Development of Cattle Pound/Goushalla at Nagrota, Jammu (Allied works)

Amount

Earth work in bulk excavation by mechanical means (hydraulic excavator) over areas(exceeding 30 cm in depth, 1.5 m in width as well as 10 m2 on plan) including disposal of excavated earth lead upto 50 meters and lift upto 1.5 m, as directed by Engineer-in-Charge. All kinds of soil

Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with 1:5:10 (1 cement : 5 coarse sand : 10 graded stone aggregate 40 mm nominal size)

Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size)

Providing and laying in position specified grade of reinforced cement concrete includingcuring but excluding the cost of centering, shuttering, finishing and reinforcement. All works upto plinth level in 1:1½:3 (1 cement : 1½ coarse sand : 3 graded stoneaggregate 20 mm nominal size)

Centering and shuttering including strutting, propping etc. and removal of form work for Foundations, footings, bases for columns

Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level Thermo-Mechanically Treated bars of grade Fe-500D or more.

Brick work with common burnt clay (non-modular) bricks of class designation 7.5 in foundation and plinth including curing in : Cement mortar 1:6 ( 1 cement : 6 coarse sand)

Half brick masonry with common burnt clay (non-modular) bricks of class designation7.5 in foundations and plinth including curing in : Cement mortar 1:4 ( 1 cement : 4 coarse sand)

Extra for half Brick masonry in superstructure above plinth level upto floor V level

Demolishing cement concrete manually/by mechanical means including disposal of material within 50 meters lead as per direction of Engineer-incharge:1:3:6 or richer mix (i/c equivalent design mix)

Providing and laying damp-proof Course 50 mm thick with cement concrete 1:2:4 (1cement:2 coarse sand: 4 graded stone aggregate 20 mm nominal size) and curing complete

Providing and laying 12mm thick Cement plaster in mortar mix 1:4

6 mm cement plaster to ceiling of mix 1 : 3 (1 cement : 3 fine sand)

Structural steel work in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete welded

Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting , hoisting , fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete Hot finished welded type tubes

Providing and fixing G.I. chain link fabric fencing of required width inmesh size 50x50 mm including strengthening with 2 mm dia wire or nuts,bolts and washers as required complete as per the direction of Engineer-incharge.Made of G.I. wire of dia 4 mm

Providing and fixing of Aluminium shutters to Motor Room (1’-6” x 5’-0”) using Powder coated 14 guage Aluminium including frame with Aluminium Partition of approved brand With handle 100mm and lock of approved mark

Providing and fixing of Concertine coil fencing with required dia 610mm having 15 No round per 6mtr length 1 upto 2.4 Mtr or 3mtr aparl and 9 horizontal K3 T Tier with GI barbed wire tied to angle or bolted to angle or complete as per the direction of Engineer-in-charge)

Making Holes to Iron flats and angle by drilling machine for high tightening of barned wire and coiled extra

Supply and laying of stones hand packed in concrete incl. ramming, compacting, grouting with fine sand complete incl. carriage

Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20 cm in depth, consolidating each deposited layer by ramming and watering, lead upto 50 m and lift upto 1.5 m.

Painting steel work with deluxe multi surface paint of required shade to give an even shade. Two or more coats applied @ 0.90litre/10sqm over an under coat of primer applied @ 0.80litre/10sqm of approved brand and manufacture

Finishing walls with water proofing cement paint of required shade on New work (two or more coats applied @ 3.84 kg/10sqm)

Providing and fixing G.I. pipes complete with G.I. fittings excluding trenching and refilling etc. (external work) 50 mm dia. nominal bore

Providing and fixing G.I. pipes complete with G.I. fittings excludingtrenching and refilling etc. (external work) 20 mm dia. nominal bore

Making connection of G.I distribution branch with G.I main of following size by providing and fixing Tee in cutting and threading the pipe extra 25 x40mm dia

Making connection of G.I distribution branch with G.I main of following size by providing and fixing Tee in cutting and threading the pipe extra 50 x 80mm dia

Providing and fixing of value with complete fitting 2” dia

Providing and fixing of value with complete fitting 1’-3/4” dia valve

Providing and fixing of PVC liquid Manuor tank 15mm thick layer with complete fitting 1100 Ltr capacity of approved brand.

Providing and fixing of Air additance value for tank

Providing and fixing of PVC Pipe in Supreme Quality 100mm heavy weight

Providing and fixing of 3 H.P Electric Motor of make Crompton, Sharp, Havells etc (Complete Job)

Making Soakage pit 2.5 m diameter 3.0 meter deep with 45x45 cm dry brickhoney comb shaft with common burnt clay (non modular) bricks of S.W drain pipedesignation 7.5 bricks and S.W. drain pipe 100 mm diameter, 1.8 m longcomplete as per standard design

Deep drilling of 125mm dia bore hole upto 90 mtr BGL and above as per the strata encountered incl. installation, testing and commissioining of mark-II hand pump as per IS specified by using ODEX method. The job incl. extraction of casing pipe if any required during drilling work and construction of plateform as per UNICEF design

Const of Pump set assembling 32mm dia extra deep

Cost of ERWMS casing pipe 125mm dia mimimum thickness 5.4mm

Cost of Additional riser pipe

Cost of Additional connecting rod

Wiring for light Points\Fan points\exhaust fan points with 1.5mm copper conductor cable with recessed\ surface PVC conduit (modular switch) as required of approved brand as per the direction of Engineer-in-charge

Wiring for circuit wiring with 25mm sq. with PVC conductor as required of approved brand as per the direction of Engineer-in-charge

Providing ang fitting of MCB box 6-32 Amp of approved brand as per the direction of Engineer-in-charge

Providing and fitting of SPN 63 Amp of approved brand as per the direction of Engineer-in-charge

Providing ang fitting of 20Amp socket outlet on 20 Amp Switch of approved brand as per the direction of Engineer-in-charge

Service line 2x16 mm sq. AL of approved brand as per the direction of Engineer-in-charge

Gel earthing for existing electric connection

Supply and fixing of set type fan regulator (Khaitan, orient, Havells)

Providing and fitting of ceiling fan (Khaitan, orient, Havells)

Carriage of materials by Mechanical Transport a) Sand for 10 Kms

b) Bajree for 15 Kms

c) Stone Aggregate for 10 Kms

d) Bricks for 15 Kms

e) Stone for 20 Kms

f) Earth filling 200 Mtr Average

Ashok Kumar Gupta

RAVINDER KUMAR GOVT CONTRACTOR

ANIL MEHTA