Supply, delivery, installation and commissioning of submersible pumping machinery alongwith allied Electro-Mechanical works at P.H. No.III under Tildanga ground water based w/s scheme under Dist. 24Pgs(N) under EMSD-I, PHE Dte.

Amount

Supply delivery at site of Submersible pumping machinery directly coupled with water proof suitable size motor having following specification and as per NIT specification : DISCHARGE : 30 cubic mtr./Hr. HEAD : 41 Mtr. *N.B. (A) H/Q characteristic curve chart of pump set should be submitted before delivery. (B) Test Certificate of pump & motor should be submitted during delivery.

Supply delivery at site of 2.5 Sq. mm. 3 core, water proof flat copper cable. Make - Finolex/Gloster/any other approved make.

Supply delivery at site of 63 Amp. TPN, 415V, main switch with rewireable type fuse link in sheet steel enclosure.

Supply and delivery at site of 80 mm dia 3 mtr long UPVC standard type column pipe [cream color] with both side threaded and one end side socketed with registered KPMG and as per specification of NIT

Supply and delivery at site of 80 mm dia 1.5 mtr long UPVC standard type column pipe [cream color] with both side threaded and one end side socketed with registered KPMG.

Supply and delivery at site of 80mm dia CI top & bottom adopter.

Supply and delivery at site of Heavy type suitable dia MS suspension clamp along with nuts bolts and washer.

Supply and delivery at site of 80mm dia CIDF sluice valve as per releavant IS.

Supply and delivery at site of 80mm dia Non Return Valve as per releavant IS.

Supply and delivery at site of 80mm CIDF 90⁰ bend.

Supply and delivery at site of 80mm CIDF 1.5ft.long short piece.

Supply and delivery at site of Heavy type 250mm dia split type tube well cover with 12 mm thick clamping arrangement including holes of column pipe, air pipe and cable entry .

Supply and delivery at site of Pressure gauge [Make- H. Guru/Febig] 102 mm. dia [0-7 kg/Sq.cm] brass cock and fitting complete [ This cost includes 15 mm. dia G.I. pipes and specials]

Supply and delivery at site of Anti snapping safety device for pump set by supplying suitable size MS clamps two sets and nylon rope of required length including supplying of nuts, bolts and all other materials.

Supply delivery at site of Depth gauge 100mm dia with steel air pipe of required length with all accessories for the above work including supply of good quality hand pump [This cost includes 15 mm. dia G.I. pipes and specials

Supply & delivery at site of M.S. fabricated outdoor type kiosk box with hinge type front door cover made of 2mm thick CRCA sheet and suitable locking arrangement & Painting by powder coated paint over a coat of primer after scraping properly (Size - 4' x 2' x 1').

Installation of all items as mentioned in Sl.No.1 to 17 including construction of Pump foundations, pipe supports, valve supports, laying of cables with necessary jointing materials, earthing arrangement of motors, starters, including supply of all erection items viz. rubber gaskets, nuts & bolts etc., including cost of welding etc. as required for complete installation upto entire satisfaction of EIC.

Earthing with 50 mm dia. G.I. pipe, 3.65 mm thick & 3mtrs long (2 sets) and conn. by 25x 6 mm G.I. strip ( for reqd length) upto the earth bus-clamp with the equipments on wall/floor with staplesburied inside as reqd. at site and with 25 mm x 6mm GI flat strip to earth electrode pipe,fastening with 13mmx80mm G.I bolts,nuts,washers, including all f & f of materials & filling & restoring the surface by ramming &making suitable earthpit with brick structure & MS lid on top as per direction.

Painting of the installation (viz. pumps,valves, pipe lines etc. by two coats of epoxy paint (colour to be decided by EIC) over a coat of primer as per NIT specifiaction & direction of EIC.

Testing & Commissioning of the entire installation to the entire satisfaction of E.I.C.

Operation & guarding of the pumping machinery with full satisfaction of EIC. 90 Days x 02) =180 Days.

Add: GST @ 18%

Add: LWC @ 1%

DEY ENTERPRISE (BID ID -6197831)

MAA TARA ENTERPRISE (BID ID -6183195)