SPECIAL REPAIRS TO BUILDING NO P-18 OF 2 TRG REGIMENT MAIN OFFICE WING -1 AT ARTY CENTRE UNDER GE NASIK ROAD CAMP

Amount

Taking down carefully existing bitumen tarfelt incl. screed and cleaning of surfaces of roof etc. with wire brush incl. flashing and junctions of parapets / kerb walls etc. and removing of the rubbish to a distance exc. 500 metres but not exc. 1.5 km and depositing where directed

Demolition of cement concrete (un reinforced) of any description and in any position not otherwise specifically provided for.

Dismantling floor, hearth or wall tiling including cement mortar bedding (But not backing) removing serviceable tiles to store and rubbish off the premises complete all as specifed and directed

Dismantaling of stone slabs of any descripation or thickness in floors, aprons etc laid bedded & pointed in any mortar complete all as specifed and directed

Demolition of cement concrete in ground floors and pavings n.exc 15cm thickness(Below or above ground level) un-reinforced complete all as specified and directed.

Demolition of RCC in cover slab

M&L Screed bed or bedding layer of cement mortar 15 mm thick for laying floors finishes in cement mortar 1:6 complete all as specifed and directed

S&F Machine cut cudappa stone slab 20-25 mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete Note: screed bed layer measured seperately complete all as specifed and directed

M&L granite (of any type)work (table rubbed and polished)20 mm thick in steps,jambs,pillars,cooking platforms and like in cement mortar 1:4 incl pointing in white cement 1:2 using marble dust with admixture of pigment to match the shade of granite

Rounding to edges of stone slabs one edge such as in steps cooking platform and other similar work

M&L rough shahabad stone slab 25mm to 30mm thick in flooring/plinth set and jointed in neat cement slurry and pointed in CM 1:4 complete all as specifed and directed

M&L for rendering 15mm thick in CM 1:4 as in backing coat plaster on surfaces of stone masonary surfaces complete all as specifed and directed

M&L Non Skid ceramic tiles 7 to 8mm thick joint free coloured tiles area of each tile exc 0.18 sqm but not exc 0.36sqm in floors set and jointed in neat cement slurry complete all as specifed and directed

M&L for glazed ceramic tiles coloured size 300 x 200 x 7mm thick as on vertical surfaces, of walls as in skirting, dado etc set and jointed in neat cement slurry & pointed with coloured cement to match complete all as specified and directed

M&L PCC 1:4:8 type D2 (using 40mm graded aggregate as in sub base / foundation filling mass concrete complete all as specifed and directed

S&F in repair vitreous china bowl urinal flat back size 465x355x265 mm white with grating spreader and union and discharge pipe complete all as specifed and directed

M&L for preparation of old distempered surfaces of walls by washing, rubbing down,stopping and applying two coat of oil bound distemper on walls.

M&L two coat of white wash including preparation of old surfaces on ceilings

Demolition of RCC of any description and any position not othervise provided for Rcc tank and sun shade

S/F Rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position of capacity 1000 ltr.

S&F bib taps, fix cast copper alloy with crutch or butterfly handle, fancy type chromium plated screwed down, screwed for iron pipe or for brass ferrule and fixing 15mm bore dia complete all as specified and directed.

S&F for 25mm Gun metal,globe or gate valves,with iron wheel head,screwed both ends for iron pipe and fixed

S&F Ball brass valves, high pressure, with polythene float and flynut for 25 mm bore dia pipe complete,screwed for iron pipe or brass ferrule and fixed

M&L for PCC (1:2:4) type B1 using 20mm graded stone agg., for filling up the undulation on RCC roof slab, roof kerbs etc. to maintain slope all as specified and directed.

Preparing existing roof surfaces and applying cement slurry @ 3 Kg per Sqm all as directed.

M&L Rendering 10mm thick in cement mortar (1:4) or fair faces of concrete surfaces mixed with water proofing liquid and smooth finished and smooth(without using extra cement).

Supply only water proofing liquid all as specified and directed.

M&L for waterproofing on roof including flashing and junction of parapet, kerb wall etc.as under (a)Applying bituminous primer on cleaned and dried surface @ 0.2kg/sqm (b) A coat of hot blown type bitumen of grade 85/25, applied hot @ of 1.25kg/Sqm. (c ) laying by thermo fusion ( torch applied ) 3 mm thick App based polymeric water proofing membrance weighing not less than 3.5kg/sqm and reinforced with polyster non voven fabric ( not less than 150 gms/Sqm (d) Painting the exposed App membrane surface with bitumenous aluminium paint @ 0.15kg/Sqm.

M&L providing cement concrete 1:2:4 type B1, (20mm graded agg.) in kerbs incl. weathering slightly rounded edges

Taking up or down tubes galvanized iron and connections and fittings or removal from site as incl cleaning for refixing where directed complete all as specified and directed.

(a) 15 mm dia

(b) 20 mm dia

(c) 25 mm dia

Re-fixing only tubes galvanized iron and connections fixed to walls or laid in floor supplying & fixing new fittings such as socket, bends, elbows nipple, union etc all as specified and directed of size complete all as specified and directed

(a) 15 mm dia

(b) 20 mm dia

(c) 25 mm dia

S/F for tubes medium grade, galvanized with iron all fittings fixed to walls, ceiling and laid in floor of sizes complete all as specified and directed :-

(a) 15 mm dia

(b) 20 mm dia

(c) 25mm dia

Taking down cement plaster of any description on brick or stone walls or concrete surfaces etc. incl raking out joints, hacking for key scrubbing down with water etc

M/L rendering 15 mm thick cement mortar on stone surfaces with cement mortar 1:6 finished with thin layer of sagol finish on plastered surface of internal wall Note:-repair wall and Roof sheet gap filling.

S&F PVC (SWR) pipe single socketed 110mm bore any length with rubber ring joints fixed to wall complete all as specified & directed bore of pipe in mm complete all as specifed and directed

S&F of PVC(SWR) bends of any radius

(a) 75 mm dia

(b) 110 mm dia

S&F of PVC(SWR) 'P' trap of 125/110 mm bore

S&F of PVC(SWR) bends of 110 mm bore

S&F in repairs of PVC(SWR) branch piece,single(single Y) equal or unequal and making good

(a) 75 mm dia

(b) 110 mm dia

S&F in repairs PVC(SWR) floor trap,plain with grating including jointing with solvent cement and making good

S&F of PVC(SWR) vent cowl of 110 mm bore

Vitreous China wash down water closet pan (pedestal pattern), hite (excludingfixing bolts, flushing cisternand flush pipe) fixing in repair complete all as specified and directed

S&F hand spray (Health faucet) 1 mtr PVC tube 15 mm bore with wall hook (CP) make : Jaguar or equal make fixed in repairs

S&F in repair stainless steel sink made of stainless steel 1mm thick with out drainage board including plugs, washers and wastes including bedding in cement mortar to dwarf wall or including fixing contilever brackets and connecting union to pipe overall size 495mm x 420mm bowl size410mmx330mmx160mm complete all as specifed and directed

S&F in repairs PVC valveless,symphonic action type,flushing cistern ,low level white,with inlet,ball valve,float and handle including brackets of 10 ltrs

S/F PVC connections 15mm size with PTMT nuts of length 300mm.

S&F stop valve, 15 mm bore dia fancy type chromium plated with long shank high pressure with crutch or butterfly handle screwed both ends for iron pipe or for unions and fixed as specified and directed

S&F for Low density polyethylene pipes of Bore 32 mm of pressure rating 6 kgf/cm2 fixed complete to walls ,ceilings or in floors

Supply & fixing fancy type piller tap cast copper alloy with capstan head, chromium plated, screwed down high pressure suitable for 15mm bore

Repairing broken edges of RCC chajjas, roof projections, fins, facia and similar works by dismantling of loose and damaged/ disintegrated portion of edges (cross sectional aerea not exceeding 150 sqcm) and making good with cement mortar 1:4 or cement concrete 1:1½:3 type A0 and chicken wire mesh with nails (to hold fresh mortar/concrete) including necessary formwork etc. and scaffolding for work upto four storied buildings and finishing the surface by white wash or cement base paint to match the surface with existing work.

M&L for special treatment to sunken portion with 10 mm thick plaster in CM 1:4 with WPC liquid conplast 421 and applying one coat each of Nitoproof 100 & Nitopro 120 on plastered surface . Rendering again 10 mm thick plaster in CM 1:4 mixed with complast 421 in sunken portion of WC & CI/PVC pipes joint shall be filled/jointed with mixture of cement fine sand and nitoproof 130 and provided hole in the wall & fixed 600 mm long 20 mm dia spout light grade & 1:3:6 type C2 concrete filling , floor area of wc upto 1.5 Sqm etc complete all as specified and directed.

M&L for keyed pointing of CM 1:4 to random or polygonal rubble;uncoursed or brought upto course

M & L for reinforced concrete pipes class NP-2 and of dia 150mm laid and jointed complete with collars

M&L for providing precast reinforced cement concrete 1:2:4 type B-1 (using 20mm graded aggregate) set in CM (1:6)as in landing covers etc complete all as specifed and directed

M/L mild steel TMT bars 8mm dia cut to length bent to shape required and binding with ms wire anealed not less than 0.9mm dia, complete all as spacified and directed.

M&L PCC 1:3:6 type C1 (using 20mm graded aggregate as in surface channels and drains including necessary form work complete all as specifed and directed

M&L for plain cement concrete 1:3:6 type C1 (using 20mm graded stone aggregate) as in coping

S&F aluminium anodised frame for doors, windows, ventilators, powder coated (min thickness 50 microns) complete all as specifed and directed

Aluminium anodised powder coated window and ventilator shutter, Sliding/Fixed type with/without sash bar, alumn section section weighing 0.25 kg per mtr incl necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws and suitable locking arrangements etc complete all as specifed and directed by EIC.

S&F frosted glass 3 mm thick nexc 0.5sqm each pane complete all as specifed and directed

S&F Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperature 1.40mm complete all as specifed and directed

M/L for Hard core of gauge n.exc 63mm deposited spread levelled in layers n.exc 15cm thick watered and rammed to a true surface using broken stones boulder complete all as specified and directed.

M&L for cement concrete type E-2 1:5:10 (40 mm graded aggregate) under floors

S&F precast rubber moulded polished machine pressed precast cement concrete inter locking pavers block any shape & size confiming to IS 15658-2006, 50mm thick as in pavements including provision of laid on 30 mm thick stone dust cushioning laid dry to the profile any in pointed in CM (1:2) all as per manufacturers instructions complete all as specified and directed by Eng-in-Charge complete all as specified and directed.

Dismantling of wrought or mild steel work of any description not otherwise provided for

M&L collapsible steel gate , top hung, consisting of channel pickets, pivoted flat bars, top and bottem ranner, brass handles etc as specified erected in position and securing ranners with hold fast and brackets complete

M&L two coat of synthetic enamel paint over one coat of red oxide primer on new steel surfaces, girth or width exc 10cm

S & F Solid PVC frame of size 50mm x 95mm made out of 5mm thick plain colour PVC sheet reinforced with MS square tube, with necessary arragement for fixing of glass for louvers type window/ventilator and additional PVC beading around the frame for fixing of wiremesh, S & F in opening all as specified and directed by Engr-in-Charge

Taking down PVC chowkat or frames with shutters (without taking off shutters from the frame) not exc. 2.0 Sqm each. Complete including removing from site by each contractor at his own expense all as specified & directed.

S&F solid PVC door frame of size 50mmx47mm made out of 5mm plain coloured PVC sheet reinforced with MS square tube S&F in opening as per specification and drawing

S&F factory made soild panel PVC door shutter 30mm thick (style) consisting of frame made out of MS tubes for top & bottom rails. MS frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles & plain colour PVC sheets for top rail,lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; panelling of plain colour PVC sheet to be fitted in the MS frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification and drawing.

S&F 100mm stainless steel butt hinges medium weight all as specified and directed

S&F aluminium alloy barrel tower bolt 150 mm long

S&F 150 mm aluminium alloy handels cast/plate type

Taking down carefully copper/aluminium point wiring (light, fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendents, regulators, sockets, light fittings etc removing materials to store for keeping in safe custody or for taking credit and making good disturbed surfaces of walls, floors, etc ( note -(1) credit for above items should be made as per conditions separately. (2) old servicable switch/socket/regulater/switch-socket/call bell/bell push shall be deposited to AGE E/M yard and reused against apropriate items, all as specified and directed by Engr-in-Charge)

Taking down unserviceable/partly serviceable light fittings any type, tube light fitting and fixtures, etc, and making good to the disturbed surfaces of walls/floor etc to macth with existing surfaces including white washing/colour washing/distempering to match with existing wall/floor/ceiling finishes.(NOTE- old serviceable fitting shall be deposited to AGE E/M yard and reused against apropriate items, all as specified and directed by Engr-in-Charge)

Taking down and hanging during point wiring of ceiling fan/exhaust fan of any size and sweep in proper manner and making connection withT 3 core copper cable all as per specified and directed by Engr-in-Charge

Dismantling unserviceable main switch/DBs wih MCB incl wooden board and deposit to MES store yard including making good disturbed surface of wall

Taking down sub main wiring of any size/capacity complete all as specified and making good disturbed sufaces to match with the existing surfaces.

Point wiring with PVC insulated unsheathed stranded copper conductor cable of size 1.5 Sqmm, with PVC insulated unsheathed stranded copper conductor cable of size 1.5 Sqmm stranded for earth continuity wire, to be drawn in and including, PVC medium grade surface casing capping not less then 20 mm width with MS sheet metal sunken switch/Terminal box 1.2 mm thick and ebonite switch board cover 3.0 mm thick or PVC moulded switch board and brass screws with cup washers including all necessary wall cutting and making good disturbed surface all as directed and specified .Note : Cutting chases and making good to match with the adjoining surface shall be included in the unit rate.

(a) One light point controlled by one, one way switch

(b) One ceiling /exhaust fan point controlled by one switch and regulator

(c) One 3 pin 5 amp socket out point on the same board with other switches.

(d) One3 pin 5 amps socket out let point on independent board

(e) One bell/buzzer point controlled by one bell push.

All as per same in item No 80 above but for one socket outlet 15 amp on independent board with 2.5 Sq. mm cable and 2.5 Sq.mm. earth wire.

S &F Switch piano flush type single pole one way 5 amps.

S &F Socket out let 2 in one, 5/3 pin 5Amp

S &F Switch socket combination 5 Amps 5 pin flush type

S &F Switch socket combination 5 in 1, 5 pin 5/15 Amps flush type universal .

S &F Ceiling rose, surface bakelite 65x50 mm three terminal

S &F Call bell AC-230 Volt single pole ding dong

S &F Bell push, flush type 5 Amps.

S &F Electronic regulator 100/120 Watt step type Notes for Item ser No 82 to 89 Make - Crompton/Anchor/Standard/Havells/Philips/Siska

S&F in repair 20 Watt Batten (4 feet) suitable for LED T8 lamps decorative luminaire designed for LED Tube comprises of CRCA pre coated housing with two colored plastic End cap. Crompton Cat Ref : DMLN1LT8-16 , Havells Cat No: REGALBATTENT 8UPTO1X22WDSBSWH, or eqvt of Bajaj/Polycab/Philips

S&F 20 Watt LED Tube Light (4 feet) comprises of extruded Strip in thermally conductive material & extruded housing in Optically efficient material milky white with inbuild split LED driver at the end of LED tube & FR grade engineering plastic End. Make : Crompton Cat Ref :LT8-20-865-2, Havells Cat No: CRYSTAL 1213T8DSTL20WLED865SGLASS or eqvt of Bajaj/Polycab/Philips

Refixing of tube light from exisiting position to new position as required at site all as directed and specified . (Note:- The old serviceable fittings will be used as removed against item No-76 above)

S & F 15 Watt LED streetlight fitting luminaire comprises of pressure die cast aluminium housing powder coated in silver grey and toughnedglass. This luminaire is recommended for illuminating access roads, Garden ways, small streets etc. IP65 protection , including coneecting up with 2/3 core flexible coppper conductor cable , compete all as specified and directed by Engr-in-Charge. Make : Crompton Cat Ref : LSTS-15-CDL, Havells Cat Part No- ENDURAPEARLSL15WLED757SASYTOPC or eqvt of Bajaj/Polycab/Philips/Shakti

Fabrication,supply & fixing of GI pipe bracket up to 40 mm dia- 0.9m long & 2 set of clamps made out of 30x5mm ms flat & fixed with anchor bolt suitable for any type and size LED security light fitting

S & F in repair for sub main wiring power/circuit using PVC insulated unsheathed, stranded copper conductor cable 2 Single core of size 6 Sqmm, earth continuity conductor of size 6 Sqmm to be drawn through and including PVC CASING CAPPING not less then 32mm medium Grade fixed on walls/roof/floors all as directed by Engineer in Charge. Notes:- Two wires of 6 sqmm and one wire of 6 sqmm and one run of PVC casing capping shall be measured as one unit.

S & F 4 way MCCB powerline vertical DBs in double door suitable for TP/FP MCCB SKB 1/2 as incomer bus bar with current rating capacity upto 250A, complete all as specified and directed by Engr-in-Charge, of make Standard Cat Part No-DSDLVDRBAOFO04, Legrand, Cat part No. 5077 25, or eqvt of Havells/L&T

S & F in repair for MCB DB made of sheet steel , powder painted with NUTRAL bus bar 200 A, neutral link, IP-43-IK09 protection grade , 415 Volts TPN with 4 way Double door , Make :- Standard/Legrand/Havells/L&T.

S & F in repair, MCB DB made of sheet steel , powder painted with NUTRAL bus bar 200 A, neutral link, earth bar and Din rail , 240Volts SPN with 8 way Double door , IP-43-IK09 protection grade Make-Legrand/Standard/Havells/L&T

NOTE FOR ITEM NO 96-98- (1). The unit rate includes for cutting the brick walls to accommodate DB to make flush to wall./ DB to be fixed on wall including frame made out of MS flat 40x5mm (2). The unit rate includes for making good the disturbed surfaces including finishes to match with the adjoining surface (3) MAKE OF DB & MCB - Legrand/Standard/Havells/L&T (4) Rate is inclusive of cutting chases & flush to wall & making good to the disturbed surfaces of walls etc to macth with existing surfaces including white washing/colour washing/distempering to match with existing wall/floor/ceiling finishes making good disturbed surfaces of walls, etc

Supply and fix in repair for MCB TPN 415 Volts, 'C' series, breaking capacity 10 KA of rating 63Amps

Supply and fix in repair for MCB SPN 240 Volts, 'C' series, breaking capacity 10 KA of rating 32-40 Amps

Supply and fix in repair for MCB SP 6-32 Amps 'C' series, breaking capacity 10 KA of rating

S & F in repair MCCB TPN 63 Amps , 415Volts, 25KA ,4 pole, (Make - Legrand , Cat Part No. 4200 53, or equivalent of Havells/Standard/L&T)

Earthing complete with galvanised steel earth plate electrode 60cmx60cmx6mm thick buried directly in gound (Earth pit not less than 2.25 metres deep below normal ground level) with top edge of plate not less than 1.5 mtr below normal ground level connecting to the galvanised iron earth lead wire of 4 mm dia by means of bolts, nuts, check nuts and washers of galvanised iron and earht strip protected by provision of GI light grade pipe 15 mm light grade bore including provision of pit in PCC (1:2:4) type B-1 using 20 mm graded of stone aggregate with PCC cover including 20mm bore pipe for wetering perforated at bottom 1.75 mtr long placed on top edge of earth plate common salt and charcoal (not less than 40 Kgs, 80 Kgs each) filling with fixing arrangement funnel wire mesh and earth work in hard dense soil returning filling in and removal of surplus soil to a distance not exceeding 50 mtrs all as per electircal plate No 03 of SSR-2009 Part-I and connecting to earth test point all as specified or indicated including testing on completion.

SHILPVED

UNITED ENTERPRISES

M/S GURBAX AND CO

Alpha Construction

Vinod Enterprises

M/S MK Nair