8507 SPECIAL REPAIR TO BLDG NO T-11(A) AND T-12 AND INTERNAL BOUNDARY WALL AT AFMC UNDER GE (CENTRAL) PUNE

Amount

Dismantling timber scantlings under 40 Sqcm in section as in fillets, rails, posts, rafters, purlins etc complete all as specified and directed.

Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and directed.

S & F Rolled mild steel sections as in main and cross beams, hip and jack rafters; purlins where connected to common rafters and running rails and guides for sliding doors; fixed with angle leats or other connecting plates , Fe 410 -W (Gde- E- 250) quality-A complete all as specified and directed.

S & F Steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I. S.1161- 1979 grade St.-240 including one coat shop primer complete all as specified and directed.

S & F Prepainted Manglore pattarn galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering / cladding to wall, fixed with self tapping screws as specified including dismantling old Asbestos cement (corrugated ,semi-corrugated, etc.) sheets in roof coverings complete all as specified and directed.

S & F Prepainted galvalume aluminum zinc coating GI based plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering / cladding to wall, bent to shape fixed with self tapping screws including dismantling old Asbestos cement (corrugated, semicorrugated etc.) sheets in roof coverings complete all as specified and directed.

S & F false ceiling using Non Asbestos (Fiber cement) decorative tiles of Size 595mm x 595mm x 4mm thick including GI snap grid of size (600mm x 600mm) using hot dipped galvanised steel section, exposed surface with pre-coated capping main Tee of size 24mm x 38mm x 0.5mm thick at every 1200mm center to center maximum and rotary stitched cross tee of size 24mm x 32mm x 0.5mm thick at 1200mm center to center and wall angle of size 19mm x 19mm x 0.5mm thick fixed to the periphery of the wall. The above grid is suspended at every 1200mm center to center in both directions using 2.0mm thick pre-straightened GI wire on main runners including making niches for fans / light complete including Dismantling Wall and ceiling boards (fibre, pulp, insulation, etc.) or insulation boards / slabs / blankets, any thickness, including cover fillets complete all as specified and directed.

Brickwork with fly ash bricks, straight or curved on plan exc 6m mean radius, built in 1:3 including dismatling old masonary built in CM complete all as specified and directed.

M & L for precast cement concrete block masonry exceeding 10cm in width with solid blocks of PCC (1:5:8) grade D-5 and setting in CM 1:6 including dismantling of brick or stone / boulders masonry, built in cement mortar including all quoins, arches, pillars etc. but excluding ashlars facing, dressed stone work and precast concrete articles complete all as specified and directed.

M & L for 15mm thick rendering in CM 1:4 over brick / concrete wall surfaces, trowelled to even & smooth without using extra cement complete all as specified and directed.

Dismantling of stone slab or tiles in any description or thickness, laid bedded jointed in any morter complete all as specified and directed.

Material and labour (Full body) Virified Ceramic tiles (any shade) of size 600mm x 600mm x 8 to 9mm thick (square/ rectangular) polished as in floor set and jointed in neat cement slurrry and pointed in white or coloured cement to match, over & including 15mm thick screed bed in CM 1:6 including dismantling of existing floor tiling including cement mortar bedding (but not backing) and removing debris out side of defence land complete all as specified and directed.

All as per item No 12 above but as in skirting over & including 10mm thick backing coat of CM 1:4 on concrete or cement plaster surfaces including dismantling of existing hearth or wall tiling including cement mortar bedding (but not backing) and removing debris out side of defence land complete all as specified and directed.

Material and labour for Joint free Non skid coloured ceramic tiles (Matt finish) of size 300mm x 300mm x 7 to 8mm thick (Square / rectangular) over & including 15mm thick screed bed in CM 1:6 in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the tiles including dismantling of existing floor tiling including cement mortar bedding (but not backing) and removing debris out side of defence land complete all as specified and directed.

M & L glazed ceramic coloured, designer & pattern (dark & light shade combination) tiles in 450 x 300 x 7-8 mm thick on vertical surfaces set and jointed in neat cement slurry and pointed in white or coloured cement to match including 10mm thick backing coat in cement mortar 1:4 on brickwork or stone masonary surfaces including dismantling of existing hearth or wall tiling including cement mortar bedding (but not backing), removing debris out side of defence land and complete all as specified and directed.

M & L for 18 to 20mm thick Marble stone slab of white shade as in flooring laid and jointed with grey cement slurrry mixed with pigments to match the shade of the slab including rubbing and mirror polishing over and including 15mm thick screed bed in CM 1:6 complete all as specified and directed ..

M & L 18 to 20mm thick granite (Telephonic black) work table rubbed and polished in steps, jambs, pillars, window cills, cooking platforms, floor / skirting / risers or as in vertical support or counter top for wash basin and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixtures of pigment to match with shade of granite over and including 15 mm thick screed layer in CM 1:3 with edges polished / rounded as ordered incuding cutting circular or eliptical hole in granite slab and fixing in position complete and ensure best adhesion to surface complete all as specified and as directed.

M & L for 20 to 25mm thick Machine cut Kota stone of size 400 x 550mm (minimum) as in flooring laid and jointed with grey cement slurrry mixed with pigments to match the shade of the slab including rubbing and mirror polishing over and including 15mm thick screed bed in CM 1:6 complete all as specified and directed.

M & L for rendering 15mm thick in CM 1:6 on fair faces of brick work or concrete surfaces finished the surface even and smooth without extra cement including taking down cement plaster on stone / Brick walls including raking out joints, hacking for key, scrubbing down with water complete all as specified and directed.

M & L for preparation of newly plastered surfaces of walls and applying two coats of oil bond distemper over a coats of alkali resistant primer over & including one coat wall care putty complete all as specified & directed .

M & L for preparation of newly plastered surfaces of walls and applying two coats of weather proof exterior acrylic emulsion paint @ 1.67 Ltr/10 Sqm (1st Quality) of required shade (Company Depot Tinted) with silicon additives over and including a priming coat of exterior primer applied @ 2.20 kg/10 Sqm on surfaces of walls complete all as specified and directed. Note :- (a) Exterior acrylic emulsion paint shall be Anti-fungal, dust resistant, water repellant, crack-bridging, weather proof type 1st Quality. (c) Item shall be executed through company's authorised approved Applicator and Contractor shall give Guarentee for 5 years for effectiveness of paint on Rs 100/- non judicial stamp paper.

M & L Complete removal of existing treatment of wall and applying two coats of oil bond distemper over a coats of of primer over & including one coat wall care putty complete all as specified & directed ..

M & L for preparation of old decorative surfaces of walls and applying two coats of weather proof exterior acrylic emulsion paint @ 1.67 Ltr/10 Sqm (1st Quality) of required shade (Company Depot Tinted) with silicon additives complete all as specified and directed. Note :- (a) Exterior acrylic emulsion paint shall be Anti-fungal, dust resistant, water repellant, crack-bridging, weather proof type 1st Quality. (c) Item shall be executed through company's authorised approved Applicator and Contractor shall give Guarentee for 5 years for effectiveness of paint on Rs 100/- non judicial stamp paper.

Taking down Chowkats or frames with shutters (without taking of shutters from the frame) exc 1.50 Sqm but not exc 4.00 Sqm & removing from site complete all as directed.

Taking down Chowkats or frames with shutters (without taking of shutters from the frame) area not exc 1.50 Sqm & removing from site complete all as directed.

Taking down shutter of any descriptio area exc 1.00 Sqm & not exc 2.00 Sqm each leaf & removing from site complete all as directed.

S & F 30mm thick Flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides with lipping / frame to match complete all as specified and directed.

S & F 100mm long Stainless Steel hinges all as specified and directed.

S & F 150mm long Aluminium powder coated barrel tower bolt of extruded section all as specified and directed.

Supply and fix 150mm long Extruded aluminium powder coated handles, fabricated type,all as specified and directed.

S & F 300mm long Aluminium powder coated sliding door bolt with hasp staple (bolt type) and fixing clips of sheet cast or extruded section and fixing bolts and sliding bolts of extruded section or cast aluminum alloy all as specified and directed..

Supply and fix in repair 150mm floor door stopper of aluminium body and tongue anodised with hard drawn steel spring fixed in floor over all length of cover plate all as specified and directed..

Supply & fix in repair Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and as directed.

S & F Powder coated anodised aluminium frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc complete all as specified and as directed. (Note :- Minimum thickness of powder coating 50 Micron)

S & F Powder coated aluminium door shutters, (single / double leaf) aluminium section weighing not less than 0.55 Kg/Mtr including necessary joining cleats, glazing clips, rubber neoprene packing, handles 2 Nos in each door, hinges, anodised aluminum snap beading screws etc complete all as specified and as directed. (Note :- Glass pane shall be measured and paid sepertely under relevant item)

S & F Powder coated Anodised aluminium window and ventilator shutters, fixed type without sash bar, aluminium section weighing 0.55 Kg/Mtr including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws etc. complete all as specified (Min thickness of powder coating 50 micron) complete all as specified and as directed. (Note :- Glass pane shall be measured and paid sepertely under relevant item)

S & F Stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and as directed.

S & F door closer (aluminium extuded body section) hydreulically regulated, ,designation No 1 universal type, suitable for door shutters up to 700mm in width and of wieght not more than 35 Kg complete all as specified and as directed.

S & F 100mm mild steel 4 Lever mortice lock, vertical type complete all as specified and as directed.

S & F Framed work such as grills, gratings, etc. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe - 290 Grade - E - 165 including welding etc complete all as specified and as directed.

Material & Labour for providing and fixing stainless steel (Grade 304) railing made of hollow tubes, channels, plates etc, including welding, grinding, buffing, polishing and making curvature (where ever required) and fitting the same with necessary stainless steel nuts and bolts complete, including fixing the railing with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc., of required size, on the top of floor or the side of waist slab with suitable arrangement complete all as specified and as directed.

M & L for preparation of new or previously untreated steel surfaces of any description, not otherwise described over 10cm in width or girth and applying two coat of synthetic enamel paint over one coat of red oxide or zink chrome primer complete all as specified and as directed.

M & L for preparation of new or previously untreated wooden surfaces of any description, not otherwise described over 10cm in width or girth and applying two coat of synthetic enamel paint over one coat of pink primer complete all as specified and as directed.

M & L 75mm thick Cement concrete type D-2, 1:4:8 using 40mm graded stone aggregates as in sub base course complete all as specified and as directed.

Demolition cement concrete (Unreinforced) in roofs, floors (other than ground floors), beams, staircases, landing, chajjas and similar suspended work complete all as directed.

M & L RCC M-25 (Design mix) using 20mm graded stone aggregate as in Beams, bands, cantilevers, lintels, columns pillars, piers, posts, struts, chullah hoods, stair case, arches, domes, vaults, shell roofs, arch ribs, folded plates, slabs, balconies, canopies, deck slabs etc or in similar articles complete all as specified and directed.

Use & Waste Formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including supports, overhangs etc also splays between floors and beams etc fair finished the surfaces of concrete complete all as specified and directed.

M & L for Mild steel TMT bar 10mm dia and over cut to length bent to shape required incudingl cranking, bending , spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed.

All as per item No 50 above but 5mm dia and over upto and including 10mm dia as in stirrups, spacers and binders complete all as specified and directed.

Cutting openings, through brick walls built in cement mortor for door, window and other openings or enlarging existing openings. converting window into door openings etc or cutting out defective brick work for under pinning, including providing, fixing and removing shoring, cleaning and stacking bricks, removing surplus serviceable bricks, hard core etc to store and rubbish off the premisses not exc 50 Mtr all as directed.

Forming jambs etc to openings (to foregoing item), including cutting, toothing and properly bonding into old work, also facing, jointing and pointing to match existing work in Cement mortar 1:4 complete all as specified and directed.

S & F in repair Vitreous China wash down water closet pan (pedestal pattern), white with P or S trap with and including plastic water closet seat cover & jet spray , connection to trap, flushing pipe & anti-syphonage pipe, (excluding flushing cistern and flush pipe) connected to drain & making good to floor complete all as specified and directed.

S & F in repair 10 Ltr capacity PVC valveless, syphonic action type, flushing cistern, low level, white, with inlet, ball valve, float and handle including brackets and flush pipe complete all as specified and directed.

S & F in repairs Vitreous china Wash Hand Basin Counter Top (over or under counter) Oval shape of Size 560mm x 470mm excluding pillar taps & waste pipe but including Waste coupling chromium plated complete all as specified and directed.

S & F in repairs 15mm bore dia stop cock / angle cock, cast copper alloy chromium plated , fancy type, screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipe or for union and fixed complete all as specified and directed.

S & F in repairs 15mm bore dia bib taps cast copper alloy with crutch or butterfly handle, chromium plated, fancy type , screwed down, screwed for iron pipe or for brass ferrule and fixed complete all as specified and directed.

Supply and fix in repairs 15mm bore dia Bib taps two way type , cast copper alloy with crutch or butterfly handle, chromium plated, fancy type, screwed down, screwed for iron pipe or for brass ferrule complete all as specified and directed.

S & F in repairs chromium plated, Health faucet spray with 1.5 Mtr long flexible cord with hose and hook complete all as specified and directed.

Supply and fix in repairs 15mm bore dia swan neck pillar taps , cast copper with capstan head, chromium plated, fancy type, screwed down high pressure with or without lettered 'hot' and 'cold' with long screwed shank and fly nut for iron pipe complete all as specified and directed.

S & F in repairs PVC connections 15mm size with PTMT nuts to length 450 mm complete all as specified and directed.

S & F Brass, Chromium plated, Tubular towel rail, 20mm dia, 'D' type, 60cm long between flanges complete all as specified and directed.

Cutting chases, pinning in, making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc and cutting chases for concealed water tubing or concealed conduit wiring, etc., and making good, cutting not exc 10cm girth all as directed.

Supplying, Fix and laying 15mm bore dia CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings fixed to walls / ceiling or laid in floors / trenches including all required fittings such as (Brass Tee, Brass Elbow, Brass Male / Female threaded adaptor, Brass Union) including taking down steel / CPVC / UPVC tubing complete complete all as specified and directed.

Supply and fix in repairs 75mm bore dia outlet PVC (SWR) floor trap / Nahani trap, plain with grating with SS grating with or without holes including jointing with solvent cement & making good the disturbed surface with PCC 1:2:4 or CM 1:3 complete all as specified and directed.

S & F in repairs 20mm bore dia harrison rails (Curtain rod / drapery rod) , stainless steel with and including fency type stainless bracket / wall to wall 02 Nos in each opening and stainless steel side stopper fency type of required shape and size 2 Nos of each opening complete all as specified and directed.

S & F 18 / 19mm BWR grade plywood with decorative face laminates on both sides of 1.00mm thick, high glossy, on woooden frame / lipping pati etc incl all necessary arragement complete all as specified and directed. Make: Action tesa, Century, Kitply.

S & F Autocado steel hinges for cupboard shutters complete all as specified and directed.

S & F 75mm stainless steel Hasp and staple, safety type, mild steel hinge pin including bolt to hinge plate and fixed with screws complete all as specified and directed.

S & F Ball catches with 8mm dia steel ball, and brass body and striking plate including letting in and fixed complete all as specified and directed.

Complete removal of existing old bitumenous tarfelt (water proofing treatment) including cement screed bed and PCC padding and clean the surface with wire brush and washing with water to achive the original surface of slab complete all as specified and directed.

M & L water proofing treatment to RCC roof slab, walls, chajjas etc, shall be carried out as specified below and as directed by Engr-in-charge.:- (a) M & L for 10 mm thick plaster screed bed layer in CM 1:3 on concrete surfaces by using Liquid Water proofing chemical @ 200ml per bag of cement.. (b) Preparing plastered surfaces of roof slab, walls, chajjas etc, by brooming with broom sweeping free from dirt dust etc and evenly applying one coat of oil based cold bituminous primer @ 0.70 Kg per Sqm of area complete all as specified. (c) Laying 3mm thick APP polymer modified approved membrane, non woven, polyster, weighing not less than 3.6 Kg/Sqm with laps and overlaps as specified and joints sealed and applied complete by torch application method all as specified and directed by Engr-in-charge. (d) Finally applying a coat of solar reflective bituminous aluminium paint @ 0.15 ltr/Sqm on the top of membrane surfaces complete including removal of existing old bitumenous tarfelt (water proofing treatment) including cement screed bed and PCC padding and clean the surface with wire brush and washing with water to achieve the original surface of slab all as spd and directed all as specified and as directed by Engr-in-charge.

Supply only Liquid Waterproofing chemicals.

S & F 12mm thick toughen glass as in doors / opening / partion including all stainless steel patch fittings including all necessary fixing arangement complete all as specified and directed.

Taking down copper/ aluminium point wiring (light, fan, sockets ot power) complete including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets light fittings etc and making good disturbed surfaces of walls, floors etc all as directed.

Taking down main switches / DBs of any make and type including teakwood board, MCBs / MCCBs etc complete and making good the disturbed surfaces including colour wash complete all as directed.

M & L for point wiring of any length using approved colour coding as per IS with stranded copper conductor 1.50 Sqmm (Nominal area), single core, PVC insulated and unsheathed stranded FRLSH cable 1100 Volts grade ISI-694 marked in Non Metalic PVC rigid conduits heavy duty ISI marked totally concealed in wall / floor /roof including all accessories etc with Modular sunken boxes including modular frame/ cover plate suitable for mounting switches/ sockets etc and PVC insulated stranded copper conductor 1.5 Sqmm single core cable as earth and connecting to common earth dolly complete all as specified for the following. : - Note : (i) Cutting in chases and pointing in will be done by contractor without any cost to the Govt. Rates quoted by the contractor shall deemed to be included of above provision. (ii) Making good of disturbed surfaces matching with existing finished will be done by contractor without any extra cost to the Govt.

(a) One light controlled by one, one way switch complete all as specified.

(b) Two light controlled by one, one way switch complete all as specified.

(c) Four light controlled by one. one way switch complete all as specified

(d) One fan point controlled by one, one way switch complete all as specified

(e) One 5 pin , 5 Amps socket outlet point controlled with other switches on same board including earth wire complete all as specified.

(f) One 5 pin 5 Amps socket outlet point controlled by one, one way switch on independent board complete all as specified.

All as per item No 79 above but with 2.50 Sqmm (Nominal area) single core, PVC insulated and unsheathed stranded FRLS H cable 1100 Volts grade ISI-694 ISI marked including PVC insulated stranded copper conductor 2.50 Sqmm single core cable as earth and connecting to common earth dolly complete all as specified for one 15 Amps sockets outlet point on independent board Note : (i) Cutting in chases and pointing in will be done by contractor without any cost to the Govt. Rates quoted by the contractor shall deemed to be included of above provision. (ii) Making good of disturbed surfaces matching with existing finished will be doneby contractor without any extra cost to the Govt.

S & F modular switch 6 Amps, SP, one way, 230 Volts, white / ivory finish complete all as specified .

S & F modular switch 6 Amps / 16 Amps, SP one way, 230 Volts, white / ivory finish complete all as specified.

S & F modular socket outlet 2/3 pin, 6 Amps, multipurpose, 2 module 230 Volts ,single pole, one way suitable for plug tops complete all as specified.

S & F modular socket outlet, 2/3 pin 16 Amps, multipurpose , 2 module, 230 Volts, single pole, one way suitable for plug tops complete all as specified .

S & F ceiling rose bakelite type three terminals PVC / polycarbonate, isolated body ISI marked complete all as specified.

S & F Modular type stepped type electronic fan regulator (1 to 5 step) all as specified .

S & F 240V single pole and neutral enclosure with a two pin and earth plug and socket with including one 20 Amps single pole MCB complete all as specified.

M & L for sub main wiring complete with two single core 2.50 Sqmm 1100 Volts grade PVC insulated stranded copper conductor FRLS H cable with continuous copper earth conductor of 2.50 Sqmm drawn in and including Non-metallic PVC rigid conduits of suitable size totally concealed in walls / floors etc including all accessories complete all as specified and as directed. Note : (i) Making good of disturbed surfaces will be done by contractor without any cost to the Govt. (ii) 2 Runs of 2.50 Sqmm conductor , one run of 2.50 Sqmm earth conductor and one run of PVC conduit shall be measured as one unit length.

M & L for sub main wiring complete with two single core 4.00 Sqmm 1100 Volts grade PVC insulated stranded copper conductor FRLS H cable with continuous copper earth conductor of 4.00 Sqmm drawn in and including Non-metalic PVC rigid conduits of suitable size totally concealed in walls / floors etc including all accessories complete all as specified and as directed. Note : (i) Making good of disturbed surfaces will be done by contractor without any claims (ii) 2 Runs of 4.00 Sqmm conductor , one run of 4.00 Sqmm earth conductor and one run of PVC conduit shall be measured as one unit length.

M & L for sub main wiring complete with two single core 6.00 Sqmm 1100 Volts grade PVC insulated stranded copper conductor FRLS H cable with continuous copper earth conductor of 6.00 Sqmm drawn in and including Non-metalic PVC rigid conduits of suitable size totally concealed in walls / floors etc including accessories complete all as specifiedand as directed. Note : (i) Making good of disturbed surfaces will be done by contractor without any claims (ii) 2 Runs of 6.00 Sqmm conductor , one run of 6.00 Sqmm earth conductor and one run of PVC conduit shall be measured as one unit length.

S & F MCB TPN DB, 4 way double door with 200 Amp rated busbar, 240 Volts complete all as specified.

S & F MCB TPN DB, 12 way double door with 200 Amp rated busbar 240 Volts complete all as specified.

S & F for MCB Single pole rated capacity 6 to 40 Amps, 240 Volts complete all as specified.

S & F for MCB double pole rated capacity 6 to 40 Amps, 240 Volts complete all as specified.

S & F for MCB four pole of rated capacity 40 to100 Amps 240 Volts complete all as specified.

S & F in replacement of round recessed mounted Edge-lit-technology for plare free light 25 KV voltage surge protection housing made from egineering plastic with in built driver power factor > 0.9 operating voltage range 100-300 Volts AC unique designed unabled by a separate modular surface rim convert from recessed to surface mounting in round shape 18 Watt LED downlighter of white / neutra / white / warm white color tempreature as per site requirement etc 3 core prewired and all accessories complete all as specified and directed.

S & F in replacement LED street light with pressure die-cast housing along with prismatic polycarbonate diffuser and LED with secondary optic and IP-65 protection 30 Watt complete with all accessories and wall mounting bracket of suitable size including clamps nut etc prewired 3 core flexible wire complete all as specified and as directed,

S & F fermo LED focus light of capacity 3 Watt WH / WW complete with all accessories internally prewired 3 core flexible wire complete all as specified and as directed.

S & F focus track LED light of capacity 12 Watt WW / WH / NW complete wirh all accessries internally prewired 3 core flexible wire complete all as specified and as directed.

S & F corvus cob / spot light 24'' LED light of capacity 12 watt WW / WH / NW complete wirh all accessoried internally prewired 3 core flexible wire complete all as specified andas directed.

M & L in replacement for earthing with galvanised steel earth plate electrode 60cm x 60cm x 6mm buried directly in ground earth pit not less than 2.25 Metre deep below normal ground level with top edge of the earth plate vertically to depth of not less than 1.50 Metre below ground level connected to and including GI wire 4mm dia and GI pipe 15mm bore dia light grade for protection upto the extent of 7.50 Metre as earthing lead by means of GI bolts and nuts etc connecting to equipment with provn of charcoal and salt etc all as per electrical plate No 3 of SSR Part-I including RCC cover and MS angle iron frame, watering arrangement with GI pipe 20mm dia and MS funnel, concrete pit including excavation and earth work in any type of soil and testing on completion etc complete all as specified. (Note : GI earth wire and 15mm bore dia GI protection pipe light grade upto 7.5 Mtr from earth plate is deemed to be included in quoted rate.)

PRANAV ENTERPRISES

REKHA ELECTRICALS

Parhar Enterprise

GS Associates

Gauri Associates

Suma Construction

M/s.BAJRANG CONSTRUCTION

ANIL CONSTRUCTION CO.