PERIODICAL SERVICES TO BLDGS OF MD ACCN OF N4, NARENDRA GROUND AND RAMA DEVI AND REPAIRS TO CHAJJA, PARAPET AND OTHER CONNECTED ITEMS AT AFS CHAKERI KANPUR

Taking up or down steel tubing and connections including cleaning for refixing of 15 mm bore or removing from site, complete all as specified and directed

Supplying and laying of 16mm outer dia of CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors etc including all necessary fittings etc complete all as specified. Note:- The cost of Brass threaded Elbow/Tea/Reducer ets shall be included in unit quoted rate no extra shall be paid for fittings/fixtures

All as per item No 1 above but 20mm bore of pipes complete all as specified and directed.

Supplying and laying of 20mm outer dia of CPVC pipes SDR-11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors etc including all necessary fittings etc complete all as specified. Note:- The cost of Brass threaded Elbow/Tea/Reducer ets shall be included in unit quoted rate no extra shall be paid for fittings/fixtures.

Cutting chases pinning in brick wall built in cement mortar for concealed water tubing and making good with CM (1:3), cutting depth not exc 10 cm girth complete all as specified and directed.

M & L for preparation of old decorated surfaces of walls, pillars & cornices including brooming down and cleaning the surfaces & applying one coat white wash up to 4th storey bldg complete all as specified and directed.

Ditto all as per item No 6 here-in-before but on ceiling surfaces.

Taking down chowkats or frames not exceeding 1.5 sqm each but with shutters (without taking off shutters from the frame) complete all as specified and directed.

ditto as per item No 8 here-in- before but exceeding 1.5 sqm each but not exceeding 4.00 Sqm with shutters (without taking off shutters from the frame) complete all as specified and directed.

S&F Solid PVC door frame of size 50mmx 47 mm made out of 5 mm plain colour PVC sheet reinforced with MS square tube complete all as specified and directed.

S&F Factory made solid panel PVC door shutter 30 mm thick( stile), consisting of frame made out of MS tubes for top and bottom rail. MS frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20 mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail and bottom rail on either side and as gap insert for top rail and bottom rail; panelling of plain colour PVC sheet to be fitted in the MS frame welded/ sealed to the stiles and rails with suitable PVC sheet beading, and joined together with solvent cement, supplying & fixing in the frame at site as per specification & drawing, all as specified and as directed.

S & F PVC butt hinges medium weight for PVC doors complete all as specified and as directed.

S & F 200 mm long aluminum anodised barrel tower bolts of extruded section complete all as specified and as directed.

S & F 150 mm long Aluminum anodised bow handle fabricated type extruded section complete all as specified and directed.

M & L for complete removal of existing treatment of old internal/external wall/ceiling/chajja surfaces by means of scraping machine including filling the cracks, remove the nails, vegetations etc complete all as specified and directed.

M & L for applying two or more coats of exterior weather proof anti algae 100% acrylic smooth emulsion with silicon additives tthat offers anti algae high peroformance exterior wall finish with five years of peroformance warranty by manufacturere applied by using air less techonology with max working pressure of 3300 PSI and capable of operationg single spray gun with a maximum material hose length 30 Mtr the spary should be of reputed make as specified bythe manufacturers and as mentioned in PS and accessories for applying the exterior emulsion should be able to spary in hard to reach areas and achive the good wounding and penetration of paints on the surface to achive exelent application using limited manpower including 2.00mm thick wall care putty over a coat of primer complete all as specified and directed (upto 12 th storey).

M & L for applying one coat of exterior weather proof anti algae 100% acrylic smooth emulsion with silicon additives tthat offers anti algae high peroformance exterior wall finish with five years of peroformance warranty by manufacturere applied by using air less techonology with max working pressure of 3300 PSI and capable of operationg single spray gun with a maximum material hose length 30 Mtr the spary should be of reputed make as specified bythe manufacturers and as mentioned in PS and accessories for applying the exterior emulsion should be able to spary in hard to reach areas and achive the good wounding and penetration of paints on the surface to achive exelent application using limited manpower complete all as specified and directed (upto 12 th storey).

M&L for 2.00 mm thick (Avg thickness ) water proof cement based wall care putty on wall and ceiling and putty applied with blade or steel patti to maintain homogeneous if application of putty complete all as specified and directed by Engr -in-Charge.

M&L for preparing old plastered or unplastered surface of wall and applying two coat of acrylic distemper oil emulsion over coat of primer for smooth finishes of surfaces complete all as specified and directed.

M&L for preparing old plastered or unplastered surface of wall and applying one coat of acrylic distemper oil emulsion,complete all as specified and directed.

M & L for preparing old decorated plastered or un-plastered surfaces of wall, pillasters, cornices etc by brooming down or steel wire brushing, scrapping down smoke, roots,moulds ,moss and efforehance, salt and trading oil and greasy spot and applying two coats cement base paint complete all as specified and directed. (upto 4tth storey)

M & L for preparation of old painted wooden /wood based surface of any description exceeding 10 cm width or girth by washing down with solution of alkaline soap to remove all loose dirt and oily & grease spots and applying one coat of synthetic enamel paint complete all as specified and directed .

Ditto all as per item No.22 here-in-before but on steel surfaces

Taking down cement plaster on brick or concrete surfaces, parapets including raking out joint, hacking for key, scrubbing down with water etc complete all as specified and directed.

M & L for rendering 15 mm thick in CM ( 1:6 ) on wall/ concrete surfaces finish even and smooth without using extra cement including two coats of cement based paint complete all as specified and directed.

M & L for rendering 10 mm thick in CM ( 1:6 ) on wall/ concrete surfaces finish even and smooth without using extra cement including two coats of distemper oil emulsion over a coat of primer complete all as specified and directed.

M & L for 10 mm thick plaster in CM (1:3) on ceiling surfaces finished even and smooth without using extra cement and applying three coats of white wash after preparation of surfaces complete all as specified and directed .

M & L re-writing letters or figures (Block roman italic or Indian ) by using synthetic enamel paint not exceeding 30 cm height complete all as specified and directed.

M & L for repairing of damaged portion of mouth at tarrace / roof surface of rain water pipe by cleaning and repairing to mouth of RWP by using CM (1:3) with mix with liquid WPC @ 3% weight of cement & sealed with 85/25 hot blown grade bitumen complete to make joint of rain water pipe and roof suface fully leak proof complete all as specified and directed

M & L for repair to chajja area not exceeding 1 sqm each including plaster in CM(1:3) or PCC type B0 (1:2:4) (using 12.5 mm stone aggregate) on top with WPC @ 3% weight of cement, benching/haunching, repair to broken plaster with dubbing coat complete all as specified and directed.

M & L for repair to chajja area exceeding 2 Sqm and not exceeding 4 sqm each including dismentling of upward facia,cutting of reinforcement , plaster in CM(1:3) or PCC (1:2:4) type B 0 (using 12.5 mm stone aggregate) on top with WPC @ 3% weight of cement , benching/haunching,repair to broken plaster with dubbing coat upto 11th floor of bdlgs. The cost of scoffolding inclusive in the unit quoted rate by the bidders.

M& L for repair to chajja area exceeding 1 Sqm and not exceeding 2 sqm each including dismentling of upward facia,cutting of reinforcement , plaster in CM (1:3) or PCC(1:2:4) type B0 using 12.5 mm stone aggregate on top with WPC @ 3% weight of cement , benching/ haunching,repair to broken plaster with dubbing coat upto 11th floor of bdlgs. The cost of scoffolding inclusive in the unit quoted rate by the bidders.

Material & Labour for providing and fixing stainless steel (Grade 304) railing/grills/gates made of hollow tubes,channels, plates etc., including welding, grinding,buffing, polishing and making curvature (where ever required) and fitting the same with necessary stainless steel nuts and bolts complete, including fixing the railing with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc., of required size, on the top of floor or the side of waist slab with suitable arrangement including making hole or cutting through stone/ brick masonry and making good/packing with cement mortar in CM 1:3 complete specified and directed including taking down old Timber frame wok/grill/scantling or any other similar timber work complete all as specified and directed.

Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/ Chowkhat of size 45 x 85 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum comp ressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant Note: For WPC solid door/window frames, minus 5mm tolerance in dimension i.e. depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made.

Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/ Chowkhat of size 50 x 125 mm for double shutter door comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum comp ressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant Note: For WPC solid door/window frames, minus 5mm tolerance in dimension i.e. depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made.

Factory made single extruded WPC (Wood Polymer Composite) solid plain flush door shutter of 30mm size comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer-In-Charge. (Note: stainless steel butt hinges and necessary S S screws shall be paid separately)

S&F 30mm thick Wire Mesh solid WPC Door shutter consisting of density 650Kg/Cum as per manufacturers an ISO-9001-2015 certified company door to be panneled with Statin less steel mosquito wire mesh and XTN alumenium wire mesh for additional strength and safty purpose (conforming to IS-4020. The doors should be water proof, termite proof, fire retardent and heavy screw holding capacity, door to be fixed to frame with 03 Nos of MS powder coated but hinges of size 100mmx25mmx2mm and 32mm long steel screws drilled suitable to pass through both the walls of the MS Tube and others hardware should be fixed with 19X6mm steel screws etc complete all as per direction of Engr-in-Charge. Manufacturers specification and drawings complete all as specified and directed.The cost of wire mesh is inclusive of unit quoted rate.

S & F Decorative type chrome/SS Finised Tower bolts 200 mm long heavy duty with screws complete all as specified and directed

S & F mortise Handle both side with Locking system (SS Finished) suitable for WPC Doors with Locking body Striker Plate , cyliner, 3 Keys and necessary screws for fixing complete all as specified and directed.