Provn of Jafri Wall around family ward at MH Gaya at Mil Stn Gaya

Amount

Excavating in trenches, n exc 1.5 m wide and n exc 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sq m on plan and n exc 1.5 m in depth and getting out in soft/loose soil

Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cm

Removing excavated material n exc. 50m and depositing where directed at a level n exc. 1.5 m above the starting point of soils all as specifed and directed.

M&L for PCC (1:4:8) type D2 (using 40mm graded aggregate) in foundations, filling and mass concrete complete all as specified and as directed.

M & L for RCC M-25 Design Mix (using 20 mm graded stone aggregate) as in foundations, incl rafts, footings, foundation beams; plinth beams; bases for columns,basement slabs,under-reamedpiles and mass concrete complete all as spfd & directed.(Note :- Reinforcement shell be measured ane paid separately under respective item)

M & L for RCC M-25 Design Mix (using 20 mm graded stone aggregate) as in columns, pillars, piers, posps, struts and coping complete all as spfd & directed.(Note :- Reinforcement shell be measured ane paid separately under respective item)

M & L Formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams;and similar work;vertical or to batter complete.

M&L Formwork to sides of pillars,posts, struts, piers, columns and stanchions all as specified and directed

M & L as in repair providing precast cement concrete louvers and jallies 35mm thick solid including all moulding incl frame of pcc (1:2:4) type B0 (12.5mm graded aggregate) crushed stone & set in CM 1:4 coplete all as spfd & directed.

M & L brick work with flyash bricks, straight or curved on plan exc 6 m mean radius built in cement mortar (1:6) complete all as specified and directed by EIC

M&L rendering 15mm thick on brick wall or concrete surface in cement mortar (1:4) finished even and smooth with using extra cement complete all as specified and directed by Engineer-In- Charge.

M & L for mild steel TMT bars 6 to 8 mm dia and over as in stirrups to lengh bent to shape required including cranking bending spirally for hooping for columns hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia as in stirrups.

M & L mild steel bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips TMT bars complete all as specified and directed.

S&F for framed work such gates, guard bards including pintle hinge , stops, hand made sliding bolt etc with ends of bar should and /or reveted or forged into spikes, confirming to Fe 290 grade E-165 as specified and directed

M&L for prepration of newly plastered surfaces of walls and applying two coats of cement base paint over a coat of white cement primer complete all as specifed.

M & L one coat of exterior weather coat paint white or tinted on walls as per manufacture instruction or fascia of roof or chajjas on old decorated prepared plastered/painted surfaces of bldg all as specified & directed. Make AsianPaints (Apex)/Begerpaint(Brand-Walmasta)/Nerolac paint (Suraksha plus).

M&L for prepration of surfaces of any description, over 10cm in width or girth, not otherwise described and applying two coat of synthetic enamel paint over a coat of red-oxide primer on new steel surfaces all as specifed.

M/s Subham Traders (BID ID -3096830)

M/S MAGADH CONSULTANT (BID ID -3096594)