SPL REPAIR TO BLDG NO T 64 AND T 152 AND PROVN OF HARD STANDING WITH CHEQUERED TILES UNDER GE GANGTOK

Amount

Dismantling old PGI/CGI sheeting any gauge, thickness, including Nainital. Sikkim or similar pattern roof/facia etc complete all as specified and directed.

S&F for except sheeting any thickness with two corrugations side lap, fixed with coach screws J type , jtype,or cranked hook bolts and washers, in roofs, walls etc. with grade of zinc coating 275 complete all as specified and as directed.

M&L for preparation of old painted surfaces of any description over 10cm in width or girth not otherwise described by and applying 2 coats of synthatic enamel paint (1st grade quality) over a coat of red oxide primer complete all as specified and as directed.

M&L for pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 MPa as in roof covering fixed with self tapping screws / L type or J hooks complete all as specified and directed.

M&L for pre-painted galvalume aluminium zinc coating GI based plain steel sheets 0.45mm thick of any colour having tensile strength of 550 MPa as in ridges, valley, eaves, etc and fixed with self tapping screws complete all as specified and as directed.

Dismantling wall and ceiling board (fibre pulp, insulation etc) or insulation boards any thickness including cover fillets complete all as specified and as directed.

S&F for 4 mm thick 3 ply plywood, grade BWR, type BB, fixed in ceiling, flat or slopingwith screws to timber frame work complete all as specified and as directed.

All as per item No 07.00 here-in-above except plywood any thickness in celing complete all as specified and as directed.

All as per item No 07.00 here-in-above except plywood any thickness in wall complete all as specified and as directed.

Material & labour for preparation of old painted surfaces of wood & wood based materials over 10 cm width or girth and applying one coat of synthetic enamel paint (1st grade quality) complete all as specified and as directed by the Engr-in-Charge.

S&F Gl frame work for ceiling comprising of Gl perimeter channnel 0.55 mm thick with two unequal flanges of 20 and 30 mm and web of 27 mm ixed to surrounding wall using nylon sleeves and screws at 450 mm centre to centre/intermediate channel 0.9 mm thick having two equal flanges of 15 mm each and web of 45 mm suspended from soffit at approx 900 mm centre to centre with Gl cleat and steel expansion fasteners with and including ceiling section (not exc 1.2 m length) of 0.55 mm thickness having kurled web of 50 mm and flange of 26 mm each with lips of 10.5 mm fixed to the intermediate channel with connecting clips across the intermediate channel at 457 mm centre to centre.Hangers 6 mm dia. G.I. (upto 1200mm length) adjusting level fixed to roof slabs by means of ceilling cleats made out of G.I. flat 40 x 3 mm size 60mm long and expansion hold fasteners 12.5mm dia. 40mm long complete all as specified and as directed.

Supply and fix 4mm thick Non asbestos fibre cement building boards (E-board) of approved texture, for insulation and acoustic purpose of size 595 x 595 mm size fixed with staples on snap grid as in ceiling with and including dusting of surfaces and applying two coats of oil emulsion diatemper over a coat of primer including preparation of surfaces complete all as specified and as directed by the Engr-in Charge.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and as directed.

M&L Screed bed or bedding layer of cement mortar (1:6) 20 mm thick for laying floor finishes etc complete all as specified and as directed.

M&L for coloured Non skid ceramic tiles 7 to 8 mm thick area of each tiles exc. 018 Sqm but not exc. 0.38 Sqm in floors etc. set and jointed in neat cement slurry and pointed in white or colour cement to match over 15mm thick screed bed in 1:6 CM etc. complete all as specified and as directed.

M&L for non - skid coloured Ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over screed bed complete all as specified and as directed.

M&L for Machine cut kota stone slab flooring 20-25mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and as directed.

M&L for vitrified dark shade Ceramic tiles 10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and as directed.

M&L for coloured glazed ceramic tiles in vertical surfaces 350 x 250 x 7 mm / 450 x 350 x 7 mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match over 10mm thick rendering in 1:4 CM etc complete all as specified and as directed.

M&L for 75mm PCC (1:4:8) type D-2 (using 40mm graded crushed stone aggregare) as in sub base of floor complete all as specified and as directed.

M&L for 40 mm thick PCC (1:2:4) type B-1 (using 20 mm graded stone aggregate) finished and even as in floor complete all as specified and as directed.

Excavation in trenches n.exc 1.5 m in depth and 1.5 m in width for foundation etc and getting out in soft / loose soil complete all as specified and as directed.

Removing excavated material n. exc. 50m and positing where directed at a level n. exc. 1.5 m above the starting poin complete all as specified and as directed.

Returning filling in, including, spreading, levelling, watering and well ramming in layers n. exc. 25cm in soft / loose soil complete all as specified and as directed.

Demolition of brickwork or stone/boulder masonary built in cement mortar including all quoins, arches, pillars, precast PCC bond stones including separating serviceable stones/boulders & setting aside for reuse in the work and removal of unserviceable materials from site complete all as specified and as directed.

M&L for Precast cement concrete hollow block masonry exc. 10 cm in width and setting in (1:4) cement mortar type (1:3:6) using (16mm graded aggregate) complete all as specified and as directed.

M&L for RR masonary uncoursed, well bonded beded and solidly hearted built in (1:6) CM complete all as specified and as directed.

Demolition of concrete in ground floors and pavings n exc 15 cm thickness (below or above ground level) complete all as specified and as directed.

Material and labour for PCC (1:4:8) type D-2 (using 40mm graded stone aggregate) as in foundations, filling and mass concrete complete all as specified and as directed.

M&L for rendering on fair faces of wall 20mm thick in cement mortar (1:4) in two layers of 10mm each using WPC in finishing layer on brick or concrete surfaces finished even & fair (WPC for finishing layer will be paid seperately as supply only) complete all as specified and as directed.

Supply only integral water proofing compound.

M&L for rendering 15mm thick on other than fair faces of brick or concrete surfaces in cement mortar (1:6) finished even & smooth using without extra cement complete all as specified and as directed.

M&L for rendering 15mm thick on on other than fair faces of brick or concrete surfaces in cement mortar (1:4) finished even & fair to recive tile complete all as specified and as directed.

M&L for clearocolle on new plastered and other surface of walls and applying two coats of oil bound distemper, complete all as specified and as directed.

M&L for clearocolle on new plastered and other surface of walls and applying two coats of cement base paint , complete all as specified and as directed.

M&L for design mix concrete grade M-25 for foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc.; basement slabs, under-reamed piles and mass concrete complete all as specified and as directed.

M&L for RCC (Nominal Mix) (1:2:4) type B1 for columns, pillars, piers, posts and struts complete all as specified and as directed.

M&L for RCC (Nominal Mix) (1:2:4) type B1 for slabs supported on walls,beams and columns in floors,roofs, landings, balconies,canopies, deck slabs and in shelves and the like complete all as specified and as directed.

Formwork for rough finished surface of flat concrete walls ,floor and roofs exc 5cm but n exc. 10cm wide and side of rcc etc complete all as specified and as directed.

M&L for fair rough finished formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter complete all as specified and as directed.

M&L for fair rough finished formwork to sides of pillars, posts, struts, piers, columns and stanchions complete all as specified and as directed.

M&L for hard core of gauge n.exc .63 mm deposited spead, levelled, watered well rammed toa uniform smooth surface n.exc 15 cm thick using broken stone or boulder complete all as specified and as directed.

M&L for PCC (1:3:6) type C-2 (using 40mm stone agg) as in plinth protection, path etc 75 mm thick finishing surfaces even and smooth without using extra cement including construction joints at every 3 m interval and each coner and provition of mastic filling complete all as specified and as directed.

S&F PVC connections 15mm size with PTMT nuts of length 450mm complete all as specified and as directed by the Engr-in-Charge.

S&F Angle stop valve of PTMT any colour high pressure screwed for iron pipe and fixed, (Minimum weight 15mm-90gms) complete all as specified and as directed.

S&F for 75mm PVC (SWR) floor trap, plain with grating including jointing with solvent cement complete all as specified and as directed.

S&F for 110mm dia PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors etc complete all as specified and as directed.

S&F for 75mm dia PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors etc complete all as specified and as directed.

S&F for 110mm dia PVC (SWR) bends any radius complete all as specified and as directed.

S&F for 75mm dia PVC (SWR) bends any radius complete all as specified and as directed.

S&F for 75mm dia PVC (SWR) junction single (Single T) any radius complete all as specified and as directed.

M&L for cutting into existing manholes for connecting new drains, making good to pipe and rendering, cutting out existing benching for and forming branch channel (1/2 round or 3/4 section) in cement concrete (1:2:4) type B-l smooth finished, and reforming benching as required for 110mm dia pipe complete all as specified and as directed.

S&F rotational moulded polythylene water storage tank, 500 litres capacity, anti bacterial, UV and heat resistant 3 layer, ISI marked, multi layer construction (cylindrical vertical with closed top), hoisted & fixed in position including supply and fixing of 20mm bore ball valves, high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball, screwed for iron pipe of having weight not less than 210 gms, with threaded cap/Lid including connection including dismantling of old unserviceable water tank complete all as specified and as directed.

S&F 16 mm outer dia 3- layer PP-R Polypropylene random copolymer) concealed pipes SDR 7.4 (PN16) UV stabilized and antimicrobial fusion welded having thermal stability for hot & coldwater supply all PP-R plain & brass threaded polypropylene random fittings laid in trenches complete all as specified and as directed.

S&F for 20 mm outer dia 3- layer PP-R Polypropylene random copolymer) concealed pipes SDR 7.4 (PN16) UV stabilized and antimicrobial fusion welded having thermal stability for hot & cold water supply all PP-R plain & brass threaded polypropylene random fittings laid in trenches complete all as specified and as directed.

SF for 15mm dia ball valves high pressure of PTMT with epoxy coated Aluminium rod & highdensity plastic ball screwed for iron pipe and fixed. (Minimum weight 15mm-142gms/ 2 0mm-210gms./ 25mm-455gms/ 40mm - 690 gms) complete all as specified and as directed.

S&F 20mm dia Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed etc complete all as specified and as directed.

S&F S&F sinks with drainage board made of stainless steel 1mm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm bowl size 410mm x 330mm x 160mm complete all as specified and as directed.

M&L for mild steel rolled sections conforming to Fe - 290 (Gde E-165) as in main and cross beams, hip and jack rafters; purlins where connected to common rafter and running rails and guides for sliding doors; fixed with angle cleats or other connecting plates complete all as specified and as directed.

M&L for Roof trusses (framed), trussed,purlins, crane gantries, rails and fastenings and heavy framing (Beam, tee, angle, channel or flat sections) including ,distance pieces, cleats etc complete all as specified and as directed.

M & L for applying two coats of synthetic enamel paint (1st grade quality) on new or previously untreated steel surfaces exc 10cm width or girth over a coat of red oxide zinc chrome primer including preparation of surfaces complete all as specified and as directed.

M&L for mild steel TMT bars,10mm dia and over cut to length, bent to shape required including cranking ,bending spirally, hooping for columns, hookings/ends and binding with and including MS wire not less than 0.9 mm dia or securing with clips complete all as specified and as directed.

M&L TMT Bars 5mm dia and over upto including 10mm dia cut to length bend to shape required including cranking bending spirally for column, hooking ends & binding with and including mild steel mild steel wire (annealed not less that 0.90 mm dia or securing with chip) complete all as specified and as directed.

M&L for providing cement concrete type B-0 (1:2:4)(using 12.5 mm size graded aggregate) in coping set incl weathering, slightly rounded or chamfered angles & thickness complete all as specified and as directed.

M&L for preparation of new or previously untreated wooden surfaces of any description over 10 cm width or grith and applying two coats of synthetic enamel paint (1st grade quality) over one coat of pink primer complete all as specified and as directed.

Taking down chowkats or frames exc 1.5 Sqm and n.exc 4 Sqm (without taking off shutter from the frames) and removal from site complete all as specified and as directed.

All as per item No 67 here-in before but n.exc 1.5 Sqm each complete all as specified and as directed.

Dismantling of timber in scantling 40 sqcm and over in section in any position in unframed work all as specified complete all as specified and as directed.

Dismantling wrought iron or mild steel work of any description not otherwise provided for grils.rails etc complete all as specified and as directed.

S&F in repairs of factory made steel ventilator with top hung shutter including friction/ box type hinges ,steel peg stay complete including taking out old/unserviceable steel ventilator and making good to match as per existing surfaces etc complete all as specified and as directed.

S&F Steel windows with side hung shutters including projecting type hinges with steel handle, and steel peg stay, complete with glazing bars, dovetailed or welded complete all as specified and as directed.

S/F for 3 mm thick Sheet glass,ordinary quality and glazingwith oil putty in square exc 0.5 sq. m in each panel complete all as specified and as directed.

S/F for 3 mm thick figured glass, pin head type and glazing with oil putty in square exc 0.5 sq. m in each panel complete all as specified and as directed.

S&F stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and as directed.

M&L for PCC (1:3:6) type C-2 (using 40mm graded stone aggt) concrete bed to drain pipes150mm dia including packing under, and haunching against the sides of pipes after they are laid and tested; in etc complete all as specified.

Supply & fix Second class hard wood, plain, solid, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints complete all as specified and as directed.

S&F factory made flush shutters 30 mm thick, solid core construction, with particle board core commercial type on both sides covered with decorative face veneer wtih lipping/frame to match complete all as specified and as directed.

Supply and fix 150 mm long aluminium anodised barrel tower bolt of extruded section complete all as specified and as directed by the Engr-in-Charge.

Supply and fix aluminium alloy anodised sliding door bolts 200 mm long with hasp staple (Bolt type) and fixing clips of sheet, cast or extruded section and fixing bolts and sliding bolts of extruded section complete all as specified and as directed.

Supply & fix Aluminium handles, 150 mm size, cast type, anodised complete all as specified and as directed.

S&F of 100mm size mild steel butt hinges medium weight complete all as specified and as directed.

S&F Solid PVC single side prelam wall Lining consisting of 5mm thick PVC sheet inclusive of solvent cement and fixing at site on PVC frame complete all as specified and as directed.

S/F Wash basins, Vitreous China (flat back or angle back type) of size 630x450mm inlcuding matching pedastal fixed with and including cp brackets with complete fitting complete all as specified and as directed.

Surface excavation n.exc 30cm deep and averaging 15 deep and getting out soft/loose soil complete all as specified and as directed.

M&L for 75mm thick PCC (1:3:6) type C-2 (using 40mm graded stone aggregate) as in sub-base of floor etc. complete all as specified and as directed.

M&L chequered cement concrete tiles 20cm x 20cm x 25mm thick, set, jointed and pointed in neat cement slurry in floors including 20mm thick screed bed in CM (1:6) complete all as specified and as directed.

Supply and fixing 0.50 mm thick plain, galvanised, mild steel sheeting, with 275 grams per sqm zinc coating as in ridges, hips, valley gutters, drip & straight flashing etc complete all as specified and directed.

S&F 250 mm long aluminium anodised sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded section and fixing bolts and sliding bolts of extruded sections or cast aluminium complete all as specified and as directed.

S&F Extruded aluminium alloy handles 150mm long, fabricated type, anodised. complete all as specified and directed.

S&F Solid PVC door frame of size 50mm X 47mm made out of 5mm plain colour PVC sheet reinforced with MS Square tube, supplying and fixing in opening as per specification and drawing.

S&F Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing.

M/L for precast soild block massonary of PCC (1:3:6) type C1 (using 20 mm graded crushed stone aggregate) exe 10 CM width and setting in CM morter (1:6) complete all as specified and directed.

M&L 15 mm thick rendering plaster on fair faces of conc faces/ brick faces smooth without extra cement in CM 1:4 complete all as specified and as directed.

M&L for rendering 20mm thick in cement mortar 1:4 in two layers of 10mm each using WPC in finishing layer on brick or concrete surfaces finished even & smooth (WPC for finishing layer will be paid seperately as supply only).

M&L for preparation of new plaster surfaces and applying priming plastered and other surfaces with alkali resistance pimimg paint and aplying two coats of acrylic washable distemper on walls as specified and directed.

M&L Preparation of newly plastered surfaces of walls and applying two coats of cement based paint over a coat of suitable primer on new surfaces of walls all as specified and directed.

S&F in repairs Vitereous china squatting pan 'Orissa pattern' size 580 x 440mm white with integral foot rest excluding flushing cistern and flush pipe complete all as specified and as directed.

S&F in repairs PVC valveless, syphonic action type flushing cistern 10 ltr capacity low level, with inlet, ball valve float, flush pipe and handle including brackets.

S&F 15mm bore tubes medium grade galvanised with all fittings and fixed complete to walls and ceiling of laid in floors in repairs.

S&F 15mm bore dia Stop cock cast copper fancy type chromium plated alloy screwed down high pressure with crutch or butter fly handle serwed both ends for iron pipe or for unions complete all as specified and as directed.

S&F 15mm bore dia bib taps cast copper alloy chromium plated, fancy type with crutch or butter fly handle, screwed down, screwed for iron pipe or for brass ferrule & fixed complete all as specified and as directed.

S/F Pillar taps, cast copper alloy, with capstan heads, chromium plated,screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed complete all as specified and directed

M&L RCC (Nominal mix), ( 1:2:4) type B1 (using 20mm graded crushed stone aggr) as in Foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc.; basement slabs, under-reamed piles and mass concrete complete all as specified and as directed

M & L RCC (Nominal mix) (1:2:4) type B1 (using 20mm graded stone aggr) as in beams, cantilevers, lintel over 1.5 m span complete all as specified and as directed

M & L for formwork to sides and soffits for rough finished of floors or roof beams, lintels cantilevers, shelves including supports etc complete all as specified and as directed.

Material and labour 6 mm thick plywood, 5 ply, grade BWR type BB fixed with self screws to timber frame work in Wall/Ceiling complete all as specified and as directed.

M&L for PCC 1:3:6 type C-2 (using 40mm stone agg) as in surface channel / drains complete all as specified and directed by the Engr-in-Charge.

Extra for forming fair finished drain or channel 30 cm inner girth cement concrete using extra cement including forms moulds mitred and stopped ends etc complete all as specified and directed by the Engr-in-Charge.

E/M Portion: Taking down carefully copper / aluminium point wiring(light,fan,socket or power) complete along with fittings such as switches ,Sockets, ceiling rose , lamp holder ,tube light fittings and making good distrubed surfaces on walls etc complete all as specified and as directed.

Material & Labour for point wiring with 1.50 Sqmm (nominal cross sectional area) PVC insulated (FRLS) unsheathed single core multi stranded copper conductor cable of working voltage 1100 volts grade conforming to IS-694 Pt I & II of 2000 drawn through and including non metallic rigid PVC medium grade conduit and conduit accessories (ISI) Marked concealed in wall/fixed to roof, ceiling etc., including provision of 1.5 Sqmm (nominal cross sectional area) PVC insulated (FRLS) unsheathed single core multi stranded copper conductor cable as earth continuity conductor, fabricated sunken terminal box made out of 1.60mm thick sheet steel painted, concealed in walls, with 3mm thick bakelite/PVC sheet ISI marked top cover with brass chromium plated screws and cup washers for housing switches, socket outlets, fan regulators etc., connected to main switch / DBs or common earth dolly for light point/ fan point/ exhaust fan point/ call bell point/ controlled by one switch 5/6 Amp one way complete all as specified and as directed. Note: Red coloured cable shall be used for live connection, black coloured cable shall be used for neutral connection and green coloured cable shall be used for earthing. Separate cable for earthing and neutral to be used for each individual circuit from the distribution board.

All as per item No.111 here-in-before but for one socket outlet/metal clad socket of 5 Amps fixed on independent board with 1.5 Sq mm multistranded copper conductor wire FRLS PVC insulated and 1.5 Sq mm copper conductor wire FRLS PVC insulated using as earth wire complete all as specified and directed by Engineer-in-Charge

All as per item No.111 here-in-before but for one socket outlet/metal clad socket of 15 Amps fixed on independent board with 4 Sq mm multistranded copper conductor wire FRLS PVC insulated and 4 Sq mm copper conductor wire FRLS PVC insulated using as earth wire complete all as specified and directed by Engineer-in-Charge

S&F modular switch, flush type, 6 Amps, 230 volts, single pole, one way (ISI marked) comple all as specified and as directed.

S&F modular switch socket combination, 2 and 1, 3 pin, 5/6 Amps, multipurpose, flush, non shutter, non inter locking type, 230 volt flush type, white/ivory finish with two fixing hole including suitable gang box complete all as specified and as directe.

S&F modular switch socket combination, 2 and 1, 6 pin, 5/6 Amps and 15/16 Ampd, multipurpose, flush, non shutter, non inter locking type, 230 volt flush type, white/ivory finish with two fixing hole including suitable gang box complete all as specified and as directed.

S&F ceiling rose, PVC/carbonate insulated body, 3 terminal and 240 volts, ISI marked complete all as specified and as directed.

S&F sheet metal enclosure DB's 240 volts, IP-43, suitable for mounting MCB'"s SPN 8 ways with 200 Amps rated copper bus bard double door type complete and including taking down old DB with MCB complete all as specified and as directed.

S&F MCB single pole & neutral 63 Amps, 240 Volts, 10 KA rapturing capacity, 'C' Curve complete all as specified and as directed by Engineer-in-charge.

S&F MCB single pole 6 to 32 Amps, 240 Volts, 10 KA rapturing capacity, 'C' Curve complete all as specified and as directed by Engineer-in-charge.

S&F Lamp holder angular/straight insulated body, with back plate suitable for batten fittings, white/ivory finish complete all as specified and as directed.

S&F LED light fitting 1 x 18 W (4 FT), CRI >=80, CT >=5700K, wall/surface mounted, integrated type, constucted of fire retardant engineering grade extruded plastic & decorative end caps with integrated high efficiency electrocin driver & surge suppressor of 2 KV or more, luminaire efficacy > 95 lumens/Watt, power factor >/0.90, operating range - 140 to 270 V, 50 Hz fixed with suitable fixing arrangements complete including 01 No 18 W (4FT) LED lamp with all accessories internally prewired and includig connecting up with and including twin core twisted flexible copper conductor cable of suitable size complete all as specified and as directed. Make: Crompton cat part CCS-100-18-65-HILL-OP-NWH, Havells cat Part No- LUMILINEPLUSNEOBS18WLED 865SPCSSIND, Philips Cat part No. BN170CLED18S-6500PSUL 120P

S&F LED bulk head fittings of 10 watts, presure die cast housing acrylic diffuser and frame with IP 66 protection complete all as specified and as directed. Make: Crompton cat part LBHE-10-WW, Havells cat Part No. HEXAFT 10W LED 857SSYMBOPC, Philips Cat part No. WT202W LED65 NW PSU S2 PC.

S&F 250mm sweep exhaust fan PVC body model, 240 Volts, AC 50 Hz, with all accessories such as louvers, three core single core PVC insulated copper conductor of size 0.5Sqmm from ceiling rose to fan, incluidng cutting and fixing of fan and finishing the cutting surfaces even and smooth as per existing complete all as specified and as directed.

Supply, laying and testing of XLPE under ground cable of size 16 Sqmm 2 core, 1100 volt grade, insulated screened PVC bedded, galvanized steel strip or wire armoured, electric power cable (Heavy duty) with stranded aluminium conductor including connection with lugs, gland etc.complete including taking down old us cable/ACSR conductor all as specified and as directed.

M & L for earthing complete with galvanized steel earth plate electrode 600x600x6 mm thick, burried directly in ground (earth pit not less than 2.25 mtr deep below ground level) with top edge of the plate not less 1.5 mtr deep below normal ground level connected to GI earth wire 4 mm dia connected to earth plate by means of nut, bolts, check nut & washer of galvanized iron or of steel, GI earth wire will be protected by 15 mm dia GI pipe 'light grade', watering pipe 20 mm dia GI 'Medium grade', GI wire meshed funnel, alternate layer of char coal and salt on all side to earth plate upto thickness of 150 mm, filling of black cotton soil in earth pit upto ground level, PCC chamber recessed for and including RCC cover including all necessary excavation & earth work, earth wire connected to O/H continious earth wire on pole, testing the earthing after completion all as specified and shown in electric plate No 3 of MES SSR Part-I 1991 print complete all as specified and as directed.

M & L for point wiring with 1.5 Sqmm PVC insulated unsheathed single core stranded copper conductor (FRLS) Cable of working voltage 1100 Volts grade conforming to IS-694 pt-I & II of 2000 drawn in and including 25 mm size PVC rigid non matellic casing caping (Double lock) with all casing capping fittings & accessories with PVC Box backelite sheet fixed with brass screws & cup washers including 1.5 sqmm PVC insulated unsheathed single core stranded copper conductor (FRLS) cable as earth continuity conductor connected to main switch / DB's or common earth dolly complete for for light point/ fan point/ exhaust fan point/ call bell point/ controlled by one switch 5/6 Amp one way complete all as specified and directed.

All as per item Sl No 127.00 here-in-before but one switch socket outlet point 5/6 Amps on same board

All as per item Sl No 127.00 here-in-before but one switch socket outlet point 5/6 Amps on independent board

All as per item No.127 here-in-before but for one socket outlet of 15 Amps fixed on independent board with 4 Sq mm multistranded copper conductor wire FRLS PVC insulated and 4 Sq mm copper conductor wire FRLS PVC insulated using as earth wire complete all as specified and directed by Engineer-in-Charge.

S&F modular switch piano flush button, single pole one way, 5 Amps complete all as specified and as directed.

S&F modular switch socket combination, 5-in-1, 5/6 Amps complete all as specified and as directed.

S&F modular switch socket combination, 5-in-1, 15/16 Amps complete all as specified and as directed.

Supply and fix in replacement of 20 W LED tubelight fitting with lamp,Extruded aluminium, PC Diffuser, efficiency >125 lm/ W, glare free, THD<10%,Potted electronic driver connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified and as directed.

Supply and fix aesthetically designed 2X2 LED flat panel for ceiling mounting which provides soft light and glare free illumination not less than 36 watt,efficiency >125 lm/ W, including and connecting up all as specified and as directed. Make: Crompton cat part TCR-145-36-65-SL-NWH, Havells cat Part No. VENUSNEO2x2PLR36WLED865PO, Philips Cat part No. RC360B LED 36S-6500 V1 L60W60 PSU OD.

M&L for concealed sub-main wiring along with earth wire of size of 2 x 6.0 sq mm + 1 x 6.0 sq mm earth wire, ISI marked FRLS,PVC insulated, multi stranded, copper conductor, single core cable drawn through and incl PVC rigid conduit (medium grade) with all fittings and accessories ISI marked including cutting chases for conduits & sinkings for sunken boxes & making good to walls, floors etc complete including taking down old unserviceable one all as specified and as directed.

S&F MCB DB SPN 8 Ways double door, IP-42, IK-09 with metal door, rated bus bars, earth bar, neutral links complete incl blanking plates as required & fixed flush to wall/other surface complete all as specified and as directed.

Supply and fix of exhaust Fans, 300mm sweep 1200 rpm, heavy duty, AC single phase, 230 volts including louver connection with multistranded copper conductor flexible wire of suitable size from ceiling rose, necessary fixing arrangement i.e anchor nut, bolt, washer and grouting and making good to disturbed surface complete all as specified and as directed. Make : Havells//Khaitan/Almonard/Bajaj/Crompton Greaves

S&F MCB single pole & neutral 40 to 63 Amps, 240 Volts, 10 KA rapturing capacity, 'C' Curve complete all as specified and as directed by Engineer-in-charge.

M/S ANIL KUMAR THAKUR (BID ID -3110089)

KAMLESH ENTERPRISE (BID ID -3103179)

M/S S. S CHETTRI AND SONS (BID ID -3106660)

DHARMINDER SINGH (BID ID -3108774)

BIJAY MITTAL (BID ID -3108145)

RAAJ BANGAR (BID ID -3106097)

KARMA TSETEN BHUTIA (BID ID -3106192)