REPAIR MAINT OF EXTERNAL WATER SUPPLY PIPE LINE SLUICE BUTTERFLY AIR VALVE IN INF AND MH AREA AND REPAIR MAINT OF PUMP SETS STP CLEANING AND SUPPLY OF CHEMICAL AT STP AND REPAIR MAINT OF AMF PANEL CHANGE OVER SWITCH LT PANEL AND OTHER WK UNDER GE MIS

Amount

Excavation in trenches not exceeding 1.5 m wide and not exceeding 1.5 m deep in any type of soil for foundation, laying pipe, cable etc. or for shafts, wells, cesspits, manholes, pier holes, etc. and getting out complete all as specified and directed.

Earth work in excavation by mechanical means using Hydraulic excavator in over areas, exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan and getting out in any type of soil and disposal of excavated earth lead upto 50 m and lift upto 1.5 m complete all as specified and directed.

Earth work in excavation by mechanical means using Hydraulic excavator over areas (exceeding 30 cm in depth 1.5 m in width as well as 10 sqm on plan) and getting out in ordinary rock and disposal of excavated earth lead upto 50 m and lift upto 1.5 m complete all as specified and directed.

Returning, filling in excavated approved soil including spreading levelling watering and well ramming in layers n.exc 25 cm thick complete all as specified and directed.

Removing excavated excavated soil to a distance not exceeding 50 m and depositing where directed at a level n.exc. 1.5 m above the starting point complete all as specified and directed.

S&F graphite carbon brushes with spring suitable for slip ring of flocculator as per existing including taking out old unsv one complete all as specified and directed.

Taking up or down existing GI tubing and connections including cleaning for refixing or removal to store for following size of pipes complete all as specified and directed :-

100 mm bore

80 mm bore

50 mm bore

40 mm bore

25 mm bore

20 mm bore

15 mm bore

Supply, fixing, laying, jointing & testing galvanised iron water tubes 'medium grade' with and including all GI fittings such as flanges, unions, reducer sockets, socket reducing bends, elbows, tee, check nuts, caps, plugs etc.and clips, wall hooks etc. laid in trenches, on ground or fixing on wall and testing complete all as specified and directed of the following sizes: -

100 mm bore

80 mm bore

50 mm bore

40 mm bore

25 mm bore

20 mm bore

15 mm bore

Taking up cast iron water main from trenches carefully without any damage (including all fittings) with spigot and socket ends and lead joints including burning out joints and recovering lead complete all as specified and directed of the following sizes:-

150 mm bore

200 mm bore

250 mm bore

300 mm bore

Supply, fixing, jointing and testing cast iron pipe with spigot and socket ends suitable for run lead joints centrifugally cast class LA in any length laid in trenches complete all as specified and directed of the following sizes :-

150 mm bore

200 mm bore

250 mm bore

300 mm bore

M&L for CI fitting in repair, like cast iron bends (any type, radius and angle), tapers any type, (straight, bend, increasing, decreasing or double sockets etc.) tee pieces single branch, 'Y' junction, double branch, cross (all socket or spigot and socket) collars, caps and plug up to 150 mm bore for spigot and socket end pipes complete all as specified and directed.

M&L for CI fitting in repair, like cast iron bends (any type, radius and angle), tapers any type, (straight, bend, increasing, decreasing or double sockets etc.) tee pieces single branch, 'Y' junction, double branch, cross (all socket or spigot and socket) collars, caps and plug etc from size 200 mm bore to 400 mm bore for spigot and socket end pipes complete all as specified and directed.

S&F in repair sluice valves cast iron body, double flanged, ISI marked (IS-14846), heavy duty, class PN-1.6 gun metal, with non rising spindle of stainless steel, bronze body seat ring and operating handle, including rubber gaskets, nuts, bolts, washers etc complete of the following sizes: - Make "Kirloskar/Leader/Venus or other make as specified in Particular Specifications

80 mm bore

100 mm bore

150 mm bore

200 mm bore

250 mm bore

300 mm bore

M&L for construction of valve chamber in replacement 1200 x 1200 x 1200 mm (internal dimensions), 6 mm thick MS sheet cover with 2 Nos MS hinges welded to angle iron frame of 40x40x6mm thick with lifting hook and locking arrangement complete with necessary earth work, brick work in cement mortar (1:6), PCC bed (1:4:8) type D2 (using 40 mm graded crushed stone aggregate) 150 mm thick, cement plastering 15 mm thick in cement mortar (1:4) and applying two coats of synthetic enamel paint over a coat of primer to the steel surfaces including dismantling and removal of old unserviceble valve pit complete all as specified and directed.

All as per Srl item No. 14.00 above but of size 900 x 900 x 900 mm (internal dimension) complete all as specified and directed.

M&L for cutting existing road with width not exceeding 750 mm and 1.0 m deep for laying of water mains and filling back with excavated soil except road portion which shall be make good with cement concrete 1:2:4 type B1 (using 20 mm graded stone aggregate) complete all as specified and directed.

M&L for servicing of sluice valve cast iron body by greasing/ oiling using T&P as required as per manufacture instructions & providing glands rope of superior quality to stop any leakage of sluice valve of size 80 mm dia to 400 mm dia complete all as specified and directed.

S&F in repair brass check nut as per existing size suitable for CI Sluice Valve of 80 mm to 200 mm dia complete all as specified and directed.

All as per Srl item No. 18.00 above but of size 250mm to 300mm dia

S&F in repair cast iron non return valve, swing Horizontal type with rubberised steel ball and CI body flanged fixed between exit of the pump and delivery pipe line of size 150 mm bore complete all as specified and directed.

S&F periphery wheel of traction rail of clarifloculator complete with double bearing as per existing sample one including taking out old unsv one.

S&F in repair MS Pipes with double flanged including bends and fittings of size 400 mm dia, 6 mm thick complete for fixing with pump sets suction & delivery line and integrating with main existing Header line including using of gas welding for provision of bends, tees, and other minor modification works required at site all as specified and directed.

S&F in repair MS Pipes with double flanged including bends and fittings of size 100 mm dia, 6 mm thick complete for fixing with pump sets suction & delivery line and integrating with main existing Header line including using of gas welding for provision of bends, tees, and other minor modification works required at site all as specified and directed.

S&F MS flange 150mm suitable upto 400 mm dia MS pipe fixed by welding to MS pipe duly drilled holes as per site requirement for pump/sluice valve/NRV, including rubber insertion gasket, nut-bolts and 02 washers complete all as specified and directed.

M&L for MS Angle iron framed work as in grills grating for valve chambers, for base frame of pump sets etc using suitable size C channels & thick angle iron and 6 mm thick MS plate, framed guard bars including necessary locking arrangement complete all as specified and directed.

S&F in repair Single core multi stranded copper conductor PVC insulated heavy duty cable of 50 sqmm complete all as specified and directed. Make:- National Cables / Finolex / Havells / Plaza / Polycab or or other make as specified in Particular Specifications

M&L for repairing /servicing/ourhauling digital Electromagnatic flow meter of size 250 mm dia with replacemnet of following defective parts :- (a) Wireless Transmitter (b) Display box (c) SMPS (d) wireless receiver Note: Checking of complete wiring upto reciver with paity repairs , parts for functioning included in the quoted rate.

All as per Item No 27.00 but 300 mm dia

All as per Item No 27.00 but 400 mm dia

Taking out unserviceable LT connection cable of size up to 35 sqmm 3.5 core complete all as specified & directed.

Taking out old unserviceable LT cable of size 50 sqmm to 95 sqmm 3.5 core complete all as specified & directed.

Supply, laying and testing XLPE insulated and PVC armoured heavy duty electric cables with aluminum conductor, 1100 volt grade in trenches/through pipes/ducts or on poles/walls jointing to O/H conductor, LT panels, main switch with suitable size aluminum lugs and testing complete all as specified & directed for the following sizes:- Note : Excavation shall be measured and paid seperately

(a) 95 Sqmm 3.5 core

(b) 50 Sqmm 3.5 core

(c) 16 Sqmm 4.0 core

M&L for sand cushioning with fine dry unwashed sand in trenches for cushioning of cables complete all as specified and directed. Note:- Punned thickness will be measured.

Supply and laying of old size sub class ‘B’ bricks, laid in trenches as cable covers complete all as specified and directed.

S&F in repair 80 mm bore steel pipe, galvanised, light grade" in trenches, under floors, roads, along poles for protection of cable with all necessary fittings, including sealing ends complete all as specified and directed.

S&F in repair 40 mm bore steel pipe, galvanised, light grade" in trenches, under floors, roads, along poles for protection of cable with all necessary fittings, including sealing ends complete all as specified and directed.

Supply and rrrecting LT Panel outdoor type mounted and fixed with PCC foundation , made out of MS sheet factory assembled and factory fabricated out of 3.15 mm thick sheet steel with suitable size MS angle duly spray painted with two coat of gray synthetic enamel paint over one coat og red oxide zinc chrome primer after preparation of surface , with required civil work &wiring with copper cable of suitable size, connecting including indication lamp LED type foe each phase , incl inbuilt industrial type locking arrangments , front openable incl necessary arrangments for fixing with suitable, clamps,nuts, bolts wahers etc, & incl Danger notice board , feeder marked,testing and commissioning , size 600 x600x 300 mm, complete including taing out old panel complete all as specified and directed by Engr-in-Charge.

S&F cable path indicator made of MS sheet of size 200 mm x 150 mm x 3 mm thick and spot welding with angle iron of size 40 x 40 x 5 mm thick, 750 mm long embedded in PCC (1:2:4) type B-1( using 12.5 mm graded stone aggregate) including providing one coat of synthetic enamlled black paint over one coat of red oxide primer and sign writing with white paint showing size of cable HT /LT complete all as specified & directed .

Supply, installation, testing and commissioning out door type LT panel board ,made out of 3.15mm thick CRCA sheet , factory made, cubical type,with slanting top at leaset 10 Cm projection all around, fedder pillar type,fabricated with 50x50x6mm angle iron frame work with independent door for each feeder,busbar chamber cable tray on both side fully compartmentlized design, double door type & commen openable hinged door from rear side, floor mounting type, busbars made of aluminium duly insulated with heat retardent fire proof (HRFR) heat shrinkable sleeves of relevant colours.Bus bar shell be properly supported/mounted on epoxy insulators.All live parts and joints shall be insulated with (HRFR) shrouds, conforming to IS, including provn for connecting suitable earth strips,painting with one coat of anti corrosive coating and finally epoxy polyester powder coating of flint Grey shade (RAL-7032), Confirming to IP 54 protection and confirming relavent IS, comprising the adequate arrangement to supply & fix the following accessories,including connecting cable glands and cable lugs,fixing of earth lead to earth terminal of panel including necessary excavation & PCC foundation and taking our old panel complete all as specified & Directed by Engr-in-Charge.( Note:- Cost of all accessories are deemed to be included in the rate quoted). (LT Panel No.1,2 &3)

Incoming (a) Aluminium bus bar - 400 Amps rating - 03 Nos. for phases and 150 Amp rating - 01 No. for neutral

(b) MCCB 4 pole 250 Amps, 415 volt, 36 KA - 01 No ( incoming) (Make Legrand / L&T / ABB / Schneider)

(e) ON/OFF LED type indication lamp with toggle switch - Set of 03

Out going:- (a) MCCB 3 pole 160 Amp, 415 volt, 25 KA - 01 Nos (Make Legrand / L&T / ABB / Schneider)

(b) MCCB 3 pole 100 Amp, 415 volt, 25 KA - 02 Nos (Make - Legrand ,HPL,Havells or equivalent)

(c) MCCB 3 pole 63 Amp, 415 volt, 16 KA - 02 Nos (Make Legrand / L&T / ABB / Schneider)

(d) MCB TPN 40 Amp, 415 volt, - 2 Nos (Make Legrand / L&T / ABB / Schneider)

All as per item No 39 above but consisting the following items :-( LT Panel No 3,4 )

Incoming (a) Aluminium bus bar - 250 Amps rating - 03 Nos. for phases and 100 Amp rating - 01 No. for neutral

(b) MCCB 4 pole 200 Amps, 415 volt, 36 KA - 01 No ( incoming) (Make Legrand / L&T / ABB / Schneider)

(e) ON/OFF LED type indication lamp with toggle switch - Set of 03

Out going:- (a) MCCB 4 pole 100 Amp, 415 volt, 16 KA - 02 Nos (Make Legrand / L&T / ABB / Schneider)

(b)MCCB 4 pole 63 Amp, 415 volt, 16 KA - 02 Nos (Make Legrand / L&T / ABB / Schneider)

(c) MCB TPN 40 Amp, 415 volt, - 2 Nos (Make Legrand / L&T / ABB / Schneider)

S&F in replacement of OFF Load Change over switch of 63 Amps capacity 415 Volts, 4 pole, incl sheet metal enclosure as per the existing switch including taking out old existing unserviceable complete all as specified and directed. Make : Indoasian Cat part No OFFPO100/L&T/Havells/BENLO

S&F in replacement of OFF Load Change over switch of 125 Amps capacity 415 Volts, 4 pole, incl sheet metal enclosure as per the existing switch taking out old existing unserviceable complete all as specified and directed. Make : Indoasian /L&T/Havells/BENLO

S&F in replacement of OFF Load Change over switch of 160 Amps capacity 415 Volts, 4 pole, incl sheet metal enclosure as per the existing switch taking out old existing unserviceable complete all as specified and directed. Make : Indoasian Cat part No OFFPO100/L&T/Havells/BENLO

S&F in replacement of OFF Load Change over switch of 200 Amps capacity 415 Volts, 4 pole, incl sheet metal enclosure as per the existing switch taking out old existing unserviceable complete all as specified and directed. Make : Indoasian Cat part No OFFPO100/L&T/Havells/BENLO

S&F in replacement of OFF Load Change over switch of 250 Amps capacity 415 Volts, 4 pole, incl sheet metal enclosure as per the existing switch taking out old existing unserviceable complete all as specified and directed. Make : Indoasian L&T/Havells/BENLO

S&F in repairs MCB TPN, 415V, 40 Amps, 'B' series complete including all connections complete all as specified and directed.

Supply and fix in repairs MCB TPN, 415V, 63 Amps, 'B' series completecomplete including all connections complete all as specified and directed.

Supply and fix in repairs MCB SPN, 32 Amps, 240V, complete complete including all connections complete all as specified and directed.

M&L for earthing complete (in replacement) with galvanized mild steel earth plate electrodes 600x600x6mm thick buried directly in ground to a depth not less then 2.25m deep below ground level with top edge of the plate not less then 1.5 m below normal ground level surrounded with adequate quantity of charcoal dust mixed with salt to a packed thickness of 15 cm all around to the plate, using GI strip 32 x 6 mm as earth strip electrode bolted or rivited to earth plate at one end and connected to equipments at another end, GI earth strip encased in and including 50 mm dia GI light grade pipe from upper end of earth plate up to equipment 20 mm dia bore GI pipe light grade as water pipe from earth chamber to upper edge of earth plate, Test point, GI funnel with wire mess fixed on water pipe and PCC 1:2:4 type B1(using 20 mm graded crushed stone aggregate) as in pit chamber and RCC pit cover 80 mm thick precast RCC 1:2:4 type B1 (using 20 mm graded crushed stone aggregate) cover with 10 mm dia MS TMT bar as in lifting handles, excavation, earth work including laying of GI Pipe concealed in floor and wall all as described in electrical plate of SSR Part-I including testing on completion complete all as specified and as directed.

(i) The unit rate shall include for protection pipe, GI water pipe, wire mesh, funnel, excavation, RCC pit cover, test point, 30mm x 6mm GI strip from top of earth plate upto 5 metre above ground level and if GI protection pipe is less than 5 metre, no price adjustment shall be made.

(ii) RCC pit cover shall be precast of RCC 1:2:4, type B-1, 80mm thick reinforced with XPM weighing not less than 4 Kg/sqm in lieu of cast iron cover

Dewatering the equalisation tank of cap 300 KLD with the help of mud pump and removal of complete sludge and cleaning inside, descaling internal surface of tank with wire brush and scraper, washing with fresh water two times with bleaching powder all as specified and directed by Engr-in-Charge. Note :- (a) Making temporary arrangement for pumping out the raw sewage effluent from manhole near the equalisation tank to a distance of appx 100 mtrs from the STP during cleaning period of equalisation tank, cost incurred is deemed to be included the quoted rates. (b) While cleaning the tank contractor shall ensure necessary safety precautions and to arrange safety mask, Hand Gloves etc. (c) Arrangement for sludge pump to pump out the settled sludge in equalisation tank and manhole is to borne by the contractor , cost incurred is deemed to be inclusive in the quoted rate.

All as per Item No 50.00 above but capacity 230 KLD complete all as specified and directed

All as per Item No 50.00 above but capacity 120 KLD complete all as specified and directed

M&L for dewatering with the help of Mud Pump and manning for cleaning of MBBR Tanks of compartments of STP of capacity 230 KLD installed at PW Div and removing all the settled solid sludge or any other type of material and applying two coat water proof anti corresive enemel paint through brush/ spray gun inside and out side the tank and through out side for a minimum distance of 100 Mtrs from STP complete all as directed by Engr-in-Charge.

All as per Item No 53.00 but capacity 120 KLD complete all as specified and directed

All as per Item No 53.00 but capacity 300 KLD complete all as specified and directed

M&L for dewatering with the help of Mud Pump and manning for cleaning of Tube settler Tank of STP of Capacity 300KLD installed HP Encluve removing all the settled deposited Sludge/ fungus or other type of Bio fouling and cleaning inside, descaling internal surface of tank with wire brush and scraper, washing with fresh water two times with bleaching powder applying the two coat anti corrosive water proof enmel paint with brush /spray gun complete all as directed by Engr-in-Charge

All as per Item No 56.00 but capacity 230 KLD complete all as specified and directed

All as per Item No 56.00 but capacity 120 KLD complete all as specified and directed

M&L for removing the dry sludge from the sludge drying bed, monthly basis and loading to a suitable transport and transporting for disposing regularly during period of operation complete all as directed by the Engr in charge. (Note:-For 120, 230, 300KLD)

Testing of treated water sample, once in every three month by sending the water samples to the authorised laboratories for the following parameters:- (Note:-For 120,300 & 230 KLD) a) PH : 5.5 to 9.0 (SPCB Limit) b) BOD: 10 mg/L Maximum (SPCB Limit) c) Turbidity : 5 NTU Maximum (SPCB Limit) d) Total Suspended solids : 30 mg/L Maximum (SPCB Limit) e) Residual chlorine: 1.0 mg/L Maximum (SPCB Limit ( f) E. Coli: Nil CFU (SPCB Limit) (g) COD : 50 mg/l (SPCB Limit)

Supply only Bleaching powder grade -I ISI marked having stable available chlorine % by mass minimum 35% as per IS 1065,1971 and packed in 25 Kg bag complete all as specified and directed. Make :- Vikram Pac or other make as approved by GE.

Supply only Poly aluminium chloride in Powder form Gde-medium basicity for purification of water complete all as specified and directed. Make :- Vikram Pac or other make as approved by GE.

Supply only sodium Hypochlorite solution complete all as specified and directed.

Repair and overhauling including dismantling / taking down all electrical and mechanical connection of Air blower including motor installed at STP and servicing whole body, replacing gear oil/ lubricant and V belt, overhauling and testing including painting of complete body and air outlets complete all as specified and as directed Note:- The following Spares and gear oil/ lubricants in adequate qty for one Air Blower should be provide by the contractor and the rate for the same shall deemed to be included in the quoted rates:- (a) Servo Gear oil Super 90 - 5 Ltrs (b) Bearing for Air blower and motor as per sample -1 (c) Oil Seal as per existing size -1 (d) Gasket Kit as per existing size -1 (e) Oil Seal As per existing size -1 (f) V Belt as per existing size -1 (g) Air filter as per existing size -1

Dismantling the electric induction motor 415 volts AC 3 Phase, capacity 5 to 7 HP, 440 V, 50Cycle of any make and type from the foundation and pump after disconnecting electric cable connection and earthing etc. and transportation to civil workshop for repair/rewinding, strip opening the motor and removing of defective burnt winding, ball bearing, bush, rewinding the motor after cleaning the rotor and stator with super enamelled copper winding wire of suitable turn and gauge as per the original with proper insulation including varnishing, providing ball bearing, bush, all high grade material and class ‘B’ varnish for insulation & replacing the u/s nuts, bolts, washers of appropriate size and reassembling the complete motor and re-fixing, proper alignment, coupling with pump including connecting the existing electric cable connection, earthing, and testing the motor on full load up to entire satisfaction of Engineer-in-charge all as directed and as specified. Note :- (i) Super enamelled copper winding wire shall be measured and paid separately under appropriate item of this DCS in supply only. (ii) The T & P/ vehicles will be arranged by the contractor and the cost deemed to be included in the quoted rates.

All as per Item No 65.00 but electric motor of capacity upto 2HP complete all as specified and as directed by Engineer-in-charge

Supply only in repair supper enamelled copper winding wire for rewinding the electric motors Note:- Labour for motor winding shall be measured and paid separately under appropriate item of this BOQ.

M&L for MBBR media made out of poly propylene with virgin plastic, UV stabilised of specific gravity 0.95 to 0.98 packed bag 12 kg complete all as specified

M&L in replacement of tube settler modules made of PVC complete all as specified and as directed.

M&L for dismantling and taking down the complete pipe line of STP's for descaling including painting the outer surface of pipe and refixing the same and testing for leaks and replacing the complete nuts, bolts, washers and rubber gaskets etc complete all as specified and as directed.

M&L for replacement of fine coreus sand filter media and cleaning of PSF tank including taking out old media out side for a minimum distance of 100 Mtrs from STP all as directed by Engr-in-Charge.

M&L for replacement of carbon filter media and cleaning of ACF tank including taking out old media out side for a minimum distance of 100 Mtrs from STP all as directed by Engr-in-Charge.

M&L for Pressure gauge, analogue type of range up to 22 kg/sq.cm including taking down the existing unserviceable pressure gauge all as specified and directed.

M&L for Writing letters or figures (Block, Roman, Italic or Indian) not exceeding 15cm height with white synthetic enamel paint over a coat of black colour paint all as specified and as directed.

M&L for complete repair, overhauling and maintenance to chlorination dozing plants sodium hypo chlorite solution type of any make & model, including replacement of unserviceable motor, repairs to pump and replacement of injection check valve, 3/8'' white suction/discharge tubing & fixing new injection check valve, 3/8'' white suction/discharge tubing etc replacement of following spares:- (a) Non return valve (b) LDPE Pipe (c) Discharge valve (e) suction valve (g) foot valve assembly (l) pressure relief valve (u) gear plate (t) motor gasket (v) mounting base (r) spring plate

S&F in repair FRP type solution preparation cum settling tank of capacity 100 ltrs with level guage, lid,inlet/outlet,drain connection and fitted with speed reducer,motor and SS/PVC agitator complete all as specified and directed by Eng-in-charge

M&L for cleaning of Raw water collection chember with help of manning for removing sludge/oil/grease from screening bar chember, raw water tank, oil and grease removal chember complete all as specified and directed.

M&L for dismantling mono block/centrifugal pump set motor of capacity 5 HP.from the existing foundation after disconnecting the inlet / out let pipe connections, disconnecting electrically and taking to civil authorised KIRLOSKAR dealer workshop for repair, strip opening and repairing of pumping sets by replacement the worn out defective/unserviceable parts such as bearing, bush, gland rope, check nut, shaft sleeves etc. complete. Reassembling including oiling, greasing replacement of worn out nuts, bolts, gasket etc, and re-fixing in its original position at site, making all connections, commissioning and testing for smooth and noise free operation including bringing back the same from workshop after necessary servicing and testing the same after proper mounting/refixing for entire satisfaction of Engr - in - Charge complete all as specified and directed.

M&L for disconnecting/ removing the defective starter from the LT panel board and Supply & fixing new CosmicStar-Reversing Starter 415 volts 3 phase with single phase protection feature with overload relay range 7 to 10 Amp and Contactors suitable for 5 HP electric motor at the existing panel board in position and making electric connections complete all as specified and as directed by Engr-in-Charge.

S & F in replacement XLPE insulated and PVC armoured heavy duty electric cables with aluminum conductor, 1100 volt grade of size 2 core 10 sqmm in trenches/through pipes/ducts or on poles/walls jointing to O/H conductor, LT panels, main switch with suitable size aluminum lugs and testing complete all as specified & directed Note : Excavation work shall be measured and paid seperately

All as per Item No 80.00 but 16 Sqmm 4 core.

S&F in replacement LED street light fitting 60 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection complete all as specified & directed

S&F in replacement LED street light fitting 70 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection complete all as specified & directed

Supply, fixing, laying and jointing in repair of PVC /ASTM pipe with all necessary fittings complete all as specified and directed

M&L for repair of sprinklers head with tripod stand with accessories connecting assembly complete all as specified and directed.

MODI CORPORATION (BID ID -3156168)

Vinayak Trading House (BID ID -3157350)