves made to shape to suit the cross section of the pole, complete all as specified and directed.
S&F expulsion fuses single pole suitable for 11 KV, of capacity 25 Amps, complete all as specified and directed.
S&F in replacement danger notice plate of size 25 x 20cm for HT, made out of 1.6mm thick mild steel sheet, vitreous, enameled white with letters, figures and conventional skull and bones in signal red colour and fixed with MS clamps made of 25 x 3mm MS flat iron, bolts and nuts, complete all as specified and directed.
M&L for earthing complete with galvanised steel earth plate electrode of size 600mm x 600mm x 6.3mm thick, burried directly in ground not less than 2.25 mtr deep below normal ground level with top edge of earth plate not less than 1.5 mtr below normal ground level, connected to the Galvanised earth lead 4mm dia by means of bolts, nuts, check nuts and washers, protected by GI tube light grade of 15mm bore including provision of concrete pit in PCC 1:2:4 type B-1 with cast iron cover with frame, excavation and earth work in any type of soil, charcoal dust and salt, 20mm bore GI watering pipe of light grade with funnel and wire mesh, complete all as shown in electrical plate No 3 of MES SSR Part-I (2009) and all as directed. Notes:- (i) Main earthing lead from earth plate electrode to test point upto length of 7.5 metre shall be deemed to include in the quoted rate. (ii) On testing after completion if desired resistance is not obtained, the contractor shall redone the earthing without any extra cost to the department.
M&L for earthing with 600x600x6.30mm galvanised steel earth plate electrode, buried directly in ground (earth pit not less than 2.25mtr deep below normal ground level) with top edge of the plate at a depth of not less than 1.5 mtr below ground level, connected to and including GI strip of size 32X6mm by means of bolts, nuts and check nuts and washers of galvanised steel and 50mm dia GI light grade pipe for protection of GI strip to the extent of 7.5 mtr length as earthing lead and connecting to the eqpt, viz transformer, LT kiosk etc, including charcoal dust and salt packed all around the earth plate in the earth pit including chamber made up of PCC 1:2:4 type B-1 with MS angle iron frame and CI cover and 20mm dia light grade GI pipe from top edge of the earth plate upto MS funnel with wire mesh provided inside the concrete earth pit for watering arrangement including excavation and earth work in any type of soil and testing after completion, complete all as specified and directed. Notes:- (i) On testing after completion if desired resistance is not obtained, the contractor shall redone the earthing without any extra cost to the department.
Dismantling existing old unserviceable ACSR conductor of any size and description and S&F new ACSR conductor, stretching properly on insulators and binding with aluminium binding wire, jumpers including fixing on insulators on each pole in span and tighting with permissible sag between span etc, complete all as specified and directed.
M&L for pin type porcelain vitreous brown, white or green insulator, suitable for 11 KV HT of working pressure, size 150mm height and 150mm dia including one galvanised mild steel spindle, two galvanished iron washer and one GI nut, complete all as specified and directed.
M&L for shackle type porcelain vitreous white, brown or green insulator including one galvanised mild steel spindle, two galvanised iron washers and one galvanised iron nut, 150mm dia, 150mm height for 11000 volts grade, complete all as specified and directed.
M&L for stay assembly complete with 20mm dia stay rod with accessories, shown in electric plate No. 01 including stay clamps and including dismantling old unserviceable stay assy, complete all as specified and directed. Note :- Loop insulator, stay wire, excavation and cement concrete shall be measured and paid seperately under respective items of this BOQ.
Supply and filling fresh transformer power oil of BDV not less than 50 KV for topping up of reduced level of transformer due to evaporation / leakage / losses due to dehydration in HT 11KV distribution transformer 100 to 600 KVA and including removing / taking up old unservicable transformer oil, complete all as specified and directed.
M&L for conducting oil filtration by stream line / vacum type filter machine to remove the moisture / carbon particles to improve required BDV of oil 50 to 60 KV for 1 min for power transformer and as BDV of oil 40 to 50 KV for 1 min for distribution transformer including routine testing after filtration for any capacity of transformers / AVR / CT / PT units, complete all as specified and directed. Notes :- (a)The contractor shall change the filter assy before starting the filtration of transformer / AVR of any capacity in presence of Engr- in-Charge. (b) Necessary documention should be submitted by the contractor to Engr-in-Charge.
Notes :- An amount of Rs. 30,740.00 on account of Credit Schedule for Schedule 'A' Part-II shall be deducted from total quoted amount of BOQ to arrive at the contract sum.
M/S N A Enterprises
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .