Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹1.6 LAccepted-AOC | ₹1.6 L | L1 | Accepted-AOC L1 |
| 2 | L1₹6.5 LAccepted-AOC 156 INDIRA COMMERCIAL COMPLEX TRANSPORT NAGAR KORBA CHHATTISGARH 495677 | KORBA | CHHATTISGARH | 495677 | ₹6.5 L | L1 | Accepted-AOC L1 |
| 3 | L1₹9.9 LAccepted-AOC SADANANDA INDUSTRIAL ESTATE BALTIKURI BAKULTALLA HOWRAH WEST BENGAL 711111 | HOWRAH | HOWRAH | WEST BENGAL | 711111 | ₹9.9 L | L1 | Accepted-AOC L1 |
| 4 | L1₹39.7 LAccepted-AOC 0 NANDY ENGINEERING CONCERN HOWRAH AMTA ROAD KANTALIA NIBRA HOWRAH WEST BENGAL 711409 | HOWRAH | WEST BENGAL | 711409 | ₹39.7 L | L1 | Accepted-AOC L1 |
| 5 | Rejected-Technical | - | - | Rejected-Technical On ground of PQR clause 5b, PQR clause 5d and Annex- IX |
| Sl No | Description | Qty | Unit | NANDY ENGINEERING CONCERN L2 | PERFECT ENGINEERING COMPONENTS PRIVATE LIMITED L4 | BLACK DIAMOND EQUIPMENTS PVT. LTD. L1 | CONVEYOR SYSTEM & ENGINEERING WORKS L3 |
|---|---|---|---|---|---|---|---|
| 1.00For Wagon Tippler | |||||||
| 1.10 | Conveyor pulley 500 mm dia, SGP3N, Non-Drive (SNUB) with Plummer block SNA3034 for 1400mm width conveyor 19A/B of Wagon Tippler.
Specification –
Non drive pulley : Drum dia = 500mm, Drum Length = 1600mm, Shell thickness = 16mm, Shaft Length = 2130mm, Shaft dia for bearing = 150mm, End disk = 25mm thick, Centre disk = 16mm thick with 12mm lagging.
Plummer Block both ends without bearings:
SNA3034 with locating rings 2 x FRB 10/260
(for bearing 23034 CCK/C3/W3 + Sleeve H3034) | 2 | Nos | 4,37,730 ₹5,16,521.4 Lowest | 4,57,098.6 ₹5,39,376.35 | 6,89,038 ₹8,13,064.84 | 4,46,580 ₹5,26,964.4 |
| 2.00For CHP-I | |||||||
| 2.10 | Conveyor Pulley 315 mm dia, Non Drive Pulley
Specification –
Shaft dia at bearing end x Length = Ø 75 x 180 mm,
Drum length = 1600 mm, Shell Thickness = 10mm
Total Shaft Length = 2060 mm | 3 | Nos | 1,55,565 ₹1,83,566.7 | 1,88,275.5 ₹2,22,165.09 | 2,33,415 ₹2,75,429.7 | 1,50,570 ₹1,77,672.6 Lowest |
| 2.20 | Conveyor pulley 400 mm dia, Non Drive Pulley
Specification –
Shaft dia at bearing end x Length = Ø 100 x 180 mm,
Drum length = 1600 mm, Shell Thickness = 12mm
Total Shaft Length = 2060 mm | 5 | Nos | 3,44,875 ₹4,06,952.5 Lowest | 4,85,005.5 ₹5,72,306.49 | 4,82,160 ₹5,68,948.8 | 3,66,200 ₹4,32,116 |
| 2.30 | Conveyor pulley 400 mm dia, Non Drive Pulley
Specification –
Shaft dia at bearing end x Length = Ø 125 x 180 mm,
Drum length = 1600 mm, Shell Thickness = 12mm,
Total Shaft Length = 2060 mm | 3 | Nos | 2,54,985 ₹3,00,882.3 | 3,18,124.8 ₹3,75,387.26 | 3,58,983 ₹4,23,599.94 | 2,36,700 ₹2,79,306 Lowest |
| 2.40 | Conveyor pulley 800 mm dia, Non Drive Pulley
Specification –
Shaft dia at bearing end x Length = Ø 115 x 230 mm,
Drum length = 1600 mm, Shell Thickness = 16 mm,
Total Shaft Length = 2240 mm | 2 | Nos | 2,64,450 ₹3,12,051 Lowest | 3,19,233.6 ₹3,76,695.65 | 2,67,290 ₹3,15,402.2 | 2,71,020 ₹3,19,803.6 |
| 2.50 | Conveyor pulley 400 mm dia, Non Drive Pulley
Specification –
Shaft dia at bearing end x Length = Ø 90 x 195 mm,
Drum length = 1600 mm, Shell Thickness = 12 mm,
Total Shaft Length = 2210 mm | 4 | Nos | 3,03,980 ₹3,58,696.4 | 3,67,722.6 ₹4,33,912.67 | 3,11,796 ₹3,67,919.28 | 2,81,320 ₹3,31,957.6 Lowest |
| 2.60 | Conveyor pulley 400 mm dia, Non Drive Pulley
Specification –
Shaft dia at bearing end x Length = Ø 75 x 195 mm,
Drum length = 1600 mm, Shell Thickness = 10 mm,
Total Shaft Length = 2210 mm | 3 | Nos | 2,05,665 ₹2,42,684.7 | 2,01,574.8 ₹2,37,858.26 | 2,33,847 ₹2,75,939.46 | 1,74,390 ₹2,05,780.2 Lowest |
| 2.70 | Conveyor pulley 630 mm dia, Drive Pulley
Specification –
Shaft dia at bearing end x Length = Ø 195 x 175 mm,
Drum length = 1600 mm, Shell Thickness = 16 mm, (S.S. Plate)
Total Shaft Length = 2615 mm | 2 | Nos | 8,79,990 ₹10,38,388.2 Lowest | 16,20,042.9 ₹19,11,650.62 | - | 8,99,980 ₹10,61,976.4 |
Tender Value
₹72.3 L
EMD Value
₹1.4 L
Closing Date
5 Jun 2023, 3:00 pmClosed
SE PnW o/o ED Gen Brs
SE PnW o/o ED Gen Brs
Procurement of various type pulley for 1400 mm wide conveyor installed at 4x210 Mw CHP I 1x500 Mw CHP II and wagon Tippler at SGTPS MPPGCL Birsinghpur
2023_MPPGC_257082_1
257082
Open Tender
Miscellaneous Goods
Item Wise
90 days
SE PnW o/o ED Gen Brs
As per NIT
19 documents required · 19 mandatory
₹2,000
Yes
₹1.4 L
Yes
15 Apr 2026
4 May 2023
8 Jun 2023
4 May 2023
5 Jun 2023
4 May 2023
For Wagon Tippler
Conveyor pulley 500 mm dia, SGP3N, Non-Drive (SNUB) with Plummer block SNA3034 for 1400mm width conveyor 19A/B of Wagon Tippler. Specification – Non drive pulley : Drum dia = 500mm, Drum Length = 1600mm, Shell thickness = 16mm, Shaft Length = 2130mm, Shaft dia for bearing = 150mm, End disk = 25mm thick, Centre disk = 16mm thick with 12mm lagging. Plummer Block both ends without bearings: SNA3034 with locating rings 2 x FRB 10/260 (for bearing 23034 CCK/C3/W3 + Sleeve H3034)
For CHP-I
Conveyor Pulley 315 mm dia, Non Drive Pulley Specification – Shaft dia at bearing end x Length = Ø 75 x 180 mm, Drum length = 1600 mm, Shell Thickness = 10mm Total Shaft Length = 2060 mm
Conveyor pulley 400 mm dia, Non Drive Pulley Specification – Shaft dia at bearing end x Length = Ø 100 x 180 mm, Drum length = 1600 mm, Shell Thickness = 12mm Total Shaft Length = 2060 mm
Conveyor pulley 400 mm dia, Non Drive Pulley Specification – Shaft dia at bearing end x Length = Ø 125 x 180 mm, Drum length = 1600 mm, Shell Thickness = 12mm, Total Shaft Length = 2060 mm
Conveyor pulley 800 mm dia, Non Drive Pulley Specification – Shaft dia at bearing end x Length = Ø 115 x 230 mm, Drum length = 1600 mm, Shell Thickness = 16 mm, Total Shaft Length = 2240 mm
Conveyor pulley 400 mm dia, Non Drive Pulley Specification – Shaft dia at bearing end x Length = Ø 90 x 195 mm, Drum length = 1600 mm, Shell Thickness = 12 mm, Total Shaft Length = 2210 mm
Conveyor pulley 400 mm dia, Non Drive Pulley Specification – Shaft dia at bearing end x Length = Ø 75 x 195 mm, Drum length = 1600 mm, Shell Thickness = 10 mm, Total Shaft Length = 2210 mm
Conveyor pulley 630 mm dia, Drive Pulley Specification – Shaft dia at bearing end x Length = Ø 195 x 175 mm, Drum length = 1600 mm, Shell Thickness = 16 mm, (S.S. Plate) Total Shaft Length = 2615 mm
Conveyor pulley 630 mm dia, Drive Pulley Specification – Shaft dia at bearing end x Length = Ø 195 x 175 mm, Drum length = 1600 mm, Shell Thickness = 16 mm, (M.S. Plate) Total Shaft Length = 2615 mm
Conveyor pulley 500 mm dia, Drive Pulley Specification – Shaft dia at bearing end x Length = Ø 138 x 200 mm, Drum length = 1600 mm, Shell Thickness = 12 mm, (M.S. Plate) Total Shaft Length = 2610 mm
For CHP-II
Conveyor Pulley 630 mm dia, Non Drive Pulley Specification – Shaft dia at bearing end = Ø 180 mm, Drum length = 1400 mm, Shell Thickness = 16 mm, Total Shaft Length = 1890 mm
Conveyor pulley 500 mm dia, Non Drive Pulley Specification – Shaft dia at bearing end = Ø 125 mm, Drum length = 1400 mm, Shell Thickness = 12 mm, Total Shaft Length = 1890 mm
Conveyor pulley 500 mm dia, Non Drive Pulley Specification – Shaft dia at bearing end = Ø 115 mm, Drum length = 1400 mm, Shell Thickness = 12 mm, Total Shaft Length = 1890 mm
Conveyor pulley 400 mm dia, Non Drive Pulley Specification – Shaft dia at bearing end = Ø 140 mm, Drum length = 1400 mm, Shell Thickness = 12 mm, Total Shaft Length = 1890 mm
Conveyor pulley 400 mm dia, Non Drive Pulley Specification – Shaft dia at bearing end = Ø 100 mm, Drum length = 1400 mm, Shell Thickness = 10 mm, Total Shaft Length = 1890 mm
Conveyor pulley 400 mm dia, Non Drive Pulley Specification – Shaft dia at bearing end = Ø 90 mm, Drum length = 1400 mm, Shell Thickness = 10 mm, Total Shaft Length = 1890 mm
Conveyor pulley 400 mm dia, Non Drive Pulley Specification – Shaft dia at bearing end = Ø 75 mm, Drum length = 950 mm, Shell Thickness = 8 mm, Total Shaft Length = 1200 mm
Conveyor pulley 500 mm dia, Non Drive Pulley Specification – Shaft dia at bearing end = Ø 90 mm, Drum length = 950 mm, Shell Thickness = 8 mm, Total Shaft Length = 1200 mm
Conveyor pulley 530 mm dia, Drive Pulley Specification – Shaft dia at bearing end = Ø 100 mm, Drum length = 950 mm, Shell Thickness = 12 mm, Total Shaft Length = 1850 mm
NANDY ENGINEERING CONCERN
CONVEYOR SYSTEM & ENGINEERING WORKS
PERFECT ENGINEERING COMPONENTS PRIVATE LIMITED
PERFECT ENGINEERING COMPONENTS PRIVATE LIMITED
CONVEYOR SYSTEM & ENGINEERING WORKS
BLACK DIAMOND EQUIPMENTS PVT. LTD.
stage.html
html • 0.05 MB
techsummary_320947.pdf
BOQ Comparative Chart
xlsx
finsummary_320947.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.05 MB
Tendernotice_1.pdf
PDF • 0.13 MB
NIT257082.pdf
Tender Documents • 0.12 MB
Tenderschedule257082.pdf
Tender Documents • 0.06 MB
NSBD.pdf
Tender Documents • 3.58 MB
BOQ_320947.xls
BOQ • 0.30 MB
DetailsOfBidder.pdf
Additional Documents • 0.05 MB
SBDaddendumcombined.pdf
Additional Documents • 0.17 MB
Indicativedrawing.pdf
Additional Documents • 13.59 MB
checklistofformate.pdf
Additional Documents • 0.04 MB
NTechnicalbid257082.xls
Additional Documents • 0.38 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .