Fabrication, manufacture, supply, erection, testing and commissioning of 33KV SS with 2X8 MVA PrTr, associated equipments, accessories, control panels, control room and civil works at Tirunelveli medical college.

Amount

WORKS DETAILS

SUBSTATION - CIVIL WORKS

SUBSTATION -ELECTRICAL WORKS

33 KV SOURCE LINE WORKS

11 KV LINK LINE WORKS

Description of Work / Item(s)

Amount

SUBSTATION CIVIL WORKS

Soil Investigation by augar upto the depth of 10 m or upto refusal strata where N - Value is obtained 50/100 whichever met earlier. Conducting penetration test at the change of layer and as specified interval of 1m to 1.5 m, carrying out lab test as per IS standards, providing report with recommendation for foundation including mobilization, demobilization, shifting from location to location, water charges for drilling, etc complete with submission of two sets of report for one bore hole including 18% GST.

Designing of Control room footing for required depth, type of footing, dimension of footing, Detailing of reinforcement etc according to the soil investigation report including preparation and submission of design report 3 sets for approval, etc. complete. Including 18% GST.

Clearing juliflora jungle with uprooting including all labour lead lift etc., complete.

Charges for geophysical survey for invetigation of borewell point at various location in the SS site

Drilling of 163 mm dia (6 1/2 ") vertical bore well in alluvial soil sedimentary strata of clay & sand stone, shale, pebbles, boulders etc. & enlarging to required dia by direct or reverse rotation method, labour, required water etc.,complete. Upto 60 m depth ending from GL

Supplying ans inserting 163mm dia PVC Casing pipes assembly (with slots or without slots) in the drilled hole including jointing the pipes with PVC Couplers with Cement paste etc., complete, supply and packing the annular space with pebbles of size and quality as approved by the executive engineers of TWAD Board

Supplying and erection of 3 phase 2 HP Texmo or equivalent double cylinder Compressor motor with pump of approved ISI make including cost of panel board, Switch 3 nos.,32 amps fuse unit, 3 nos. colour bulb, L & T starter, wire connections in the board using 7/20 copper wire 3 nos. 5 amsp switch, charges for bed bolt, bed etc. complete.

Supply and fixing of 32A TPN Switch of metal clad switch on suitable angle iron work with cable entry boxes for incoming and outgoing with PWD earthing

Supply, laying & fixing of 4core 6 Sqmm PVC armoured LTUG copper cable from Starter to compresor motor including jointing with motor,in a treach to be excavated at adepth of 0.75m putting 0.15mtr Layer on sand covering the cable completely with brick and sand and refilling a earth to make good

Supplying and fixing of 32mm HDPE pipes for Compressor pump inside and outside Bore wells ( 1 Mpa or 10 Kg / cm2 pressure ) with connecting specials for junction line including cost of all materials labour for fixing etc., complete.

Supplying and fixing of 20mm HDPE pipes for Compressor pump inside and outside Bore wells ( 1 Mpa or 10 Kg / cm2 pressure ) with connecting specials for junction line including cost of all materials labour for fixing etc., complete.

Supplying and fixing and erection of 20 mm dia GI pipe 'B' Class for air pressure motor to Bore including cost of pipe coupling,bend, labour for cutting , threading & fixing wherever necessary.

Earthwork excavating and depositing on bank with initial lead of 10m & initial lift of 2m in hard stiff clay stiff black cotton hard red earth, shales, murram, gravel stoney earth, earth mixed with small size boulders.

Earthwork excavating and depositing on bank with initial lead of 10m & initial lift of 2m in soft disintegrated rock laterite soft rock or kankar not requiring blasting, etc., complete.

Earthwork excavation in medium rock and dense medium rock requiring blasting. (As instructed by the Engineer at site)

Supplying and filling of M sand in foundation and basement with well watering and consolidation as per specn. including cost of all materials labour, lead, lift, etc., complete. (As instructed by the Engineer at site)

PCC 1:4:8 mix using 40mm HBS machine crushed metal for foundation including cost of all labour, materials, lead, lift, curing, etc., complete.

PCC 1:3:6 mix using 20mm HBS machine crushed metal for foundation including cost of all labour, materials, lead, lift, curing, etc., complete.

PCC 1:2:4 using 12-20mm HBS metal for structure concrete with form work including cost all materials lead, lifts, labour curing etc complete

Refilling with excavated soil other than sand in foundation and sides of masonry, consolidation as per std. specn. With water including all labour, lead, lifts. etc, complete.

Removing the excess earth to the basement area as instructed by field engineer including all labour lead, lift, etc., complete.

Supplying and filling of Red gravel in the basement filling stacking to the department gauge, labour for filling, watering and consolidation, including cost of all materials, lead, lifts, labour, etc, complete.

Supplying and fabricating and placing in position of MS / RTS steel reinforcement for RCC works including labour for cutting, bending, tying and fixing in position as per specification including cost of all materials, lead, lift, labour, cost of binding wire, etc., complete.

RCC 1:1.5:3 using 12 to 20mm (machine crushed) metal for raft foundation without formwork including cost of all materials, labour lead, lift, etc., complete

Supplying and fixing Pre cast RCC slab using 1:1.5:3 mix concrete for septic tank cover slab, cub board slab ,man Hole Cover slab including all cost of materails lead lift etc complete.(exculding Steel reinforcement)

RCC 1:1.5:3 using 12 to 20 mm HBG machine crushed metal for foundation/footing/ plinth with formwork including cost of cement all materials, labour,lead, lift, curing etc., complete.

RCC 1: 1.5:3 using 12-20mm HBS metal (machine crushed) metal for concrete with centering shuttering form work including cost of all material, lead, lift, etc, complete, but excluding cost of steel reinforcement..

Column up to Basement

Grade Beam

Column above Basement, up to Ground floor Roof level parapet wall

Plinth beam

Lintel beam

Shunshade

Roof beam

RCC road concrete

RCC Wall

Labour charges for transporting from casting yard to curing tank, curing tank to cable duct , aligning and laying of RCC pre cast slab as directed by the site engineer including all labour lead lifts etc complete

Brickwork in CM 1:5 mix using II class chamber bricks of size 9"x 4 3/8"x2"3/4" for super structure including cost of all materials, labour, lead, lift, curing, etc., complete. For Basement

Brickwork in CM 1:5 mix using II class chamber bricks of size 9"x 4 3/8"x2"3/4" for super structure including cost of all materials, labour, lead, lift, curing, etc., complete. For Super Structure

RCC1:1 1/2:3 using 12mm to 20 mm HBS metal (machine crushed) for roof slab concrete of 130 mm thick with formwork including cost of all materials, labour, lead, lift, centring shuttering , curing, etc., complete. But excluding cost of steel reinforcement. (Ground roof slab)

Plastering with CM.1:5 mix using 12mm thick for inside & outside walls, including cost of all materials, labour, lead, lift, etc., complete.

Plastering with CM. 1:3 mix 12 mm thick for fol, bath, RCC pillars, sunshade, loft, etc., including cost of materials, labour, lead, lift, watering, curing, etc., complete.

Providing projected border of 10cm width for wing wall including cost of materials, labour,lead,lift etc., complete

Providing UPVC (Un-Plasticized Polyvinyl Chloride) Door: Providing and fixing casement doors fabricated from un-plasticized polyvinyl chloride (uPVC) sections. Profiles: The profiles should be three chamber system which provides high insulation properties with outer frame 60mm x 55mm with an outer wall thickness of 2.4mm. The window unit should be designed with all corner joints mitred and fusion welded. Windows should be steel reinforced with 25 x 24 x 25mm steel reinforcement with a thickness of 1mm to have dimensional stability. The sash should be of 60 x 102mm. The mullion should be of 60 x 74mm. The profiles should have co-extruded seals.

Supply and Fixing of Hydraulic Floor Springs of various sizes, Double Acton Hydraulic Floor Spring of approved quality, brand, manufacture asper BIS Standards for doors including cost of cutting floors as required, embedding in to floors and stainless steel cover plates with aluminium pivot and single piece MS sheet outer box with side plate etc., capaple of taking upto 130 kg. weight from door shutter, like HARDWYN make (U-32) or its Euivalent with ISI monogram.

Supplying and fixing UPVC (Un-Plasticized Polyvinyl Chloride) Windows of casement type (open) from the profile the size of outer frame 60mm x 58mm and shutter profile are reinforcement with GI/1mm 125GSM and 100% corrosion free, the profiles are multi chambered sections with wall thick of 2mm. The EPDM rubber (black colour) covered with over all the edges of frame and shutter the shutter will be provided with Espag multi power point locks and also it operates as handle. The corners and joints should be welded and cleaned. Radiations free pin headed plain or brown colour glass 4mm thick should be provided to the shutter and it should not allow leakage of water even at most ranging storms and should have key lockable action, security protective hinges, strong locking systems and as per size for arresting noise and energy loss. The connecting mechanism between sash and outer frame that enables opening of the window. The window should be fixed to the wall with 100% packing with screws and silicon packing all round the frames. The window should be got approved from the Executive Engineer before use on work. (As instructed by the Engineer at site)

Supplying and fixing UPVC (Un-Plasticized Polyvinyl Chloride) Louvered Ventilators of from the profile the size of outer frame 60mm x 58mm and shutter profile size of 60 x 78mm both profiles are reinforced with GI/1mm 125GSM and 100% corrosion free, the profile are multi chambered sections with wall thick of 2mm. The EPDM rubber (black colour) covered with all over the edges of frame and shutter. The corners and joints should be welded and cleaned. Radiations pin headed glass 4mm thick should be provided in the louvers. The window should be fixed to the wall with 100% packing with screws and silicon packing all round the frames. The ventilator should be got approved from the Executive Engineer before use on work.

M&F in position of PVC door shutter made of Single Panel laminated Plastic section and PVC extracted shutter frame of size 24 x 60 mm including cost of 3 nos 85 mm butt hinges for single leaf door of size 0.80 x 2.00 m with 2 No aluminium handle and 2 nos 150 x 2 mm aluminium towel bolt hinges etc., complete.

Supplying and fixing of two side polished 20-30mm tk.cuddapah slab for cupboard, kitchen platform etc., including cost of all materials, labour, lead, lift, etc., complete

Dadooing with glazed tiles of best approved quality of make johnson, neycer etc, over CM 1:3, 12mm thick including cost of all materials, labour, lead, lift, etc., complete.

Flooring with approved Vitrified tiles 600x600mm of approved Quality, design & colour (Johnson or equivalent make)laid in cement mortar 1:3 - 20mm thick including pointing with same coloured cement using 0.4kg/sqm, finishing the joints, including cost of all materials, water charges,labour, lead, lift, etc. complete.

Flooring with approved acid proof tiles over cement mortor 1:3 20mm thick in floor including pointing with white cement finishing the joints flush pointing the surface etc including cost of all materials, water charges labour, lead, lift, etc. complete.(Battery Room)

Providing surki concrete with broken brick jelly of 20 mm size in pure slaked lime over RCC roof slab in the proportion 32:12.5 for a depth of 80mm for giving required slope and thickness to roof as required, well beaten with wooden beaters including cost of all materials, labours, lead, lift, curing, etc., complete.

Providing one coarse of pressed tiles of 23x23x2cm embedded with CM 1:3 mixed with crude oil at 10% by weight of cement and pointed with same oiled mortor including all material, labour, lead, lift etc complete

Supply and run of 4of 4 sq.mm (84/0.3) PVC insulated SC unsheathed Cu.Conductor of 1100V grade in 32mm dia GI pipe (Class 'B') bent at both ends with necessary angle iron up right and end supports for mains

Supply and run of 4 of 4 Sqmm(84/0.3) PVC insulated SC unsheathed cu.conductor of 110V on 7/20GI bearer wire for service connection mains.

Supply and fixing of TNEB meter Board suitable for 32A three Phase service connection with 3 Nos. 32A Fuse unit (500V) 32A neutral link and earth link (1" x 1/8" Copper flat) on TW plank of size 600mm x 450mm x 19mm with supporting TW reepers of 1" thick an either side with painting with suitable bolt and nuts for fixing the TW plank on wall with earth connection and inter connection with 7/20 PVC insulated copper wire from EB meter to fuse unit.

Supply and fixing of 3 phase 4 wire 4 way ICDB of 16A per way with 32 A TPN MC switch with suitable MS cable entry boxes trunking box and internal connection on suitable angle iron frame work with earth connection only.

Supplying and fixing of 4pole sheet steel enclosure for MCB with surface mounted type

Supplying and fixing of 32A TP -MCB C Curve (White) including labour, material etc complet.

Wiring with 2 x 1.5 sqmm (22/0.3) PVC insulated unsheathed Sc Cu.Conductor of 1100V grade in suitable PVC rigid pipe on wall and ceiling with PVC accessories with TW switch box with 5A F.T. switch with painting of suitable colour with continous earth wire connection of 14SWG wire for open PVC light point / fan point (For electronic regulator)

wiring with 2x1.5Sqmm(22/0.3) PVC insulated single core unsheathed copper conductor of 1100grade in suitable PVC rigid pipe on wall and ceiling with PVC accessories with 150mmx100mmx 113mm TW switch box in flush with wall with 3mm hylem sheet cover for 5A 3pin non inter locking wall socket with 5A flush type switch with paiting of suitable colour with continuous earth wire connection of14SWg TC wire for open PVC plug point

Supply and fixing of 5A 3 pin and 2 pin combined flush type wall socket with 5A flush type switch on suitable TW box

Wiring with 2x4sqmm (56/0.3) PVC insulated SC unsheathed Cu.Conductor of 1100 V grade in suitable PVC rigid pipe on wall and ceiling with PVC accessories with 150 mm x 100 mm x 63mm TW switch box for 15 A 3 pin non inter locking CS plug with painting of suitable colour with continuous earth wire connection of 14 SWG TC wire for open PVC plug point.

Supply and fixing of single box type 4' 18 W crystal glass LED tube ight fitting complete ,with PVC unsheathed Copper leads from terminals to the fitting

Supplying and fixing of 23 cm angular holder with EI fancy shade glass with 11w LED bulb fitting complete ,with PVC unsheathed Copper leads from terminals to the fitting

Supply and fixing of 1400 mm (56") AC ceiling fan complete with stepped electronic 300W regulator with 300mm down rod on the existing clampwith approved quality of crompton/rally/ usha/ bajaj fan including all cost of material, etc complete.

Supply and fixing of WT bulk head fitting with guard (Philips / Bajaj / Crompton/ K.Lite) suitable for 11w CFL lamp with CFL

Supply and run of 2of 4sqmm (56/0.3)OVC PVC insulated Single Core unsheathed Cu.Conductor of 1100 V grade in suitable PVC rigid pipe on wall and ceiling with with continuous earth wire connection of 14 SWG TC wire with painting of suitable colour

Supplying and fixing of 375mm (15') sweep heavy duty AC Exhaust fan with MS/Fibre louvers shutters arrangements of approved ISI quality complete with necessary wall opening and making good of the wall

Supplying and fixing of digital LED Wall Clock of approved quality such as Ajantha / Seiko/ Citizen etc including transport, fixing charges etc complete.

Supplying and fixing of 4 pole 32 Amps Isolator 1 No with MCB box 4 pole including terminal block for testing purpose at Control room, cost of all materials, lead, lift, labour charge, etc., complete.

Supply and fixing of gate pillar (floor mount series) lamps with LED bulb fittings including cost of all materials,labour etc., complete

Earthing as per P.W.D standard with an earth electrode of 2 Mtr. Class 'B' GI pipe of dia not less than 32mm complete with necessary masonry work.(SD-234)

Providing and laying of 20 mm dia PVC 10 kg high density pipe including cost of all materials viz.bend, labour for cutting threading fixing and tightening necessary excavation etc., complete. -

Supplying, jointing and fixing in position of 25 mm dia PVC water pipes ISI make 10 Kg / cm2 (Finolex or equivalent) including PVC specials, cost of other materials, lead, lift, labour charges, etc., complete as directed by the Engineer at site.

Providing and laying of 32 mm dia PVC 10 kg high density pipe including cost of all materials viz.bend, labour for cutting threading fixing and tightening necessary excavation etc., complete.

Supplying and fixing in position of 32 mm dia GM gate valve best quality including cost of all special fixtures lead, lift,etc., complete. -

Supplying and fixing in position of PVC ready made water tank of 500 litre capacity of best quality approved make including cost of cover, with provision of inlet, outlet and over flow pipes, transporting and fixing charges & complying with standard specifications including cost of all materials,specials, cutting,threading and jointing charges, labour,necessary fittings, lead, lift, etc., complete.

Supplying and fixing of 15mm high quality brass Chromium plated screw down bib cock (Heavy Type) such as leader, zeolite and zenith of any other approved quality cost of all materials, labour, lead, lift, etc., complete.

Supplying and laying UPVC pipe 100 mm outer dia 6kg / cm2 ISI make for cable duct including cost of UPVC pipe, labour for cutting laying fixing etc complete (As instructed by engineer at site)

Supplying and laying PVC pipe 110 mm outer die 6kg / cm2 ISI make for laying the Sewer line including cost of pvc pipe coupling labour for cutting laying fixing tightening etc. including earth work excavation and refilling trench etc complete

110mm dia PVC pipe

110mm dia PVC Bend

110mm dia Pvc TEE

supply and fixing of 100mm dia PVC Air vent pipe with cowl and masonry works including all led, lift etc complete.

Providing and fixing in position oriya type Indian water closet Size 580x440mm white glazed approved make with P or S trap with sand cusion and forming flooring around the closet using 20mm broken brick jelly concrete 1:2:5 100mm thick and finishing the top to required slope including cost of all materials lead lift etc complete. (1set)

Providing and fixing sanitary fitting consisting of Neycer / parryware of European Water Closet with "P" or "S" Trap with Double Flapped Seat and Seat Cover with Brass Hinges and 10 litre capacity PVC Low Level Flusing Tank with all internal fittings including cost of all material, labour, lead, lift, etc, complete.

Supplying and fixing of best quality of mirror of size 300 x450mm mirror with soap tray, towel stand, screw and fixing near the wash basin, teak wood round block, including cost of all material, labour, lead, lift, etc, complete.

Supplying and fixing 100x50mm PVC floor trap in bath room with one pvc door bend shoe of 50mm.dia including cost of all etc., complete

Supplying and fixing in position white wash hand basin of size 500x400mm with out pedastal of approved quality and make with 32mm CP waste coupling, rubber plug and chain, 32mm dia B' class GI waste pipe, 12/15mm CP angle cock [ISI], 15mm brass nipple, 15mm nylon connection 12/15mm dia brass CP pillar tap etc , fixing the wash basin in the wall with GI/Alu. brackets, giving necessary water connection including the cost of all materials, labour, lead,lift, T&P etc complete.-1set

Supplying and fixing of approved quality of Brass Chromium plated towel rod of size 90cm and fixing the same over the teak wood round block and soap tray (pvc) in bath room including cost of all materials, lead, lift, etc., complete.

Supply and erection of 20 mm PVC Tap for earth pits.

Supplying, jointing and fixing in position of 110 mm dia ( 4kg / cm2 ) PVC approval quality and best variety (Finolex or equivalent) pipe for Rainwater downfall pipe including specials, T.W plugs, clamps, screws, labours, lead, lift, etc., complete.

Supplying and fixing of MS angle (various sizes)for cable duct including aliging in position and including all labour lead lifts etc complete.

Supplying and fixing in position of MS channel 110 x 50mm required length for fixing the cable duct side wall, as per the direction of site Engineer including cost of all materials, lead, lifts, and cutting the MS channel required length and labour for fixing etc., complete.

Supply and fixing of MS rails (90 LBS )in transformer plinth to required level and alignment as directed by the engineer incharge at site with all labour lead lift etc complete

Supplying,fabricating, fixing of MS grill gate as Per drawing and as per direction of Engineer at site cost including all materials,T&P lead,lift Painting with two coats of approved enamel paint over one coat of red oxide primer paint etc complete

Supplying and filling of Wet Mix 1:3:6 with 40mm metal including cost of all labour, Materials, lead ,lift, water consolidation , laying charges, Hire charges for power roller etc complete as directed by the Engineer-in-charges.

Provision of Sand drum for the each power transformer cost of Material and transport charges etc

Provision of Msand at the substation including cost of Material and transport charges etc

Supplying and filling of stone chips 12-20 mm HBG metal with required thick all lead and lift including and all other T&P etc., complete.

Supplying and filling of stone dust with required thick all lead and lift including and all other T&P etc., complete.

White washing two coats with White cement approved quality over a primary coat for ceiling, exposed surfaces of wall, beam, slab, sunshade, lintel, etc, including cost of all materials, lead, lift, etc, complete.

Colour washing two coats with Exterior Plastic Emulsion paint over one coat of Plastic Emulsion primer for outside wall including cost of all materials, labour, lead, lift, etc., complete.

Colour washing two coats with Plastic Emulsion paint over one coat of Plastic Emulsion primer for inside wall including necessary wall putty two coats cost of all materials, labour, lead, lift, etc., complete.

Supply of S Type chair with nylon seated furnitures manufacture including cost of all materials, labour,lead and lift etc., complete as directed by the Enginer at site

Supply of Steel side rack open type including cost of all materials, labour,lead and lift etc., complete as directed by the Enginer at site.-

Supply of Steel table 45''x24''x30'' furnitures including cost of all materials, labour,lead and lift etc., complete as directed by the Enginer at site.

Supply of steel stool furnitures including cost of all materials, labour,lead and lift etc., complete as directed by the Enginer at site.

Supply of Steel half bench furnitures including cost of all materials, labour,lead and lift etc., complete as directed by the Enginer at site

Supply of PVC armed Chair of reputed make furnitures including cost of all materials, labour,lead and lift etc., complete as directed by the Enginer at site.

supplying and fixing of 10 guage of best quality IOWA GI barbed wire 2 ply 4 bars confirm to ISO 278 of IOWA and including of labour charges of tensioning of barbed wire as per drawing No.168,112 of 3eows of Horizontal and 9 rows verticaly in one bay of 3.0m including cost of GI barbed wire GI binding wire ,all labour, lead, lift etc. complete.

Supplying and fixing of 12mm dia eye bolts of 150mm long (single side eye) including labour,material,cutting,fabrication ,threading of bolt and nut washer, lead,lift etc complete.

Description of Work / Item(s)

Amount

I. SUPPLY OF SUBSTAION EQUIPMENTS, MATERIALS AND STRUCTURES

Supply erection, testing and commisioning of 8MVA, 33/11KV, 3phase, 50C/S, Dyn11 Outdoor Power Transformers having 8.35% impedance with on-load tap changing gear (+5% to -15% in steps of 1.25%), including transformer oil for first filling, RTCC panel and complete accessories and confirming to relevant IS & as per e-tender specification, Freight, packing, forwarding upto substation site anywhere in Tamil Nadu including unloading on the plinth, transport & Storage insurance for 90 days at site for the Power Transformer and accessories.

33V VCB (out door) 1250A, 40kA with TC

11KV VCB (out door) 1250A, 25kA

33KV CT (600-300/1-1A), outdoor type

11KV CT (1200-600/1-1A), outdoor type

11KV CT (400-200/1-1A), outdoor type

33KV Potential Transformer with TC (Single phase unit)

11KV Potential transformer with TC (Three phase unit)

AC Panel for 33KV SS

110 V DC annunciation panel Type B

110V DC indoor C&R Panel for GC Breaker

110V DC indoor C&R Panel for LV Breaker

110 V DC indoor C&R Panel for Twin feeder

110V, 120 AH Battery set with stand

110V, DC 24 A, Battery charger

14C x 2.5 Sq.mm Copper cable armoured

8C x 4 Sq.mm Copper cable armoured

4C x 4 Sq.mm Copper cable armoured

4C x 2.5 Sq.mm Copper cable armoured

2C x 2.5 Sq.mm Copper cable armoured

2C x 25 Sq.mm Power cable armoured

Supply and glanding of ISI mark cable gland of 19 / 22 mm sixe of reputed make including removing of insulation of cables and providing suitable holes as required and as directed by the field engineer.

Supply and glanding of ISI mark cable gland of 25 mm sixe of reputed make including removing of insulation of cables and providing suitable holes as required and as directed by the field engineer.

Supply and glanding of ISI mark cable gland of 28 mm sixe of reputed make including removing of insulation of cables and providing suitable holes as required and as directed by the field engineer.

Supply and termination of cable core end dressed neatly including the cost of cable socket (lug) ferrules, sleeves, tags, ties, stropes, etc., as directed by the field engineer.

22 KV PT Insulators

11 KV PT Insulator

11 KV, 120KN Disc insulators (Antifog)

50mm Aluminium Bus bar

Zebra ACSR conductor

Supply of eye bolt of 18 - 20 mm dia GI rod of required length suitable for 33KV, 22KV and 11KV strung bus including cost of GI rod and 2Nos GI nuts & washer as directed by the field Engineer.

Tension fitting Clamp 4 Bolted for Zebra

T Clamp for 2" Bus to Single Zebra

T Clamp for Zebra to Zebra

Switchend clamp for Single Zebra

Switchend clamp for 2" Busbar

Reducer clamp for 2" Bus to Zebra

PG Clamp for Zebra

Free end clamp for 2"Busbar

Corana Bell for 50mm Bus Bar

Switch end clamp for Mink

Seating Block for 2" Bus bar(for giving Elect Conn)

33KV Lightning Arrester Station type

11KV Lightning Arrester Station Type

11KV Lightning Arrester Distribution Type

33KV Centre rotating AB switch with PT insulators and without Support Structure

11KV centre rotating AB switch with PT insulators and without Support Structure.

Supply and fixing of godrej 6 lever long shackle navtol lock with triplicate keys for A.B.Switches and for any other purpose including the cost of ring and key token as directed by the field Engineer.

Supply and provision of 12/25x3mm flexible braided tinned copper / tinned copper flats as required and as directed by the field Engineer.

Supply and erection of 40 mm "B" class G.I.pipe for extension of tandem/ down pipe for A.B.Switches and for any other work required as directed by the field Engineer.

Fabrication, supply and fixing of C.T/P.T junction box of size 400x300x150 mm of 16 SWG(1.6mm) M.S.sheet with primer coat paint, Supply, Fabrication and erection of Box fixing Flats using 50x8 MSF, Supply and Fixing of 25x3mm² Braided Flexible tinned copper loops to box earth., Two coat of Enamel Paint, provision for fixing terminal blocks/ MCBs including consumables, freight, etc., as directed by the field Engineer on site requirements. (The box shall be vermin proof shall have sturdy hinges, & locking arrangements)

Supply of mounting channel suitable for CBTM 5 terminal block in panel /box as required and as directed by the field Engineer.

Supply and fixing of Disconnected type (Link type) Terminal blocks of reputed make such as Elmex/WAGO/Connectwell/Phoenix as directed by the field Engineer.

Supply and erection of ISI mark 16 Amps bakelite HRC fuse holder of reputed make in panels/ boxes for AC/DC/PT circuits wherever required as directed by the field Engineer.

Supply and erection of ISI mark 63 Amps bakelite HRC fuse holder of reputed make in panels/ boxes for AC/DC/PT circuits wherever required as directed by the field Engineer.

Supply and fixing of ISI mark HRC Fuse of 2/5/10/16 Amps from reputed make in panels/ boxes for AC/DC/PT Circuits wherever required as directed by the field Engineer

Supply and fixing of ISI mark HRC Fuse of 63 Amps of reputed make in panels/ boxes for AC/DC/PT Circuits wherever required as directed by the field Engineer

Supply and fixing of ISI mark 100 Amps porcelain fuse unit of reputed make in panels, boxes for AC Circuits wherever required as directed by the field Engineer

Supply and fixing of ISI mark 200 Amps porcelain fuse unit of reputed make in panels, boxes for AC Circuits wherever required as directed by the field Engineer

Supply and fixing of 32 AMPS - 3 phase, 4 pole MCB of Havells/Schneider/ MDS/ Reputed make with ISI mark wherever required as directed by the field engineer.

Supply and fixing of 16 AMPS - single phase, single poleMCB of Havells/Schneider/ MDS/ Reputed make with ISI mark wherever required as directed by the field engineer.

Supply and fixing of Hylem board 8/10 mm thick wherever required as directed by the field Engineer.

Fabrication, supply and fixing A.C.distribution box of size 750x750x250 mm out of 14SWG (2mm) M.S.Sheet including primer paint coat, Supply, Fabrication and Erection of Fixing Flat using 65x10MSF, supply & fixing of 3 nos 200A and 6 nos 100A Porcelain fuse units, Supply and Painting of Two coat of Enamel Paint including cost of materials, consumables, fright, etc., as directed by the field engineer. The box shall be vermin proof shall have sturdy hinges, provision for mounting MCB and MCCB, detachable gland plate and locking arrangements.

Supply and fixing of AC 3 phase 4 pole 415V ISI mark changeover switch of reputed make iron glad metal switch as required and directed by the field Engineer. Rating - 63 AMps

Supply of various types of HOT DIPPED GALVANISHED fabricated steel structures confirming to IS 2062 Gr A at site as per the std.design/ Drawing, including Freight & Handling, Loading, unloading, Labour, machinery and Consumables and as directed by the field Engineer.

33 KV Four Pole structure (Incomer 4.5 mtr centre)

33 KV Strung Bus structure

33 KV Power Transformer Gantry structure

33 KV AB switch structure (1.8 m centre)

33 KV Pie support Structure (1.8 m centre)

33 KV LAS Structure under Strung Bus (1.8 m centre)

11 KV Feeder Bay structures (4 m cetre center) with 6 Bays + 2 LV

11 KV Station Transformer structure

Non-specfied hot dip galvanized structures for Extension, Alterations, and Deductions as per station requirement.

Heavy section using RSJ 250 x 125 mm

Heavy section using RSJ 200 x 100 mm

Galvanished Iron Channel 100x 50

Galvanished Iron Angle 65x65x6

Galvanished Iron Angle 50x50x6

Galvanished Iron 6mm Chequered plate

16 SWG GI Sheet

Galvanished Iron Angle 25x25x3

Galvanished Iron Round rod 12mm

Supply of various types of Mild steels items including Cost of steel, Freight & Handling confirming to IS 2062 Gr A at site, Fabricating the steels in to specified structures as per the std.design/Drawing, Painting of Primer coat of Redoxide paint with supply of reputed make paints after proper surface preparation such as cleaning of rust scales using appropriate machinery including all Labour, machinery and Consumables and as directed by the field Engineer at the SS site.

33/22 KV Breaker Platform

11 KV Breaker Platform

Yard Fire Stand frame with top canopy cover

Battery Room Fire Stand

AC Junction Box fixing frame

11 KV/433 V, 100 KVA Station Transformer

11 KV Horn gap fuse

Supply and Erection of 5m Grouting type lamp post of B class MS pipe (3 inch dia for 3mtrs & 2.5inch dia for 2mtrs) including single/double fitting (Straight or 'V' type) fixing arrangements, 1 inch dia B class pipe arms, yard light box fixing flat and one coat of redoxide and one coat of aluminium paint.

Supply of Erection of yard light fuse unit mounting box of size 200x200x150mm (BxHxD) out of 18 SWG (1.22mm) M.S Sheet including primer paint as per Drawing including the Supply, Fabrication and Erection of Box fixing Flat using 50x8MSF, Two coat of enamel paints, provided with 16/20A rewirable Porcelain Fuse carrier unit, 16 A Bakelite connenectors including its cost materials, consumables, freight, etc and as directed by the fiels Engineer on site requirements. (The box shall be vermin proof, shall be provided with sturdy hinges, with provision for cable entry and locking arrangements).

Supply and Erection of reputed make street light fitting with 1x(70-75)W or 2x(35-40)W, 240V CGL/ PHILIPS make LED Lamp.

Supply of Fabricated main equipment board 2500 X 1500 mm out of 14 SWG M.S Sheet, alongwith painted MS Channels(100 x 50 MM) and MS Flat(65x65x6) (50x50x6) (50x6) and mounting the Board on to a Structure with all reuqired hardware.

Supply of 1000V/2000 M ohm Hand operated Meggar

Supply of Digital Multimeter as per IS standards

Supply of Power clamp Meter 400A AC/DC, Modal CL30 with Accessories

Supply & providing of 9 Litre capacity Mechanical foam type fire extinguisher with all accessories conforming to IS

Supply & providing of 25 KG DCP (Dry Chemical Powder) type fire extinguisher with all accessories conforming to IS

Supply & providing of 10 KG DCP (Dry Chemical Powder) type fire extinguisher with all accessories conforming to IS

Supply & providing of 5 KG DCP (Dry Chemical Powder) type fire extinguisher with all accessories conforming to IS

Supply & providing of fire buckets 10Ltrs capacity

Supply of sand drums of 580 mm Dia & 420 mm height with conical cover made of tin sheet to be provided with handle including the cost of barrel and other consumables as ditescted by the field Engineer including the cost of sand.

Supply of Danger board

Supply of rubber Gauntlets as per IS Standard as directed by the field Engineer.

Supply of rubber Gloves as per IS Standard as directed by the field Engineer.

Supply of Telescopic earth rod with copper wire 10 feet (SS type) as per IS Standard as directed by the field Engineer.

Supply of Discharge rod 10 feet (SS type) as per IS Standard as directed by the field Engineer.

Aluminium folding ladder 5 feet height

Supply of Box Spanner set & Align Key

Supply of Rain coat

Supply of ISI brand Belt Rope

Supply of Reputed make Emergency Light (Portable)

Supply of First Aid Kit

Supply and fixing of Digital wall clock of Reputed Make

Supply of Vaccum cleaner of reputed Make

Supply of Drier of 1000 watts rating from a reputed make

Supply of Floor Mat of Size 4 X 2 feet

Supply of Enamel Paint including cost of paint, brush and consumables etc.,

Supply & fixing of LC/Key board out of 75x 25mm Alu. frame embedded with 12mm pre-laminated wood particle board using screw on rear side, 2Nos plain glass sliding shutter of 5mm thick fixed with metal roller on Alu.channel with locking arrangements, glass piece handle shutters, wall clamp, key hooks as directed by the field Engineer including cost of all materials & all consumables.

EARTHING MATERIALS

Supply of Galvanished steel round rod of 40 mm dia for earth electrodes ( Each earth electrodes should contain double rods each with 6 meter length)

Supply of earthpit collar 12 inch dia 6 inch height

Fabrication and supply of earth spikes with Galvanised steel rods of 40 mm thickness. The earth spikes should have 3 meters in length and the top end of the earth spike should be sharpened. (Total No of spikes 16 Nos)

fabrication, supply & fixing of Earthpit detail board including the cost of 20SWG CR Sheet, 10mm RTS Rod , T &P etc., complete.

Supply of GS FLAT 65X10 mm

Supply of GS FLAT 50X8 mm

Supply of Rubber mat of size 2000X1000X10mm as per relavent ISI Code.

Supply of M8, M9, M10, M12 & M16 full thread GI bolt, nuts & GI washer of various size with IS Grade for erection of insulator or any other purpose wherever required and as directed by the field Engineer.

II. LABOUR CHARGES FOR ERECTION, TESTING AND COMMISIONING OF POWER TRANSFORMERS, SUBSTAION EQUIPMENTS, STRUCTURES, PANEL BOARDS, BATTERY SET etc.

Labour charges for complete erection, testing and commisioning of the 8 MVA Power Transformer with complete accessories.

LABOUR CHARGES FOR ERECTION, TESTING AND COMMISIONING OF OTHER SUBSTAION EQUIPMENTS, STRUCTURES, PANEL BOARDS, BATTERY SET etc.

Labour for erection of 33/22/11kV Breaker using crane arranged by the Contractor including the cost of gada cloth taflan tape and other consumables including support structure providing holes, gas filling wherever necessary as directed by the field Engineer.

Labour for erection of 33/22/11kV Current transformers CTs without using crane including providing holes wherever required as directed by the field Engineer.

Labour for erection of 33/22/11KV , PT, (one S.Ph or 3Ph. Unit) with provision of hardwares,etc. Using manual labour

Labour for the Erection of Simplex Control Panels/AC/DC/C&R Panel of Non-Grid type, Battery Chargers, Single feeder Control/ Relay Panels of Grid type (P&C)

Labour for the Erection of Simplex double feeder Control and relay Panels.

Labour Charge for assembling of battery charger, including supply & fabrication of MS flat 65x10mm for mounting arrangement and earthing of panel including hardwares.(Simplex indoor/outdoor)

Labour for Erection of Battery set including two coats of painting of Acid proof paint on wooden stand (including any modification if required) and neatly stacking the Battery cells and fixing of connecting plates including any modifications/ alterations required as directed by field Engineer. 110 V, 120 AH.

Labour, Consumables for the Initial filling and First Charging of the Battery to the required AH input and thereafter atleast 3 cycles of Charge / Discharge of the Battery set till the battery is charged to its full Capacity as directed by the field Engineer. 110 V, 120 AH

Labour for erection of cable in duct/ trench/ clamping on structures - neat laying in the ducts with identification Aluminium tags in all duct corners for easy identification of cables including fabrication of clamps and fixing at uniform intervals as directed by the field Engineer. Upto 8 Core

Labour for erection of cable in duct/ trench/ clamping on structures - neat laying in the ducts with identification Aluminium tags in all duct corners for easy identification of cables including fabrication of clamps and fixing at uniform intervals as directed by the field Engineer. Above 8 Core

Labour charges for laying of 2C x 16 Sq.mm Copper Power cable armoured (2 runs) or one run of 4Cx16 sq.mm

Labour for excavating and refilling of earth /trench for earthmat, cable, etc., of any size/depth narrow excavation as directed by the field Engineer in Normal clay / hard gravel soil

Labour for erection of 33/22/11kV LAS station / Distribution type single unit including monitors & accessories.

Labour for the Erection of Strung bus upto 33kV Single Conductor Strung Bus/phase and all related hardwares, fittings, clamps including Meggering, hoisting of insulators and consumables and as directed by the field Engineer. upto 33kV Single Conductor Strung Bus/phase. (5 bus x 3 conductors= 15 Run)

Labour for erection of 50mm busbar with bend including suitable modification of end clamps, providing holes whereever necessary as directed by the field Engineer.

Labour for the erection of Insulator single pole stack for supports / Underhang including Meggering & other consumables and as directed by the field Engineer. Upto 33 KV

Labour for the Erection of Jumper/ Droppers using Moose/ Zebra/ panther Conductors including Modification of End clamps, providing holes etc wherever necessary as directed by the field Engineer.

Labour for erection of 33/22/11kV station transformers with/without crane and as directed by the field Engineer.

Labour for erection of HG fuse complete set 33/22/11kV

Labour for erection of 33 KV Isolators with proper allingments including accessories, Meggering and cost of consumables and lubricants and as directed by the field Engineer.

Labour for erection of 11 KV Isolators with proper allingments including accessories, Meggering and cost of consumables and lubricants and as directed by the field Engineer.

Labour for the Erection of the fabricated steel structures at the SS site with Supply of GI Bolts, Nuts & Washers (Spring/Flat as required) confirming to IS including Labour, machinery and Consumables as required & as directed by the field Engineer.

33 KV Four Pole structure (Incomer)

33 KV Strung Bus structure

33 KV Power Transformer Gantry structure

33 KV AB switch structure (1.8 m centre)

33 KV Pie support Structure (1.8 m centre)

33 KV LAS Structure under Strung Bus (1.8 m centre)

11 KV Feeder Bay structures with 6 Bays + 2 LV

11 KV Station Transformer structure

Labour Charges for Erection of Non-specified structures, Extension, Alterations, and Deductions as per station requirement.

Heavy section using RSJ 250 x 125 mm / 200 x 100 mm

Light section (other than heavy section)

Other Station Structures

33/22 KV Breaker Platform

11 KV Breaker Platform

Yard Fire Stand frame with top canopy cover

Battery Room Fire Stand

AC Junction Box fixing frame

PAINTING - Labour charges for two coats of enamel painting in substation structures, steels etc., including the cost of reputed make paints and other consumables as directed by the field engineer.

33/22 KV Breaker Platform

11 KV Breaker Platform

Yard Fire Stand frame with top canopy cover

Battery Room Fire Stand

AC Junction Box fixing frame

Supply & Labour charges for two coats of enamel painting in any substation structures, steels, etc and wherever required including the cost of reputed make paints and other consumables as directed by the field Engineer.

Labour charges for writing details in any finished surface/board including cost of enamel paints and other consumables as directed by the field Engineer.

Supply and erection of Vinyl Sticker cutting/ Printing on Vinyl Sticker/ Foam board to be used for main equipment, slogan, name board & any other purpose of required sizes as directed by the field Engineer.

Labour charges for drawing layout and writing details/ Vinyl Printing in LC/ Key board including cost of enamel paint (Dulex, Asian, Berger preferred) and Other consumables as directed by the field Engineer.

Providing Earth bore 140/150 mm dia using power rig or 100/125 mm dia using hand bore set including the labour, lead, lift etc., sedimentary strata of clay & sand stone shale pebbles boulders etc., for earth Pits with supply and providing of Bentonite powder (Sodium Bentonite) 5Kg /Mtr depth of the bore mixed with low resistivity earths as directed by the field Engineer (Earth to be supplied by the contractor)

Labour, machinery, consumables for fabrication, erection of earthmat, earth connection, earth electrode, earthspike (including sharpening of earth spike) as directed by the field Engineer.

CHARGES FOR TESTING AND COMMISIONING OF SS EQUIPMENTS

Testing and commisioning of GC, LV and feeder breakers with associtaed CT, PTs and Panels

LABOUR CHARGES FOR ERECTION OF SUPPORT STRUCTURES FOR BREAKERS AND YARD LIGHTS

Earthwork excavating and depositing on bank with initial lead of 10m & initial lift of 2m in hard stiff clay stiff black cotton hard red earth, shales, murram, gravel stoney earth, earth mixed with small size boulders.

Earthwork excavating and depositing on bank with initial lead of 10m & initial lift of 2m in soft disintegrated rock laterite soft rock or kankar not requiring blasting, etc., complete.

Earthwork excavation in medium rock and dense medium rock not requiring blasting.

Supplying and filling of M sand in foundation and basement with well watering and consolidation as per specn. including cost of all materials labour, lead, lift, etc., complete.

PCC 1:3:6 mix using 20mm HBS machine crushed metal for foundation including with out form work cost of all labour, materials, lead, lift, curing, etc., complete.

PCC 1:2:4 using 12-20mm HBS metal for structure concrete with form work including cost all materials lead, lifts, labour curing etc complete

PCC 1:2:4 using 12-20mm HBS metal for support structures concrete with out formwork including cost all materials lead, lifts, labour curing etc complete

RCC 1:1.5:3 using 12-20mm (machine crushed) metal for raft foundation without formwork including cost of all materials, labour, lead, lift, etc., complete.

Plastering with CM. 1:3 mix 12mm thick including cost of materials, labour, lead, lift, watering, curing, etc., complete.

Colour washing two coats with Exterior Plastic Emulsion paint over one coat of Plastic Emulsion primer for outside wall including cost of all materials, labour, lead, lift, etc., complete.

Assembling of various plinth templates for providing concrete including transporting from one plinth to another, alingning fixing to corrrect level and dismatling the templete after concreting including cost of labour, cost of template, lead, lift, etc., complete.

Supplying and fabricating and placing in position of MS / RTS steel reinforcement for RCC works including labour for cutting, bending, tying and fixing in position as per specification including cost of all materials, lead, lift, labour, cost of binding w

Description of Work / Item(s)

Amount

FOR 33 KV LINE WORKS : SUPPLY OF HOT TIPPED GALVANISHED ION LINE MATERIALS INCLUDING, LOADING UNLOADING, TRANSPORTING CHARGES UPTO THE SITE

SUPPLY OF 42 FEET JOIST RSJ 200X100MM 42' LENGTH - OF HOT DIPPED GAVANISHED IRON

9 m PSC pole (5 Nos.)

TAPPING CHANNEL CROSS ARM 11KV

V CROSS ARM 1068MM 3.6'

V CROSS ARM 5'

CROSS ARM ANGLE 3PH

CHANNEL CROSS ARM 1PH LT

FITTINGS HT TI

Guarding cross arm

INSULATOR 33 KV POLYMER COMPOSITE PIN TYPE

METAL PARTS FOR RABBIT/ WEASEL CONDUCTOR

INSULATOR 33KV POLYMER COMPOSITE DISC

INSULATOR 11 KV POLYMER COMPOSITE PIN TYPE

INSULATOR 11KV POLYMER COMPOSITE DISC

LT PIN

LT PIN INSULATOR

ALUMINIUM KNOB

Stay CLAMP ORD 9M PSC POLE MS

BACK CLAMP FOR RS JOIST POLE 200X100MM

STAY CLAMP SPL RSJ POLE

STAY SET COMPLETE

GUY SHACKLE HT

Stay wire

INSULATOR LT SHACKLE

METAL PARTS LT

Dog CONDUCTOR

BOLT & NUT MS 3A 1/2" X5/8" 88/90X16MM

GI WIRE No.6 SWG

ERECTION CHARGES FOR 33 KV SOURCE LINES

Excavation and Erection of 42' pole pit

Loading and unloading of 42' RSJ Pole

Excavation and Erection of 9m PSC pole pit

Loading and unloading of 9M PSC Pole

Transporting of 9M PSC pole

Transporting of 42' RSJ pole from road side to pole pit

Fixing of Tapping cross arm

Fixing of V cross arm 3.5'

Fixing of V cross arm 5'

Fixing of 3 phase cross arm

Fixing of HT/LT pin insulator

Fixing of Disc

Fixing of Shackle

Erection of Stay Set Complete in rocky ground

Fixing of HT TI fitting

Stringing & Sagging of ACSR 7/4.09mm (Racoon) with LC

Stringing & sagging of ACSR 7/3.35mm with LC

Fixing Pole earthing

Pole concreting

Fixing of single phase X arm

DISMANTLING CHARGES

Dismantling of 9m PSC pole

Dismantling of 8m PSC pole

Dismantling of 30 RSJ pole

Dismantling of three phase X arm

Dismantling of 3.5" V cross arm

Dismantling of HT TI Fitting

Dismantling of Single phase X arm

Description of Work / Item(s)

Amount

FOR 33 KV LINE WORKS : SUPPLY OF HOT TIPPED GALVANISHED ION LINE MATERIALS INCLUDING, LOADING UNLOADING, TRANSPORTING CHARGES UPTO THE SITE

JOIST RS 200X100MM 36' LENGTH (54 Nos.)

BASE PLATE for RSJ Poles

TAPPING CHANNEL CROSS ARM 11KV

V CROSS ARM 1068MM 3.6'

CROSS ARM ANGLE 3PH

CHANNEL CROSS ARM 1PH LT

FITTINGS HT TI

GUARDING CROSS ARM

INSULATOR 11KV POLYMER COMPOSITE PIN TYPE

METAL PARTS FOR RABBIT/ WEASEL CONDUCTOR

INSULATOR 11KV POLYMER COMPOSITE DISC

BACK CLAMP FOR RS JOIST POLE 200X100MM

STAY CLAMP SPL RSJ POLE

STAY SET COMPLETE

GUY SHACKLE HT

Stay wire

7/4.09 ACSR CONDUCTOR

BOLT & NUT MS 3A 1/2" X5/8" 88/90X16MM

GI WIRE No.6 SWG

ERECTION CHARGES FOR 11 KV LINES

Excavation and Erection of 36' pole pit

Loading and unloading of 36' RSJ Pole

Transporting of 36' RSJ pole from road side to pole pit

Fixing of Tapping cross arm

Fixing of V cross arm 3.5'

Fixing of 3 phase cross arm

Fixing of HT/LT pin insulator

Fixing of Disc

Fixing of Shackle

Erection of Stay Set Complete in rocky ground

Fixing of HT TI fitting

Erection of 3 phase service connection

Erection of single phase service connection

Stringing & Sagging of ACSR 7/4.09mm (Racoon) with LC

Stringing & sagging of ACSR 7/3.35mm with LC

Fixing Pole earthing

Pole concreting

Fixing of single phase X arm

Providing jumpering at cut point

Alteration of clamp

Drilling of holes

Tree clearance

Fixing of danger board

DISMANTLING CHARGES

Dismantling of 9m PSC pole

Dismantling of 8m PSC pole

Dismantling of 7/2.50" ACSR with LC

Dismantling of three phase X arm

Dismantling of 3.5" V cross arm

Dismantling of HT TI Fitting

Dismantling of Single phase X arm

Dismantling of single phase service connection

Dismantling of three phase service connection

BVD POWER PRIVATE LIMITED (BID ID -1435619)

BVD POWER PRIVATE LIMITED (BID ID -1435619)

BVD POWER PRIVATE LIMITED (BID ID -1435619)

BVD POWER PRIVATE LIMITED (BID ID -1435619)

BVD POWER PRIVATE LIMITED (BID ID -1435619)