Wiring EI Fans in CE Civil offices CTO old Bldg at Telephone House

Amount

EI and Fans

Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed PVC conduit, with Piano type switch and earthing the point with 1.5 sq.mm. FRLS PVC insulated copper conductor single core cable etc. as required. a) Group B

Wiring for twin control light point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, 2 way Piano switch, and earthing the point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable etc. as required

Wiring for circuit/ submain wiring along with earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in existing surface/ recessed conduit/Truf as required. 2 X 1.5 sq. mm + 1 X 1.5 Sqmm earth wire

Wiring for circuit/ submain wiring along with earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in existing surface/ recessed conduit/Truf as required. 2 X 2.5 sq. mm + 1 X 2.5 Sqmm earth wire

Wiring for circuit/ submain wiring along with earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in existing surface/ recessed conduit/Truf as required.2 X 4 sq. mm + 1 X 4 Sqmm earth wire

Wiring for circuit/ submain wiring along with earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in existing surface/ recessed conduit/Truf as required.4 X 10 sq. mm + 2 X 4 sq. mm earth wire

Supplying and drawing 1 run of cable of UTP 4 pair CAT 6 LAN Cable in the existing surface/ recessed Steel/ PVC conduit as required

Supplying and fixing call bell on surface of wall suitable for operation on 230 V, 1 Ph, 50 Hz AC supply including connections etc as requried

S/M LAN End termination for CAT 6 Cable i/c providing jack, crimping etc as required.(D-Link or any Similar superior make)

Supplying and Fixing of 32 mm x 12.5 mm trunk box (Polycarbonate cable management) system on the surface of wall / floor / ceiling / on the the existing cable tray with necessary connected accessories like bends, Elbows, Tee, etc as required. [Make MK India / LK or any Similar Superior Make]

Supplying and Fixing of 25mm x 25 mm trunk box (Polycarbonate cable management) system on the surface of wall / floor / ceiling / on the the existing cable tray with necessary connected accessories like bends, Elbows, Tee, etc as required. [Make MK India / LK or any Similar Superior Make]

Supplying and Fixing of 50mm x 50 mm trunk box (Polycarbonate cable management) system on the surface of wall / floor / ceiling / on the the existing cable tray with necessary connected accessories like bends, elbows, Tee, etc as required. [Make MK India / LK or any Similar Superior Make]

Supplying and Fixing of 100mm x 50 mm trunk box (Polycarbonate cable management) system on the surface of wall / floor / ceiling / on the the existing cable tray with necessary connected accessories like bends, Elbows, Tee, etc as required. [Make MK India / LK or any Similar Superior Make]

Supplying and fixing of 20 mm dia medium class PVC conduit along with accessories in surface/recess including cutting the wall and making good the same in case of recessed conduit as required.

Supplying and fixing of 25 mm dia medium class PVC conduit along with accessories in surface/recess including cutting the wall and making good the same in case of recessed conduit as required.

Supplying and fixing of 32 mm dia medium class PVC conduit along with accessories in surface/recess including cutting the wall and making good the same in case of recessed conduit as required.

Supplying and fixing following way, single pole and neutral, sheet steel, MCB distribution board, 240 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator) (a) 4 way, Double door

Supplying and fixing 5 A to 32 A rating, 240 V, 10 kA, “C” curve, SINGLE POLE miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required

Supplying and fixing 5 A to 32 A rating, 240/415 V, 10 kA, “C” curve, DOUBLE POLE miniature circuit breaker suitable for inductive load in the existing MCB DB complete with connections, testing and commissioning etc. as required

Supplying and fixing 63 A rating, 415 V, 10 kA, “C” curve, FOUR POLE miniature circuit breaker suitable for inductive load in the existing MCB DB complete with connections, testing and commissioning etc. as required

Supplying and fixing 5/6 A piano type switch on the existing switch box/ cover including removing the unserviceable switch, connections with existing wires etc. as required.

Supplying and fixing 3 Pin 5 A piano type socket outlet on the existing switch box/ cover including removing the unserviceable socket, connections with existing wires etc. as required.

Supplying and fixing 15/16 A piano type switch on the existing switch box/ cover including removing the unserviceable switch, connections with existing wires etc. as required.

Supplying and fixing 6 Pin 15/16 A piano type socket outlet on the existing switch box/ cover including removing the unserviceable socket, connections with existing wires etc. as required.

Supplying and fixing two module stepped type electronic fan regulator on the existing switch plate/switch box including dismantling the unserviceable regulator, connections with existing wires etc. as required.

Supplying and fixing MS enclosure made of 16G MS sheet of suitable size along with phenolic laminated front cover, supplying and fixing 2 nos 5A Piano type switch and 2 nos 5A 3 Pin socket outlet, providing interconnection etc as required

Supplying and fixing Highly robust Industrial Box type luminaire suitable for single Single LED Batten of 4 feet length with T8 LED tube & all accessories on surface of wall including connections, testing etc as required (M/s Crompton IGP161LT8-16 or Similar Superior make)

Supplying and fixing 1x36 W, 4 feet length Box type fluorescent fitting along with electronic ballast, 36W tube on surface of wall including connections, testing etc as required (M/s Phillips/Crompton or any Similar Superior make)

Supplying and fixing 2x36 W, 4 feet length Box type fluorescent fitting along with all accessories such as choke, 2 nos 36 W tube on surface of wall including connections, testing etc as required (M/s Philips or any Similar Superior make)

Supplying and fixing Bulkhead fitting suitable for operation on 230V, 1 Ph AC supply including supplying and fixing LED lamp, connections etc as required

Supplying and fixing LED type Mirror light suitable for working on 230V 50 HZ AC supply etc., as rqd

Supplying and fixing 36 W electronic ballast in the existing Fluorescent fitting including dismantling the faulty choke, modifications to connections wherever required, testing etc as required

Supplying and fixing 36 W fluorescent tube in the existing Fluorescent fitting including dismantling the faulty tube, testing etc as required

Fixing of existing 4Way (4+12) Double door TPN MCB Distribution board with all incoming and outgoing MCB's on surface at 1st floor, Old CTO building including checking the interconnections, earthing etc. as required

Fixing of MS box along with 15A switch & socket on surface at 1st floor, Old CTO building including checking the interconnections, earthing, etc. as required

Fixing of MS box along with 4 nos 5A switch & 4 nos socket on surface at 1st floor, Old CTO building including checking the interconnections, earthing, etc. as required

Fixing of LAN outlet box with enclosure on surface at 1st floor, Old CTO building including checking the interconnections, earthing, etc. as required

Fixing of exisitng 400mm sweep, wall mounting fan, cleaning with detergent and replacing the faulty capacitors, general servicing, nuts and bolts with washers, reinstalling the same on surface of wall, connections with existing wires etc as required. etc as required.

Painting of existing MS switch boxes of size up to 200mmx150mm including cleaning the surface, painting with two coats of approved colour paint, providing missing screws, checking and tightening the interconnections etc as required

Supplying and Fixing of 400mm sweep, 1325 rpm wall mounting fan with thermal overload protection device with auto reset, oil reservoir lubrication, pull cord mechanism for on/off and speed control, aerodynamically designed aluminium blade, downward and upward tilit adjustment, 90 degree oscillation suitable for 230V AC supply etc as required. (M/s crompton/usha/ khaitan/bajaj/ orient or any Similar Superior make)

Supplying and Fixing of 300mm sweep exhaust fan, metal body, 4 blades suitable for 230V AC supply i/c s/f Aluminium frame in the existing opening / window, including making good the damages etc as required (M/s crompton trans air 300/usha/ khaitan/bajaj/ orient or any Similar Superior make)

Supplying and fixing 16 SWG MS sheet including cutting the sheet to required shape, powder coating to match with existing panels/DB, providing screws etc as required.

Supplying and fixing 2mm thick phenolic laminated sheet of various sizes for closing the switch box including providing necessary screws & washers etc as required.

Providing and fixing 6 SWG dia G.I.wire on surface or in recess for loop earthing as required.

Cleaning the surface of existing Ceiling fan with detergent and replacing the faulty capacitors, general servicing, replacing the damaged rubber reel, nuts and bolts, washers and safety pins, reinstalling the same in the existing down rod, connections with existing wires etc as required.

Fixing the existing 4.5 Kgs CO2 type fire extinguisher along with associated mounting bracket at 1st floor Old CTO building etc as required

ITC of dismantled 1.5 TR Spilt AC units along with indoor and outdoor units including gas charging, insulation and making opening in wall and making good the damages, including shifting the indoor and outdoor units from CTO building Ground floor to 1st floor Old CTO building, general servicing of the unit, fixing the dismantled MCB DB etc as required.

Supplying and laying of extra copper refrigerant pipe both hot gas line and liquid refrigerant lines of suitable size respectively including brazing, etc as required.

Supplying & Laying 50 mm Rigid/flexible PVC pipe with accessories for protection of refrigerant piping including clamping etc as required

Supplying and laying 20 mm Rigid PVC pipe with accessories for drain piping including clamping etc as required

Supplying & fixing of MS iron stand made of 38x38x5mm angular for mounting outdoor unit of the above AC i/c cutting, wedding, grouting, painting and minor civil works etc complete as required.

Providing and laying 3 core 2.5 Sqmm PVC insulated copper conductor cable suitable for the above AC units in existing pipe/surface of wall wherever required including connections etc as required.

Supplying and charging additional refrigerant gas suitable for existing split AC unit, including transportation etc as required

S/F following electrical accessories in the metal enclosure made of 16G MS Sheet of suitable size, i/c interconnection, testing etc., as required. a) Analog timer with built-in NO & NC contacts -1 No (Make: M/s L&T, GIC Model : J648B1 or similar superior make) b) 25A SPN MCB - 1 No c) 6/16 a SP MCB-2 Nos

SITC of 25 W LED street light fitting on existing pole complete with all accessories such as LED bulb suitable for 230V, 50Hz, AC supply, fixing on the existing bracket, interconnections, transportation, arranging ladder etc., as reqd., (M/s Crompton Greaves or similar superior make)

Supplying and Fixing 32 mm dia GI bracket for fixing of street light itting including necessary interconnecting wiring, clamps and bolts and nuts etc as required.

Supplying and laying 2 core 6 sqmm PVC insulated PVC sheathed insulated Aluminium conductor armoured UG cable on surface of wall including clamping, etc as required

Supplying & making end termination with brass compression gland for 2 core 6 sqmm PVC insulated PVC sheathed/XLPE Aluminium conductor armoured UG Cable including connections etc as required.

Supplying and fixing suitable size weather proof polycarbonate enclosure for compound light fittings including supplying and fixing 1 no connector, 1 no 6A SP MCB including interconnections etc as required

Dismantling the 4 U Rack with LAN Switch from 2nd Floor including disconnecting the interconnections and re-fixing the same in the IT Section/old CTO Building etc as required.