Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹39.9 LAccepted-AOC OPP CCS GARACHARMA PORT BLAIR 744105 | SOUTH ANDAMANS | ANDAMAN AND NICOBAR ISLANDS | 744105 | L1 | Accepted-AOC L1 | |
| 2 | L2₹41.4 L+₹1.1 L (2.70%)Rejected-AOC | L2 | Rejected-AOC L2 | |
| 3 | L3₹42.3 L+₹2.0 L (4.96%)Rejected-AOC | L3 | Rejected-AOC L3 | |
| 4 | L4₹44.9 L+₹4.5 L (11.3%)Rejected-AOC NEAR PLAY GROUND BIRDLINE CALICUT POST PORT BLAIR 744105 | SOUTH ANDAMANS | ANDAMAN AND NICOBAR ISLANDS | 744105 | L4 | Rejected-AOC L4 | |
| 5 | L5₹46.2 L+₹5.8 L (14.5%)Rejected-AOC | L5 | Rejected-AOC L5 |
Tender Value
Refer Docs
EMD Value
₹80,000
Closing Date
11 Aug 2022, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE Brichgunj
GE Brichgunj, Port Blair
WELCOME MAINT INCL ALLIED SERVICES TO MD ACCOMODATION UNDER AGE B/R-II SUB-DIVISION OF GE BRICHGUNJ , PORT BLAIR
2022_MES_539813_1
8245A
Open Tender
Civil Works
Item Rate
270 days
GE Brichgunj
As per tender documents
8 documents required · 8 mandatory
₹500
GE Brichgunj
₹80,000
Yes
24 Aug 2022
22 Jul 2022
13 Aug 2022
22 Jul 2022
11 Aug 2022
5 Aug 2022
60 days
Amount
Dismantling of floor, hearth or wall tilling incl CM bedding (but not backing) and removing the rubbish off the premises complete all as specified and as directed.
M&L for coloured non skid joint free ceramic tiles 7 to 8mm thick (square/rectangular) area of each tile exc 0.06 sqm n.exc 0.11 sqm, in floors etc set and jointed in neat cement slurry in floors and pointed with coloured cement to match the colour of tiles incl screed bed or bedding layer of morter 15mm thick for laying floor finishes complete all as specified and as directed.
M&L for coloured non skid joint free ceramic tiles 7 to 8mm thick (square/rectangular) area of each tile exc 0.11 sqm n.exc 0.18sqm, in floors etc set and jointed in neat cement slurry in floors and pointed with coloured cement to match the colour of tiles incl screed bed or bedding layer of morter 15mm thick in CM 1:6 for laying floor finishes complete all as specified and as directed.
S & F coloured glazed joint free ceramic tiles 450mm x 300mm x 7mm thick on vertical surfaces such as skirting & dados etc set and jointed in neat cement slurry and pointed in white cement mixed with pigment to match with surfaces etc including backing coat of 10mm thick CM 1:3 complete all as specified and as directed.
M & L for granite slab 20 mm thick as in cooking platforms, bedded 15mm thick ,in cement mortor 1:4 and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including cutting and polishing complete all as specified and as directed
Demolition of RCC in slabs, shelfs,chajjas, fins, fascia column edges including cutting reinforcement etc, complete all as specified and as directed.
M&L Formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick (Horizontal or sloping) complete all as specified and as directed.
M & L for RCC M-30 (using 20mm graded stone aggregate) as in slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like etc,complete all as specified and as directed.
M&L for mild steel TMT bars 10 mm dia., and over cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with mild steel wire (annealed) not less than 0.9 mm dia., or securing with clips, complete all as specified and as directed.
M&L for mild steel TMT bars 6 to 8 mm dia., and over cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with mild steel wire (annealed) not less than 0.9 mm dia., or securing with clips, complete all as specified and as directed.
Demolition of block masonry work set in cement mortar of any description complete all as specified and as directed.
M & L precast cement concrete block masonry (1:3:6) type C1 (20mm graded aggregate) masonry with solid block exc10cm in width and setting in CM 1:6 etc complete all as specified and directed.
S&F in repairs for false ceiling with aluminium grid work (size of grid 605x605mm) with 35x25x1.5mm main tee and 25x25x1.4mm, cross tee and wall angle and suspended with 3.15mm dia, GI wire, hooked to roof with needful adjustment bolts at an interval of 1.20m, centre to centre staggered and board with Eco board, decorative type, size 600x600x4mm thick, finished with two coats of oil bound distemper over a coat of primer on exposed surfaces, complete all as specified and as directed.
S&F in repairs Eco board 600 X 600 X 4mm thick decorative type fixed in aluminium frame work with screws or nails etc including two coats of oil bound distemper over a coat of primer complete all as specified and as directed.
S&F in repairs stainless steel CP coated decorative type curtain rod incl decorative brackets etc complete all as specified and as directed.
S&F plastic seat cover EWC solid type closet set white colour complete all as specified and as directed.
S&F in repairs,10 litre capacity,PVC flushing cistern,white,syphonic action type low level,with in let ball valve float and handle,PVC flush pipe,brackets etc including taking down unserviceable flushing cistern etc, complete all as specified and as directed
S&F in repairs Health faucet (ABS body) mild steel chromium plated suitable for 15mm dia pipe with 1.25m long flexible tube and ABS wall hook including making connection and fixed in position complete all as specified and as directed
S&F in repairs Hand shower (Jaquar) complete all as specified and as directed
S&F in repairs Bib Tap cast copper ally chromium plated 15mm dia with crutch or butterfly handle screwed down screwed for union pipe or brass ferrule etc complete all as specified and as directed.
S&F in repairs Stop Valves but fancy type chromium plated with long shank and cup concealed type 15mm dia bore pipe complete all as specified and as directed.
S&F in repairs Angular Stop Valves but fancy type chromium plated 15mm dia bore pipe complete all as specified and as directed.
M&L for one coat of oil bound distemper incl preparation of surfaces on old decorated, plastered or unplastered surfaces of wall complete all as specified and as directed.
M&L for two coat of oil bound distemper incl preparation of surfaces on old decorated, plastered or unplastered surfaces of wall complete all as specified and as directed
M&L for One coat of oil bound distemper as in ceilings/false ceiling incl preparation of surfaces on old decorated, plastered or unplastered surfaces complete all as specified and as directed.
M & L for preparation of old wall surfaces and applying one layer of internal wall putty, complete all as specified and as directed. (Make: Birla / JK wall putty or equivalent)
M&L for painting with synthetic enamel paint one coat incl preparation of old painted wooden surfaces exc over 10cm width or girth complete all as specified and as directed.
M&L for painting with synthetic enamel paint one coat incl preparation of old painted steel surfaces over 10cm width or girth complete all as specified and as directed.
Taking down cement plaster of any description from wall/ceiling including raking out joints hacking for key, scrubbing down with water etc, complete all as specified and directed.
M&L rendering 10 mm thick on fair faces of brick work or concrete surfaces in cement mortar 1:6 and finished even and smooth without using extra cement complete all as specified and as directed.
M&L for rendering 5 mm thick in CM 1:3 finished even and smooth without using extra cement on ceiling surface complete all as specified and as directed.
M&L for removing loose and broken concrete by chiselling /picking etc upto a depth of 10 to 30 mm from floor/roof slab/chajjas and similar structural members cleaning the dismantled portion with wire brushes etc to remove dust, dirt and other foreign particles including necessary scaffolding etc and removal of debris to a distance not exceeding 50m, complete all as specificed and as per directed.
M&L for application of high build polymer cement sand mortar 1:3 with water cement ratio 0.35 to 0.45 mixing with Nito bond SBR @ 5 ltrs per 50 Kg cement on ceiling / chajja surfaces 10 to 30mm thick in two layers over slurry priming coat of 1 volume Nito bond SBR to 1 volume water, 3 volume fresh cement (5 sqm per litre Nito Bond SBR) etc all as per manufacturers instructions, including painting/finishing to match with the existing complete all as specified and as directed.[ Note : Nitobond SBR shall from Fosroc chemical (India) Pvt Ltd or equivalent chemicals of MC Bouchemics/Beck]
M & L for two coats of Oil bound distemper on newly plastered surfaces of walls over a coat of alkali resistant primer including nesessary preparation of surfaces complete all as specified and as directed.
M & L for two coats of oil bound distemper on newly plastered surfaces of ceiling over a coat of primer including nesessary preparation of surfaces complete all as specified and as directed.
Taking down chowkats or frames with shutters area n.exc 1.5 Sqm each(without taking off shutters from the frame) complete all as specified and as directed.
All as per Item No. 36 above but are exc 1.5 Sqm but n.exc 4.00 Sqm complete all as specified and as directed
Taking down Shutters of any description n exc 1 sq. m each complete all as specified and as directed
Taking down shutters but exc 1 sq. m and n exc 2 sq. m each complete all as specified and as directed
Taking down shutters of any description n exc 1 Sqm each and refixing in same opening including taking down, easing and adjusting and also refixing builders hardware as required including renewal of unserviceable screws, etc. complete all as specified and as directed
Taking down shutters of any description exc 1 Sqm and n exc 2 sqm each and refixing in same opening including taking down, easing and adjusting and also refixing builders hardware as required including renewal of unserviceable screws, etc. complete all as specified and as directed
S & F Aluminium anodised (minimum anodisation is 15 microns) Door / window / Ventilator/partition frames and shutters (02 Nos glazed & gauzed), side hung type, without sash bars, standard aluminium grills, necessary joining cleats, glazing clips, rubber packing, sliding wheel, anodised aluminium snap beading, screws, handles, locking arrangement etc, complete with standard aluminium sections, all as specified and as directed by Engineer-in-charge.(Aluminium section shall be of make Jindal/Hindalco/ Indalco) including taking down aluminium windows. (Note:- Weight of various Aluminium sections shall only be considered for measurement for payment. However cost of rubber packing and sliding wheel given in the item shall be deemed to be included in the rate quoted. Glass panels, prelaminated particle boards, aluminium wire cloth as applicable will be measured and paid separately as supplied only).
S&F powder coated aluminium grill of design DG-104 pattern, fixed with U channel complete all as specified and as directed
Taking down PVC door including frame above n.exc 1.5 Sqm complete all as specified and as directed
Taking down PVC door shutter exc 1 Sqm and n.exc 2 Sqm complete all as specified and as directed
S&F solid PVC Door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube, supplying & fixing in opening as per specification & drawing in SSR complete all as specified and directed
S&F factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of MS tubes for top & bottom rails. MS frame shall be covered with heat moulded plain colour PVC `C' channel having PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; panelling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, supplying & fixing in the frame at site as per specification & drawing in SSR complete all as specified and directed
S & F 4 mm thick sheet glass ordinary quality and glazing with oil putty in squares not exceeding 0.5 Sqm in each pane complete all as specified and as directed.
Supply only 4 mm thick ACP board (Aluminium Composite Panel ) fixed to aluminium frames complete all as specified and as directed
Supply only aluminium alloy wire mesh 0.45mm nominal dia of wire and average width of apeture 1.4mm fixed with aluminium wire staples etc.complete all as specified and as directed
Supply and fix in repairs to aluminium alloy wire mesh 0.45mm nominal dia of wire and average width of apeture 1.4mm fixed with aluminium wire staples etc.complete all as specified and as directed.
S&F in repairs sheet glass ordinary quality and glazing with oil putty /wdn beads in square n.exc.0.50sqm in each pane 4 mm thick plain glass on new or old windows incl hacking out old complete all as specified and directed.
S & F in repairs 12 mm thick Prelaminatd particle board, interior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination and fixed to aluminium frames complete all as specified and as directed.
S&F in repairs sinks with drainage board made of stainless steel 1mm thick kitchen or laboratory with plugs waste/coupling incl fixing cnatilever bracket and connecting to union pipe overall size 915mm x 460mm bowl size 410mm x 330mm x 160mm complete all as specified and as directed.
S&F in repairs stainless steel plate rack of size 750 x 787mm with all fittings complete all as specified and as directed.
S&F in repairs PVC connection 15mm size with CP brass nuts legnth 450mm complete all as specified and as directed.
S&F in repair 19mm thick pre laminated particle board exterior grade pre-laminated on both side with decorative choice lamination fixed with as in pelmet box/wardrobe shutter etc all as specified and as directed
S&F 2nd class hardwood, plain, solid, straight chowkats and frames wrought, framed, rebated on the solid, rounded or chamfered, put together with glue, pinned at joints complete all as specified and as directed.
S&F 2nd class hard wood 35 mm thick, plain, framed, panelled shutter ( any number of panels) with panels of timber flat on both sides ( feather edged), or of veneered particle board medium density, wood particle board with commercial face veneers, the sizes of members of shutters shall be specified and as directed.
S&F 2nd class hardwood 35mm thick glazed and skeleton shutters, open rebated and prepared to receive glass, gauze etc (without sash bars) edges of framing plain, chamfered or rounded, fitted with cut and mitred beads of securing glass, gauze etc and fitted to chowkats complete all as specified and as directed.
M&L for preparation of new wooden surface of any description over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed.
S & F aluminium, anodised, barrel tower bolt of extruded section, 150 mm long, complete all as specified and as directed.
S & F aluminium, anodised, barrel tower bolt of extruded section, 100 mm long, complete all as specified and as directed.
S & F in repairs aluminium, anodised, barrel tower bolt of extruded section, 150 mm long, complete all as specified and as directed.
S & F in repairs aluminium, anodised, barrel tower bolt of extruded section, 100 mm long, complete all as specified and as directed.
S&F in repairs 150mm long aluminum alloy anodised handle extruded section, fabricated type,, complete all as specified and as directed
S&F in repairs 100mm long aluminum alloy anodised handle extruded section, fabricated type,, complete all as specified and as directed.
S&F 150mm long aluminum alloy anodised handle extruded section, fabricated type, complete all as specified and as directed.
S&F 100mm long aluminum alloy anodised handle extruded section, fabricated type, complete all as specified and as directed
S&F Butt hinges, 100mm length C-21 type extruded aluminium alloy with galvanised mild steel hinge pin, anodised and fixed , complete all as specified and directed
S&F Butt hinges, 75mm length C-21type extruded aluminium alloy with galvanised mild steel hinge pin, anodised and fixed , complete all as specified and directed
S&F in repairs Butt hinges, 100mm length C-21 type extruded aluminium alloy with galvanised mild steel hinge pin, anodised and fixed , complete all as specified and directed
S&F in repairs Butt hinges, 75mm length C-21 type extruded aluminium alloy with galvanised mild steel hinge pin, anodised and fixed , complete all as specified and directed
S&F in repair Chromium plated shower arm15mm size, 195mm long with bend of 45 degree with flange of PTMT any colour (Minimum weight 40 gm),complete all as specified and as directed
S&F in repair Brass Chromium plated shower rose 125mm size, with swivel joint, fixing to steel pipe or union,complete all as specified and as directed
S&F in repairs stainless steel gratings 125mm dia, complete all as specified and as directed
S&F in repairs vitreous China wash hand basin of size 550 x 400mm white flat back including chromium plated pillat tap, waste coupling, including brackets, PVC waste pipe, including cutting for and pinning in ends of brackets or errecting stand, complete all as specified and as directed
S&F in repair 15mm bore pillar tap, cast copper alloy with capstan heads, chromium plated screwed down, high pressure, with or without lettered hot or cold with long screwed shanks and fly nuts screwed for iron pipes complete all as specified and as directed
S&F in repair vitreous china EWC white including flush pipe, seat cover etc, including connection to drain (or out going pipe) and to flushing pipe anti syphonage pipes etc complete all as specified and as directed
S&F in repairs cast copper alloy, chromium plated hot and cold 15mm dia wall mixer 3-in-1 system with provision for both hand shower and overhead shower complete with 115mm long bend pipe, connecting legs & wall flange complete all as specified and as directed. [excluding hand & overhead shower]. [Cat No. CON-281KN of make: Jaquar or equivalent in Marc/ Plumber]
S & F in repair PVC waste pipe, 32mm dia, for WHB, complete all as specified and as directed
S & F in repair PVC waste pipe, 40mm dia for sink, complete all as specified and as directed
Taking up or down, 15 mm dia bore, GI tubing, medium grade, including removal from site, complete all as specified and as directed
Supply and laying 20mm external dia CPVC pipes SDR11 including Plain CPVC fittings SDR11 fittings which do not have any metal component and is jointed with CPVC solvent cement only as on walls/ceiling/floors complete all as specified and as directed
S & F in repairs brass chromium plated tubular towel rail 20mm dia, D type, 60cm long between flanges complete all as specified and as directed.
S & F in repairs two way bib cock, brass chromium plated complete all as specified and directed.
Priya construction
Nirman Construction Company
M/s Saina Enterprises
P Babu
M/s Kamal Electrical
S K ENTERPRISES
ANITA VARMA ENTERPRISES
stage.html
html • 0.06 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .