Renewal of BT road Surface work Chinnasamypillai street (115063R02094),Pallavan Nagar 1st street (115063R02023)and Removing and Refixing Paverblock

Providing and laying, spreading and compacting 0.396m3 of 45-22.40mm &0.528m3 of 22.40-2.36mm &0.396m 3of2.36mm and below metal graded stoneag gregate to Wetmixmacadam (WMM) soecification including premixing the material with water at OMC in mechanical mix plant carriage to mixed material by tipper to site laying in uniformlayers with paver in subbase /base course on wellprepared surface and compacting with vibratory roller to achive the desired density complete as per clasue 406 of MORTH specifications.

Providing and laying Prime Coat of 7kg/10sqm over the WMM surface treated with primer using 7 kgs of bituminous Emulsion (SS) for 10square meter area including cost of bituminous binder including labour charges for applying the required quqntity of bituminous binder as prime coat manually etc., complete as per 502 of MORTH Rev-5 Specifications.

Providing and laying Tack Coat over 2.50 kgs/10 sqm over the WMM surface treated with binder using 2.5kgs of bituminous Emulsion (RS) for 10square meter area including cost of bituminous binder including labour charges for applying the required quqntity of bituminous binder as tack coat manually etc., complete as per 503 of MORTH Rev-5 Specifications.

Providing and laying tack coat of 2 kgs/10 sqm over the BT surface treated with binder using 2 kgs of bituminous Emulsion for 10 square meter area including cost of bituminous binder, including labour charges for applying the required quantity of bituminous binder as tack coat manually etc., complete as per 503 of MORTH Rev V Specifications

Providing and Laying 50mm consolidated thick Dense Bituminous Macadam using 0.24 cum of 26.5-13.2mm, graded metal and 0.25 cum of 13.20-2.36mm graded metal and 0.23 cum of 2.36 mm & below and with 53.20 Kgs of 60/70 bitumen for premixing per 10sqm including cost and conveyance of all materials to CMP site, heating the bitumen and aggregate to required temperature and mixing them in required temperature in central hot mix plant 20 – 30 ton capacity, Conveying the mix by tipper trucks to paver site, spreading the mix in required temperature for uniform thickness of 50mm with mechanical paver to the specified grades and crosssections and compaction by Vibratory roller to there quired density etc., including labour charges for loading bitumenin to bitumen tank and metalt of eder unit ,labour for attending to paver site etc.,including hire charges and fuel charges for 20-30t CMP with bitumen boiler, tipper trucks, paverfinisher, vibratory roller sand all other tools and plants required, including all other incidental charges etc.,complete using CMP clause 505of MORTH Rev-5 specifications.

Providing and laying Bituminous Concrete to 30mm/40mm thick using 0.13 cum of 19.00 - 9.50mm, 0.17cum of 9.50 -2.36mm and 0.26cum of 2.36 and below with 50.30kgs of VG30 / VG40 bitumen for premixing per 10sqm including cost and conveyance of all materials to CMP site, heating the bitumen and aggregate to required temperature and mixing the min required temperature in central hot mix plant 20-30ton capacity, conveying the mix by tipper trucks to paver site, spreading the mix to uniform thickness of 30mm with mechanical paver to the specified grades and cross sections and consolidated by 8-10tonne Vibratory / Pneumatic Roller to the required density etc., including labour for attending to paver to site etc., including hire charges and fuel charges for 20-30t CMP with bitumen boiler, tipper trucks, Paver Finisher / 9m paver finisher, Vibratory / Pneumatic roller and all other tools and plant required, including fuel and all other incidental charges etc., complete as per specification using CMP as per clause 507 of MORTH Rev-5.

Providing and laying of hot applied thermoplastic compound 205mm thick including reflect rising glass beads @ 250gms.per sqm.area.thickness of 2.5mm is exclusive of surface applied glass beads as per IRC :35. The finished surface to be level uniform and free from streadks sdand holes etc complete.(as per MORT & H Specification no803)

Removing the Existing Paver block M40 grade 80mmthick in the the rate including Removing and Stock to the Same Site and tranporting loading unloading and Labour Charges and Other tools etc. complete as per standard specification,.

Refixing the Existing Paver block M40 grade 80mmthick in the the rate including Removing and Stock to the Same Site and tranporting loading unloading and Labour Charges and Other tools etc. complete as per standard specification,.

Supplying and laying Rubberised inter locking Paver block M40 grade 60mm thick high strength type conforming IS15658-2006 of rubberized inter locking paver lock in size of minimum compressive strength of 40N/mm2 in uniform shape of approved make tobe laid in flurring bone pattern with stone dust cushion below the uniform shap of approved nonskitting surface in the top and the rate including levelling the base preparation of pavers as subbase, stone dust cushion 150mm thick laying out of pavement cut the pieces to fix the edge vibring the pavers, sweeping tranporting loading unloading of laying paver block as per standard specification,.

Supply of FRC Manhole 600 mm size dia cover with frame including cost of conveyance loading fixing the same etc complete

Raising the existing circular man hole in heavy type including the removing the existing the man hole cover with frame and dismantling the existing the cement concerte wall end tar road surface around the manhole using 1 : 2: 4 20mm jelly for raising the existing the manhole wall and using CC 1:2:4 with 20mm grainte chips for finshing the top surface manhole around etc complete.

Please Enable Macros to View BoQ information