Fabrication, Erection, Testing and Commissioning of External Piping of Effluent Treatment Plants of NFC-Kota

Amount

Supply of Structural Steel Supply of Structural Steel ie angles/channels/I beams and sheet of varying sizes conforming to IS:2062 (vizag Steels/Tata/Sail) including transporting to site N.B.: (1) The contractor has to submit valid material test certificates for the MS structures.

FABRICATION OF STRUCTURAL STEEL WORKS & PAINTING: A. Transportation from storage point to work site/work shop, Cutting, fabricating using welding/bolts, weld rods (D & H, Advani, Philips, Esab) and /or bolt and nuts, anchor fastners from approved source, erecting and fixing in position using derricks/pullies or any other suitable means, etc., either inside plant building/ in yard, at all elevations generally as indicated in the relevant drawings or as per the requirement/instructions of the engineer incharge. B. Fabrication, erection(at all elevations) of pipe supports like shoes, cradles, hangers, clamps (of all sizes/thicknesses manufactured by forming method using die), turn buckles, saddles, guides, special supports, pads (including corrosion pads & protection shields), providing and welding of stiffeners as per drawings, T post etc. of all types including supply of required anchor fastners for erection, and completing work as per drawings, specifications and instructions of Engineer-incharge. Modifications/rectifications, if required; and adjustment/ alignment during precommisioning, commisioning as per the instructions of Engineer-incharge. C. Painting of MS structurals with two coats of Enamel paint make, over one coat of approved red oxide zinc chromate primer/compatible primer & Finish 1 Coat of Polyurathane Finish Paint (PU) of Asian Paint, Berger, Johnson and Nickelson, Pedilite, Nerolac make approved shade, cleaning the sections by suitable means, etc., complete for pipe support horizontal and vertical trustles, brackets, etc., all as per specifications and as directed by the Engineer-in charge.

FABRICATION OF PIPING SPECIALS FROM PIPES (SUPPLIED BY NFC), ERECTION AND TESTING: Transportation of all piping items from Owner's storage point to work site/work shop; fabrication including cutting, edge preparation, (inclusive of grinding the edges of pipe, pipe spools, fittings, flanges etc. to match with the mating edges of uneven/different thickness wherever required); fitup, bending, preheating wherever required, welding, threading, reinforcing pads for pipe connection (wherever required) and laying of pipes and pipe spools (spools along with supports) of all types and thickness over sleepers, overhead on racks and at all elevations, hook-ups with existing piping, connecting with equipment nozzles, strainers, steam traps, orifice assemblies, spray nozzles, rotameters, tappings for pressure gauges, thermowells, sample connections, and fixing of gaskets, bolts, nuts including application of torque wherever required & all other inline instruments and fittings, like elbows, reducers, tees, flanges, spectacle blinds and spacer&blinds, piping specials such as mitres and fabricated fittings, vents, drains (but excluding reinforcing pads), Supply and placement of SS sacrificial pad plates, Supply & welding of Strip to all pipes before hydro-testing at exit points of Units for earthing purpose; alignment, cleaning & flushing by water/compressed air, hydrostatic, pneumatic, vacuum, spark testing and any other type of testing as specified draining, drying by compressed air, performing Positive Material Identification(PMI) using alloy analysers, completing all such works in all respects including supply of all necessary consumables, labour, supervision etc. as per the specifications, drawings and instructions of Engineer-in-Charge. FABRICATION (FILLET WELD)- 15NB TO 40NB

FABRICATION OF PIPING SPECIALS FROM PIPES (SUPPLIED BY NFC), ERECTION AND TESTING: Transportation of all piping items from Owner's storage point to work site/work shop; fabrication including cutting, edge preparation, (inclusive of grinding the edges of pipe, pipe spools, fittings, flanges etc. to match with the mating edges of uneven/different thickness wherever required); fitup, bending, preheating wherever required, welding, threading, reinforcing pads for pipe connection (wherever required) and laying of pipes and pipe spools (spools along with supports) of all types and thickness over sleepers, overhead on racks and at all elevations, hook-ups with existing piping, connecting with equipment nozzles, strainers, steam traps, orifice assemblies, spray nozzles, rotameters, tappings for pressure gauges, thermowells, sample connections, and fixing of gaskets, bolts, nuts including application of torque wherever required & all other inline instruments and fittings, like elbows, reducers, tees, flanges, spectacle blinds and spacer&blinds, piping specials such as mitres and fabricated fittings, vents, drains (but excluding reinforcing pads), Supply and placement of SS sacrificial pad plates, Supply & welding of Strip to all pipes before hydro-testing at exit points of Units for earthing purpose; alignment, cleaning & flushing by water/compressed air, hydrostatic, pneumatic, vacuum, spark testing and any other type of testing as specified draining, drying by compressed air, performing Positive Material Identification(PMI) using alloy analysers, completing all such works in all respects including supply of all necessary consumables, labour, supervision etc. as per the specifications, drawings and instructions of Engineer-in-Charge. FABRICATION (BUTT WELD)- 25NB TO 100NB

FABRICATION OF PIPING SPECIALS FROM PIPES (SUPPLIED BY NFC), ERECTION AND TESTING: Transportation of all piping items from Owner's storage point to work site/work shop; fabrication including cutting, edge preparation, (inclusive of grinding the edges of pipe, pipe spools, fittings, flanges etc. to match with the mating edges of uneven/different thickness wherever required); fitup, bending, preheating wherever required, welding, threading, reinforcing pads for pipe connection (wherever required) and laying of pipes and pipe spools (spools along with supports) of all types and thickness over sleepers, overhead on racks and at all elevations, hook-ups with existing piping, connecting with equipment nozzles, strainers, steam traps, orifice assemblies, spray nozzles, rotameters, tappings for pressure gauges, thermowells, sample connections, and fixing of gaskets, bolts, nuts including application of torque wherever required & all other inline instruments and fittings, like elbows, reducers, tees, flanges, spectacle blinds and spacer&blinds, piping specials such as mitres and fabricated fittings, vents, drains (but excluding reinforcing pads), Supply and placement of SS sacrificial pad plates, Supply & welding of Strip to all pipes before hydro-testing at exit points of Units for earthing purpose; alignment, cleaning & flushing by water/compressed air, hydrostatic, pneumatic, vacuum, spark testing and any other type of testing as specified draining, drying by compressed air, performing Positive Material Identification(PMI) using alloy analysers, completing all such works in all respects including supply of all necessary consumables, labour, supervision etc. as per the specifications, drawings and instructions of Engineer-in-Charge. ERECTION- 25NB TO 100NB

INSTALLATION OF VALVES :- Transportation of all types of valves (Including MANUAL, PNEMATIC, NRV, STRAINER, FOOT VALVES ETC.) from Owner's storage points to contractor's stores/worksite and installation of valves for all rating including assembly of valves accessories like air bottles etc, if any, fixing of gaskets bolts/nuts wherever required as per specification, drawings and directions of Engineer-in Charge SIZE-15NB

INSTALLATION OF VALVES :- Transportation of all types of valves (Including MANUAL, PNEMATIC, NRV, STRAINER, FOOT VALVES ETC.) from Owner's storage points to contractor's stores/worksite and installation of valves for all rating including assembly of valves accessories like air bottles etc, if any, fixing of gaskets bolts/nuts wherever required as per specification, drawings and directions of Engineer-in Charge SIZE-20NB

INSTALLATION OF VALVES :- Transportation of all types of valves (Including MANUAL, PNEMATIC, NRV, STRAINER, FOOT VALVES ETC.) from Owner's storage points to contractor's stores/worksite and installation of valves for all rating including assembly of valves accessories like air bottles etc, if any, fixing of gaskets bolts/nuts wherever required as per specification, drawings and directions of Engineer-in Charge SIZE-25NB

INSTALLATION OF VALVES :- Transportation of all types of valves (Including MANUAL, PNEMATIC, NRV, STRAINER, FOOT VALVES ETC.) from Owner's storage points to contractor's stores/worksite and installation of valves for all rating including assembly of valves accessories like air bottles etc, if any, fixing of gaskets bolts/nuts wherever required as per specification, drawings and directions of Engineer-in Charge SIZE-32NB

INSTALLATION OF VALVES :- Transportation of all types of valves (Including MANUAL, PNEMATIC, NRV, STRAINER, FOOT VALVES ETC.) from Owner's storage points to contractor's stores/worksite and installation of valves for all rating including assembly of valves accessories like air bottles etc, if any, fixing of gaskets bolts/nuts wherever required as per specification, drawings and directions of Engineer-in Charge SIZE-40NB

INSTALLATION OF VALVES :- Transportation of all types of valves (Including MANUAL, PNEMATIC, NRV, STRAINER, FOOT VALVES ETC.) from Owner's storage points to contractor's stores/worksite and installation of valves for all rating including assembly of valves accessories like air bottles etc, if any, fixing of gaskets bolts/nuts wherever required as per specification, drawings and directions of Engineer-in Charge SIZE-50NB

INSTALLATION OF VALVES :- Transportation of all types of valves (Including MANUAL, PNEMATIC, NRV, STRAINER, FOOT VALVES ETC.) from Owner's storage points to contractor's stores/worksite and installation of valves for all rating including assembly of valves accessories like air bottles etc, if any, fixing of gaskets bolts/nuts wherever required as per specification, drawings and directions of Engineer-in Charge SIZE-65NB

INSTALLATION OF VALVES :- Transportation of all types of valves (Including MANUAL, PNEMATIC, NRV, STRAINER, FOOT VALVES ETC.) from Owner's storage points to contractor's stores/worksite and installation of valves for all rating including assembly of valves accessories like air bottles etc, if any, fixing of gaskets bolts/nuts wherever required as per specification, drawings and directions of Engineer-in Charge SIZE-80NB

INSTALLATION OF VALVES :- Transportation of all types of valves (Including MANUAL, PNEMATIC, NRV, STRAINER, FOOT VALVES ETC.) from Owner's storage points to contractor's stores/worksite and installation of valves for all rating including assembly of valves accessories like air bottles etc, if any, fixing of gaskets bolts/nuts wherever required as per specification, drawings and directions of Engineer-in Charge SIZE-100NB

RADIOGRAPHY :- Performance of radiographic inspection on piping of all types & thicknesses including providing or hiring of all necessary equipment and whatever else even though not expressly mentioned but required to perform the work as per specifications and instructions of Engineer-in-Charge. Radiographs shall be submitted to the Engineer-in-charge. (Repeat Radiography due to defective radiograph on repaired joints due to Contractor's fault and for additional radiography necessitated due to poor performance of contractor's welders shall be done at contractor's cost) All Sizes 25 NB to 100 NB

DYE PENETRATION TEST : Performance of magnetic particle/ dye penetrant test including supply of all necessary materials, equipment and labour for carrying out the work as per specification and directions of Engineer-in-Charge DPT for All Size 25 NB to 100 NB

MODIFICATION/EXTRA WORKS (IF ANY) :- Cutting, bevelling, fitup, welding of different sizes of CS/AS/SS/Higher Alloy piping of all types and thicknessess in shop, in position, on ground/overhead on rack and at all elevations; transportation of pipes, fittings, flanges etc from owner's storage point to work site/ work shop, making necessary scaffoldings, consumables, machinery, tools, tackles, labour and supervision including attending repairs for completing the work as per the instruction of Engineer-in-charge. FLAME CUTTING S.S PIPING

MODIFICATION/EXTRA WORKS (IF ANY) :- Cutting, bevelling, fitup, welding of different sizes of CS/AS/SS/Higher Alloy piping of all types and thicknessess in shop, in position, on ground/overhead on rack and at all elevations; transportation of pipes, fittings, flanges etc from owner's storage point to work site/ work shop, making necessary scaffoldings, consumables, machinery, tools, tackles, labour and supervision including attending repairs for completing the work as per the instruction of Engineer-in-charge. HACKSAW CUTTING S.S PIPING

MODIFICATION/EXTRA WORKS (IF ANY) :- Cutting, bevelling, fitup, welding of different sizes of CS/AS/SS/Higher Alloy piping of all types and thicknessess in shop, in position, on ground/overhead on rack and at all elevations; transportation of pipes, fittings, flanges etc from owner's storage point to work site/ work shop, making necessary scaffoldings, consumables, machinery, tools, tackles, labour and supervision including attending repairs for completing the work as per the instruction of Engineer-in-charge. FITUP & WELDING S.S PIPING

MODIFICATION/EXTRA WORKS (IF ANY) :- Cutting, bevelling, fitup, welding of different sizes of CS/AS/SS/Higher Alloy piping of all types and thicknessess in shop, in position, on ground/overhead on rack and at all elevations; transportation of pipes, fittings, flanges etc from owner's storage point to work site/ work shop, making necessary scaffoldings, consumables, machinery, tools, tackles, labour and supervision including attending repairs for completing the work as per the instruction of Engineer-in-charge. BEVELLING S.S PIPING

REMOVAL ERECTED PIPING(ABOVE GROUND) :- Removal of piping existing/ erected including valves for modification as required as per Drawings/P&IDs/instructions of Engineer-in-charge at all elevations, including providing assistance to owner for draining, cleaning and purging of the lines to be removed , unbolting of flanged joints /cutting of pipe lines wherever required, installation of flanges and blind flanges, removing supports, all fittings and flanges, instruments etc, cutting of pipes in appropriate length for transporting purposes, cleaning, flushing, drying and transporting all materials to storage point(within the complex battery limits) designated by Owner/EIL including stacking of material and disposing of waste etc as instructed by Engineer-in-charge. S.S PIPING

DISMANTLING AND RE-ERECTION OF VALVES: Debolting / Dismantling / dropping of all types & ratings of erected valves viz. Manual Valves, PV, NRV and re-erection at all elevation/location, installation & tightening of gaskets, bolts nuts by consumable, tools and tackles etc. & complete the work in all respect as per the drawing, instruction of owner's / Engineers-in-Charge. UP to 100 NB

OPENING & BOXING-UP OF PIPING / EQUIPMENT FLANGES & BLINDING OF FLANGESJOINTS: Box-up of flange joints with or without Blinds by providing required scaffoldings / temporary supports / mechanical jacks at all locations and elevation, engaging manpower, tools & tackles, tightening Torque wrench/ Tensioner (wherever torque tightening is required ), lapping Paste, including issuing and transportation of bolts, nuts and gaskets and from owner store, cleaning of mating surfaces of flanges, lapping of flanges where ever required, removal of temporary gaskets / studs, nuts /test blinds installed by others and completing the work in all respect as per specification, drawing and instruction of owner / engineer in charge.) FLANGE ASSEMBLY 20 NB

OPENING & BOXING-UP OF PIPING / EQUIPMENT FLANGES & BLINDING OF FLANGESJOINTS: Box-up of flange joints with or without Blinds by providing required scaffoldings / temporary supports / mechanical jacks at all locations and elevation, engaging manpower, tools & tackles, tightening Torque wrench/ Tensioner (wherever torque tightening is required ), lapping Paste, including issuing and transportation of bolts, nuts and gaskets and from owner store, cleaning of mating surfaces of flanges, lapping of flanges where ever required, removal of temporary gaskets / studs, nuts /test blinds installed by others and completing the work in all respect as per specification, drawing and instruction of owner / engineer in charge.) FLANGE ASSEMBLY 25 NB

OPENING & BOXING-UP OF PIPING / EQUIPMENT FLANGES & BLINDING OF FLANGESJOINTS: Box-up of flange joints with or without Blinds by providing required scaffoldings / temporary supports / mechanical jacks at all locations and elevation, engaging manpower, tools & tackles, tightening Torque wrench/ Tensioner (wherever torque tightening is required ), lapping Paste, including issuing and transportation of bolts, nuts and gaskets and from owner store, cleaning of mating surfaces of flanges, lapping of flanges where ever required, removal of temporary gaskets / studs, nuts /test blinds installed by others and completing the work in all respect as per specification, drawing and instruction of owner / engineer in charge.) FLANGE ASSEMBLY 40 NB

OPENING & BOXING-UP OF PIPING / EQUIPMENT FLANGES & BLINDING OF FLANGESJOINTS: Box-up of flange joints with or without Blinds by providing required scaffoldings / temporary supports / mechanical jacks at all locations and elevation, engaging manpower, tools & tackles, tightening Torque wrench/ Tensioner (wherever torque tightening is required ), lapping Paste, including issuing and transportation of bolts, nuts and gaskets and from owner store, cleaning of mating surfaces of flanges, lapping of flanges where ever required, removal of temporary gaskets / studs, nuts /test blinds installed by others and completing the work in all respect as per specification, drawing and instruction of owner / engineer in charge.) FLANGE ASSEMBLY 50 NB

OPENING & BOXING-UP OF PIPING / EQUIPMENT FLANGES & BLINDING OF FLANGESJOINTS: Box-up of flange joints with or without Blinds by providing required scaffoldings / temporary supports / mechanical jacks at all locations and elevation, engaging manpower, tools & tackles, tightening Torque wrench/ Tensioner (wherever torque tightening is required ), lapping Paste, including issuing and transportation of bolts, nuts and gaskets and from owner store, cleaning of mating surfaces of flanges, lapping of flanges where ever required, removal of temporary gaskets / studs, nuts /test blinds installed by others and completing the work in all respect as per specification, drawing and instruction of owner / engineer in charge.) FLANGE ASSEMBLY 80 NB

OPENING & BOXING-UP OF PIPING / EQUIPMENT FLANGES & BLINDING OF FLANGESJOINTS: Box-up of flange joints with or without Blinds by providing required scaffoldings / temporary supports / mechanical jacks at all locations and elevation, engaging manpower, tools & tackles, tightening Torque wrench/ Tensioner (wherever torque tightening is required ), lapping Paste, including issuing and transportation of bolts, nuts and gaskets and from owner store, cleaning of mating surfaces of flanges, lapping of flanges where ever required, removal of temporary gaskets / studs, nuts /test blinds installed by others and completing the work in all respect as per specification, drawing and instruction of owner / engineer in charge.) FLANGE ASSEMBLY 100 NB

EARTHING OF Equipments: Supply, installation and connection of following GI earthing strip along the cable trenches or cable trays or fixing to walls or structures including welding at joints, providing anti-corrosive paint or bitumen and jute covering for welded portion, clamping and necessary hardware for connecting, etc., including all labour and materials, as per approved drawings, specifications of this tender and directions of Engineer-in-Charge. 40 x 5 mm

EARTHING OF Equipments: Supply, installation and connection of following GI earthing strip along the cable trenches or cable trays or fixing to walls or structures including welding at joints, providing anti-corrosive paint or bitumen and jute covering for welded portion, clamping and necessary hardware for connecting, etc., including all labour and materials, as per approved drawings, specifications of this tender and directions of Engineer-in-Charge. 25 x 3 mm

EARTHING OF Equipments: Supply and connecting individual equipment to the earth strip or earth plate with following sizes of G.I. wire / G.I. wire rope including the supply of G.I. wire /G.I. wire rope, lugs, conductors, connecting to the G.I. strip or earth plate and necessary hardware for connection, including all labour and materials, as per approved drawings, specifications of this tender and directions of Engineer-in-Charge. 3/8" dia (10 mm) flexible rope.

EARTHING OF Equipments: Supply and connecting individual equipment to the earth strip or earth plate with following sizes of G.I. wire / G.I. wire rope including the supply of G.I. wire /G.I. wire rope, lugs, conductors, connecting to the G.I. strip or earth plate and necessary hardware for connection, including all labour and materials, as per approved drawings, specifications of this tender and directions of Engineer-in-Charge. 5/8" dia (16 mm) flexible rope.

EARTHING OF Equipments: Supply and connecting individual equipment to the earth strip or earth plate with following sizes of G.I. wire / G.I. wire rope including the supply of G.I. wire /G.I. wire rope, lugs, conductors, connecting to the G.I. strip or earth plate and necessary hardware for connection, including all labour and materials, as per approved drawings, specifications of this tender and directions of Engineer-in-Charge. 8 SWG GI Wire.

SUPPLY OF ITEMS FOR PIPING(TO BE SUPPLIED BY CONTACTOR) All supplied items shall be supplied as per specification of the tender along with material test certificate and test reports (wherever applicable) Seamless SS 304L tube size 1/4 inch thickness 1mm (min) including suitable connectors and jointer

SUPPLY OF ITEMS FOR PIPING(TO BE SUPPLIED BY CONTACTOR) All supplied items shall be supplied as per specification of the tender along with material test certificate and test reports (wherever applicable) Fastners- Stud with Nuts & Spring Washer (1Set = 1Stud + 2Nuts + 2 Spring washer all SS316) size - M14X60 SS316

SUPPLY OF ITEMS FOR PIPING(TO BE SUPPLIED BY CONTACTOR) All supplied items shall be supplied as per specification of the tender along with material test certificate and test reports (wherever applicable) Fastners- Stud with Nuts & Spring Washer (1Set = 1Stud + 2Nuts + 2 Spring washer all SS316) size - M14X65 SS316

SUPPLY OF ITEMS FOR PIPING(TO BE SUPPLIED BY CONTACTOR) All supplied items shall be supplied as per specification of the tender along with material test certificate and test reports (wherever applicable) Fastners- Stud with Nuts & Spring Washer (1Set = 1Stud + 2Nuts + 2 Spring washer all SS316) size -M14X70 SS316

SUPPLY OF ITEMS FOR PIPING(TO BE SUPPLIED BY CONTACTOR) All supplied items shall be supplied as per specification of the tender along with material test certificate and test reports (wherever applicable) Fastners- Stud with Nuts & Spring Washer (1Set = 1Stud + 2Nuts + 2 Spring washer all SS316) size -M14X90 SS316

SUPPLY OF ITEMS FOR PIPING(TO BE SUPPLIED BY CONTACTOR) All supplied items shall be supplied as per specification of the tender along with material test certificate and test reports (wherever applicable) Fastners- Stud with Nuts & Spring Washer (1Set = 1Stud + 2Nuts + 2 Spring washer all SS316) size -M14X100 SS316

SUPPLY OF ITEMS FOR PIPING(TO BE SUPPLIED BY CONTACTOR) All supplied items shall be supplied as per specification of the tender along with material test certificate and test reports (wherever applicable) Fastners- Stud with Nuts & Spring Washer (1Set = 1Stud + 2Nuts + 2 Spring washer all SS316) size -M16X80 SS316

SUPPLY OF ITEMS FOR PIPING(TO BE SUPPLIED BY CONTACTOR) All supplied items shall be supplied as per specification of the tender along with material test certificate and test reports (wherever applicable) Fastners- Stud with Nuts & Spring Washer (1Set = 1Stud + 2Nuts + 2 Spring washer all SS316) size -M16X90 SS316

SUPPLY OF ITEMS FOR PIPING(TO BE SUPPLIED BY CONTACTOR) All supplied items shall be supplied as per specification of the tender along with material test certificate and test reports (wherever applicable) Fastners- Stud with Nuts & Spring Washer (1Set = 1Stud + 2Nuts + 2 Spring washer all SS316) size -M16X100 SS316

SUPPLY OF ITEMS FOR PIPING(TO BE SUPPLIED BY CONTACTOR) All supplied items shall be supplied as per specification of the tender along with material test certificate and test reports (wherever applicable) 3 mm thick PTFE gasket suitable for 15 mm SORF Flange as per ASME B16.5 CL 150#

SUPPLY OF ITEMS FOR PIPING(TO BE SUPPLIED BY CONTACTOR) All supplied items shall be supplied as per specification of the tender along with material test certificate and test reports (wherever applicable) 3 mm thick PTFE gasket suitable for 20 mm SORF Flange as per ASME B16.5 CL 150#

SUPPLY OF ITEMS FOR PIPING(TO BE SUPPLIED BY CONTACTOR) All supplied items shall be supplied as per specification of the tender along with material test certificate and test reports (wherever applicable) 3 mm thick PTFE gasket suitable for 25 mm SORF Flange as per ASME B16.5 CL 150#

SUPPLY OF ITEMS FOR PIPING(TO BE SUPPLIED BY CONTACTOR) All supplied items shall be supplied as per specification of the tender along with material test certificate and test reports (wherever applicable) 3 mm thick PTFE gasket suitable for 32 mm SORF Flange as per ASME B16.5 CL 150#

SUPPLY OF ITEMS FOR PIPING(TO BE SUPPLIED BY CONTACTOR) All supplied items shall be supplied as per specification of the tender along with material test certificate and test reports (wherever applicable) 3 mm thick PTFE gasket suitable for 40 mm SORF Flange as per ASME B16.5 CL 150#

SUPPLY OF ITEMS FOR PIPING(TO BE SUPPLIED BY CONTACTOR) All supplied items shall be supplied as per specification of the tender along with material test certificate and test reports (wherever applicable) 3 mm thick PTFE gasket suitable for 50 mm SORF Flange as per ASME B16.5 CL 150#

SUPPLY OF ITEMS FOR PIPING(TO BE SUPPLIED BY CONTACTOR) All supplied items shall be supplied as per specification of the tender along with material test certificate and test reports (wherever applicable) 3 mm thick PTFE gasket suitable for 65 mm SORF Flange as per ASME B16.5 CL 150#

SUPPLY OF ITEMS FOR PIPING(TO BE SUPPLIED BY CONTACTOR) All supplied items shall be supplied as per specification of the tender along with material test certificate and test reports (wherever applicable) 3 mm thick PTFE gasket suitable for 80 mm SORF Flange as per ASME B16.5 CL 150#

SUPPLY OF ITEMS FOR PIPING(TO BE SUPPLIED BY CONTACTOR) All supplied items shall be supplied as per specification of the tender along with material test certificate and test reports (wherever applicable) 3 mm thick PTFE gasket suitable for 100 mm SORF Flange as per ASME B16.5 CL 150#

HINDUSTAN CONSTRUCTION CORPORATION

Digicon Engineers India Private Limited