providing and fixing fire fighting system in Vidyothma Girls Hostel in H.P. University, Shimla-5 (SH Providing Dry wet riser fire fighting system)

Amount

Providing, laying, jointing and testing in following sizes of MS class‘C’ (heavy class) pipes conforming to IS 1`239/3589 wth accessories like fittings including tees, elbows, reducrs, flanges gasket, G.I. nuts. Bolts complete with all accssories as required:a)25mm dia.

b)65mm dia.

c)80mm dia.

d)100mm dia

e)150mm dia.

Providing, Installing and commissioning of First Aid Hose reel with MS Construction spray painted in Post Offce red (swinging type Hose reel drum) conforming to IS 884 with upto date amendments complete with 30 mtr. Long and 20mm nominal internal dia heavy duty water hose thermoplastic (Teitile reinforced) type II, 20mm dia globe valve stop cock. Tetrminating with G.M. coupling & nozzle of 6mm outlet with shut off valve complete as required.

Suppling, installation, testing and commissioning of Gun metal ISI marked odlique pattern Single hydrant landing valve with 80mm dia flanged inlet and 63mm dia instantaneous type female outlet complete with gunmetal cap and G.I. chain, twist release type plug and all accessories as per IS 5290-1983 (Type ‘A’)

Providing and fixing of 63mm dia 15 mtr. Long non-percolating flexible hose (RRL-type A) as per IS: 636,Type A with Gun metal male & female instantaneous type coupling (IS:903)

Providing & fixing 63mm dia Gun metal Braneh pipe with Gun metal with 20mm (nominal internal dia) size Gun metal Nozzle with standard inlet instandenous lack type 63mm dia coupling Branch Pipe & Nozzle shall confirm IS: 903.

Providing & fixing fibre glass reinforced Fire Hose Cabinet (30”x24”x10”) out door type, made out of sheet having glazed door with 6mm thick clear glass including necessary locking arrangement with allen key, powder coating with Post Office Red Paint and for Hoseing 2 Nos RRI Hose pipe 1 No branch pipe inclludidng grounding and suitable incripting the words Hose Cabinet on the Box complete as required.

Providing Gun metal collecting head with 63mm dia instantaneous type inlet +150mm dia flanged outlet with built incheck valve for fire brigade connection to UG Tank + wet riser IS:904 specification test for 20kg/mm2 including necessary support complete in all respect. TWO WAY

Providing Cast iron/steel butterfly valve confirming to type P.N 1.6 of IS:13095-1991 complete with flanges bolt, nuts, gasket etc. As per table’E’ specification complete in all respect hydraulically test to 20 k/Sqcm. a)80mm dia.

b)100mm dia.

Providing and fixing Cast iron /steel double flanged horizontal type with gunmetal seat non return valve confirming to class-1 of IS: 5312 including nuts, bolts, 1.5mm thick compressed asbestos gasket as per table "E" and specifications complete in all respect. a)100mm dia

Providing, fixing, testing and commissioning of MS air cushion tank on top of each riser fabricated form 6mm thick MS plate 250mm in diameter and 1.2m in height with dished ends fabricated from 8mm thick MS plate with air release valve with stop cock flanged inlet connection and drain arrangement with 25mm dia valve pressure gauge with gun metal stop cock complete with all accessories as required and including all lead and lift.

Supply, Installing, testing and commissioning of 25mm dia gate valve with all accessories as required.

Providing and fixing of IS marked IS 15683) portable fire extinguisher, carbondioxide type flat base inocuding valve,discharge hose of not less than 10mm dia 1 M long & complete in all respects including initial fill with CO2 gas confirming to IS:15222 filled to a filling ratio of not more than 0.667 and wall suspension bracket (IS:MARK) 4.5 KG.

Providing and fixing Water CO2 9 Lltres type fire extinguishers consisting of seamiless cylindrcal body, squeeze lever discharge valve fitted with pressure indicarting guage internal discharge tube,30 cms long high pressure discharge hose, discharge nozzle, suspension bracket, confirming to IS: 15683finished externally with red enamel paint and fixed to wall with brackets complete with Intrnal charge (IS:MARK)

Providng,fixing,,testing and commissioning of 15mm dia chorme furnished sprinkler head with quartz type bulb set to operate at 68 degree complete as per specification, sprinkler to be installed using wrench for each type of sprinkler up right type automatic sprinkler (UL Listed)

Supply, Installation, Testing and commission of mannul call point with chain hammer (Break glass unit) in 16 SWG sheet complete with push button switch including making necessary connectons as approved and directed by the Engneer –in- Charge.

supply, Installation, Testing and commission of Ahuja/Agni or equivalent make wall mounted speaker/hooter(Medium intensity) with 4 watt speaker (16 SWG MS Sheet),complete including making necessary connections as approved and directed by the Engneer –in- Charge .

Supply, Installation, Testing and commission of Micro processor make control panel8 zone for Alarm system having Facility of Fire indications fauld condition system with backup power supply 2 Nos battries of 7 AH 12 volt wikth automatic dual battery charger operating from 220 V , SO HZ Single phase AC main adequate for operation of systm connecting to the 24 hours in the horizontal state followed by 30 minutes including painting the panel paint of Red Shade as per local fire laws as approved and directed by the Engneer –in- Charge .

Suppljy and drawng fllowing size of PVC insuled heat resistant flame retardant (HRFR) and low smoke single core (flexible) copper conductor cable to existing surface/ recessed PVC as required. a)2x1.5 Sqmm

Suppljy and drawng following size of PVC conduit along with the accessories in surface/recess including cutting the wall and making good the same in case of recessed conduit as required 25mm dia.

TARUN FIRE SYSTEM

AVINASH FIRE PROTECTION SYSTEM