REPAIR/ MAINT OF EXTERNAL WATER SUPPLY AT DIHAR LEH

Amount

Excavation in trenches n. exc 1.5 Mtr wide and n. exc. 1.5 mtr depth for laying pipes in hard/dense soil and getting out complete all as specified and directed.

Returning, filling in soil including spreading, leveling, watering and well ramming in layers n. exc. 1.5 mtr complete all directed.

Removal of surplus soil to a distance n. exc. 50 mtr and depositing where as directed at level not exc. 1.5 mtr above the starting point complete all as specified and directed.

Material and labour for PCC 1:2:4, type B-1 ,using 20mm graded aggregate in cement mortar as in foundtion as mass concrete.

Taking up or down GI tubing & connection including cleaning for re fixing or removal to store of 15mm dia of pipe complete all as specified and as directed.

All as per serial item No 5.00 above but 20 mm dia.

All as per serial item No 5.00 above but 25 mm dia.

All as per serial Item No 5.00 above but 40 mm dia.

All as per serial item No 5.00 above but 50 mm dia.

All as per serial item No 5.00 above but 80 mm dia.

All as per serial item No 5.00 above but 100 mm dia.

Supply and fixing for GI tubing 15 mm bore medium grade with all fitting ISI marked laid in trenches, wall/floor including required cutting etc complete all as specified and as directed. Note :- Earth work and taking out of pipe shall be measured & paid seperately.

All as per serial item No 6.00 above but 20 mm dia.

All as per serial item No 6.00 above but 25 mm dia.

All as per serial item No 6.00 above but 40 mm dia.

All as per serial item No 6.00 above but 50 mm dia.

All as per serial item No 6.00 above but 80 mm dia.

All as per serial item No 6.00 above but 100 mm dia.

Supply & fixing Gate valve with iron wheel head screwed both ends for iron pipe ISI marked of size 50 mm dia including taking out gun metal glove valve complete all as specified and directed.

All as per serial item No 7.00 above but 40mm dia.

All as per serial item No 7.00 above but 25mm dia.

All as per serial item No 7.00 above but 20mm dia.

All as per serial item No 7.00 above but 15mm dia.

Supply and fixing for sluice Valve flanged and drilled with stain less stell spindle, iron wheel ISI marked with nuts, bolts & washers and gasket heavy duty PN 1.6 of 80 mm sizes including taking out old sluice valve complete all as specified and directed.

All as per serial item No 8.00 above but 100 mm dia.

Supply and fixing in replacement Foot Valve of dia 65 mm, PVC complete all as specified and directed.

Supply and fixing in replacement Foot Valve of dia 50 mm, PVC complete all as specified and directed.

Reapair /Overhauling of centrifugal mono block pump set Capacity 5 HP including removing the pump from site and dismantling the complete inluding replacement of ball bearing,bushes, oil seal, gland packing, cleaning,oiling / greasing properly, replacement of 02 Nos CI impeller of suitable size for the pump set all as specified complete in all respect and reassembling commissioning & testing as directed by Eng-in-charge.

All as per serial item No 11.00 above but 10 HP pump.

All as per serial item No 11.00 above but 20 HP pump.

Material and labour for dismantling the motor 20 HP carring out rewinding with super enamelled copper winding wire of existing adequate size and gauge incl all insulating materials such as insulating paper insulating sleeves , insulating varnish and drying the copper winding after varnishing with blower or heater incl soldering all internal connection including reassembling the same and testing complete all as specified and directed.

All as per serial item No 12.00 above but 10 HP.

All as per serial item No 12.00 above but 5 HP.

Material and labour for opening of submersible motor of 5HP/7.5HP capacity and taking out the rotor form the body and cutting the burnt coils/winding, cleaning the stator slots properly by using cleaning material and re-winding/reassembling the same including replacement of gun metal bushes, sockets etc. complete all as specified and directed.

Material and labour for dismantling of all necessary electric connection from the panel for taking out existing burnt/damaged 5HP/7.5HP capacity submersible pump and motor from bore well of any depth by means of mechanical hoist/chain pully block, opening the nuts bolts from the column pipes stacking the pipe in pump house for repair to pump and lowering another submersible pump, column pipes in bore well and connected with suitable size nuts, bolts, washers & rubber gasket etc complete all as specified and directed. (Note:- Repair to burnt pump shall be measured under respective item of schedule separately).

Supply and fixing in replacement of 3 Phase contactor with 1NO+1NC, 415 Volt 10 Amp, Auxiliary supply 230V spare / Acessories suitable for DOL starter of three phase 5HP/7.5HP motor.

All as per serial item No 15.00 above but over load relay suitable for 5HP/7.5HP, Capacity 6A -10A.

All as per serial item No 15.00 above but single phase preventer.

All as per serial item No 15.00 above but push button for Start & Stop.

All as per serial item No 15.00 above but indicator for Stop & Run.

All as per serial item No 15.00 above but connector Bakelite 12 Way.

Supply and fixing in replacement of 3 Phase contactor with 2NO+2NC, 415 Volt 32 Amp, Auxiliary supply 230V spare/acessories suitable for Star - Delta starter of three phase Mono block motor of Capacity 20 HP/10 HP.

All as per serial item No 16.00 above but 3 Phase contactor with 2NO+2NC, 415 Volt 32 Amp, Auxiliary supply 415V.

All as per serial item No 16.00 above but over load relay suitable for 10 HP, Capacity 14A -23A.

All as per serial item No 16.00 above but over load relay suitable for 20 HP, Capacity 20A -33A.

All as per serial item No 16.00 above but star -Delta Timer.

All as per serial item No 16.00 above but single phase preventer.

All as per serial item No 16.00 above but push button for Start & Stop.

All as per serial item No 16.00 above but indicator for Stop & Run

All as per serial item No 16.00 above but Connector Bakelite 12 Way.

Material and labour for replacement of flat submersible,3 core, stranded copper conductor, PVC sheathed cable, 1100 volts grade, as per IS-694 of size 2.5 Sqmm, complete all as specified and directed.

Material and labour for painting of motor & pump for removing the existing deteriorated paint by scrapping the complete body, filling cavities with filter spray painting with synthetic, nameled paint two coats over a coat of red oxide zinc crome and marking of SM/MES No. with black paint for Mono block pump set of 20 HP.

All as per serial item No 18.00 above but Mono block pump set of 10 HP.

All as per serial item No 18.00 above but Mono block pump set of 5 HP.

Material and labour for painting of GI suction pipes,delivery pipes after removing the existing deteriorated paint by scrapping and painting with synthetic enameled paint two coats over a coat of red oxide zinc crome of ARU pump House,Old ARU pump house and JCO's Mess Pump House complete all as specified and directed by Engr-in-Charge.

Material and labour for painting of Over head tank (12 /15 mtr staging 32000 Ltr cap) removing the old existing deteriorated paint by scrapping ,making the surface and painting with two coat of synthetic enameled Black paint over a coat of red oxide zinc chrome included insurance and other safety equipment for workmen complete all as specified and directed. Note :- Making tank leak proof using water proofing method viz plate welding, M-seal. Dr. fixit, Pidifin 2K or any other method. (ii) Entire work should be completed stipulated time within maximum 02 days. (iii) Rate quoted by contractor includes all the above requirement and no extra payment will be given by the department.

Desludging / desilting of over head reservoir of capacity 32000 Ltrs capacity including removing the sludge and depositing to a distance exc 50 mtr above the starting point, removing all scale, dirt, alges and other growths from the floor, roof and from mouth of circulating pipes by rubbing with the wire brushes and high pressure cleaning method with rotary sets, sucking out the dirty water by vaccum cleaners, and disinfecting the reservior with approved chemical solution using at the rate of 0.20 Kg/Sqm for making surface bacteria free and finally cleaning with fresh water to the satisfaction of Engr-in-charge including painting for MS plates, manhole covers, suction pipe, rugs etc with anti-corresive paint insurance and other safety procurement and writing outside the tank as 'Tank Cleaned on ____' and Capacity ________ on black painted surface complete all as specified. Note :- Making tank leak proof using water proofing method viz plate welding, M-seal. Dr. fixit, Pidifin 2K or any other method. (ii) Entire work should be completed within stipulated 02 days. (iii) Rate quoted by contractor includes all the above requirement and no extra payment will be given by the department.

Desludging / desilting of underground sedimentation reservoir of 100000 Ltrs capacity including removing the sludge and depositing to a distance exc 50 mtr above the starting point, cleaning walls by wire brush and disinfecting the reservior with approved chemical solution using at the rate of 0.20 Kg/Sqm for making surface bacteria free and finally cleaning with fresh water to the satisfaction of Engr-in-charge including painting for MS plates, manhole covers, suction pipe, rugs etc with anti-corresive paint and writing outside the tank as 'Tank Cleaned on ____' and Capacity ________ on black painted surface complete all specified. Note :- (i) Entire work should be completed with stipulated 01 days. (ii) Rate quoted by contractor includes all the above requirement and no extra payment will be given by the department.

Material and labour for earthing with GI plate 600mmx600mmx6mm thick, burried directly in ground ( earth pit not less than 2.25 meter deep below ground level) with top edge of plate not less than 1.5 Mtr below normal ground level, connecting to GI plate with 32x6 mm GI earth strip upto 7.5 Mtr long from erth point to test point by means of bolts, nuts, check nuts, washers and provision of charcoal, salt etc including watering arrangement with 20 mm dia GI medium grade pipe, MS funnel, PCC chamber in cement concrete 1:3:6 type C1 and finished even and smooth without using extra cement, 50 mm thick RCC cover 1:2:4 type B1 including 10 mm dia deformed bars @100 mm c/c on both ways for full size of chamber complete all as per electrical plate No 3 of SSR Part-I (2009) including necessary excavation and earth work in any type of soil complete as described in IS: 3043-1987 and all directed by Engr-in-Charge

Material and labour for welding (per 10 running cm) water pipe lines of size 15 mm to 100 mm dia complete all as specified and directed by Engr-in-Charge

Material and labour for 15 m thick rendering in CM 1:4 to stone wall surfaces finished even and smooth from base of the staging upto bottom of the steel tank including preparation of newly plastered surfaces and applying two coats of cement base paint complete all as specified and directed by Engr-in-Charge

Material and labour for making by pass arrangement by Lagging to pipes 100 mm bore upto 3 RM in length used in external water supply or plumbing all around with 50mm thick bonded mineral wool pre-formed "SNAP ON" pipe sections of density 144 Kg/Cum conforming to IS 9842 provided with chicken mesh wire netting 25 gauge 20 mm mesh with 0.01 mm aluminium foil including 3 nos 100 mm or 4 gm-gun metal gate valve s/e-screwed end-threaded end complete including taking down of old lagging if required all as specified and directed by Engr-in-Charge

M/S SK TRADERS

national engineering