TCMC-Supply and Errection of Street Light Pole at Radha Nagar Subway

Amount

Providing Foundation for Street Light pole including earth work 60x60x65cm . filling crusher sand 10cm, base concrete 1:4:8 ration 10cm with 40mm metal , providing cantering four sides and filling plain cement concrete 1:2:4 mix with 20mm blue metals etc complete as per direction by departmental officers.

Supply, Erection of 8m Free Standing Double Arm Bracket 8 sided Octogonally continously tapered structured pole with base plate of size 300 x 300 x 12mm as per IS-875 with following specification. Bottom Pole Dia - 130mm Top Pole Dia - 70 mm Thickness of Pole - 3 mm The pole should be hot dip galvanized confirming to BESN ISO-1461 with thickness of 65 Micron PWD SoR Page No.161 (M.2135)

Supply, Erection of 8m Free Standing Single Arm Bracket 8 sided Octogonally continously tapered structured pole with base plate of size 300 x 300 x 12mm as per IS-875 with following specification. Bottom Pole Dia - 130mm Top Pole Dia - 70 mm Thickness of Pole - 3 mm The pole should be hot dip galvanized confirming to BESN ISO-1461 with thickness of 65 Micron PWD SoR Page No.161 (M.2134)

Supply and delivery of 120W LED street light fittings with minimum of 300mm length of 3 core 1 sqmm copper cable male connector completed as per technical specifications

Supply and delivery of 150W LED Flood Light light fittings with minimum of 300mm length of 3 core 1 sqmm copper cable male connector completed as per technical specifications M-1302

Supply, delivery and installation of 3 Core 1.0 Sq.mm copper cable with length of 9 meters and Female connector in the other end suitable to connect with Male connector in the LED fittings as per Standard technical specification

Supply and clarnping of 3.5 x 25 sq.mm. PVC LTUG armoured cable on post or on wall with MS clamps etc complete as per PWD standard specifications PWD SoR 2023-24 Ele.SD-222 (Pole to Ploe Cable)

Supply and laying of 2 x 25 sq.mm PVC armoured LTUG cable in a trench to be excavated at a depth of 0.75 metre putting 0.15 metre layer of sand and covering the cable completely with bricks and sand and refilling the earth to make good SD-204

Supply and Run of 32mm HDPE Pipe as per standard specifications PWD SoR 2023-24 M-1056

Supply and fixing of brass cable gland for 4 x 25 sq.mm. PVC LTUG armoured cable with earth connection etc., complete as per PWD standard specifications PWD SoR 2023-24 SD-185 (Transformer to EB Pillar Box)

Supply and delivery of RF based ILM device with Dimming including all cost of material and labour charges etc complete as per direct to departmental officers (120W & 200W)

Supply and laying of 3.5 x 50 Sqmm size of PVC armoured LTUG cable in a trench to be excavated at a depth of 0.75 metre putting 0.15 metre layer of sand and covering the three sides of the cable with bricks and refilling the earth to make good as per PWD SoR 2023-24 SD-206 (EB Pillar Box to Light Pole)

Supply and fixing of single phase service connection EB Meter box of size 12"x10"x6" with single compartment made up of 16SWG powder coated vermin proof metal sheet with clamps suitable for EB RCC pole suitable for single phase EB service connection. The meter box fixed with 12mm wooden board fixed with one number of 63 Amps porceline fuse unit Inter connection with 7/20Amps PVC insulated copper wire with one number of neutral link. The meter box should be provided with glass in front side. fixing of The meter box should be made PWD earthing. The rate includes dismanling of existing meter box and fixing new meter box, EB energy meter and accessories and termination of wires.

Supply and delivery of Three phase street light controller (TLC) including all cost of material and labour charges etc complete as per direct to departmental officers

Supply and Delivery of CCMC- one time license for software including all cost of material and labour charges etc complete as per direct to departmental officers.

Supply and Fixing of Miniature Circuit Breakers 240 v / 415v 50hz - ac supply suitable for both lighting and motor circuits

SUNVIEW ENTERPRISES (BID ID -1125546)